Universal Electronics
Potenza ST
Backlit Remote
Control
Version 1.0
(August 2013)
The Remote
IPTV Middleware Version 7.0 Page 5
Playback Controls
Your remote control offers standard capabilities, as well as enhanced remote control buttons that function
similarly to DVD controls.
Here’s what each button does:
List Select to see a list of recorded programs. Press the LIST button a second time
to see what is scheduled to be recorded. Press LIST a third time to access your Series
Rules.
Live Select to return to the current part of a live broadcast.
Skip Forward Skip forward 30 seconds while watching a recording or live TV.
Skip Back Skip backward ten seconds while watching a recording or while
watching live TV.
Play Begin or resume watching a recording. Also display/remove the status bar.
Fast Forward Fast forward through parts of a recording. Press multiple times to
go forward faster.
Record Record a program
Pause Pause the program you are currently watching. While paused, the Fast-
Forward button will play the program frame by frame in slow motion.
Stop Stop watching a recording or stop a recording that is in progress.
Rewind Rewind through parts of a recording. Press multiple times to rewind faster.
Guide Access the program Guide. Press a second time for alternate view.
S B
E R
A O
R W
C S
H E
Arrows/Browse/Search/OK Press to navigate through the guides, menu options
or to make selections.
IPTV Middleware Version 7.0 Page 6
PROGRAM YOUR REMOTE CONTROL
This remote control is already pre-programmed to control your Set Top Box
(STB). The instructions below will program this remote to control your TV.
1. Manually turn ON the TV that
you want to setup on the
remote
2. Press and Hold until the
TV key blinks twice
3. Press and release the TV key.
The TV key will stay lit.
4. Find your TV and brand from
the chart below and note the
DIGIT key assigned to your
brand. Press and hold down
the DIGIT key for your
device/brand while pointing
the remote to the device.
5. Let go of the key when your
device turns OFF. Setup for
that device is complete.
To program this remote control to
your other devices ,
see the instructions below the
table.
TV
DVD/VCR
Audio
DIGIT
BRAND
DIGIT
BRAND
DIGIT
BRAND
1
Insignia
1 Insignia
1 Bose
2
LG 2
LG 2
Denon
3
Panasonic
3 Panasonic
3 LG 4 Philips/Magnavox
4 Philips, Magnavox
4 Onkyo
5
Samsung
5 RCA 5
Panasonic
6
Sanyo 6
Samsung
6 Philips
7
Sharp 7
Sharp 7
Pioneer
8
Sony 8
Sony 8
Samsung
9
Vizio 9
Toshiba
9 Sony
0
Westinghouse
0 VIZIO 0
Yamaha
*If you model of device is not on this list, please call _______________________ for a list of
additional device codes.
Unlocking the Default Setting to Make AUD, DVD, and VCR
Buttons Programmable
The AUD, DVD and VCR mode keys have a default setting which means they are
automatically set to the STB. If you would like to program these mode keys to
your devices, please follow the instructions below to lock the default setting.
1. Press and Hold until the mode key blinks twice.
2. Type .
3. Then press the mode key you desire to program
twice.
4. This will remove the STB mode and a new Audio, DVD or VCR code
can now be programmed.
5. Follow steps 1 through 5 on the first page of this brochure replacing
the word “TV” with the name of the mode key you just unlocked.
PROGRAMMING DEVICE CONTROL
The Potenza ST Universal Remote Control is preprogrammed to operate the set-top box provided by your television
service provider, an RCA TV, a Toshiba DVD player, an RCA VCR, and a Pioneer audio receiver. To control devices
other than the default brands, perform the following steps; otherwise skip this section.
NOTES: For control of a Combo device (for example, a TV/VCR combo), skip this section and per-form
the instructions on “Setting Up a Combo Unit” on page 9. Also refer to “Device Table” on page 7 to find
out which devices can be programmed onto each device key. If you have another brand of set-top box you
would like to control, you’ll need to unlock the STB ID Lock before changing the set-top box code (see
“Programming ID Lock” on page 12).
1. Turn on a device and, if applicable, insert video media, (e.g., cassette or disc).
NOTE: Please read steps 2 through 5 completely before proceeding. Highlight or write down the codes
and device you wish to program before moving on to step 2.
2. On the remote control, press a device key once (i.e., VCR, DVD, AUD, TV, or STB ); it will blink once.
3. Press and hold SETUP until the selected mode key blinks twice, then release SETUP .
4. Use the “Manufacturer’s Codes” starting on page 17) to locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly, the selected mode key will blink twice.
NOTE: If the selected mode key emits a long blink, the entry is invalid. Repeat steps 2 through 4 and try
entering the same code again.
5. Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat
steps 2 through 4, trying each code for your brand until you find one that works. If it still does not respond, try
searching for the code (see “Searching for Your Code” on page 9).
NOTE: If the device does not have a POWER key (e.g., DVD and VCR) , press the (Play) key.
6. Repeat steps 1 through 5 for each device you want the remote control to operate. For future reference, write down
each working device code in the boxes below.
TV Code AUD Code DVD Code AUD Code STB Code
Device Type:
Code
8
SETTING UP A COMBO UNIT
If you own a combo unit such as a TV/VCR Combo or a TV/DVD Combo, you need to follow special steps to set it up.
