INNOLUX BT140GW01 V.7 Specification

Chimei-Innolux Corporation

BT140GW01 V.7 LCD MODULE SPECIFICATION

( ) Preliminary Specification
(●) Final Specification

Customer Checked & Approved by

Lenovo China

Approved by Checked by Prepared by

MKT PD PM

楊竣傑 柯瑞峰 詹銘斯 陳郁甫

Chimei-Innolux Corporation

No.160 Kesyue Rd., Chu-Nan Site, Hsinchu Science Park,

Chu-Nan 350, Miao-Li County, Taiwan

Date: 2010/10/13

Tel: [phone] Fax: [phone]

Version: 6

Record of Revision

Version Revise Date Page Content

Chimei-Innolux copyright
All rights reserved,
Copying forbidden.

0

1 2010/04/16 5 Pin Assignment

2 2010/05/19

3 2010/06/11 16 Color chromaticity

4 2010/0625 26~29 EDID Table

5 2010/09/03 21 Label Drawing

2010/04/13

All First Edition issued

8 Typical operating conditions

26~29 EDID Table

16

21 Label

Optical specifications

25 Label Position

6 2010/10/22 22 Carton Label Definition

23 Package Method

25 ME Drawing ( Label drawing )

SPEC NO.

PAGE

BT140GW01 V.7

3/29

Contents: Page

1 . General Specifications

2 . Electrical Specifications
2-1 Pin Assignment
2-2 Absolute Maximum Ratings

2-3 Electrical Characteristics

3 . Optical Specifications

4. Reliability Test Items

5. Safety

6. Display Quality

7. Handling Precaution

8. Label Definition

4

5
7
8

16

19

20

20

20

21

9. Packing Form

10. Mechanical Drawings

Appendix

23

24

26

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANS FORMED TO ANY OTHER FORMS W IT HOUT P ER MISSION FROM Chimei-Innolux.

SPEC NO.

PAGE

BT140GW01 V.7

4/29

1. General Specifications

NO. Item Specification Unit

1 Display resolution (pixel) 1366(H) X 768(V), HD resolution

2 Active area 309.40(H) X 173.95(V) mm

3 Screen size 14.0 inches diagonal Inches

4 Pixel pitch 0.2265(H) X 0.2265(V) mm

5 Color configuration Stripe

6 Overall dimension

7 Weight

324(W) X 192.5(H) X 5.2(D) (max)

350Max.

mm

Grams

8 Surface treatment Glare, 3H

9 Input color signal 6 bit LVDS

10 Display colors 262K (6 bit)

11 Optimum viewing direction 6 o’clock

12 Backlight W-LED

13 RoHS RoHS compliance

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANS FORMED TO ANY OTHER FORMS W IT HOUT P ER MISSION FROM Chimei-Innolux.

SPEC NO.

PAGE

BT140GW01 V.7

5/29

2. Electrical Specifications

2-1 Pin Assignment

a. Panel connector

Connector Part No:

User’s connector Part No: 20453-040T-12 (I-PEX) or equivalent

Pin No Symbol Description Remark

GS13401-1110S-7H (Foxconn )

1

NC No connection (Reserve)
2 VCC Power Supply (+3.3V)

