Chimei-Innolux Corporation
BT140GW02 V.5 LCD MODULE SPECIFICATION
( ) Preliminary Specification
(●) Final Specification
Customer Checked & Approved by
HP International Pte. Ltd.
Approved by Checked by Prepared by
MKT PD PM
www.jxlcd.com
www.jxlcd.com
楊竣傑 柯瑞峰 詹銘斯 陳郁甫
Chimei-Innolux Corporation
No.160 Kesyue Rd., Chu-Nan Site, Hsinchu Science Park,
Date: 2010/09/27
Chu-Nan 350, Miao-Li County, Taiwan
Tel: 886-37-586000 Fax: 886-37-586060
Version: 3
Record of Revision
Version Revise Date Page Content
0 2010/05/06 All First Edition issued
1 2010/05/19 16 Optical specifications
22 Label
2 2010/08/05 15 Optical specifications
3 2010/09/27 8 Add EBL data
20, 25 Label drawing & position
Chimei-I n n o l u x copyright
All rights reserved,
Copying forbidden.
www.jxlcd.com
www.jxlcd.com
Contents: Page
SPEC NO.
PAGE
BT140GW02 V.5
3/29
1 . General Specifications
2 . Electrical Specifications
2-1 Pin Assignment
2-2 Absolute Maximum Ratings
2-3 Electrical Characteristics
3 . Optical Specifications
4. Reliability Test Items
5. Safety
6. Display Quality
7. Handling Precaution
8. Label Definition
4
5
7
8
15
18
19
19
19
20
9. Packing Form
10. Mechanical Drawings
Appendix
www.jxlcd.com
www.jxlcd.com
23
24
26
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMI SSION FROM Chimei-Innolux
1. General Specifications
NO. Item Specification Unit
1 Display resolution (pixel) 1366(H) X 768(V), HD resolution
2 Active area 309.40(H) X 173.95(V) mm
3 Screen size 14.0 inches diagonal Inches
4 Pixel pitch 0.2265(H) X 0.2265(V) mm
5 Color configuration Stripe
SPEC NO.
PAGE
BT140GW02 V.5
4/29
6 Overall dimension
7 Weight
8 Surface treatment Anti Glare
9 Input color signal 6 bit LVDS
10 Display colors 262K (6 bit)
11 Optimum viewing direction 6 o’clock
12 Backlight W-LED
13 RoHS RoHS compliance
www.jxlcd.com
www.jxlcd.com
324(W) X 192.5(H) X 5.2(D) (max)
350Max.
mm
Grams
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMI SSION FROM Chimei-Innolux
2. Electrical Specifications
2-1 Pin Assignment
a. Panel connector
Connector Part No:
User’s connector Part No: 20453-040T-12(I-PEX) or equivalent
Pin No Symbol Description Remark
1 NC No connection (Reserve)
2 VCC Power Supply (+3.3V)
3 VCC Power Supply (+3.3V)
4 V
5
6 Clk
7 DATA
8 Rxin0- Differential Data Input
9 Rxin0+ Differential Data Input
10 GND Ground
11 Rxin1- Differential Data Input
12 Rxin1+ Differential Data Input
13 GND Ground
14 Rxin2- Differential Data Input
15 Rxin2+ Differential Data Input
16 GND Ground
17 CLK- Differential Clock Input
www.jxlcd.com
18 CLK+ Differential Clock Input
19 NC No connection (Reserve)
20 NC No connection (Reserve)
21 NC No connection (Reserve)
22 GND Ground
23 NC No connection (Reserve)
24 NC No connection (Reserve)
25 GND Ground
26 NC No connection (Reserve)
27 NC No connection (Reserve)
28 GND Ground
29 NC No connection (Reserve)
30 NC No connection (Reserve)
31 LED_GND LED Ground
32 LED_GND LED Ground
33 LED_GND LED Ground
34 NC No connection (Reserve)
35 LED_PWM PWM dimming signal input
36 LED_EN LED enable pin (3.3V)
37 NC No connection (Reserve)
38 V_LED LED power supply 6.0V~21V
39 V_LED LED power supply 6.0V~21V
40 V_LED LED power supply 6.0V~21V
www.jxlcd.com
GS13401-1110S-7H (Foxconn )
DDC Power +3.3V
EDID
NC No connection (Reserve)
DDC Clock
EDID
DDC Data
EDID
SPEC NO.