Perform the following instructions to control combo device:
1. For a TV/VCR Combo, turn on your TV/VCR Combo and insert a video cassette. (For a TV/DVD Com bo, inser t
a DVD).
2. On the remote control, press VCR once; it will blink once. Then press and hold SETUP until the VCR
key blinks twice.
3. Use the “Manufacturer’s Codes” starting on page 17 to locate the brand name and enter the first four-digit code
for your combo device (for example, TV/VCR). If you perform this procedure correctly, the VCR key w ill blink
twice.
NOTE: If the VCR key did not blink twice after entering the codes last digit, repeat steps 2 through 3
and try entering the same code again. If you’ve located a setup code that works for your combo device (for
example, a TV/VCR Combo) and a separate TV code is also listed, you’ll need to program this code into
the remote control to access volume control ( see “Programming Device Control” starting on page 8).
4. Aim the remote control at your combo device (for example, TV/VCR Combo) and press POWER once. The
device should turn off. If it does not respond, repeat steps 2 through 3, trying each code listed for your brand until
you find one that works. If it still does not respond, try searching for the code (“Searching for Your Code” starting
on page 9).
5. For future reference, write down each working device code in the boxes below:
TV Code TV/VCR Code TV/DVD Code
Device Type:
Code
SEARCHING FOR YOUR CODE
If your home entertainment device does not respond to the Potenza ST Universal Remote Control after trying all of the
codes listed for your brand, or if your brand is not listed at all, try searching for your code. For example, to search for a
code for your TV:
1. Turn on your TV.
2. On the remote control, press TV once; it will blink once. Then press and hold SETUP until the TV key
blinks twice.
3. Type 9 9 1 . The TV key will blink twice.
4. Aim the remote control at the TV and press POWER once.
5. Press and release the CH+ key continuously, then stop when the TV turns off.
NOTE: In the search mode, the remote control will send IR codes from its library to the selected device,
starting with the most popular code first.
6. Press POWER . The TV should turn on, then press SETUP once to lock in the code. The LED will blink
twice to indicate that the code is saved.
NOTE: If the TV does not turn on during step 6, then slowly press and release CH- to go back through
the codes, then press SETUP when the TV turns on.
9
7. To search for the codes of your other devices, repeat steps 1 through 6, but substitute the appropriate key (e.g.,
TV, AUD, DVD, AUX, or STB ) for the device you are searching for.
PROGRAMMING MASTER POWER KEY
The Potenza ST Remote Control has a unique feature that allows you to sequentially turn up to
five of your home entertainment devices on or off with a single key press.
Note: The Master Power (POWER) only works in STB mode. If it is not programmed, only the
set-top box will turn on or off. In any other mode, pressing Master Power (POWER) once will
turn the selected device on or off.
Programming the Master Power Key
1. Press and hold SETUP key until the last device key blinks twice.
2. Enter 9 9 5 and release.
Note: The LED will blink 2 times after any three-digit programming sequence is entered correctly
3. Press POWER once.
4. Press device keys you want in the power sequence (STB, TV, AUD, DVD, VCR).
5. Press and hold SETUP key until the last device key blinks twice (3 seconds). To
play back the power sequence, press the POWER key while in STB mode.
Clearing the Master Power Key
1. Press and hold SETUP key until the last device key blinks twice.
2. Enter 9 9 5 and release.
Note: The LED will blink 2 times after any three-digit programming sequence is entered correctly
3. Press POWER key and release.
4. Press and hold SETUP key until the STB key blinks twice (3 seconds).
PROGRAMMING CHANNEL CONTROL LOCK
By default, the remote control’s channel-control capabilities are not locked to the set-top box
mode. However, you can activate the feature to lock these keys to the STB Mode. This will
guarantee you do not inadvertently change a channel on your TV or VCR.
The affected keys are 1 through 0, CH+, CH-, and LAST.
Locking Channel Control (to a Source Mode)
1. Press and hold SETUP key until it blinks twice.
2. Enter 9 7 3 and release.
Note: The LED will blink 2 times after any three-digit programming sequence is entered correctly.
3. Press the CH+ key and release.
4. Press the STB device key to lock channel control to the STB mode.
*Default channel control lock is in unlocked state.
Un-Locking Channel Control
1. Press and hold SETUP key until it blinks twice.
2. Enter 9 7 3 and release.
Note: The LED will blink 2 times after any three-digit programming sequence is entered correctly.
3. Press the CH- key and release.
*Default channel control lock is in unlocked state.
PROGRAMMING VOLUME LOCK
Volume Lock allows you to control the volume through the device identified as having your
primary speakers(s), regardless of which mode you are using. On the Potenza ST Remote by
default the global volume Lock is set to TV, so you can control TV volume while in the TV, DVD,
AUX, or STB mode. The volume lock feature is programmable. Perform individual Volume
Unlock on a selected device to set its volume control for independent operation.
NOTE: The audio mode’s (AUD) volume controls are active regardless of Volume Lock settings. However, if you
lock the volume controls to the AUD mode, you will control the audio device’s volume in all other modes (i.e. TV,
DVD, AUX, or STB). This can be an advantage if, for example, you always listen to home entertainment devices
through your device’s speakers.
