PRODUCT SPECIFICATION
Customer:
Common
Doc. Number :
Tentative Specification
Preliminary Specification
Approval Specification
MODEL NO.: M185BGE
SUFFIX: L22
APPROVED BY SIGNATURE
Name / Title
Note
Please return 1 copy for your confirmation with your
signature and comments.
Approved By Checked By Prepared By
Version 3.0 19.Apr.2011 1 / 26
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
PRODUCT SPECIFICATION
CONTENTS
1. GENERAL DESCRIPTION ...................................................................................................... 5
1.1 OVERVIEW........................................................................................................................5
1.2 GENERAL SPECIFICATIONS ...........................................................................................5
2. MECHANICAL SPECIFICATIONS...........................................................................................5
3. ABSOLUTE MAXIMUM RATINGS ..........................................................................................6
3.1 ABSOLUTE RATINGS OF ENVIRONMENT......................................................................6
3.2 ELECTRICAL ABSOLUTE RATINGS ................................................................................6
3.2.1 TFT LCD MODULE .................................................................................................... 6
3.2.2 BACKLIGHT UNIT...................................................................................................... 7
4. ELECTRICAL SPECIFICATIONS ............................................................................................ 7
4.1 FUNCTION BLOCK DIAGRAM..........................................................................................7
4.2. INTERFACE CONNECTIONS ..........................................................................................8
4.3 ELECTRICAL CHARACTERISTICS................................................................................10
4.3.1 LCD ELETRONICS SPECIFICATION ...................................................................... 10
4.3.2 Vcc Power Dip Condition.......................................................................................... 12
4.3.3 BACKLIGHT UNIT.................................................................................................... 12
4.4.3 LIGHTBAR Connector Pin Assignment .................................................................... 13
4.4 LVDS INPUT SIGNAL SPECIFICATIONS........................................................................14
4.4.1 LVDS DATA MAPPING TABLE ................................................................................. 14
4.4.2 COLOR DATA INPUT ASSIGNMENT....................................................................... 14
4.5 DISPLAY TIMING SPECIFICATIONS ..............................................................................15
4.6 POWER ON/OFF SEQUENCE........................................................................................17
5. OPTICAL CHARACTERISTICS ............................................................................................ 18
5.1 TEST CONDITIONS ........................................................................................................18
5.2 OPTICAL SPECIFICATIONS ...........................................................................................18
6. RELIABILITY TEST ITEM...................................................................................................... 21
7. PACKING ...............................................................................................................................22
7.1 PACKING SPECIFICATIONS ..........................................................................................22
7.2 PACKING METHOD.........................................................................................................22
7.3 PALLET............................................................................................................................23
8. CMI MODULE LABEL ...........................................................................................................24
9. PRECAUTIONS .....................................................................................................................25
9.1 ASSEMBLY AND HANDLING PRECAUTIONS................................................................25
9.2 STORAGE PRECAUTIONS.............................................................................................25
9.3 OPERATION PRECAUTIONS .........................................................................................25
Version 3.0 19.Apr.2011 2 / 26
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
PRODUCT SPECIFICATION
9.4 SAFETY PRECAUTIONS ................................................................................................26
9.5 SAFETY STANDARDS ....................................................................................................26
9.6 OTHER ............................................................................................................................26
Appendix. OUTLINE DRAWING ...............................................................................................26
Version 3.0 19.Apr.2011 3 / 26
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
PRODUCT SPECIFICATION
REVISION HISTORY
Version Date Page Description
3.0 Apr.19, 2011 All Spec Ver.3.0 was first issued.
Version 3.0 19.Apr.2011 4 / 26
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
PRODUCT SPECIFICATION
1. GENERAL DESCRIPTION
1.1 OVERVIEW
M185BGE-L22 is a 18.5” TFT Liquid Crystal Display module with WLED Backlight unit and 30 pins
1ch-LVDS interface. This module supports 1366 x 768 HD mode and can display up to 16.7M colors. The
converter module for Backlight is not built in.