PAGE
BT140GW02 V.5
5/29
R0~R5,G0
G1~G5,B0,B1
B2~B5,DE,Hsync,Vsync
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMI SSION FROM Chimei-Innolux
b. General Block Diagram （Rear-side）
LED
Drive
FPC
GS13401-1110S-7H
DC/DC
VR
www.jxlcd.com
www.jxlcd.com
T-C
Connector plug in direction
GS13401-1110S-7H (Foxconn )
Pin1
SPEC NO.
PAGE
BT140GW02 V.5
6/29
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMI SSION FROM Chimei-Innolux
V
2-2. Absolute Maximum Ratings
SPEC NO.
PAGE
BT140GW02 V.5
7/29
Parameter Symbol
Min. Max.
Power input voltage V
Signal input voltage V
Operating temperature T
Storage temperature T
Re-screw - 5 Times
Assured torque at side mount - 2 kgf.cm
Note 1: The relative humidity must not exceed 90% non-condensing at temperatures of 40°C or less.
At temperatures greater than 40°C, the wet bulb temperature must not exceed 39°C.
Note 2: The unit should not be exposed to corrosive chemicals.
Relative Humidity (%RH)
-30 -20 -10 0 10 20 30 40 50 60 70
www.jxlcd.com
100
90
www.jxlcd.com
80
70
60
50
40
30
20
10
Operation Range
Storage Range
0
Temperature (°C)
- 0.3 4.0 V At 25°C
CC
- 0.3 4.0 V At 25°C
IN
0 50 °C Note 1
OP
- 20 60 °C Note 2
ST
alues
Unit
Remark
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMI SSION FROM Chimei-Innolux
2-3. Electrical Characteristics
a. Typical operating conditions
Item Symbol Min. Typ. Max. Unit Remark
SPEC NO.
PAGE
BT140GW02 V.5
8/29
Power input voltage
Permissive power input ripple
Power input current
Power consumption
LED PWR @60 Nits
EBL Power
Differential input high
threshold voltage
Differential input low
LVDS
interface
threshold voltage
Common input
voltage
Terminating resistor
www.jxlcd.com
www.jxlcd.com
3 3.3 3.6 V
V
CC
V
- - 0.1 V
RF
- 260 300 mA Note 1
I
CC
P
- 0.85 1 Watts Note 1
C
P
0.7 0.75 Watts
C
1.45 1.5 Watts
P
C
V
- - +100 mV
LVT H
V
-100 - - mV
LVT L
V
1.0 1.2 1.4 V Note 2
LVC
R
90 100 110 ohm
T
+ BL@60Nits
White patten
V
=1.2V,
LVC
Note 2
V
=1.2V,
LVC
Note 2
Rush current
LED rush current
Note 1: The specified input current and power consumption are under the V
=60Hz (frame frequency) condition whereas mosaic pattern is displayed.
f
V
Note 2: LVDS waveform diagram
Rxin+/CLK+
Rxin-/CLK-
I
- - 1.5 A Note 3
Rush
I
LED-Rush
- - 3.0 A Note 4
V
LVC
GND
=3.3 V, 25°C,
cc
V
LVT H
V
LVT L
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMI SSION FROM Chimei-Innolux
SPEC NO.
PAGE
BT140GW02 V.5
9/29
Note 3: Test condition
(1) Pattern: Black pattern
(2) V
= 3.3 V, V
CC
rising time = 470 μs ± 10%
CC
Control signal
(High to low)
90%
10%
V
CC
Ton=470µs±10%
(3) Test circuit
3.3 V
R1
47K
R2
www.jxlcd.com
www.jxlcd.com
12V
C3
1uF
1K
R3
47K
M1
2SK1059
C2
10000pF
M2
2SK1399
FUSE
C1
1uF
VCC ( LCD input)
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMI SSION FROM Chimei-Innolux
_
SPEC NO.