Programming Global Volume Lock
The user can globally lock the volume controls to one source mode (Device Key):
1. Press and hold SETUP key until the device key blinks twice.
2. Enter 9 9 3 and release.
Note: The LED will blink 2 times after any three-digit programming sequence is entered correctly.
3. Press VOL + key and release.
4. Press Device Key you want to be the master audio source (TV, AUD).
Programming Global Volume Unlock
The user can reset the volume controls to that one source mode:
1. Press and hold SETUP until the device key blinks twice.
2. Enter 9 9 3 and release.
Note: The LED will blink 2 times after any three-digit programming sequence is entered correctly.
3. Press VOL - key and release.
Programming Single-Device Volume lock
1. Press the desired Device Key (TV, AUD) to lock the volume to and release.
2. Press and hold SETUP key until it blinks twice.
3. Enter 9 9 3 and release.
Note: The LED will blink 2 times after any three-digit programming sequence is entered correctly.
4. Press the Device Key (STB, TV, AUD) that you want to have the volume control locked
to
the device selected in step 1.
5. Press SETUP and release.
Note: The last selected device LED will blink 2 times if programming sequence is entered correctly.
Note: After you select a device that has volume unlocked (i.e. STB), pressing VOL+, VOL-, or Mute, will control only that
device’s volume.
CHECKING THE CODES
If you have set up your remote control by searching for your device code (previous section), you may need to find out
which four-digit code is operating your equipment. For example, to find out which code is operating your TV:
1. On the remote control, press TV once; it will blink once. Then press and hold SETUP until the TV key blinks
twice.
2. Enter 9 9 0 . The TV key will blink twice.
3. To view the code for the first digit, press 1 once. Count the number of times the TV key blinks (e.g., 3 blinks =
3) and write down the number in the left most TV Code box above.
NOTE: If a code digit is 0, the selected mode key will not blink.
4. Repeat step 3 three more times for the remaining digits. Use 2 for the second digit, 3 for the third digit, and 4
for the fourth digit. Finish writing down the code in the TV Code boxes above
5. To check for other device codes, repeat steps 1 through 4, but substitute the appropriate key (e.g., TV, AUD,
DVD, AUX, or STB ) for the device you are checking. Write down the codes in the appropriate boxes above.
USING LEARNING
The Potenza ST Universal Remote Control includes a Learning feature (not available on all models) so you can add
functions that are unique to your home entertainment devices (e.g.,VCR Tracking Up or Down).
However, there are some considerations.
Learning Precautions
• Your original remote controls must be in working order for learning to work properly.
• Learned keys are mode-specific, so each one can store a unique function for each mode.• Do not use the following
keys for learning: Device Keys, SETUP, Record (•), Tune-In Keys .
• Learning capacity is approximately 16 to 25 keys, depending on the code being learned.
• Certain device functions are not learnable including multi-frequency types, some high frequency ones, and other
unusual formats.
• For optimum learning, avoid high levels of ambient light such as natural sunlight or energy-efficient fluorescent
lights.
• Please have your original remote controls NOTE: handy before programming learning.
Programming a Learned Key
NOTE: If more than 15 seconds pass between key presses, the remote exits programming.
1. Press and hold SETUP until the last-selected mode key blinks twice, then press 9 7 5 .
NOTE: If the LED displays one long flash instead, either your batteries are low, or the Potenza ST
Universal Remote Control has a memory fault.
2. Press a mode key once (i.e., TV, AUD, DVD, AUX, or STB ) to assign a mode for learning.
3. Press the desired key on the Potenza ST once to store the feature to be learned.
4. Place the Potenza ST Remote Control head-to-head (about 2" apart) from your original remote control . Also
locate the key (on your original remote control) that you want the Potenza ST Universal Remote Control to learn.
5. On the original remote, press and hold the key to be learned. The Potenza ST Remote Control’s LED will blink
10
rapidly, then turn off. Continue holding the key on the original remote until the LED blinks twice.
6.
NOTE: If the LED displays one long blink, a learning error has occurred. Try repeating this step again
until a successful capture occurs. If the function is still not captured, press and hold SETUP to exit
programming and review the “Learning Precautions” on the previous page. If needed, also see
“Troubleshooting” on page 15. After review, start programming again at step 1.
Repeat steps 2 through 5 for another mode and/or key or press and hold SETUP until the active mode key LED
blinks twice to exit programming.
Deleting a Single Learning Key
This process returns the key to its original programming for the mode you select. You can also delete learned
programming by teaching a different function to the key (see “Programming a Learned Key” on page 10)
1.
2.
3.
4.
NOTE: If more than 15 seconds pass between key presses, the remote exits programming.
Press and hold SETUP until the last-selected mode key blinks twice, then press 9 7 6 .
Press a mode key once (i.e., TV, AUD, DVD, AUX, or STB ). The LED on the selected mode key will blink
once.
Press the key containing the learned function to be deleted twice. The active MODE key will blink twice.
Repeat steps 2 through 3 for another key or press and hold SETUP to exit programming.
Deleting All Learned Keys in a Specific Mode
1.
2.
3.
NOTE: If more than 15 seconds pass between key presses, the remote exits programming.
Press and hold SETUP until the last-selected mode key blinks twice, then press 9 7 6 .