3 VCC Power Supply (+3.3V)

4 V

DDC Power +3.3V

EDID

5 NC No connection (Reserve)
6 Clk
7 DATA
8 Rxin0- Differential Data Input
9 Rxin0+ Differential Data Input

DDC Clock

EDID

DDC Data

EDID

R0~R5,G0

10 GND Ground

11 Rxin1- Differential Data Input

12 Rxin1+ Differential Data Input

G1~G5,B0,B1

13 GND Ground

14 Rxin2- Differential Data Input

B2~B5,DE,Hsync,Vsync

15 Rxin2+ Differential Data Input
16 GND Ground

17 CLK- Differential Clock Input
18 CLK+ Differential Clock Input
19 NC No connection (Reserve)
20 NC No connection (Reserve)
21 NC No connection (Reserve)
22 GND Ground
23 NC No connection (Reserve)
24 NC No connection (Reserve)
25 GND Ground
26 NC No connection (Reserve)
27 NC No connection (Reserve)
28 GND Ground
29 NC No connection (Reserve)
30 NC No connection (Reserve)
31 LED_GND LED Ground
32 LED_GND LED Ground
33 LED_GND LED Ground
34 NC No connection (Reserve)
35 LED_PWM PWM dimming signal input
36 LED_EN LED enable pin (3.3V)
37 NC No connection (Reserve)
38 V_LED LED power supply 6.0V~21V
39 V_LED LED power supply 6.0V~21V
40 V_LED LED power supply 6.0V~21V

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANS FORMED TO ANY OTHER FORMS W IT HOUT P ER MISSION FROM Chimei-Innolux.

SPEC NO.

PAGE

BT140GW01 V.7

6/29

b. General Block Diagram

FPC

LED
Drive

DC/DC

VR

GS13401-1110S-7H

T-C

Connector plug in direction

Pin1

GS13401-1110S-7H (Foxconn )

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANS FORMED TO ANY OTHER FORMS W IT HOUT P ER MISSION FROM Chimei-Innolux.

V

SPEC NO.

PAGE

BT140GW01 V.7

7/29

2-2. Absolute Maximum Ratings

Parameter Symbol

alues

Unit

Remark

Min. Max.

Power input voltage V

Signal input voltage V

Operating temperature T

Storage temperature T

- 0.3 4.0 V At 25°C

CC

- 0.3 4.0 V At 25°C

IN

0 50 °C Note 1

OP

- 20 60 °C Note 2

ST

Note 1: The relative humidity must not exceed 90% non-condensing at temperatures of 40°C or less. At

temperatures greater than 40°C, the wet bulb temperature must not exceed 39°C.

Note 2: The unit should not be exposed to corrosive chemicals.

Relative Humidity (%RH)

100

90

80

70

60

50

Operation Range

-30 -20 -10 0 10 20 30 40 50 60 70

40

30

20

Storage Range

10

0

Temperature (°C)

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANS FORMED TO ANY OTHER FORMS W IT HOUT P ER MISSION FROM Chimei-Innolux.

SPEC NO.

PAGE

BT140GW01 V.7

8/29

2-3. Electrical Characteristics

a. Typical operating conditions

Item Symbol Min. Typ. Max. Unit Remark

Power input voltage

Permissive power input ripple

Power input current

Power consumption

Differential input high

threshold voltage

Differential input low

LVDS

interface

threshold voltage

Common input

voltage

Terminating resistor

Rush current

LED rush current

V

3 3.3 3.6 V

CC

V

- - 0.1 V

RF

I

- 300 330 mA Note 1

CC

P

- 1 1.2 Watts Note 1

C

V

- - +100 mV

LVT H

V

-100 - - mV

LVT L

V

1.0 1.2 1.4 V

LVC

R

90 100 110 ohm

T

I

- - 1.5 A Note 3

Rush

I

LED-Rush

- - 3.0 A Note 4

Note 1: The specified input current and power consumption are under the V

(frame frequency) condition whereas mosaic pattern is displayed.

Note 2: LVDS waveform diagram

Rxin+/CLK+

Rxin-/CLK-

LVDS

interface

=3.3 V, 25°C, f

cc

V

V

LVT H

LVT L

=60Hz

V

V

LVC

GND

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANS FORMED TO ANY OTHER FORMS W IT HOUT P ER MISSION FROM Chimei-Innolux.

SPEC NO.

PAGE

BT140GW01 V.7

9/29

Note 3: Test condition

(1) Pattern: Black pattern
(2) V

= 3.3 V, V

CC

rising time = 470 μs ± 10%

CC

Control signal

(High to low)

90%

10%

(3) Test circuit

12V

V

CC

Ton=470µs±10%

3.3 V

R1

47K

R2

1K

C2

10000pF

C3

1uF

R3

47K

M1
2SK1059

M2

2SK1399

FUSE

VCC ( LCD input)

C1

1uF

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANS FORMED TO ANY OTHER FORMS W IT HOUT P ER MISSION FROM Chimei-Innolux.