PAGE
BT140GW02 V.5
10/29
Note 4: Test condition
(1) Pattern: LED duty 100％
(2) V_LED = 12.0V, V_LED rising time = 470
μs ± 10%
Control signal
(High to low)
90%
10%
V
LED
Ton=470µs±10%
(3) Test circuit
12 V
R1
47K
www.jxlcd.com
www.jxlcd.com
21V
C3
1uF
R2
1K
R3
47K
M1
2SK1059
C2
10000pF
M2
2SK1399
FUSE
C1
1uF
V_LED
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMI SSION FROM Chimei-Innolux
b. Power sequence
SPEC NO.
PAGE
BT140GW02 V.5
11/29
Power supply for LCD, VCC
Interface data signal, V
(LVDS signal of transmitter)
Backlight on/off
Power sequence timing table
Parameter
T1 0.5 - 10 ms
T2 0 - 50 ms
i
Min. Typ. Max.
0V
10%
90%
T1
0V
Value
90%
10%
T
T
T
2
Valid Data
T
3
Lamp On OFF OFF
T
5
T
4
7
6
Units
T3 200 - - ms
www.jxlcd.com
T4 200 - - ms
www.jxlcd.com
T5 0 - 50 ms
T6 0.5 - 10 ms
T7 400 - - ms
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMI SSION FROM Chimei-Innolux
c. Display color vs. input data signals
Signal Name Description Remark
SPEC NO.
PAGE
BT140GW02 V.5
12/29
R5 Red Data 5 (MSB)
R4 Red Data 4
R3 Red Data 3
R2 Red Data 2
R1 Red Data 1
R0 Red Data 0 (LSB)
Red-pixel Data
G5 Green Data 5 (MSB)
G4 Green Data 4
G3 Green Data 3
G2 Green Data 2
G1 Green Data 1
G0 Green Data 0 (LSB)
Green-pixel Data
B5 Blue Data 5 (MSB)
B4 Blue Data 4
B3 Blue Data 3
B2 Blue Data 2
Red-pixel data. Each red pixel's brightness data
consists of these 6 bits pixel data.
Green-pixel data. Each green pixel's brightness
data consists of these 6 bits pixel data.
Blue-pixel data. Each blue pixel's brightness data
consists of these 6 bits pixel data.
B1 Blue Data 1
B0 Blue Data 0 (LSB)
www.jxlcd.com
www.jxlcd.com
Blue-pixel Data
Signal for 1 DCLK cycle (t
)
CLK
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMI SSION FROM Chimei-Innolux
d. Input signal timing
Timing table
Description Symbol Min Typ Max Unit
Frame rate -- 40 60 -- Hz
SPEC NO.
PAGE
BT140GW02 V.5
13/29
//
Clock freq. 1/t
Line cycle time tH 1456 1466 1492
Line width-active tHd 1366 1366 1366
Frame cycle time tV 776 788 793 tH
V width-active tVd 768 768 768 tH
DE
DE
DCLK
www.jxlcd.com
www.jxlcd.com
t
CLK
45 69.3 85 MHz
CLK
t
V
t
Vd
t
H
t
Hd
t
CLK
t
CLK
e. Display position
D(1, 1) D(2, 1) …… D(683, 1) …… D(1365, 1) D(1366, 1)
D(1, 2) D(2, 2) …… D(683, 2) …… D(1365, 2) D(1366, 2)
.
.
.
D(1, 384) D(2, 384) …… D(683, 384) …… D(1365, 384) D(1366, 384)
.
.
.
D(1, 767) D(2, 767) …… D(683, 767) …… D(1365, 767) D(1366, 767)
D(1, 768) D(2, 768) …… D(683, 768) …… D(1365, 768) D(1366, 768)
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMI SSION FROM Chimei-Innolux
……
……
.
.
.
.
.
.
……
……
.
.
.
.
.
.
.
.
.
.
.
.
f. Backlight driving conditions
Parameter Symbol Min. Typ. Max. Unit Remark
SPEC NO.