1.2 GENERAL SPECIFICATIONS
Item Specification Unit Note
Screen Size 18.51” real diagonal - -
Driver Element a-si TFT active matrix - -
Pixel Number 1366 x R.G.B. x 768 pixel -
Pixel Pitch 0.3 (H) x 0.3 (V) mm -
Pixel Arrangement RGB vertical stripe - -
Display Colors 16.7M color -
Transmissive Mode Normally white - -
Surface Treatment AG type, 3H hard coating, Haze 25% - -
Luminance, White 250 (Typ.) Cd/m2 -
Color Gamut 72% of NTSC(Typ.) - -
TCO TCO 5.0 compliance - -
Power Consumption Total 10.916W (Max.) @ cell 3.3 W (Max.), BL 7.616W (Max.)
(1)
Note (1) The specified power consumption : Total= cell (reference 4.3.1)+BL (reference 4.3.3)
2. MECHANICAL SPECIFICATIONS
Item Min. Typ. Max. Unit Note
Horizontal (H) 429.87 430.37 430.87 mm
Module Size
Bezel Area
Active Area
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
Vertical (V) 254.1 254.6 255.1 mm
Thickness (T) - 10.5 11 mm
Horizontal 413.2 413.4 413.6 mm -
Vertical 239.8 234 234.2 mm -
Horizontal - 409.8 - mm -
Vertical - 230.4 - mm -
Weight - 1600 1800 g -
(1)
Version 3.0 19.Apr.2011 5 / 26
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
3. ABSOLUTE MAXIMUM RATINGS
3.1 ABSOLUTE RATINGS OF ENVIRONMENT
PRODUCT SPECIFICATION
Item Symbol
Min. Max.
Storage Temperature TST -20 60 ºC (1)
Operating Ambient Temperature TOP 0 50 ºC (1), (2)
Note (1)
(a) 90 %RH Max. (Ta <= 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The temperature of panel surface should be 0 ºC min. and 60 ºC max.
Value
Unit Note
3.2 ELECTRICAL ABSOLUTE RATINGS
3.2.1 TFT LCD MODULE
Item Symbol
Power Supply Voltage VCCS -0.3 6.0 V
Logic Input Voltage VIN -0.3 3.6 V
Version 3.0 19.Apr.2011 6 / 26
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
Value
Min. Max.
Unit Note
(1)
PRODUCT SPECIFICATION
LED Forward Current Per
e Voltage Per
3.2.2 BACKLIGHT UNIT
Item Symbol
Input Pin
LED Revers
Input Pin
LED Pulse Forward
Current Per Input Pin
0 65 70 mA
I
F
V
- - 40 V
R
I
- - 150 mA
P
Min. Typ Max.
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation
should be restricted to the conditions described under Normal Operating Conditions.
Note (2) Specified values are for input pin of LED light bar at Ta=25±2 (Refer to 4.3.3 and 4.3.4 for
further information).
Value
Unit Note
(1), (2)
Duty=100%
(1), (2)
Pulse Width10msec.
and Duty10%
4. ELECTRICAL SPECIFICATIONS
4.1 FUNCTION BLOCK DIAGRAM
RX0(+/-)
RX1(+/-)
RX2(+/-)
RX3(+/-)
RXC(+/-)
NC
GND
Vcc
Version 3.0 19.Apr.2011 7 / 26
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
PRODUCT SPECIFICATION
4.2. INTERFACE CONNECTIONS
PIN ASSIGNMENT
Pin Name Description
1 NC Not connection, this pin should be open
2 NC Not connection, this pin should be open
3 NC Not connection, this pin should be open
4 GND Ground
5 RX0- Negative LVDS differential data input. Channel 0 (odd)
6 RX0+ Positive LVDS differential data input. Channel 0 (odd)
7 GND Ground
8 RX1- Negative LVDS differential data input. Channel 1 (odd)
9 RX1+ Positive LVDS differential data input. Channel 1 (odd)
10 GND Ground
11 RX2- Negative LVDS differential data input. Channel 2 (odd)
12 RX2+ Positive LVDS differential data input. Channel 2 (odd)
13 GND Ground
14 RXCLK- Negative LVDS differential clock input. (odd)
15 RXCLK+ Positive LVDS differential clock input. (odd)
16 GND Ground
17 RX3- Negative LVDS differential data input. Channel 3 (odd)
18 RX3+ Positive LVDS differential data input. Channel 3 (odd)
19 GND Ground
20 NC For LCD internal use only, Do not connect
21 NC For LCD internal use only, Do not connect
22 NC For LCD internal use only, Do not connect
23 GND Ground
24 GND Ground
25 GND Ground
26 Vcc +5.0V power supply
27 Vcc +5.0V power supply
28 Vcc +5.0V power supply
29 Vcc +5.0V power supply
30 Vcc +5.0V power supply
Note (1) Connector Part No.:
GS23302-0011R-7F (FOXCONN) or equivalent
Note (2) The first pixel is odd.
