Global LCD Panel Exchange Center
INNOLUX DISPLAY CORPORATION
TM315GW11 V.0 LCD MODULE SPECIFICATION
) Preliminary Specification
(
() Final Specification
www.panelook.com
Customer Checked and Approved by
SEC
Innolux Display Corporation,
No.160 Kesyue Rd., Chu-Nan Site, Hsinchu Science Park,
Chu-Nan 350, Miao-Li County, Taiwan
Tel: 886-37-586000 Fax: 886-37-586060
Document Number: TM315GW11 V.0 DR4-26
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
SPEC NO.
PAGE
Version: 1.0
Record of Revision
Version Revise Date Page Content
1 2010.2.05
All All
TM315GW11 V.0
2/23
InnoLux copyright
All rights reserved,
Copying forbidden.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
2
Global LCD Panel Exchange Center
www.panelook.com
SPEC NO.
PAGE
TM315GW11 V.0
3/23
Contents:
A. General Specification 4
B. Electrical Specifications 5
1. Pin assignment
2. Absolute maximum ratings
3. Electrical characteristics
a. TFT LCD Module conditions
b. Display color vs. input data signals
5
8
8
8
11
c. Input signal timing
d. Display position
e. Backlight driving conditions
12
14
15
C. Optical specifications 16
D. Reliability test items 20
E. Safety 21
F. Display quality 21
G. Handling precaution 21
H. Label 22
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
3
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
A. General specification
NO. Item Specification Remark
1 Display resolution (pixel)
2 Active area (mm)
3 Screen size (inch)
4 Pixel pitch (mm)
5 Color configuration
6 Overall dimension (mm)
7 Weight (g)
8 Surface treatment
SPEC NO.
1,366(H) X 768(V), WXGA+ resolution
697.685 (H) X 392.256(V)
31.5 inches diagonal
0.17025 (H) X 0.51075 (V)
R, G, B vertical stripe
783.55 (W) X 462.55 (H) X 61.6(D)
5300
Anti-glare, Haze=11%, Hard coating (3H)
PAGE
TM315GW11 V.0
4/23
Note 1
9 Input color signal
10 Display colors
11 Color saturation
12 Backlight
RoHS & Halogen free
13
Note 1: Glare Option available
8 bit LVDS
16.7M
72% NTSC
4U CCFL
RoHS & Halogen free compliance
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
4
Global LCD Panel Exchange Center
www.panelook.com
B. Electrical specifications
1. Pin assignment
SPEC NO.
PAGE
TM315GW11 V.0
5/23
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
5
Global LCD Panel Exchange Center
www.panelook.com
2. LVDS INTERFACE
SPEC NO.
PAGE
TM315GW11 V.0
6/23
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
6
Global LCD Panel Exchange Center
www.panelook.com
3. Absolute maximum ratings
SPEC NO.
PAGE
TM315GW11 V.0
7/23
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
7
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
SPEC NO.
PAGE
TM315GW11 V.0
8/23
4. Electrical characteristics
a. TFT LCD MODULE
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
8
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
SPEC NO.
PAGE
TM315GW11 V.0
9/23
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
9
Global LCD Panel Exchange Center
www.panelook.com
SPEC NO.
PAGE
TM315GW11 V.0
10/23
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
10
Global LCD Panel Exchange Center
www.panelook.com
SPEC NO.
PAGE
TM315GW11 V.0
11/23
b. Display color vs. input data signals
The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input
for the color; the higher the binary input, the brighter the color. The table below provides a reference for
color versus data input.
Color
MSB LSB MSB LSB MSB LSB
R7 R6 R5 R4 R3 R2 R1 R0
Red Green Blue
Input color data
G7 G6 G5 G4 G3 G2 G1 G0
B7 B6 B5 B4 B3 B2 B1 B0
Basic
colors
Black
Red(255)
Green(255)
Blue(255)
Cyan
Magenta
Yellow
White
0
0
0
1
1
1
0
0
0
0
0
0
0
0
1
1
1
0
1
1
1
1
1
1
0
0
0
1
1
0
0
0
0
0
0
1
1
1
1
1
1
0
1
1
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
1
1
0
0
0
1
0
0
1
1
1
1
1
0
0
0
0
1
1
0
0
1
1
0
0
1
1
1
1
0
0
0
0
0
0
1
1
1
0
0
0
1
1
1
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
1
1
1
0
0
1
1
1
1
0
0
0
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
1
1
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
0
0
0
1
1
1
0
0
0
0
0
0
1
1
1
1
1
1
0
0
1
1
Red
Green
Red(000) dark
Red(001)
Red(002)
:
Red(253)
Red(254)
Red(255) bright
Green(000)dark
Green(001)
Green(002)
:
Green(253)
Green(254)
Green(255)
bright
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
1
1
1
1
1
1
0
0
0
0
0
0
:
:
0
0
0
0
0
0
:
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
1
0
0
0
0
0
0
:
:
:
:
:
:
:
:
0
1
0
0
0
0
0
1
0
0
0
0
0
0
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
1
1
0
1
1
0
1
1
0
0
:
:
:
1
1
1
1
1
1
1
1
1
0
0
0
0
:
0
0
0
0
0
0
:
1
1
1
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
1
0
0
1
:
:
1
0
1
0
1
1
0
0
0
0
0
0
0
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
0
0
0
0
0
0
0
0
0
0
0
0
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
0
0
0
0
0
0
0
0
0
Blue(000) dark
Blue(001)
Blue(002)
Blue
Blue(253)
Blue(254)
Blue(255) bright
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
:
1
1
1
1
1
1
0
0
0
0
1
0
1
0
:
:
:
:
1
0
1
1
1
0
1
1
1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
11
Global LCD Panel Exchange Center
www.panelook.com
c. Input signal timing
Support Input Timing Table
SPEC NO.