PAGE
BT140GW02 V.5
14/29
LED forward voltage V
LED forward current
Power consumption
Input PWM frequency F
Duty ratio - 5 100 % Note 1
LED life time - 15,000 Hr T = 25°C , Note 2
Note 1: PWM duty cycle linearity guarantees 10~100%.
Note 2: LED life time definition is brightness decrease to 50% of initial or abnormal lighting.
g. Module function block
www.jxlcd.com
www.jxlcd.com
LED driver
controller
3 3.2 3.4 V
F
IF 20 mA
P
3 W
LED
190 2000 Hz T = 25°C
PWM
LED Light-bar
TFT-LCD
Source driver
Timing
Step-up regulator
& reference voltage
generator
LVDS connector
rms
rms
Gate driver
EDID
EEPROM
T = 25°C
T = 25°C
T = 25°C
LVDS DATA BUS mini-LVDS & CONTROL BUS POWER I2C BUS
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMI SSION FROM Chimei-Innolux
SPEC NO.
PAGE
BT140GW02 V.5
15/29
3. Optical specifications
Ambient temperature = 25°C
Item Symbol Condition
Specification
Min. Typ. Max.
Unit Remark
Response time
Contrast ratio CR
Viewing angle
Brightness
(5 points average)
Color chromaticity (CIE)
www.jxlcd.com
www.jxlcd.com
Tr+Tf θ= 0°
θ= 0°
Top
Bottom
Left
Right
170 200 nit Note 2,5
Y
L
Wx
Wy
Rx
Ry
Gx
Gy
Bx
CR≧10
CR≧10
CR≧10
CR≧10
θ= 0°
500 Note 2,4
15
30
40
40
-0.03
8 16 ms Note 3
deg Note 2,4,6
0.313
0.329
0.586
0.355
0.323
0.57
0.163
+0.03
Note 2
B
y
Color Gamut NTSC CIE1931 45 % -
δ
0.8 Note 2,7
W(5)
White uniformity
δ
0.65
W(13)
Cross talk Ct 2% Note 8
Note 1: To be measured in dark room.
Note 2: To be measured with a viewing cone of 2°by Topcon luminance meter BM-5A.
Note 3: Definition of response time:
The output signals of BM-7 are measured when the input signals are changed from “Black” to
“White” (falling time) and from “White” to “Black” (rising time), respectively. The response time
interval is between 10% and 90% of amplitudes. Refer to figure as below.
0.141
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMI SSION FROM Chimei-Innolux
(
Avg
)
SPEC NO.
PAGE
BT140GW02 V.5
16/29
100%
S
i
90%
g
n
a
l
(
R
e
l
a
t
i
v
e
v
a
l
u
10%
e
)
0%
Note 4: Definition of contrast ratio:
Contrast ratio is calculated with the following formula:
Note 5: Driving current for LED should be 20 mA.
Note 6: Definition of viewing angle
Contrast ratio
Luminance is measured at the following thirteen points (1~13):
Y
= (Y5+ Y10+Y11+Y12 +Y13) / 5
L
www.jxlcd.com
www.jxlcd.com
Tr
of 5pts
=
"Black"
L white (Avg of 5pts.)
L
Black (Avg of 5pts.)
"White""White"
Tf
Note 7: Definition white uniformity
Luminance is measured at the following thirteen points (1~13):
δ
Minimum brightness of thirteen points
W(13) =
δ
W(5) =
Maximum brightness of thirteen points
Minimumbrightness of five points
Maximum brightness of five points
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMI SSION FROM Chimei-Innolux
13 point measuring locations refer to the point 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 and 13.
5 point measuring locations refer to the point 5, 10, 11, 12 and 13.
SPEC NO.
PAGE
BT140GW02 V.5
17/29
Note 8:
1/2
www.jxlcd.com
www.jxlcd.com
32 gray level 32 gray level
Unit: percentage of dimension of display area
l L
l L
l / LA x 100%= 2% max., LA and L
A-LA’
l / LB x 100%= 2% max., LB’ and LB’ are brightness at location B and B’
B-LB’
A
1/6
B
1/6
1/2
2/3 1/3
are brightness at location A and A’
A’
1/2
A’
0 gray level
1/6
1/6
1/3
1/2
B’
2/3
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMI SSION FROM Chimei-Innolux
4. Reliability test items
Test Item Test Condition Judgment Remark
SPEC NO.