Note (3) Input signal of even and odd clock should be the same timing.
Version 3.0 19.Apr.2011 8 / 26
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
PRODUCT SPECIFICATION
Pitch
1,1
(odd)
2,1
3,1
1,2
(even)
2,2
1,3
(odd)
1,4
(even)
1,Xmax
Pitch
Ymax,1
Ymax,
Xmax
Version 3.0 19.Apr.2011 9 / 26
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
4.3 ELECTRICAL CHARACTERISTICS
4.3.1 LCD ELETRONICS SPECIFICATION
Parameter Symbol
Power Supply Voltage Vcc 4.5 5 5.5 V -
Ripple Voltage VRP - - 300 mV -
Rush Current I
White - 0.3 0.4 A (3)a
Power Supply Current
Power Consumption PLCD
LVDS differential input voltage Vid 100 - 600 mV -
LVDS common input voltage Vic 1.0 1.2 1.4 V -
Logic High Input Voltage VIH - - 0.1 V -
Logic Low Input Voltage VIL 0.1 - - V -
Note (1) The ambient temperature is Ta = 25 ± 2 ºC.
Note (2) Measurement Conditions:
Black - 0.5 0.6 A (3)b
Vertical Stripe
PRODUCT SPECIFICATION
RUSH
Value
Min. Typ. Max.
- 1.5 2.0 A (2)
- 0.5 0.6 A (3)c
- 2.5 3.3 Watt (4)
Unit Note
Version 3.0 19.Apr.2011 10 / 26
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
PRODUCT SPECIFICATION
Note (3) The specified power supply current is under the conditions at Vcc = 5.0 V, Ta = 25 ± 2 ºC, Fr = 75Hz,
whereas a power dissipation check pattern below is displayed.
Note (4) The power consumption is specified at the pattern with the maximum current.
Note (5) VID waveform condition
Version 3.0 19.Apr.2011 11 / 26
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
4.3.2 Vcc Power Dip Condition
PRODUCT SPECIFICATION
4.3.3 BACKLIGHT UNIT
Parameter Symbol
LED Light Bar Input
Voltage Per Input Pin
LED Light Bar Current
Per Input Pin
VPIN - 24.8 27.2 V
IPIN - 65 70 mA
Min. Typ. Max.
LED Life Time LLED 40000 - - Hrs (3)
Power Consumption PBL - 6.448 7.616 W
Note (1) LED light bar input voltage and current are measured by utilizing a true RMS multimeter as shown
below:
Note (2) PBL = IPIN × VPIN × ( 4 ) input pins.
Note (3) The lifetime of LED is defined as the time when LED packages continue to operate under the
conditions at Ta = 25 ±2 and I= (65)mA (per chip) until the brightness becomes 50% of its
original value.
Power
CMO Converter
With PWM
Function
Function
generator
Value
V
PIN, IPIN
V
PIN, IPIN
V
LED
V
LED
V
PIN, IPIN
V
PIN, IPIN
Unit Note
(1),
Duty=100%,
IPIN=65mA
(1), (2)
Duty=100%
(1)
Duty=100%,
IPIN=65mA
LED Backlight Module
Version 3.0 19.Apr.2011 12 / 26
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
PRODUCT SPECIFICATION
4.4.3 LIGHTBAR Connector Pin Assignment
CN1
Pin number
1 Cathode of LED string1
2 Cathode of LED string2
3 VLED
4 VLED
5 Cathode of LED string3
6 Cathode of LED string4
Note(1) Connector: CI1406M1HRF-NH(CviLux) or equivalent.
Note(2) User’s mating connector part No.: CI1406SL000-NH (CviLux) or compatible and hook width must be less
than 4.5mm.