_

SPEC NO.

PAGE

BT140GW01 V.7

10/29

Note 4: Test condition

(1) Pattern: LED duty 100％

(2) V_LED = 12.0V, V_LED rising time = 470

μs ± 10%

Control signal

(High to low)

90%

10%

(3) Test circuit

21V

V

LED

Ton=470µs±10%

12 V

R1

47K

R2

1K

C2

10000pF

C3

1uF

R3

47K

M1
2SK1059

M2

2SK1399

FUSE

V_LED

C1

1uF

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANS FORMED TO ANY OTHER FORMS W IT HOUT P ER MISSION FROM Chimei-Innolux.

SPEC NO.

PAGE

BT140GW01 V.7

11/29

b. Power sequence

Power sequence timing table

Parameter

Min. Typ. Max.

t

≧0.5 -- ≦10 ms

1

t

≧0 -- ≦50 ms

2

t

≧0 -- -- ms

3

t

≧150 -- -- ms

4

t

≧200 --- -- ms

5

t

≧0 -- -- ms

6

t

≧0 -- ≦10 ms

7

t

≧0.5 -- ≦10 ms

A

t

＞0 -- -- ms

B

t

≧0 -- -- ms

C

t

≧0 -- -- ms

D

t

≧0 -- -- ms

E

t

≧0 -- -- ms

F

Value

Units

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANS FORMED TO ANY OTHER FORMS W IT HOUT P ER MISSION FROM Chimei-Innolux.

c. Display color vs. input data signals

Signal Name Description Remark

SPEC NO.

PAGE

BT140GW01 V.7

12/29

R5 Red Data 5 (MSB)

R4 Red Data 4

R3 Red Data 3

R2 Red Data 2

R1 Red Data 1

R0 Red Data 0 (LSB)

Red-pixel Data

G5 Green Data 5 (MSB)

G4 Green Data 4

G3 Green Data 3

G2 Green Data 2

G1 Green Data 1

G0 Green Data 0 (LSB)

Green-pixel Data

B5 Blue Data 5 (MSB)

B4 Blue Data 4

B3 Blue Data 3

B2 Blue Data 2

Red-pixel data. Each red pixel's brightness data
consists of these 6 bits pixel data.

Green-pixel data. Each green pixel's brightness

data consists of these 6 bits pixel data.

Blue-pixel data. Each blue pixel's brightness data

consists of these 6 bits pixel data.

B1 Blue Data 1

B0 Blue Data 0 (LSB)

Blue-pixel Data

Signal for 1 DCLK cycle (t

)

CLK

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANS FORMED TO ANY OTHER FORMS W IT HOUT P ER MISSION FROM Chimei-Innolux.

d. Input signal timing

Timing table

SPEC NO.

PAGE

BT140GW01 V.7

13/29

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANS FORMED TO ANY OTHER FORMS W IT HOUT P ER MISSION FROM Chimei-Innolux.

SPEC NO.

PAGE

BT140GW01 V.7

14/29

e. Display position

D(1, 1) D(2, 1) …… D(683, 1) …… D(1365, 1) D(1366, 1)

D(1, 2) D(2, 2) …… D(683, 2) …… D(1365, 2) D(1366, 2)

.
.
.

D(1, 384) D(2, 384) …… D(683, 384) …… D(1365, 384) D(1366, 384)

.
.
.

D(1, 767) D(2, 767) …… D(683, 767) …… D(1365, 767) D(1366, 767)

D(1, 768) D(2, 768) …… D(683, 768) …… D(1365, 768) D(1366, 768)

……

……

.
.
.

.
.
.

……

……

.
.
.

.
.
.

.
.
.