PAGE
BT140GW02 V.5
18/29
High temperature storage
Low temperature storage
High temperature & high
humidity operation
High temperature operation
Low temperature operation
Thermal Shock
(Non-operation)
Electrostatic discharge (ESD)
Vibration
(Non-operation)
Mechanical shock
(Non-operation)
www.jxlcd.com
www.jxlcd.com
60°C, 240 hours
-20°C, 240 hours
50°C, 80% RH, 240 hours
(No condensation)
50°C, 240 hours
0°C, 240 hours
-25°C / 30 mins ~ 65°C / 30 mins
100 cycles
150 pF, 330Ω,
Contact: ±8kV, Air: ±15kV
1.5Grms, 10 to 500 Hz random; 0.5hr in
each perpendicular axes ( X, Y, Z ).
220G/2ms, Half sine wave, ±X, ±Y, ±Z one
time for each direction
Note 1 Note 2
Note 1 Note 2
Note 1 Note 2
Note 1 Note 2
Note 1 Note 2
Note 1 Note 2
Note 1
Note 1 Note 2
Note 1 Note 2
Note 1: Pass: Normal display image with no obvious non-uniformity and no line defect.
Fail: No display image, obvious non-uniformity, or line defects.
Partial transformation of the module parts should be ignored.
Note 2: Evaluation should be tested after storage at room temperature for more than one hour.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMI SSION FROM Chimei-Innolux
SPEC NO.
PAGE
BT140GW02 V.5
19/29
5. Safety
5-1. Sharp edge requirements
There will be no sharp edges or corners on the display assembly that could cause injury.
5-2. Materials
a. Toxicity
There will be no carcinogenic materials used anywhere in the display module. If toxic materials
are used, they will be reviewed and approved by the responsible InnoLux Toxicologist.
b. Flammability
All components including electrical components that do not meet the flammability grade UL94-V0
in the module will complete the flammability rating exception approval process. The printed circuit
board will be made from material rated 94-V0 or better. The actual UL flammability rating will be
printed on the printed circuit board.
c. Capacitors
If any polarized capacitors are used in the display assembly, provisions will be made to keep
them from being inserted backwards.
6. Display quality
The display quality of the color TFT-LCD module should be in compliance with the InnoLux
incoming inspection standard.
www.jxlcd.com
www.jxlcd.com
7. Handling precaution
(1) Do not apply rough force such as bending or twisting to the module during assembly.
(2) To assemble or install module into user’s system can be only in clean working areas. The
dust and oil may cause electrical short or worsen the polarizer.
(3) It’s not permitted to have pressure or impulse on the module because the LCD panel and
backlight will be damaged.
(4) Always follow the correct power sequence when LCD module is connecting and
operating.
(5) Do not pull the I/F connector in or out while the module is operating.
(6) Do not disassemble the module.
(7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is
very soft and easily scratched.
(8) It is dangerous that moisture come into or contacted the LCD module, because moisture
may damage LCD module when it is operating.
(9) High temperature or humidity may reduce the performance of module. Please store LCD
module within the specified storage conditions.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMI SSION FROM Chimei-Innolux
SPEC NO.
PAGE
BT140GW02 V.5
20/29
8. Label Definition
8-1. Module label
BT140GW02 V.5 AB1400002 50X
X X X X X X X Y M D L N N N N
(1) Model Number : BT140GW02
(2) Version : V.5
(3) Product Number : AB140000250X
(4) Serial ID: X X X X X X X Y M D L N N N N
(5) Production Location: MADE IN XXXX.
(6) UL/CB logo: “XXXX” especially stands for panel manufactured by CMI Ningbo satisfying UL/CB
CT: C-BNCL –Z5Z6 –Z7Z8 –Z9Z
10 –Z11Z12Z13
MADE IN CHINA
73mm
www.jxlcd.com
www.jxlcd.com
requirement. “LEOO” “CANO” is the CMI’s UL factory code for Ningbo factory.
Serial No.