Description
Version 3.0 19.Apr.2011 13 / 26
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
PRODUCT SPECIFICATION
G3 G2 G1 G0
B6 B5 B4 B3 B2
1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1
0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : :0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : :0 0 0
0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0
0 0 : : 0 0
0 0 : : 0 0
0 0 : : 0 0
0 0 : : 0 0
0 0 : : 0 0
0 0 : : 0 0
0 0 : : 0 0
0 0 : : 0 0
0 0 : : 0 0
0 0 : : 0 0
0 0 : : 0 0
0 0 : : 0 0
0 0 : : 0 0
0 0 : : 0 0
0 0 : : 0 0
0 0 : : 0 0
0 0 : : 1 1
0 0 : : 1 1
0 0 : : 1 1
0 0 : : 1 1
0 0 : : 1 1
0 0 : : 1 1
0 1 : : 0 1
1 0 : : 1 0
4.4 LVDS INPUT SIGNAL SPECIFICATIONS
4.4.1 LVDS DATA MAPPING TABLE
LVDS Channel O0
LVDS Channel O1
LVDS Channel O2
LVDS Channel O3
LVDS output
Data order OG0 OR5 OR4 OR3 OR2 OR1 OR0
LVDS output
Data order OB1 OB0 OG5 OG4 OG3 OG2 OG1
LVDS output
Data order DE NA NA OB5 OB4 OB3 OB2
LVDS output
Data order NA OB7 OB6 OG7 OG6 OR7 OR6
4.4.2 COLOR DATA INPUT ASSIGNMENT
The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for the
color. The higher the binary input, the brighter the color. The table below provides the assignment of color
versus data input.
Color
R7 R6 R5 R4 R3 R2 R1 R0
Black
Red
Green
Basic
Colors
Gray
Scale
Of
Red
Gray
Scale
Of
Green
Gray
Scale
Of
Blue
Note (1) 0: Low Level Voltage, 1: High Level Voltage
Blue
Cyan
Magenta
Yellow
White
Red(0) / Dark
Red(1)
Red(2)
:
:
Red(253)
Red(254)
Red(255)
Green(0) / Dark
Green(1)
Green(2)
:
:
Green(253)
Green(254)
Green(255)
Blue(0) / Dark
Blue(1)
Blue(2)
:
:
Blue(253)
Blue(254)
Blue(255)
0
0
0
0
0
0
0
0
0
D7 D6 D4 D3 D2 D1 D0
D18 D15 D14 D13 D12 D9 D8
D26 D25 D24 D22 D21 D20 D19
D23 D17 D16 D11 D10 D5 D27
Data Signal
Red Green Blue
G
G
G
G
7
6
5
4
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
B
7
0
0
0
0
0
0
1
1
1
1
0
1
B
B
1
0
0
0
0
1
1
1
Version 3.0 19.Apr.2011 14 / 26
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
PRODUCT SPECIFICATION
4.5 DISPLAY TIMING SPECIFICATIONS
The input signal timing specifications are shown as the following table and timing diagram.
Signal Item Symbol Min. Typ. Max. Unit Note
Frequency Fc 62.9
Period Tc 10.5 13.2
Input cycle to
cycle jitter
LVDS Clock
Vertical
Display Term
Horizontal
Display Term
Note: Because this module is operated by DE only mode, Hsync and Vsync input signals are ignored.
Input Clock to data skew TLVCCS -0.02*Tc
Spread spectrum
modulation range
Spread spectrum
modulation frequency
Frame Rate Fr 50 60 76 Hz Tv=Tvd+Tvb
Total Tv 780 806 900 Th -
Active Display Tvd - 768 - Th -
Blank Tvb 18 38 132 Th -
Total Th 1400 1560 1800 Tc Th=Thd+Thb
Active Display Thd - 1366
Blank Thb 40 194 434 Tc -
-0.02*Tc
T
rcl
Fclkin_
mod
F
SSM
0.97*Fc
- - 100 KHz
75.4
- 0.02*Tc ns (1)
- 0.02*Tc ns (2)
- 1.03*Fc MHz
95.6 MHz
15.9 ns
- Tc -
-
(3)
INPUT SIGNAL TIMING DIAGRAM
Version 3.0 19.Apr.2011 15 / 26
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
PRODUCT SPECIFICATION
Note (1) The input clock cycle-to-cycle jitter is defined as below figures. Trcl = I T1 – TI
Note (2) Input Clock to data skew is defined as below figures.