.
.
.

f. Backlight driving conditions

Parameter Symbol Min. Typ. Max. Unit Remark

LED Forward Voltage V

LED Forward Current

Power consumption

Input PWM frequency F

3 3.2 3.4 V

F

IF 20 mA

P

3.0 W

LED

100 2000 Hz T = 25°C

PWM

rms

rms

T = 25°C
T = 25°C
T = 25°C

Duty ratio - 1 100 % Note 1

LED life time - 15,000 Hr T = 25°C , Note 2

Note 1: PWM duty ratio linearity guarantees 20~100%
Note 2: LED life time definition is Brightness decrease to 50% of initial or abnormal lighting.

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANS FORMED TO ANY OTHER FORMS W IT HOUT P ER MISSION FROM Chimei-Innolux.

g. Module function block

SPEC NO.

PAGE

BT140GW01 V.7

15/29

LED driver

Timing

controller

LED Light-bar

TFT-LCD

Source driver

Step-up regulator

& reference voltage

generator

LVDS connector

Gate driver

EDID

EEPROM

LVDS DATA BUS mini-LVDS & CONTROL BUS POWER I2C BUS

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANS FORMED TO ANY OTHER FORMS W IT HOUT P ER MISSION FROM Chimei-Innolux.

SPEC NO.

PAGE

BT140GW01 V.7

16/29

3. Optical specifications

Ambient temperature = 25°C

Item Symbol Condition

Specification

Min. Typ. Max.

Unit Remark

Response time

Contrast ratio CR

Viewing angle

Brightness

(5 points average)

Color chromaticity (CIE)

Tr+Tf θ= 0°

Top

Bottom

θ= 0°

CR≧10
CR≧10

500 600 Note 2,4

15

30

8 16 ms Note 3

deg Note 2,4,6

Left

Right

190 220 nit Note 2,5

Y

L

Wx

Wy

Rx

Ry

Gx

Gy

CR≧10
CR≧10

θ= 0°

40

40

0.313

0.329

0.58

0.353

-0.03

+0.03

0.32

0.577

Note 2

Bx

B

y

0.165

0.14

Color Gamut NTSC CIE1931 45 % -

δ

0.8

W(5)

White uniformity

0.6

δ

W(13)

Cross talk Ct 2% Note 8

Note 1: To be measured in dark room.

Note 2: To be measured with a viewing cone of 2°by Topcon luminance meter BM-5A.

Note 3: Definition of response time:

The output signals of BM-7 are measured when the input signals are changed from “Black” to
“White” (falling time) and from “White” to “Black” (rising time), respectively. The response time

interval is between 10% and 90% of amplitudes. Refer to figure as below.

Note 2,7

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANS FORMED TO ANY OTHER FORMS W IT HOUT P ER MISSION FROM Chimei-Innolux.

(

Avg

)

SPEC NO.

PAGE

BT140GW01 V.7

17/29

100%

S
i

90%

g
n
a
l

(

R
e

l

a
t

i

v
e

v
a
l

u

10%

e
)

0%

Tr

Note 4: Definition of contrast ratio:

Contrast ratio is calculated with the following formula:

Contrast ratio

of 5pts

=

Note 5: Driving current for LED should be 20 mA.

Luminance is measured at the following thirteen points (1~13):

Y

= (Y5+ Y10+Y11+Y12 +Y13) / 5

L

Note 6: Definition of viewing angle

"Black"

L white (Avg of 5pts.)
L

Black (Avg of 5pts.)

"White""White"

Tf

Note 7: Definition white uniformity

Luminance is measured at the following thirteen points (1~13):

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANS FORMED TO ANY OTHER FORMS W IT HOUT P ER MISSION FROM Chimei-Innolux.

δ

Minimum brightness of thirteen points

W(13) =

δ

W(5) =

Maximum brightness of thirteen points

Minimum brightness of five points

Maximum brightness of five points

SPEC NO.

PAGE

BT140GW01 V.7

18/29

13 point measuring locations refer to the point 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 and 13.

5 point measuring locations refer to the point 5, 10, 11, 12 and 13.