Press a mode key twice (i.e., TV, AUD, DVD, AUX, or STB ) to clear all the learned keys for that mode. The
mode key LED blinks twice.
Repeat step 2 for another mode or press and hold SETUP to exit programming.
11
TROUBLESHOOTING
PROBLEM: Device key does not blink when you press a key.
SOLUTION: Replace the batteries with two (2) new AA batteries (see “Installing Batteries” on page 8).
PROBLEM: Device key blinks when you press a key, but home entertainment device does not respond.
SOLUTION: Make sure you are aiming the remote control at your home entertainment device and that you are
within 15 feet of the device you are trying to control.
PROBLEM: The remote control does not control home entertainment devices or commands are not performing
properly.
SOLUTION: Try all listed codes for the device brand being set up. Make sure all devices can be operated with an
infrared remote control.
PROBLEM: TV/VCR Combo does not respond properly.
SOLUTION: Use the VCR codes for your brand. Some combo units may require both a TV code and a VCR code for
full operation (see page 9).
PROBLEM: No volume on a second TV.
SOLUTION: Follow instructions under “Changing Volume Lock” on page 12.
PROBLEM: PLAY and STOP keys do not work on a Motorola DCT-2000 cable converter.
SOLUTION: Re-program the STB key for cable code 0476 (see “Programming Device Control” on page 8).
PROBLEM: Tried Search Method and still could not find a working code.
SOLUTION: Try the Search Method again after clearing out the device key as follows:
a. Press and hold SETUP until device key blinks twice.
b. Enter 9 9 2 .
c. Press and release the device key to be cleared twice.
PROBLEM: Remote control does not turn on Sony or Sharp TV/VCR Combo.
SOLUTION: For power on, these products require programming TV codes on the remote control. For Sony, use TV
code 0000 and VCR code 0032. For Sharp, use TV code 0093 and VCR code 0048.
FCC NOTICE
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This equipment has been verified to comply with the limits for a class B computing device, pursuant to FCC Rules. In
order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with
non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is
15
Anthem
2220
Classé
1915
Denon
2134, 2706
Halcro
1934
Harman/Kardon
3045
Krell
2463
Marantz
2138, 2463
Parasound
1934
ADB
2254
Amino
1898
Cisco
1877
Motorola
1376
Pace
1877, 1376
Pioneer
1877
Samsung
1877
Scientific Atlanta
1877
Acoustic Research
2226
Altec Lansing
2251
Apple
1115
Definitive Technology
3645
Denon
2502
Dynavox
3231
Haier
3516
Harman/Kardon
3517
iLive
3175
Jamo
2228
JBL
3535
JVC
3049
LG
3217
Martin Logan
3526
Onkyo
3326
Panasonic
3409
Philips
2675
Polk Audio
2228, 3429
Proficient
3661
Roku
1828
Samsung
2660
Sharp
3097
Sony
2610
Final Brand Setup Code List – Potenza ST
###### Setup Codes For Audio - Amplifier (A) ######
###### Setup Codes For Cable Set Top Box (C) ######
###### Setup Codes For Audio - Accessory (M) ######
Version 1.0
(August 2013)
SpeakerCraft
3661
Toshiba
3627
VIZIO
2454
Yamaha
2021, 2116
ZVOX
2332, 2334
ABS
1272
Alienware
1272
Apple
2615
CyberPower
1272
D-Link
3671, 1554, 1731, 2186
Gateway
1272
Hewlett Packard
1272
Howard Computers
1272
Hush
1272
iBUYPOWER
1272
Iomega
2558
LG
3373
Linksys
1272
Logitech
3272
Magnavox
3339
Media Center PC
1272
Microsoft
2049, 1272
Mind
1272
Netgear
3324, 3292, 2033, 2036
NiveusMedia
1272
Northgate
1272
Popcorn Hour
2260
RCA
3335
Ricavision
1272
Roku
3061, 2371
Seagate
2698
Sony
2713, 1272