Note (3) The SSCG (Spread spectrum clock generator) is defined as below figures.
Version 3.0 19.Apr.2011 16 / 26
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
PRODUCT SPECIFICATION
4.6 POWER ON/OFF SEQUENCE
The power sequence specifications are shown as the following table and diagram.
Timing Specifications:
Parameters
T1 0.1 - 10 ms
T2 0 30 50 ms
T3 200 250 - ms
T4 100 250 - ms
T5 0 20 50 ms
T6 0.1 - 50 ms
T7 1000 - - ms
Note (1) The supply voltage of the external system for the module input should be the same as the definition
of Vcc.
Note (2) When the backlight turns on before the LCD operation of the LCD turns off, the display may
momentarily become abnormal screen.
Note (3) In case of VCC = off level, please keep the level of input signals on the low or keep a high
impedance.
Note (4) T4 should be measured after the module has been fully discharged between power off and on
period.
Note (5) Interface signal shall not be kept at high impedance when the power is on.
Min Typ. Max
Values
Units
Note (6) CMI wont take any responsibility for the products which are damaged by the customers not
following the Power Sequence.
Note (7) There might be slight electronic noise when LCD is turned off (even backlight unit is also off). To
avoid this symptom, we suggest "Vcc falling timing" to follow "t6 spec".
Version 3.0 19.Apr.2011 17 / 26
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
PRODUCT SPECIFICATION
5. OPTICAL CHARACTERISTICS
5.1 TEST CONDITIONS
Item Symbol Value Unit
Ambient Temperature Ta
Ambient Humidity Ha
25±2
50±10
Supply Voltage VCC 5 V
Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS"
LED Light Bar Input Current
Per Input Pin
I
65 ± 1.9 mADC
PIN
PWM Duty Ratio D 100 %
LED Light Bar Test Converter
TEST01001 T2-A1
5.2 OPTICAL SPECIFICATIONS
The relative measurement methods of optical characteristics are shown in 5.2. The following items should be
measured under the test conditions described in 5.1 and stable environment shown in Note (5).
Item Symbol
Red
Color
Green
Chromaticity
(CIE 1931)
Blue
White
Center Luminance of White
(Center of Screen)
Contrast Ratio CR
Response Time
White Variation W
Viewing Angle
Viewing Angle
Horizontal
Vertical
Horizontal
Vertical
Rx 0.641
Ry 0.338
Gx 0.315
Gy 0.629
Bx 0.159
By 0.059
Wx 0.313
Wy
L
C
TR - 1.5 2.5
T
F
θx- + θx+
θy- + θy+
θx- + θx+
θy- + θy+
Condition Min. Typ. Max. Unit Note
θx=0°, θY =0°
Typ –
0.03
Typ +
0.03
CS-2000
R=G=B=255
Gray scale
0.329
200 250 - cd/m
700 1000 - - (2), (5)
=0°, θY =0°
θ
x
=0, Y =0 75 - - % (5), (6)
x
CR 10
CR 5
- 3.5 5.5
150 170 140 160 160
150
178 170 -
o
C
%RH
- (1), (5)
ms (3)
Deg.
Deg.
2
(4), (5)
(1), (5)
(1), (5)
Version 3.0 19.Apr.2011 18 / 26
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
Note (1) Definition of Viewing Angle (θx, θy):
PRODUCT SPECIFICATION
Note (2) Definition of Contrast Ratio (CR):
The contrast ratio can be calculated by the following expression.
Contrast Ratio (CR) = L255 / L0
L255: Luminance of gray level 255
L 0: Luminance of gray level 0
CR = CR (5)
CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (6).
Note (3) Definition of Response Time (TR, TF):
Version 3.0 19.Apr.2011 19 / 26
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
Note (4) Definition of Luminance of White (LC):
PRODUCT SPECIFICATION
Measure the luminance of gray level 255 at center point
LC = L (5)
L (x) is corresponding to the luminance of the point X at Figure in Note (6).
Note (5) Measurement Setup:
The LCD module should be stabilized at given temperature for 40 minutes to avoid abrupt
temperature change during measuring. In order to stabilize the luminance, the measurement should
be executed after lighting Backlight for 40 minutes in a windless room.