Note 8:

1/2

1/6

A

B

32 gray level 32 gray level

Unit: percentage of dimension of display area

1/6

1/2

2/3 1/3

1/2

A’

1/6

1/6

1/3

1/2

B’

2/3

0 gray level

l L

l L

l / LA x 100%= 2% max., LA and L

A-LA’

l / LB x 100%= 2% max., LB’ and LB’ are brightness at location B and B’

B-LB’

are brightness at location A and A’

A’

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANS FORMED TO ANY OTHER FORMS W IT HOUT P ER MISSION FROM Chimei-Innolux.

SPEC NO.

PAGE

BT140GW01 V.7

19/29

4. Reliability test items

Test Item Test Condition Judgment Remark

High temperature storage

Low temperature storage

High temperature & high
humidity operation

High temperature operation

Low temperature operation

Thermal Shock
(Non-operation)

Electrostatic discharge (ESD)

Vibration
(Non-operation)

Mechanical shock
(Non-operation)

Note 1: Pass: Normal display image with no obvious non-uniformity and no line defect.

Fail: No display image, obvious non-uniformity, or line defects.

Partial transformation of the module parts should be ignored.

Note 2: Evaluation should be tested after storage at room temperature for more than one hour.

60°C, 240 hours

-20°C, 240 hours

40°C, 90% RH, 240 hours

(No condensation)

50°C, 240 hours

0°C, 240 hours

-25°C / 30 mins ~ 65°C / 30 mins

100 cycles

150 pF, 330Ω,
Contact: ±8kV, Air: ±15kV

1.5G, 10 to 500 Hz random; 0.5hr in each
perpendicular axes ( X, Y, Z ).

220G/2ms, Half sine wave, ±X, ±Y, ±Z one
time for each direction

Note 1 Note 2

Note 1 Note 2

Note 1 Note 2

Note 1 Note 2

Note 1 Note 2

Note 1 Note 2

Note 1

Note 1 Note 2

Note 1 Note 2

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANS FORMED TO ANY OTHER FORMS W IT HOUT P ER MISSION FROM Chimei-Innolux.

SPEC NO.

PAGE

BT140GW01 V.7

20/29

5. Safety

5-1. Sharp edge requirements

There will be no sharp edges or corners on the display assembly that could cause injury.

5-2. Materials

a. Toxicity

There will be no carcinogenic materials used anywhere in the display module. If toxic materials are

used, they will be reviewed and approved by the responsible InnoLux Toxicologist.

b. Flammability

All components including electrical components that do not meet the flammability grade UL94-V0 in the

module will complete the flammability rating exception approval process. The printed circuit board will

be made from material rated 94-V0 or better. The actual UL flammability rating will be printed on the

printed circuit board.

c. Capacitors

If any polarized capacitors are used in the display assembly, provisions will be made to keep them from

being inserted backwards.

6. Display quality

The display quality of the color TFT-LCD module should be in compliance with the InnoLux
incoming inspection standard.

7. Handling precaution

(1) Do not apply rough force such as bending or twisting to the module during assembly.
(2) To assemble or install module into user’s system can be only in clean working areas. The

dust and oil may cause electrical short or worsen the polarizer.

(3) It’s not permitted to have pressure or impulse on the module because the LCD panel and

backlight will be damaged.

(4) Always follow the correct power sequence when LCD module is connecting and operating.

(5) Do not pull the I/F connector in or out while the module is operating.
(6) Do not disassemble the module.

(7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft

and easily scratched.

(8) It is dangerous that moisture come into or contacted the LCD module, because moisture may

damage LCD module when it is operating.

(9) High temperature or humidity may reduce the performance of module. Please store LCD

module within the specified storage conditions.

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANS FORMED TO ANY OTHER FORMS W IT HOUT P ER MISSION FROM Chimei-Innolux.

SPEC NO.

PAGE

BT140GW01 V.7

21/29

8. Label Definition

8-1. Module label

BT140GW01 V.7
AB1400001 70X

X X X X X X X Y M D L N N N N

Z1 Z2 –Z3 Z4 Z5 Z6 Z7 –Z8– Z9 –Z10 –Z11 Z12– Z13–Z14 Z15– Z16– Z17 Z18 Z19–Z20 Z21 Z22 Z

23

23mm

73mm

(a) Model Number : BT140GW01 V.7
(b) Product Number : AB140000170X

(c) Serial ID: X X X X X X X Y M D L N N N N

Serial No.