Stack 9
1272
Systemax
1272
Tagar Systems
1272
Toshiba
1272
Touch
1272
Viewsonic
1272
VIZIO
3670
Voodoo
1272
Western Digital
2558
Xbox
2049
ZT Group
1272
###### Setup Codes For Video - Accessory (N) ######
Version 1.0
(August 2013)
Aiwa
0158, 0189, 0121, 1089, 1641
Altec Lansing
2595
AMC
1077
Anam
1609
Apex Digital
1774
Arcam
1189, 0189
Audiotronic
1189
Bose
1933, 1629, 1229, 1841, 1253
Carver
1189, 0189, 0121, 1089
Coby
1263, 1389, 2698, 2748
Curtis
1389
Denon
2857, 1360, 2516, 2820, 2279, 3001, 3347, 3380, 2247, 1142
Dynex
2971
Fisher
1801
Garrard
0463
Gateway
1517
Glory Horse
1263
GPX
3214
Harman/Kardon
2241, 1304, 2443, 0110, 0189, 0891, 1306, 2670, 3418
Hitachi
1801
iLive
2013
Insignia
2169, 2175, 1030, 1077, 2472, 1751, 1893, 2126, 2474, 2929, 2966
Integra
1805, 1320, 2503, 2730, 0135
iSymphony
2442
JBL
2241, 0110, 1306
JVC
1676, 2239, 1374, 3115, 2331, 0074, 1263, 1495, 1871, 2040
Kenwood
1313, 1570, 1293, 0186
Klipsch
3092
LG
2197, 2676, 2284, 1293
Linn
0189
Magnavox
1189, 1269, 0189, 1089, 1831
Marantz
1189, 1269, 0189, 1089, 1289, 2114
McIntosh
1289
Micromega
1189
Musicmagic
1089
Myryad
1189
Nakamichi
1313
NexxTech
1751
Norcent
1389, 1751
Nova
1389
Onkyo
1805, 2730, 1320, 2503, 2451, 1531, 0135
Optimus
1023, 0186
Panasonic
2967, 1633, 2452, 1763, 1548, 1275, 1288, 3309, 3055, 2745, 1764,
2221, 1308, 1518, 1676, 2105, 1316
###### Setup Codes For Audio - Receiver (R) ######
Version 1.0
(August 2013)
Philips
2459, 2311, 0189, 1831, 1269, 1189, 0891, 1266, 1089
Pioneer
1935, 2612, 1123, 1023, 1384
Polk Audio
0189, 1289, 2244, 2270
Proscan
1254
RadioShack
1263
RCA
1609, 1023, 1254, 2041, 2426, 2611, 2655, 2719, 3281, 3297, 0054,
1123
Rio
1869
Samsung
1868, 2809, 1295, 2713, 3154, 1500, 2137, 1304
Sansui
0189, 1089
Sanyo
1469, 1801
Sharp
0186
Sharper Image
1263
Sherwood
1077, 1517, 1653, 1905, 2169
Sonic Blue
1869
Sony
1622, 1759, 0158, 2172, 1758, 1822, 2475, 1058, 2522, 3257, 3372,
1441, 1258, 1158, 1858, 1658, 2216, 1558, 2671, 3456
Stereophonics
1023
Sunfire
1313
Teac
0463
Technics
1633, 1308, 1518
Thorens
1189
Toshiba
1123, 1788
Victor
0074
Wards
0158, 0189, 0054
Yamaha
2061, 2467, 3030, 0176, 1276, 0376, 1331, 1815, 3313, 3580, 1375,
1376, 2455, 0186, 3267, 3270, 3626
Zenith
2197, 1293, 1869
Ballard Rural Telephone Cooperative
0775
Bell
0775
City of Cawker City Cable
0775
Country Vision Cable
0775
DirecTV
1377
Dish Network
0775
Dishpro
0775
Echostar
0775
Frontier Communications
0775
GOI
0775
HTS
0775
Hughes Network Systems
1377
Humax
1377
JVC
0775
Milestone Communications
0775
Qwest
1377
###### Setup Codes For Satellite Set Top Box (S) ######
Version 1.0
(August 2013)
Samsung
1377
Satellite Operations
0775
TDS Telecom
0775
Teleview Communications
0775
Telus
0775
Triangle Communication System
0775
United Satellite America
0775
United States Wireless
0775
USA Wireless Satellite TV
0775
Windstream
0775
World Satellite Cable Systems
0775
Acer
1339
Admiral
0093, 0463
Advent
1570
Affinity
3716, 3717
Aiko
0092
Aiwa
1362
Akai
0812, 0702, 1675, 0765, 1385
America Action
0180
Anam
0180
AOC
1589, 2087, 1365, 1590, 2014, 2479, 3707, 3720
Aomni
1623
Apex Digital
2397, 0748, 0879, 0765, 1217
Astar
1548, 1738
Asus
3340
Audiovox
1564, 0451, 0180, 0092, 1276, 1766, 1769, 1865, 1868,
2121, 2413, 3065
Auria
2087, 2277
Aventura
0171
Bell & Howell
0154
Berkshire
0047
Bradford
0180
Broksonic
0463, 1938
Candle
0056
Carver
0054
Celebrity
0000
Celera
0765
Champion
1362
Changhong
0765
Citizen
0060, 0092, 0056
Clarion
0180
Coby