Note (6) Definition of White Variation (δW):
Measure the luminance of gray level 255 at 9 points
δW = ( Minimum [L (1) ~ L (9)] / Maximum [L (1) ~ L (9)] ) *100%
Version 3.0 19.Apr.2011 20 / 26
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
PRODUCT SPECIFICATION
6.
RELIABILITY
Temperature Humidity Bias (THB)
High Temperature Operation
Low Temperature Operation
High Temperature Storage (HTS)
Low Temperature Storage (LTS)
Thermal Shock Test (TST)
ESD (Electro Static Discharge)
Note (1) criteria : Normal display image with no obvious non-uniformity and no line defect.
TEST ITEM
Items Required Condition Note
Ta= 50 , 80%RH, 240hours
(HTO)
(LTO)
Vibration Test
(Non-operation)
Shock Test
(Non-operation)
On/Off Test
Air Discharge: ± 15KV, 150pF(330Ω)
Altitude Test
Ta= 50
Sweep: 30 Minutes each Axis (X, Y, Z)
Direction : ± X, ± Y, ± Z.(one time for
-20/30min , 60 / 30min , 100
25 ,On/10sec , Off /10sec , 30,000
Non-Operation:30,000 ft / 24hours
, 50%RH , 240hours
, 240hours
Ta= 0
Ta= 60 , 240hours
Ta= -20 , 240hours
Acceleration: 1.5 Grms
Wave: Half-sine
Frequency: 10 - 300 Hz
Acceleration: 50 G
Wave: Half-sine
Active Time: 11 ms
each Axis)
cycles
cycles
Contact Discharge: ± 8KV,
150pF(330Ω)
Operation:10,000 ft / 24hours
-
-
-
-
-
-
-
-
-
-
-
-
Note (2) Evaluation should be tested after storage at room temperature for more than two hours.
Note (3) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so
that the module would not be twisted or bent by the fixture.
The fixing condition is shown as below:
Version 3.0 19.Apr.2011 21 / 26
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
PRODUCT SPECIFICATION
7. PACKING
7.1 PACKING SPECIFICATIONS
(1) 13 LCD modules / 1 Box
(2) Box dimensions: 528(L) X 378(W) X 360(H) mm
(3) Weight: approximately: 22.5 kg (13 modules per box)
7.2 PACKING METHOD
(1) Carton Packing should have no failure in the following reliability test items.
Test Item Test Conditions Note
ISTA STANDARD
Random, Frequency Range: 1 – 200 Hz
Vibration
Dropping Test 1 Corner , 3 Edge, 6 Face, 45.7cm Non Operation
Top & Bottom: 30 minutes (+Z), 10 min (-Z),
Right & Left: 10 minutes (X)
Back & Forth 10 minutes (Y)
Non Operation
Figure. 7-1 Packing method
Version 3.0 19.Apr.2011 22 / 26
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
7.3 PALLET
PRODUCT SPECIFICATION
Figure. 7-2 Packing method
Version 3.0 19.Apr.2011 23 / 26
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
PRODUCT SPECIFICATION
Day: 1~31=1, 2, 3, ~, 9, A, B, C, ~, T, U, V
CMI5E22XXXX
XLXXLYMDNNNN
XXXXXXXYMDLNNNN
M185BGE
-
L22
8. CMI MODULE LABEL
The barcode nameplate is pasted on each module as illustration, and its definitions are as following
explanation.
(a) Model Name: M185BGE-L22
(b) Revision: Rev. XX, for example: A0, A1… B1, B2… or C1, C2…etc.
(c) CMI barcode definition:
Serial ID: XX-XX-X-XX-YMD-L-NNNN
Code Meaning Description
XX CMI internal use XX Revision Cover all the change
X CMI internal use -
XX CMI internal use -
Year: 0~9, 2001=1, 2002=2, 2003=3…2010=0, 2011=1, 2012=2…
YMD Year, month, day
L Product line # Line 1=1, Line 2=2, Line 3=3, …
NNNN Serial number Manufacturing sequence of product
(d) Customer’s barcode definition:
Serial ID: CM-I5E22-X-X-X-XX-L-XX-L-YMD-NNNN
Code Meaning Description
CM Supplier code CMI=CM
I5E22 Model number M185BGE-L22= I5E22
X Revision code Non ZBD: 1,2,~,8,9 / ZBD: A~Z
X Source driver IC code
X Gate driver IC code
XX Cell location Tainan Taiwan=TN, Ningbo China=CN, Hsinchu Taiwan=SC
L Cell line # 1,2,~,9,A,B,~,Y,Z
Month: 1~12=1, 2, 3, ~, 9, A, B, C
Day: 1~31=1, 2, 3, ~, 9, A, B, C, ~, W, X, Y, exclude I, O, and U.