Product stroke

Year, Month, Date

CMI Internal Use

Revision

CMI Internal Use

(d) Production Location: MADE IN XXXX.

(e) UL/CB logo: “XXXX” especially stands for panel manufactured by CMI Ningbo satisfying UL/CB requirement.

“LEOO” “CANO” is the CMI’s UL factory code for Ningbo factory.

Serial ID II (INL Internal Use):

Z1 Z2 –Z3 Z4 Z5 Z6 Z7 –Z8– Z9 –Z10 –Z11 Z12– Z13–Z14 Z15– Z16– Z17 Z18 Z19–Z20 Z21 Z22 Z

23

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANS FORMED TO ANY OTHER FORMS W IT HOUT P ER MISSION FROM Chimei-Innolux.

8-2. Carton label

M

BOX ID:

Model No. BT140GW01 V.7 AB1400001 70X
Quantity: XX PCS
MFG Date: XXXX/XX/XX
QC:

INNOLUX DISPLAY

X X X X X X X Y M D L N N N

90.5mm

55mm

SPEC NO.

PAGE

BT140GW01 V.7

22/29

20mm

53.5mm

MADE IN CHINA

(1) Model No. : BT140GW01
(2) Version: V.7
(3) Package Quantity :XXPCS

(c) Serial ID: X X X X X X X Y M D L N N N

Serial No.

Product stroke

Year, Month, Date

CMI Internal Use

Revision

CMI Internal Use

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANS FORMED TO ANY OTHER FORMS W IT HOUT P ER MISSION FROM Chimei-Innolux.

p

r

9. Packing Form

Lowe

SPEC NO.

PAGE

25 pcs

Cushion

BT140GW01 V.7

23/29

Carton

Step E

F

Ste

Upper Cushion

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANS FORMED TO ANY OTHER FORMS W IT HOUT P ER MISSION FROM Chimei-Innolux.

SPEC NO.

PAGE

BT140GW01 V.7

24/29

10. Mechanical Drawings

10-1 Front Side

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANS FORMED TO ANY OTHER FORMS W IT HOUT P ER MISSION FROM Chimei-Innolux.

Z20Z21

A

Z22 Z2 3

SPEC NO.

PAGE

BT140GW01 V.7

25/29

10-2 Rear side

BT140G W0X V.X 8YBXXXXX-XX

INL SN: Z1Z2Z3Z4-Z5-Z6-Z7Z8Z9-Z10Z11-Z12Z13Z14Z15-Z16-Z1-7Z18Z19

Z1 Z2 Z3 Z4 Z5 Z6 –Z7 – Z8 Z9 Z10 Z1 1 Z12

B1400001 70X

BT140GW01 V.7

Z1 Z2 –Z3 Z4 Z5 Z6 Z7 – Z8– Z9 –Z1 0 –Z11 Z12 – Z13–Z1 4 Z15– Z1 6– Z17 Z1 8 Z19–Z2 0 Z21

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANS FORMED TO ANY OTHER FORMS W IT HOUT P ER MISSION FROM Chimei-Innolux.

SPEC NO.

PAGE

BT140GW01 V.7

26/29

11: EDID Code

Byte

(Dec)

0
1
2
3
4

Byte

(Hex)

00
01
02
03
04

Header
Header
Header
Header
Header

Header

5
6
7
8
9

10
11
12
13
14

Version

15
16
17
18

Vendor / Product EDID

19
20
21
22
23

Display

Parameters

24

25
26
27
28
29
30
31
32
33

Panel Color Coordinates

34

Header

05

Header

06

Header

07

EISA manufacture code ( 3 Character ID ) " LEN"

08

EISA manufacture code (Compressed ASCⅡ)