3478, 3627, 2315, 2344, 2306, 2314, 2326, 2338, 2340,
2345, 2347, 2348, 2560, 3629, 1538
Commercial Solutions
1447, 0047
###### Setup Codes For Television (T) ######
Version 1.0
(August 2013)
Concerto
0056
Contec
0180
Craig
0180, 3423
Crosley
0054, 0000
Crown
0180
Curtis
2397, 3577, 2352, 2466, 2855, 3228, 1326
Curtis Mathes
0702, 0054, 0093, 0060, 0047, 0154, 0451, 0145, 1661,
0056, 1347, 1959
CXC
0180
Cytron
1326
Daewoo
1661, 0661, 0092, 0154, 0451
Dell
1264, 1080, 1863, 2491
Denon
0145
Digital Lifestyles
1765
Disney
1665, 1892
Dumont
0017
Durabrand
0178, 0171, 0463, 0180, 1665
Dynex
2049, 1463, 1785, 1810, 2184
Electric Mirror
3166
Electroband
0000
Electrograph
1755, 1623
Electrohome
0463, 1570, 1670
Element
1886, 1687, 2183, 2964, 3559
Elite
1457
Emerson
1864, 1394, 1886, 0171, 0178, 0154, 0451, 0463, 0180,
1661, 1665, 1913, 1944, 1963, 2183, 2776, 3559
Emprex
1765
Envision
1589, 2087, 1365, 2014
Epson
1122
ESA
0812, 0171, 1944, 1963
Fisher
0154, 1362
Fluid
2964
Fujitsu
0809
Funai
0000, 0171, 0180, 1271, 1904, 1963
Futuretech
0180
Gateway
1756, 1755
GE
1447, 0178, 0047, 0051, 0451, 0765, 1347, 1547
GFM
1864, 1886, 0171, 1665, 1963
Gibralter
0017
Go Video
1823, 1831
GoldStar
0178, 0056
GPX
3196
Grunpy
0180
Haier
1753, 1749, 2309, 1748, 3382, 1570, 2293
Hallmark
0178
Hannspree
1348, 1351, 2786
Version 1.0
(August 2013)
Harley Davidson
1904
Harman/Kardon
0054
Harvard
0180
Havermy
0093
Hello Kitty
0451, 2776
Hewlett Packard
1642
Hisense
3519, 2183, 0748, 1314, 1660, 2098
Hitachi
1643, 0145, 1145, 0056, 0679, 1576, 1904, 2756
iLo
1394, 1463, 1286, 1665, 1684, 1990
Infinity
0054
Initial
1990
Insignia
2049, 1641, 1326, 1564, 1423, 2002, 1785, 1892, 2184,
2417, 2751, 0171, 0463, 2088, 1963, 1660, 1517, 1385
Inteq
0017
iSymphony
3094, 3118, 3382
JBL
0054
JCB
0000
JCM
2256
Jensen
1326, 2541
JVC ,
1774, 1601, 2271, 2264, 0053, 0650, 0463, 0731, 1253,
1670, 1923, 2321
KDS
1498, 1687
KEC
0180
KLH
0765
Konka
1385, 1831
KTV
0180
Lasonic
3198
LG
1423, 2731, 2358, 2424, 0178, 3397, 1265, 2834, 3098,
2612, 0017
Lloyd's
1904
LodgingStar
3147
Luxman
0056
LXI
0156, 0054, 0178, 0047, 0154
MAG
1498, 1687
Magnasonic
1913
Magnavox
1867, 1454, 1455, 2597, 2372, 1866, 0054, 0171, 0706,
1365, 1904, 1913, 1944, 1963, 1990, 2902, 3708, 1755,
0051
Marantz
1454, 0054, 1398
Matsushita
0250, 0650
Maxent
1755, 1757
MB Quart
1868
Megatron
0178, 0145
Memorex
0463, 0178, 0154, 0150, 1570, 1665, 1670, 1785, 1892,
1924, 1927, 1938
MGA
0178, 0150
Version 1.0
(August 2013)
Midland
0047, 0017, 0051
Mintek
1990
Mitsubishi
1250, 0150, 1797, 0093, 0178
Motorola
0093
MTC
0060, 0056
Multitech
0180
NAD
0156, 1156, 0178, 0056
Naxa
2104, 3154, 3382
NEC
0056, 1398, 1704, 1797, 2293
NetTV
1755
Nexus Electronics
2183
Nikko
0178, 0092
Norcent
1589, 0748, 1365, 1590
Norwood Micro
1286
NTC
0092
NuVision
1657, 2158
Ölevia
1610, 1144, 1240
Onwa
0180
Optimus
0250, 0650, 0154, 1913, 1924, 1927
Optoma
1348
Optonica
0093
Orion
0463, 1463, 1938, 3540
Panasonic
1480, 1291, 0250, 0650, 2264, 1927, 1924, 1947, 0051,
1941, 1310, 1271, 1946
PARK
2104
Penney
0156, 0178, 0060, 0047, 0051, 1347
Philco
1394, 0054, 0171, 1271, 1665, 1963
Philips
1454, 1867, 2372, 1744, 1455, 2374, 2597, 1866, 0690,
0054, 2704, 1394, 0171, 1365, 1944, 1990, 2902
Pioneer
1457, 0679, 1260, 1398
Planar
1589
Polaroid
1523, 1498, 0765, 1276, 1286, 1314, 1326, 1385, 1538,
1687, 1766, 1767, 1769, 2002, 2121
Portland
0451, 0092, 1661
Prima
1753, 1749, 1785
Prism
0051
Proscan
1447, 0047, 1347, 2147, 2183, 2256, 3577
Proton
0178
