Page 1
Installation instructions for the GENII Converter USB for Windows XP
1. DO NOT connect the GENII Converter USB before install the software from the ‘Driver and
Tools Disk’.
2. Insert ‘Driver and Tools Disk’ in CD-ROM.
3. If CD-ROM does not AutoStart, navigate to the CD-ROM directory and run Setup.exe.
4. Once ‘Driver and Tools Disk’ is finished installing, remove CD-ROM for drive and connect
GENII Converter USB using USB cable provided.
5. The device should be automatically detected. A dialog box will appear to proceed with driver
installation.
6. Choose ‘Install from a list or specific location.’ and choose ‘Next.’
7. Choose ‘Include this location in the search’ and enter or browse to the following location:
C:\Program Files\Innotech\Drivers\Gen2ConverterUSB
8. Choose ‘Next.’
U:\neil\Docs\USB Converter\Installation instructions for the GENII Converter USB - new lett erhead.doc
Page 2
9. As the drivers are unsigned, you may be asked if you really want to install them. Choose ‘Continue Anyway’ if
this dialog appears.
10. Choose ‘Finish.’
If you have any problems with installing the GENII Converter USB, please call Innotech support on 07 3841 1388.
U:\neil\Docs\USB Converter\Installation instructions for the GENII Converter USB - new lett erhead.doc
Page 3
Installation instructions for the GENII Converter USB for Windows 98 and
Windows 2000
1. DO NOT connect the GENII Converter USB before install the software from the ‘Driver and
Tools Disk’.
2. Insert ‘Driver and Tools Disk’ in CD-ROM.
3. If CD-ROM does not AutoStart, navigate to the CD-ROM directory and run Setup.exe.
4. Once ‘Driver and Tools Disk’ is finished installing, remove CD-ROM for drive and connect
GENII Converter USB using USB cable provided.
5. The device should be automatically detected. A dialog box will appear to proceed with driver
installation.
6. Choose ‘Next.’
7. Ensure that ‘Search for the best driver for your device.’ is selected and choose ‘Next.’
8. Choose ‘Specify location’ and enter or browse to the following location:
C:\Program Files\Innotech\Drivers\Gen2ConverterUSB
9. Choose ‘Next.’
U:\neil\Docs\USB Converter\Installation instructions for the GENII Converter USB - new lett erhead.doc
Page 4
10. Choose ‘Next.’
11. Choose ‘Finish.’
If you have any problems with installing the GENII Converter USB, please call Innotech support on 07 3841 1388.
U:\neil\Docs\USB Converter\Installation instructions for the GENII Converter USB - new lett erhead.doc
Loading...