09

Panel Supplier Reserved - Product Code "14" 16:9 HD 1366x768 LED B/L"

0A

Panel Supplier Reserved - Product Code

0B

ID Serial Number (32-bit serial number)

0C

ID Serial Number (32-bit serial number)

0D

ID Serial Number (32-bit serial number)

0E

ID Serial Number (32-bit serial number)

0F

Week of Manufacture 00 weeks

10

Year of Manufacture 2010 years

11

EDID structure version # = 1

12

EDID revision # = 3

13

Video input Definition = Digital signal

14

Max H image size (Rounded cm) = 31 cm

15

Max V image size (Rounded cm) = 18 cm

16

Display gamma = (gamma*100)-100 = Example:(2.2*100)-100=120 = 2.2 Gamma

17

Feature Support (Standby,Suspend,Active Off/Very Low Power, RGB color

18

display,Preferred Timing Mode)
Red/Green Low Bits (RxRy/GxGy)

19

Blue/White Low Bits (BxBy/WxWy)

1A

Red X Rx = 0.580

1B

Red Y Ry = 0.340

1C

Green X Gx = 0.310

1D

Green Y Gy = 0.548

1E

Blue X Bx = 0.155

1F

Blue Y By = 0.155

20

White X Wx = 0.313

21

White Y Wy = 0.329

22

Field Name and Comments

Value
(Hex)

00
FF
FF
FF
FF
FF
FF

00

30

AE

A0

40

00

00

00

00

00

14

01

03

80
1F

12

78

EA

87
F5

94

57
4F
8C

27

27

50

54

Value

(Bin)

00000000
11111111
11111111
11111111
11111111
11111111
11111111
00000000
00110000
10101110
10100000
01000000
00000000
00000000
00000000
00000000
00000000
00010100
00000001
00000011
10000000
00011111
00010010
01111000

11101010

10000111
11110101
10010100
01010111
01001111
10001100
00100111
00100111
01010000
01010100

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANS FORMED TO ANY OTHER FORMS W IT HOUT P ER MISSION FROM Chimei-Innolux.

SPEC NO.

PAGE

BT140GW01 V.7

27/29

35

36

Timings

37

Established

38
39
40
41
42
43
44
45
46
47
48

Standard Timing ID

49
50
51
52
53
54
55
56
57
58

59
60

61
62
63
64
65

Timing Descriptor #1

66
67
68
69
70

71

Established timing 1 (00h if not used)

23

Established timing 2 (00h if not used)

24

Manufacturer's timings (00h if not used)

25

Standard timing ID1 (01h if not used)

26

Standard timing ID1 (01h if not used)

27

Standard timing ID2 (01h if not used)

28

Standard timing ID2 (01h if not used)

29

Standard timing ID3 (01h if not used)

2A

Standard timing ID3 (01h if not used)

2B

Standard timing ID4 (01h if not used)

2C

Standard timing ID4 (01h if not used)

2D

Standard timing ID5 (01h if not used)

2E

Standard timing ID5 (01h if not used)

2F

Standard timing ID6 (01h if not used)

30

Standard timing ID6 (01h if not used)

31

Standard timing ID7 (01h if not used)

32

Standard timing ID7 (01h if not used)

33

Standard timing ID8 (01h if not used)

34

Standard timing ID8 (01h if not used)

35

Pixel Clock/10,000 (LSB) 69.3 MHz @ 60Hz

36

Pixel Clock/10,000 (MSB)

37

Horizontal Active (lower 8 bits) 1366 Pixels

38

Horizontal Blanking(Thp-HA) (lower 8 bits) 100 Pixels

39

Horizontal Active / Horizontal Blanking(Thp-HA) (upper 4:4bits)

3A

Vertical Avtive

3B

768 Lines
Vertical Blanking (Tvp-HA) (DE Blanking typ.for DE only panels) 20 Lines

3C

Vertical Active : Vertical Blanking (Tvp-HA) (upper 4:4bits)