Proview
1498, 1687
Pulsar
0017
Quasar
0250, 1291, 0650, 0051, 1924, 1927
RadioShack
0178, 0047, 0154, 0180, 0056, 1904
RCA
1447, 2746, 2434, 2932, 2247, 2187, 0047, 1781, 0093,
3577, 3147, 2855, 2002, 1959, 1547, 1385, 1347, 0679,
0051, 1661, 0090
Realistic
0178, 0154, 0180, 0056
Version 1.0
(August 2013)
RevolutionHD
1623
Runco
0017, 1398
Sampo
1755
Samsung
2051, 0812, 0702, 0060, 1060, 0766, 0814, 1959, 2596,
0650, 0178, 0056
Sansui
0171, 0463, 1463, 1670, 1892, 1904, 1938, 3540, 3564
Sanyo
1142, 0154, 1362, 0054, 0088
Sceptre
0878, 1217, 1360, 1599, 2337, 2506, 2528
Scotch
0178
Scott
0178, 0180
Sears
0156, 0054, 0178, 0047, 0171, 0154, 0056, 1904
Seiki
0178, 2964, 3559, 3560
Seleco
1351
Sens
1865
Sharp
2360, 0818, 0093
Sheng Chia
0093
Sherwood
1399, 3061
Sigmac
3423, 3477
Signature
0054
Solé
1623
Sony
0810, 0000, 1300, 0834, 1685, 1904
Soundesign
0178, 0180
Soyo
1831
Spectroniq
1498, 1687
Squareview
0171
SSS
0180
Starlite
0180
SunBriteTV
1610, 2337, 2528, 2935
Superscan
0864, 0093, 1944
Supersonic
1753, 2104, 3154, 3593
Supreme
0000
SVA
0748, 1963
Sylvania
1864, 1394, 1886, 0171, 1944, 1963, 1271, 0054, 1314,
1665, 1913, 3563
Symphonic
1394, 0171, 0180, 1904, 1913, 1944
Syntax
1610, 1144, 1240
Tandy
0093
Tatung
1756, 1286
TCL
2434, 3183
Technics
0250, 0051
Techwood
0051, 0056
Teknika
0054, 0060, 0180, 0150, 0092, 0056
Telefunken
0702, 0056
Thomas America
1904
TMK
0178, 0056
TNCi
0017
Version 1.0
(August 2013)
Toshiba
1524, 1656, 2724, 0156, 1156, 0822, 1256, 2006, 0060,
0154, 1265, 2684, 1959, 1945, 1704, 0650, 1369
TruTech
1665, 1723, 2066
TVS
0463
US Logic
1286
Venturer
1865, 1868
Victor
0053
Vidikron
0054, 1398
Vidtech
0178
Viewsonic
2087, 2014, 2049, 0864, 1755, 1564, 0885, 1330, 1365,
1542, 1578, 1627, 2277, 3706
Viore
1684, 2104, 2352, 3094, 3118, 3382
VisionQuest
3380
Vivitek
1369
VIZIO
1758, 3758, 2757, 3358, 2512, 1756, 0864, 0885
Wards
0156, 1156, 0054, 0000, 0178, 0060, 0047, 0154, 0017,
0051, 0180, 0056, 1347
Waycon
0156
Westinghouse
1712, 3579, 0885, 3382, 1300, 1577, 3094, 3470, 0889,
1282, 2293, 0451, 1217
White Westinghouse
0463, 1661
Wyse
1365
Zenith
1423, 0017, 2358, 2731, 0000, 0178, 0047, 0463, 1265,
1145, 0145, 0092, 1661, 1365, 1904, 2612
Accurian
0000
Admiral
0048
Adventura
0000
Aiwa
0037, 0000
Allegro
0039
American High
0035
Audiovox
0037
Calix
0037
Canon
0035
Carver
0081
Citizen
0037
Craig
0037
Crosley
0081, 0000
Curtis Mathes
0060, 0035, 0162
Daewoo
0045
Denon
0042
DirecTV
0739
Durabrand
0039
Dynatech
0000
Electrohome
0037, 0043
###### Setup Codes For Video - VCR (V) ######
Version 1.0
(August 2013)
Electrophonic
0037
Emerex
0032
Emerson
0037, 0000, 0043, 0593, 1593
Fuji
0035, 0033
Funai
0000, 0593, 1593
Garrard
0000
GE
0060, 0035, 0202
GFM
1593
GoldStar
0037, 1237
Gradiente
0000
Harley Davidson
0000
Harman/Kardon
0081
Headquarter
0046
Hitachi
0000, 0042, 0593
Hughes Network Systems
0042
Humax
0739
Instant Replay
0035
JVC
0067
KEC
0037
Kenwood
0067
Kodak
0035, 0037
Lloyd's
0000
LXI
0037
Magnasonic
0593
Magnavox
0035, 0039, 0081, 0000, 0593, 1593
Marantz
0035, 0081
Marta
0037
Matsushita
0035, 0162
MEI
0035
Memorex
0035, 0162, 0037, 0048, 0039, 0000,
0046, 1237
MGA
0043
Minolta
0042
Mitsubishi
0067, 0043
Motorola
0035, 0048
MTC
0000
Multitech
0000
NEC
0067
Nikko
0037
Olympus
0035
Optimus
1062, 0162, 0037, 0048, 0593
Panasonic
1062, 0035, 0162, 0616
Penney
0035, 0037, 0042, 1237
Pentax
0042
Philco
0035
Philips
0739, 0035, 0081
Version 1.0
(August 2013)
Pilot
0037
Pioneer
0067
Polk Audio
0081
Presidian
