T2T-32T BTC
USER MANUAL
INNOSILICON CONFIDENTIAL
INNOSILICON T2T-32T BTC
INNOSILICON CONFIDENTIAL
Table of Contents
1. OVERVIEW
2. ASSEMBLE THE MINER 2
2.1 Check the miner before power on 2
2.2 Connect the PSU 3
3. OPERATE THE MINER
3.1 Enter the miner console 4
3.2 Set up the pool 4
3.3 Check the hashrate of the miner 5
3.4 Network configuration 5
3.5 Other pages 6
3.5.1 Overview 6
1
4
3.5.2 Upgrade 6
3.5.3 Modify the password 7
3.5.4 Reboot 7
3.5.5 Factory reset 7
INNOSILICON CONFIDENTIAL
1. OVERVIEW
INNOSILICON CONFIDENTIAL
T2T-32T BTC
Part Number T2T-32T
Hashrate 32T(±5%)
Power 2200w(±10%)
Algorithm Sha256
Size (L×W×H) 460mm(L)*160mm(W)*236mm(H)
Net Weight 13.9KG
Operating Temperature 0-40
Network Connection Ethernet
INNOSILICON CONFIDENTIAL
1
2. ASSEMBLE THE MINER
INNOSILICON CONFIDENTIAL
T2T-32T BTC
2.1 CHECK THE MINER BEFORE POWER ON
Check the warranty sticker is well or not, especially the hashboards PSU port side. If the warranty sticker
·
is damaged when you received the miner, please contact our After-sales.
Before you power on the miner, shake the miner softly, if you can hear the sound of metal banging on
·
metal, please contact our After-sales.
Check if the fan work well, if you find the fans broken please contact our After-sales.
·
The cable connection should be same as it arrived.
·
INNOSILICON CONFIDENTIAL
2
T2T-32T BTC
INNOSILICON CONFIDENTIAL
2.2 CONNECT THE PSU
Connect the miner and the router by the Ethernet cable, then the miner can start to run after power on
the miner.
1. IP SET button:
Press it 1—4 seconds, it will (1) show the IP of the miner in the “Set IP” tool; (2) change the miner to Static
IP mode and modify the IP to the IP range you set in the “Set IP” tool
Press it 4—15 seconds, the miner will become to DHCP and the settings of the miner should be restore to
default.
Press it more than 20 seconds to switch the Dynamic (Static) IP to Static (Dynamic)
2. RESET button: Your miner will restart if you press it..
3. Fault led: light means the network connection is bad
4. Normal led: Solid means Static IP mode;Blinking means DHCP mode(DHCP)
INNOSILICON CONFIDENTIAL
3
T2T-32T BTC
INNOSILICON CONFIDENTIAL
3. OPERATE THE MINER
3.1 ENTER THE MINER CONSOLE
DHCP is the default IP mode of the miner, find the IP via the router or the IP scanner. Enter the IP of the
miner on the browser and press the Enter button. Chrome is the suggested browser. (Please try with
dragonadmin If the password admin is invalid)
3.2 SET UP THE POOL
Please use the suggested pool as below:
1 ckpool: stratum+tcp://cn.ckpool.org:443
or stratum+tcp://pool.ckpool.org:3333
2 slushpool: stratum+tcp://stratum.slushpool.com:3333
3 f2pool: stratum+tcp://btc-65536.f2pool.com:3333
4 btc.top: stratum+tcp://t2.btc.top:8888
or stratum+tcp://bak.t2.btc.top:3333
5 poolin: stratum+tcp://btc-bj.ss.poolin.com:1800
or stratum+tcp://btc-sz.ss.poolin.com:1800
INNOSILICON CONFIDENTIAL
4
T2T-32T BTC
INNOSILICON CONFIDENTIAL
3.3 CHECK THE HASHRATE OF THE MINER
After set up the pool, the miner will mine for you.
3.4 NETWORK CONFIGURATION
INNOSILICON CONFIDENTIAL
5
T2T-32T BTC
INNOSILICON CONFIDENTIAL
3.5 OTHER PAGES
3.5.1 CHANGE THE OPERATE MODE
There are 4 modes can be choosed, please click the “Save” after you set the mode.
3.5.2 OVERVIEW
INNOSILICON CONFIDENTIAL
6
3.5.3 UPGRADE
INNOSILICON CONFIDENTIAL
T2T-32T BTC
3.5.4 MODIFY THE PASSWORD
INNOSILICON CONFIDENTIAL
7
3.5.4 REBOOT
INNOSILICON CONFIDENTIAL
T2T-32T BTC
3.5.5 FACTORY RESET
INNOSILICON CONFIDENTIAL
7
Loading...