Product stroke
Year, Month, Date
CMI Internal Use
Revision
CMI Internal Use
23mm
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMI SSION FROM Chimei-Innolux
SPEC NO.
PAGE
BT140GW02 V.5
21/29
(7) Serial ID II (For HP):
CT: C – BNCL –Z5Z
Unique Sequence Identifier
6 –Z7Z8
Week/Year of MFG
Supplier/Site of MFG
Assembly Code
Commodity Code
Commodity Tracking Label Designator
Serial ID II includes the information as below:
www.jxlcd.com
www.jxlcd.com
– Z9Z
– Z11Z12Z
10
13
Revision Level
(a) Commodity Tracking Label Designator: an identifier for the printed , human readable number only,
do not include the characters “CT:” within the barcode.
(b) Commodity Code: C(LCD Display Module)
(c) Assembly Code: BNCL
(d) Revision Level: RR
(e) Supplier/Site of MFG: 5C (Follow HP definition for CMI Fab)
(f) Week/Year of MFG: WW
(g) Unique Sequence Identifier:
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMI SSION FROM Chimei-Innolux
8-1. Carton label
SPEC NO.
PAGE
BT140GW02 V.5
22/29
M
BOX ID:
HP PN: 622560- J91
Model No. BT140GW02 V.5
Quantity: XX PCS
MFG Date: XXXX/XX/XX
QC:
MADE IN CHINA
(1) Model No. : BT140GW02
(2) Version: V.5
(3) Package Quantity:
(4) MFG Date: Year/Month/Date
(5) Serial ID: X X X X X X X Y M D L N N N
www.jxlcd.com
www.jxlcd.com
INNOLUX DISPLAY
X X X X X X X Y M D L N N N
XX PCS
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMI SSION FROM Chimei-Innolux
90.5mm
55mm
AB1400002 50X
20mm
Serial No.
Product stroke
Year, Month, Date
CMI Internal Use
Revision
CMI Internal Use
53.5mm
p
r
9.Packing Form
Lowe
Carton
SPEC NO.
PAGE
Cushion
Step E
BT140GW02 V.5
23/29
www.jxlcd.com
www.jxlcd.com
F
Ste
Upper Cushion
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMI SSION FROM Chimei-Innolux
10. Mechanical Drawings
10-1 Front Side
SPEC NO.
PAGE
BT140GW02 V.5
24/29
www.jxlcd.com
www.jxlcd.com
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMI SSION FROM Chimei-Innolux
10-2 Rear side
www.jxlcd.com
www.jxlcd.com
SPEC NO.
PAGE
BT140GW0X V.X AB140000X X0X
BT140GW02 V.5
25/29
MADE IN CHINA
Z1Z2Z3Z4Z5Z6 –Z7 –Z8Z9Z10Z11Z12
CT: C-Z1Z2Z3Z4 –Z5Z6 –Z7Z8 –Z9Z10 –Z11Z12Z13
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMI SSION FROM Chimei-Innolux
Appendix: EDID Code
Byte
(Hex)
Header
00
Header
01
Header
02
Header
03
Header
04
Header
EDID Version
Vendor / Product
Display
Parameters
Panel Color Coordinates
Header
05
Header
06
Header
07
EISA manufacture code ( 3 Character ID ) " INL"
08
EISA manufacture code (Compressed ASCⅡ)
09
Panel Supplier Reserved - Product Code
0A
( Hex. LSB first )
0B
LCD Module Serial No - Preferred but Optional ("0" If not used)
0C
LCD Module Serial No - Preferred but Optional ("0" If not used)
0D
LCD Module Serial No - Preferred but Optional ("0" If not used)
0E
LCD Module Serial No - Preferred but Optional ("0" If not used)
0F
Week of Manufacture 00 weeks
10
11
12
13
14
15
16
17
18
19
1A
1B
1C
1D
1E
1F
20
21
22
www.jxlcd.com
www.jxlcd.com
Year of Manufacture 2010 years
EDID structure version # = 1
EDID revision # = 3
Video input Definition = Digital signal
Max H image size (Rounded cm) = 31 cm
Max V image size (Rounded cm) = 18 cm
Display gamma = (gamma*100)-100 = Example:(2.2*100)-100=120 = 2.2 Gamma
Feature Support (no_DPMS, no_Active Off/Very Low Power, RGB color display, Timing BLK
1,no_ GTF)
Red/Green Low Bits (RxRy/GxGy)
Blue/White Low Bits (BxBy/WxWy)
Red X Rx = 0.580
Red Y Ry = 0.340
Green X Gx = 0.310
Green Y Gy = 0.550
Blue X Bx = 0.155
Blue Y By = 0.155
White X Wx = 0.313
White Y Wy = 0.329
Field Name and Comments
SPEC NO.