PAGE
TM315GW11 V.0
12/23
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
12
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
SPEC NO.
PAGE
TM315GW11 V.0
13/23
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
13
Global LCD Panel Exchange Center
www.panelook.com
SPEC NO.
PAGE
TM315GW11 V.0
14/23
d. Display Position
D(1, 1) D(2, 1) …… D(683, 1) …… D(1365, 1) D(1366, 1)
D(1, 2) D(2, 2) …… D(683, 2) …… D(1365, 2) D(1366, 2)
.
.
.
D(1, 384) D(2, 384) …… D(683, 384) …… D(1365, 384) D(1366, 384)
.
.
.
D(1, 767) D(2, 767) …… D(683, 767) …… D(1365, 767) D(1366, 767)
D(1, 768) D(2, 768) …… D(683, 768) …… D(1365, 768) D(1366, 768)
……
……
.
.
.
.
.
.
……
……
.
.
.
.
.
.
.
.
.
.
.
.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
14
Global LCD Panel Exchange Center
www.panelook.com
e. Backlight driving conditions
Electrical specification
SPEC NO.
PAGE
TM315GW11 V.0
15/23
Note 3: (1) Uniformity and flicker does not guarantee when the dimming control under 20%.
(2) 10% dimming function is okay, no shutdown occur.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
15
www.panelook.com
Global LCD Panel Exchange Center
yp
www.panelook.com
C. Optical specifications
Item Symbol Condition
G to G Response time
Contrast ratio
Viewing angle
CR
Top
Bottom
Left
T
= 0ш
= 0ш
CRЊ10
CRЊ10
CRЊ10
SPEC NO.
PAGE
Specification
Min. T
- 8.5 -
2300 3000 -
75 88 -
75 88 -
70 88 -
.Max.
TM315GW11 V.0
16/23
Unit Remark
ms Note 2
Note 1,3
deg. Note 1,3,5
Right
Brightness (Center)
YL
Wx
Color chromaticity(CIE)
Wy
Rx
Ry
Gx
Gy
Bx
By
White uniformity (9)
Cross talk Ct
W
CRЊ10
= 0ш
70 88 -
300 350 -ʳ
0.280
0.290
0.643
0.331
-0.03
0.75 0.80 -ʳ
-ʳ -ʳ 2%
0.276
0.597
0.144
0.069
+0.03
ni
ts Note 1,4
Note 1,6
Note 7
Note : 1 Ambient temperature = 25°C.
2.To be measured in dark room after backlight warm up 30 minutes.
Note 1: To be measured with a viewing cone of 2°by Topcon luminance meter BM-5A.
Note 1
Note 2: Note 2: G to G Response Time:
Response time T is the average time required for display transition by switching the input
signal for six luminance ratio (0%,20%,40%,60%,80%,100% brightness matrix) and is based
on
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Note 3: Definition of contrast ratio:
Contrast ratio is calculated by the following formula.
Contrast ratio (CR)=
Note 4: Driving conditions for CCFL: I
Note 5: Definition of viewing angle.
Brightness on the "white" state
Brightness on the "black" state
= 9.0 mA,
L
SPEC NO.
PAGE
TM315GW11 V.0
17/23
Note 6: Definition white uniformity:
Luminance are measured at the following nine points (P1~P9).
Ӭ
Minimum Brightness of nine points (P1~P9).
=
Maximum Brightness of nine points (P1~P9).
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
SPEC NO.
PAGE
TM315GW11 V.0
18/23
Note 7:
1/2
1/6
2/3 1/3
A
1/6
A’
127 gray level 127 gray level
B
1/2
l L
l L
l / LA x 100%= 2% max., LA and LA’ are brightness at location A and A’
A-LA’
l / LB x 100%= 2% max., LB and LB’ are brightness at location B and B’
B-LB’
Note 10: Optical characteristic measurement setup.
