INNOVATIVE CONCEPTS GROUP C K73 User Manual

TABLET
USER GUIDE
Thank you for purchasing this device. Please read all the operating instructions before manipulating the device.
Avoid the device to being dropped. Avoid the display been shake seriously.
Do not use a metal object to touch the device to prevent it from short circuit.
Please backup your data to avoid data losses, specially when upgrading the
rmware.
Do not disassemble. Do not wipe the screen with alcohol, thinner or benzine.
Do not disconnect or shutdown the device while it is formatting or uploading/ downloading, or the procedures may lead to erros.
Avoid water or foreign objects enter the device.
Do not use the device in places that are extremly hot, cold, dusty or humid.
Specications are subject to change and improvement without notice.
Device at glance Instructions
1 - Power on/o
To turn on the device Press and hold the power switch for 5 seconds; the unit displays the start-up logo and starts loading.
To turn o the device
Press and hold the power switch for 2 seconds to
turn the unit o.
Sleep While the device is at working status, press the
1. Volume +
2. Volume -
3. Power On/O
4. Reset
5. Back
6. Speaker
7. Front camera
8. Earphone Jack
9. Micro USB interface
10. SD Card interface
11. Rear camera
power switch, it enters the sleeping mode, and
the screen will be o then. Press the power
switch again, it shift to the normal mode. You may use this function when you don’t’ use the device temporary to save power.
2 - Charging the device
When the device prompts low battery, please charge it with the carger provided.
3 - Main menu APP drawer
Make a swipe towards the top of the screen in the home interface, the main menu APP Drawer is appeared. It including the system setting, music playback, video playback, web browser and other applications you installed in the main menu APP Drawer.
4 - Settings
Click “Settings” in the main APP Drawer to enter the setting interface. Click the corresponding setting items to operate.
5 - Date and Time Setting
Click “System/Date & time” in the setting interface to set the date and time. You may set the date, time zone, time, time format in the menu.
6 - Brightness
Select “Display” in the setting interface. Click “Brightness level” to enter, and slide the bar to adjust the brightness.
7 - Screen Timeout
Adjust the delay before the screen automatically
turns o. Select “Display” in the setting interface.
Click “Sleep” to enter, and click the time you want.
8 - Wi connection
Click “Settings/Network & Internet” in the APP Drawer and click “Wi-Fi” to enter the Wi-Fi setting interface. Click to turn on the WIFI.
9 - Bluetooth
Click “Settings/Connected devices” in the APP Drawer and click “Bluetooth” to enter the Bluetooth setting interface. Turn on the bluetooth and pair a new device.
10 - Install/Uninstall and run applications
Install There are many ways to install applications under Android™, such as via USB, by third party program. We introduce installation by Apps Installer here.
Click the “Files ” in the APP Drawer. Select the
APK le you want and enter the application
installation interface. Click “Install” to install the application automatically. After installation, it prompts “Open” and “Done”. Click “Open” to
open the application. Click “Done” to exit.
Uninstall You may also use the corresponding third party software management tool or the installed application management software of the device to uninstall applications. Select “Setting/Apps &
notications” to select the installed applications
and check the attribute of it or uninstall it.
11 - Connect to the internet
After connecting with WIFI, open the browser Chrome and input the web address, you can browse the web then.
12 - Audio and video playback
Audio Playback Click the “Play Music” in the APP Drawer to enter the audio playback interface. It lists the audio
les in the device, and you may click the le name
to play it. In the audio playing interface, click the icons to play/pause/ increase volume/ decrease volume/ FF/ REW.
Video Playback Click the “Video” in the APP Drawer to enter the
video playback interface. It lists the video les in the device, and you may click the le name to play
it. In the video playing interface, touch the screen to pop-up the operation icons and click the icons to play/pause/ increase volume/ decrease
volume/ skip to next le/skip to previous le.
13 - Picture viewing
Click “Photos” in the main menu to enter the picture folder list. Select and click the folder you want to enter, it displays the pictures. Click the thumbnail of the picture to view it. Touch the screen to pop-up the operation icons while viewing the picture.
14 - Camera Device specications
Click “Camera” in the main interface. The camera has 2 modes. Camera and Video mode.
Camera Mode Click on the camera to take a picture. Click on the camera settings cog wheel to set the resolution and quality, capture sound and set the save location.
Video Mode Click on the video icon to start recording a video.
15 - Connect with a external device
Connect the device with the PC via the USB cable. The PC appears two new disk symbols after connected successfully. One is the TF card, and
the other is the built-in ash.
To enable data transfer, got to settings/ connected devices/ USB.
16 - Troubleshooting
What if the device is abnormal during operation?
1) Reboot the device to see if it works OK.
2) Charge the device by the charger to activate the battery. Make sure it has power before you operate it.
3) It is suggested to upgrade the OS of the device by professional.
Why the standby time is so short sometimes?
The use time of the battery is all depend on the temperature and use instance. If the temperature is too high or too low, the use time
of the battery might be eected. It is suggest
using the device in normal temperature. The
using time is also aected by increased volume
and frequently operation.
DISPLAY: 7”, LCD IPS 1024*600 IPS Panel CPU: Rockchip 3126C quad core RAM/ROM DDR3 1GB+16 GB EXTENDED MEMORY microSD
supports up 32gb
BATTERY 2500mah Li-ion Battery WIFI CAMERA 2*2 MPX (FRONT AND BACK) ALTAVOZ: INTERNAL MATERIAL: PLASTIC OS: Android™ 8.1 (Go edition)
Android™ is a trademark property of Google LLC.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Loading...