1593
Proscan
0060, 0202
Pulsar
0039
Quarter
0046
Quartz
0046
Quasar
0035, 0162
RadioShack
0000
Radix
0037
Randex
0037
RCA
0060, 0035, 0042, 0202
Realistic
0035, 0037, 0048, 0000, 0046
ReplayTV
0616
Runco
0039
Samsung
0045
Sanky
0048, 0039
Sansui
0000, 0067
Sanyo
0046
Scott
0045, 0043
Sears
0035, 0037, 0000, 0042, 0046, 1237
Sharp
0048, 0848
Signature
0035
Sonic Blue
0616
Sony
1232, 0032, 0035, 0033, 0000, 0636
STS
0042
Sylvania
0035, 0081, 0000, 0043, 0593, 1593
Symphonic
0000, 0593, 1593
Tashiko
0037
Teac
0000
Technics
0035, 0162
Teknika
0035, 0037, 0000
Thomas America
0000
TiVo
0739, 0636
Toshiba
0045, 0043
Totevision
0037
Vector
0045
Video Concepts
0045
Videomagic
0037
Villain
0000
Wards
0060, 0035, 0048, 0039, 0081, 0033,
0045, 0000, 0042, 0046
XR-1000
0035, 0000
Zenith
0037, 0039, 0033, 0000
Version 1.0
(August 2013)
Accurian
0675, 1416
Anthem
2820
Apex Digital
0672, 0717, 0755, 0794, 0797, 1004, 1020, 1056, 1061
Arrgo
1023
Audio Authority
2555
Audiovox
0717
B & K
0655
BBK
1224
Bel Canto Design
1571
Blaupunkt
0717
Blue Parade
0571
Broksonic
1419
California Audio
Labs
0490
Cambridge Audio
2808
Cinea
0831
CineVision
0833
Citizen
2116
Coby
2494, 0778, 0852, 1086, 1107, 1165, 1351
Craig
0831
Curtis
2235, 3401, 3403
CyberHome
0816, 1023, 1129, 1502
Daewoo
0705, 0833, 1234, 1242
Denon
2258, 1634, 2748, 0490
DigitalMax
1738
Digix
3850
Disney
0675, 1270, 3246
Dual
1068
Durabrand
1023, 1127
Dynex
2596
Electrohome
2116
Emerson
0675, 2213
Fisher
0670
Funai
0675
Gateway
1158
GE
0522, 0717
GFM
0675
Go Video
1075, 0741, 0744, 0833, 1044, 1158
GoldStar
0741
GPX
2235
Greenhill
0717
Grundig
0539, 0705
Harman/Kardon
0702, 1229, 2927, 0582, 3228
Hello Kitty
0831
Hitachi
0573, 0664
###### Setup Codes For Video - DVD (Y) ######
Version 1.0
(August 2013)
Hiteker
0672
Humax
1500, 1588
Initial
0717
Insignia
2095, 2596, 2428, 0675, 0741
Integra
2147, 0627, 0571, 1769, 1634
Irradio
0646
JBL
0702
JVC
1164, 0623, 2365, 1602, 0558, 0867, 1275, 2855, 3025
Kenwood
0534, 0490
KLH
0717, 1020, 1149
Lenoxx
1127
Lexicon
2545
LG
0741, 1602
LiteOn
1058, 1158, 1416, 1738
Loewe
0511
Magnavox
0675, 0539, 0646, 1354, 1506, 0503
Marantz
2414, 0539, 2481, 3444
McIntosh
1273, 1533
Memorex
2213, 0831, 1270, 2331, 3153
Messiah
Entertainment
2396
Microsoft
2083, 0522
Mintek
0717
Mitsubishi
1521
NAD
0741
Naxa
2235
Nesa
0717
Norcent
1003, 1107
Nyko
2340
Ölevia
2331
Onkyo
2147, 1627, 0627, 0503, 1769, 2215, 2562
Oppo
2545, 0575, 1224, 2185
Panasonic
1641, 0490, 3641, 1579, 1762, 0703, 0503
Philco
0675
Philips
2056, 0539, 2434, 0646, 2084, 1354, 0503, 0675, 1158, 1267,
1340, 1506
Pioneer
2442, 0142, 1571, 0571, 0525, 0631, 1512, 2854
Polaroid
1020, 1061, 1086
Polk Audio
0539
Presidian
0675, 1738
Pro Vision
0778
Proceed
0672
Proscan
0522
RCA
0522, 2213, 0571, 2919, 2587, 1500, 0717, 1769
RE-BL
2555
Rotel
0623
Version 1.0
(August 2013)
Samsung
0199, 0573, 2069, 1075, 1573, 1470, 2329, 2369, 2113, 1044,
2269, 2489, 2556, 3492, 0490
Sanyo
0670, 0873
Schneider
0646
Sensory Science
1158
Sharp
2250, 0630, 0675, 1419
Sherwood
1043, 3052, 3925
Shinsonic
0533
Sony
1516, 1633, 0533, 1033, 1533, 0864, 1070, 0772, 1536, 1540
Sylvania
Sylvania 0675
Symphonic
0675
Technics
0490, 0703
Theta Digital
0571
TiVo
1503
Toshiba
2705, 0503, 3157, 2277, 1510, 1608, 1154, 1588, 1503, 1769
Urban Concepts
0503
Viore
2553
VIZIO
2563, 1226
WB Electronics
2555
Xbox
0522, 2083
Yamaha
0497, 2298, 0539, 0490, 0646, 0545, 0817, 1354, 1416, 3995
Zenith
0503, 0741
Version 1.0
(August 2013)
Loading...