Century=1, CLL=2, Demos=3, Epson=4, Fujitsu=5, Himax=6,
Hitachi=7, Hynix=8, LDI=9, Matsushita=A, NEC=B, Novatec=C,
OKI=D, Philips=E, Renasas=F, Samsung=G, Sanyo=H, Sharp=I, TI=J,
Topro=K, Toshiba=L, Windbond=M, ILITEK=Q, Fiti=Y, None IC =Z
XX Module location Tainan, Taiwan=TN ; Ningbo China=NP, Shenzhen China=SH
L Module line # 1,2,~,9,A,B,~,Y,Z
YMD Year, month, day
NNNN
Serial number By LCD supplier
Version 3.0 19.Apr.2011 24 / 26
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
Year: 0~9, 2001=1, 2002=2, 2003=3…2010=0, 2011=1, 2012=2…
Month: 1~12=1, 2, 3, ~, 9, A, B, C
PRODUCT SPECIFICATION
(e) FAB ID(UL Factory ID):
Region Factory ID
TWCMI GEMN
NBCMI LEOO
NBCME
NHCMI CAPG
9. PRECAUTIONS
9.1 ASSEMBLY AND HANDLING PRECAUTIONS
(1) Do not apply rough force such as bending or twisting to the module during assembly.
(2) To assemble or install module into user’s system can be only in clean working areas. The dust and oil
may cause electrical short or worsen the polarizer.
CANO
(3) It’s not permitted to have pressure or impulse on the module because the LCD panel and Backlight will
be damaged.
(4) Always follow the correct power sequence when LCD module is connecting and operating. This can
prevent damage to the CMOS LSI chips during latch-up.
(5) Do not pull the I/F connector in or out while the module is operating.
(6) Do not disassemble the module.
(7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and
easily scratched.
(8) It is dangerous that moisture come into or contacted the LCD module, because moisture may damage
LCD module when it is operating.
(9) High temperature or humidity may reduce the performance of module. Please store LCD module within
the specified storage conditions.
(10)When ambient temperature is lower than 10ºC may reduce the display quality. For example, the
response time will become slowly.
9.2 STORAGE PRECAUTIONS
(1) Do not leave the module in high temperature, and high humidity for a long time. It is highly recommended
to store the module with temperature from 0 to 35 and relative humidity of less than 70%.
(2) Do not store the TFT – LCD module in direct sunlight.
(3) The module should be stored in dark place. It is prohibited to apply sunlight or fluorescent light in storing.
9.3 OPERATION PRECAUTIONS
(1) The LCD product should be operated under normal condition.
Normal condition is defined as below :
Version 3.0 19.Apr.2011 25 / 26
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
PRODUCT SPECIFICATION
Temperature : 20±15
Humidity: 65±20%
Display pattern : continually changing pattern(Not stationary)
(2) If the product will be used in extreme conditions such as high temperature, high humidity, high
altitude ,display pattern or operation time etc…It is strongly recommended to contact CMI for application
engineering advice . Otherwise , Its reliability and function may not be guaranteed.
9.4 SAFETY PRECAUTIONS
(1) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case
of contact with hands, skin or clothes, it has to be washed away thoroughly with soap.
(2) After the module’s end of life, it is not harmful in case of normal operation and storage.
9.5 SAFETY STANDARDS
The LCD module should be certified with safety regulations as follows:
(1) UL60950-1 or updated standard.
(2) IEC60950-1 or updated standard.
9.6 OTHER
When fixed patterns are displayed for a long time, remnant image is likely to occur.
Appendix. OUTLINE DRAWING
Refer to next 2 pages.
Version 3.0 19.Apr.2011 26 / 26
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
Loading...