PAGE
BT140GW02 V.5
26/29
Value
(Hex)
FF
FF
FF
FF
FF
FF
CC
1F
0A
F5
4F
8C
00
00
25
28
00
00
00
00
00
00
14
01
03
80
12
78
87
94
57
27
27
50
54
Value
(Bin)
00000000
11111111
11111111
11111111
11111111
11111111
11111111
00000000
00100101
11001100
00101000
00000000
00000000
00000000
00000000
00000000
00000000
00010100
00000001
00000011
10000000
00011111
00010010
01111000
00001010
10000111
11110101
10010100
01010111
01001111
10001100
00100111
00100111
01010000
01010100
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMI SSION FROM Chimei-Innolux
SPEC NO.
PAGE
BT140GW02 V.5
27/29
Established timing 1 (00h if not used)
23
Established timing 2 (00h if not used)
24
Timings
Established
Standard Timing ID
Timing Descriptor #1
Manufacturer's timings (00h if not used)
25
Standard timing ID1 (01h if not used)
26
Standard timing ID1 (01h if not used)
27
Standard timing ID2 (01h if not used)
28
Standard timing ID2 (01h if not used)
29
Standard timing ID3 (01h if not used)
2A
Standard timing ID3 (01h if not used)
2B
Standard timing ID4 (01h if not used)
2C
Standard timing ID4 (01h if not used)
2D
Standard timing ID5 (01h if not used)
2E
Standard timing ID5 (01h if not used)
2F
Standard timing ID6 (01h if not used)
30
Standard timing ID6 (01h if not used)
31
Standard timing ID7 (01h if not used)
32
Standard timing ID7 (01h if not used)
33
Standard timing ID8 (01h if not used)
34
Standard timing ID8 (01h if not used)
35
Pixel Clock/10,000 (LSB) 69.3 MHz @ 60Hz
36
37
38
39
3A
3B
3C
3D
3E
3F
40
41
42
43
44
45
46
47
www.jxlcd.com
www.jxlcd.com
Pixel Clock/10,000 (MSB)
Horizontal Active (lower 8 bits) 1366 Pixels
Horizontal Blanking(Thp-HA) (lower 8 bits) 100 Pixels
Horizontal Active / Horizontal Blanking(Thp-HA) (upper 4:4bits)
Vertical Avtive 768 Lines
Vertical Blanking (Tvp-HA) (DE Blanking typ.for DE only panels) 20 Lines
Vertical Active : Vertical Blanking (Tvp-HA) (upper 4:4bits)
Horizontal Sync. Offset (Thfp) 48 Pixels
Horizontal Sync Pulse Width (HSPW) 32 Pixels
Vertical Sync Offset(Tvfp) : Sync Width (VSPW) 1 Lines : 4 Lines
Horizontal Vertical Sync Offset/Width (upper 2bits)
Horizontal Image Size (mm) 309 mm
Vertical Image Size (mm) 174 mm
Horizontal Image Size / Vertical Image Size
Horizontal Border = 0 (Zero for Notebook LCD)
Vertical Border = 0 (Zero for Notebook LCD)
Non-Interlace, Normal display, no stereo, Digital Separate ( Vsync_NEG, Hsync_NEG ), DE
only note : LSB is set to '1' if panel is DE-timing only. H/V can be ignored.