1/2
1/6
1/6
1/3
1/2
B’
2/3
255 gray level
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
SPEC NO.
PAGE
TM315GW11 V.0
19/23
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
D. Reliability test items
Test Item Test Condition Judgment Remark
High temperature storage
Low temperature storage
High temperature operation
Low temperature operation
Vibration
(non-operation)
60°C, 240Hrs
-20°C, 240Hrs
50°C, 240Hrs
0°C, 240Hrs
Vibration level : 1.5G
Bandwidth : 10-300Hz
Waveform : sine wave,
sweep rate : 10min
30 min for each direction X, Y, Z
(1.5 Hrs in total)
SPEC NO.
PAGE
Note 1 Note 2
Note 1 Note 2
Note 1 Note 2
Note 1 Note 2
Note 1 Note 2
T315HA01-EB
20/23
Mechanical Shock
(non-operation)
Vibration test
(with carton)
Drop test
(with carton)
MTBF Demonstration 50,000 hours with confidence level 90% Note 1 Note 3
Note1: Pass: Normal display image with no obvious non-uniformity and no line defect.
Partial transformation of the module parts should be ignored.
Fail: No display image, obvious non-uniformity, or line defects.
Note2: Evaluation should be tested after storage at room temperature for two hours.
Note 3: The MTBF calculation is based on the assumption that the failure rate distribution meets the
Exponential Model (CCFL excluded)
Shock level : 50G, 11ms
Waveform : Half sine wave
Direction : ±X, ±Y, ±Z
One time each direction
Random Wave (1.5 Grms 10~200Hz)
30mins / Per each X.Y.Z axes
Height : 38cm
1corner; 3edges; 6 surfaces
Note 1 Note 2
Note 1 Note 2
Note 1 Note 2
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
SPEC NO.
PAGE
T315HA01-EB
21/23
E. Safety
(1) Sharp Edge Requirements
There will be no sharp edges or corners on the display assembly that could cause injury.
(2) Materials
a. Toxicity
There will be no carcinogenic materials used anywhere in the display module. If toxic materials
are used, they will be reviewed and approved by the responsible InnoLux Toxicologist.
b. Flammability
All components including electrical components that do not meet the flammability grade UL94-V1
in the module will complete the flammability rating exception approval process. The printed circuit
board will be made from material rated 94-V1 or better. The actual UL flammability rating will be
printed on the printed circuit board.
c. Capacitors
If any polarized capacitors are used in the display assembly, provisions will be made to keep them
from being inserted backwards.
F. Display quality
The display quality of the color TFT-LCD module should be in compliance with the
Innolux’s Incoming inspection standard.
G. Handling precaution
The Handling of the TFT-LCD should be in compliance with the Innolux’s handling principle
standard.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
H. Label
(1). Module Label
40 mm
MADE IN XXX
E253847
1006
Z1'Z2'-Z3'Z4'Z 5'Z 6'Z7'Z8'Z9'Z10'Z11'Z12'Z13'Z14'Z15'Z16'Z17'Z18'Z19'Z20'Z21'Z22'Z
SPEC NO.
PAGE
T315HA01-EB
22/23
80 mm
T315HA01-EB
G1
Z1 Z2 Z3 Z4 Z
5 Z 6Z 7Z8 Z9 Z10 Z 11 Z 12 Z 13
EE01
'
23
(a) Model Number: T315HA01-EB
(b) Week Code: 1006 (YY,WK)
(c) Revision Code: EE01 (Maker information + Minor Revision)
(d) Serial ID I: Z
Z2 Z3 Z4 Z 5 Z 6 Z 7 Z8 Z
1
9 Z10 Z 11 Z 12 Z 13
(e) Serial ID II :PPID (23 digits)
Serial No: Lot No,Panel No
Plant No.
Year, Month, Date
Maker information: EBEE
Customer Code: V
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
(2) Carton Label
INNOLUX DISPLAY
BOX ID :
60 mm
Model No. T315HA01-EB
AT3150004 0XX
Quantity : 11 PCS
MFG Date: 20XX/XX/XX
QC: Made in XXX
Z1 Z2 Z3 Z4 --Z 5--Z6 Z7 Z8 Z 9
SPEC NO.
PAGE
T315HA01-EB
23/23
100 mm
(a) Model Number: T315HA01-EB
(b) Packing quantity: 11 pcs
(c) Serial ID: Z
Z2 Z3 Z4 Z 5 Z6 Z
1
7 Z8
Z 9
Serial ID includes the information as below:
(a) Manufactured Date: Year: 0~9, for 2000~2009
Month: 1~9 & A~C for Jan.~Dec.
Date: 1~9 & A~Z (exclude I, O, Q, U) for 1st~31th
(b) Code of grade: 1, 3, 5, E
Serial No
Code of grade
Year, Month, Date
INL internal use
(c) Serial No: Module packing sequence no.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...