00
00
00
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
12
1B
56
64
50
00
14
30
30
20
14
00
35
AE
10
00
00
18
00000000
00000000
00000000
00000001
00000001
00000001
00000001
00000001
00000001
00000001
00000001
00000001
00000001
00000001
00000001
00000001
00000001
00000001
00000001
00010010
00011011
01010110
01100100
01010000
00000000
00010100
00110000
00110000
00100000
00010100
00000000
00110101
10101110
00010000
00000000
00000000
00011000
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMI SSION FROM Chimei-Innolux
SPEC NO.
PAGE
BT140GW02 V.5
28/29
Flag
48
Flag
49
Flag
4A
Data Type Tag (Descriptor Defined by manufacturer )
4B
Flag
4C
Descriptor Defined by manufacturer
4D
Descriptor Defined by manufacturer
4E
Descriptor Defined by manufacturer
4F
Descriptor Defined by manufacturer
50
Descriptor Defined by manufacturer
51
Descriptor Defined by manufacturer
52
Descriptor Defined by manufacturer
53
Descriptor Defined by manufacturer
54
Timing Descriptor #2
Descriptor Defined by manufacturer
55
Descriptor Defined by manufacturer
56
Descriptor Defined by manufacturer
57
Descriptor Defined by manufacturer
58
Descriptor Defined by manufacturer
59
Flag
5A
Flag
5B
Flag
5C
www.jxlcd.com
www.jxlcd.com
Data Type Tag ( ASCII String )
5D
Flag
5E
ASCII String "I"
5F
ASCII String "N"
60
ASCII String "L"
61
ASCII String
62
ASCII String
63
ASCII String
64
ASCII String
65
ASCII String
66
Timing Descriptor #3
ASCII String
67
ASCII String
68
Manufacturer P/N(If<13 char--> 0Ah, then terminate with ASCⅡ code 0Ah,set remaining
69
char = 20h)
Manufacturer P/N(If<13 char--> 0Ah, then terminate with ASCⅡ code 0Ah,set remaining
6A
char = 20h)
Manufacturer P/N(If<13 char--> 0Ah, then terminate with ASCⅡ code 0Ah,set remaining
6B
char = 20h)
00
00
00
00
00
20
20
20
20
20
20
20
20
20
20
20
20
20
00
00
00
FE
00
49
4E
4C
0A
20
20
20
20
20
20
20
20
20
00000000
00000000
00000000
00000000
00000000
00100000
00100000
00100000
00100000
00100000
00100000
00100000
00100000
00100000
00100000
00100000
00100000
00100000
00000000
00000000
00000000
11111110
00000000
01001001
01001110
01001100
00001010
00100000
00100000
00100000
00100000
00100000
00100000
00100000
00100000
00100000
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMI SSION FROM Chimei-Innolux
SPEC NO.
PAGE
BT140GW02 V.5
29/29
Flag
6C
Flag
6D
Flag
6E
Data Type Tag ( ASCII String )
6F
Flag
70
Monitor Name, stored as ASCII "B"
71
Monitor Name, stored as ASCII "T"
72
Monitor Name, stored as ASCII "1"
73
Monitor Name, stored as ASCII "4"
74
Monitor Name, stored as ASCII "0"
75
Monitor Name, stored as ASCII "G"
76
Monitor Name, stored as ASCII "W"
77
Monitor Name, stored as ASCII "0"
78
Timing Descriptor #4
Monitor Name, stored as ASCII "2"
79
Monitor Name, stored as ASCII "V"
7A
Monitor Name, stored as ASCII "5"
7B
Monitor Name, stored as ASCII
7C
Monitor Name, stored as ASCII
7D
Extension flag (# of optional 128 panel ID extension block to follow, Typ = 0)
7E
00
00
00
FE
00
42
54
31
34
30
47
57
30
32
56
35
0A
20
00
00000000
00000000
00000000
11111110
00000000
01000010
01010100
00110001
00110100
00110000
01000111
01010111
00110000
00110010
01010110
00110101
00001010
00100000
00000000
Checksum
Check Sum (The 1-byte sum of all 128 bytes in this panel ID block shall = 0)
7F
www.jxlcd.com
www.jxlcd.com
EB
11101011
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMI SSION FROM Chimei-Innolux
Loading...