3D

Horizontal Sync. Offset (Thfp) 48 Pixels

3E

Horizontal Sync Pulse Width (HSPW) 32 Pixels

3F

Vertical Sync Offset(Tvfp) : Sync Width (VSPW) 1 Lines : 4 Lines

40

Horizontal Vertical Sync Offset/Width (upper 2bits)

41

Horizontal Image Size (mm) 309 mm

42

Vertical Image Size (mm) 174 mm

43

Horizontal Image Size / Vertical Image Size

44

Horizontal Border = 0 (Zero for Notebook LCD)

45

Vertical Border = 0 (Zero for Notebook LCD)

46

Non-Interlace, Normal display, no stereo, Digital Separate ( Non-interlaced,Normal

47

display,no stereo,Vertical Polarity Negative,Horizontal Polarity Negative)

00

00

00

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

12
1B

56

64

50

00

14

30

30

20

14

00

35

AE

10

00

00

18

00000000

00000000

00000000

00000001
00000001
00000001
00000001
00000001
00000001
00000001
00000001
00000001
00000001
00000001
00000001
00000001
00000001
00000001
00000001
00010010
00011011
01010110
01100100
01010000

00000000

00010100
00110000
00110000
00100000
00010100
00000000
00110101
10101110
00010000
00000000
00000000

00011000

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANS FORMED TO ANY OTHER FORMS W IT HOUT P ER MISSION FROM Chimei-Innolux.

72
73
74
75
76
77
78
79
80
81
82
83
84

Timing Descriptor #2

85
86
87
88

89

90
91
92
93
94
95
96
97
98

99
100
101

Timing Descriptor #3

102
103
104
105
106
107

Pixel Clock/10,000 (LSB) 60.44 MHz @ 50Hz

48

Pixel Clock/10,000 (MSB)

49

Horizontal Active (lower 8 bits) 1366 Pixels

4A

Horizontal Blanking(Thp-HA) (lower 8 bits) 177 Pixels

4B

Horizontal Active / Horizontal Blanking(Thp-HA) (upper 4:4bits)

4C

Vertical Avtive 768 Lines

4D

Vertical Blanking (Tvp-HA) (DE Blanking typ.for DE only panels) 20 Lines

4E

Vertical Active : Vertical Blanking (Tvp-HA) (upper 4:4bits)

4F

Horizontal Sync. Offset (Thfp) 48 Pixels

50

Horizontal Sync Pulse Width (HSPW) 32 Pixels

51

Vertical Sync Offset(Tvfp) : Sync Width (VSPW) 1 Lines : 4 Lines

52

Horizontal Vertical Sync Offset/Width (upper 2bits)

53

Horizontal Image Size (mm) 309 mm

54

Vertical Image Size (mm) 174 mm

55

Horizontal Image Size / Vertical Image Size

56

Horizontal Border = 0 (Zero for Notebook LCD)

57

Vertical Border = 0 (Zero for Notebook LCD)

58

Non-Interlace, Normal display, no stereo, Digital Separate ( Non-interlaced,Normal

59

display,no stereo,Vertical Polarity Negative,Horizontal Polarity Negative)
Flag

5A

Flag

5B

Flag

5C

Data Type Tag ( ASCII String )

5D

Flag

5E

(Horizontal active pixel / 8) - 31 "1368"

5F

Image Aspect Ratio "16 : 9"

60

Middle Refresh Rate "50Hz"

61

(Horizontal active pixel / 8) - 31 "1368"

62

Image Aspect Ratio "16 : 9"

63

Low Refresh Rate "40Hz"

64

Brightness (1/10nit)

65

Feature flag " TN, White LED Backlight "

66

Reserved

67

LCD Supplier manufacture Code (3 character ID) "INL"

68

LCD Supplier manufacture Code (3 character ID)

69

LCD Supplier Product code

6A

LCD Supplier Product code

6B

SPEC NO.

PAGE

BT140GW01 V.7

28/29

9C

17
56

A8

50
00
14
30
30
20
14
00
35

AE

10
00
00

18
00

00
00
00
00

8C

09
32

8C

09
28
16
09
00
25

CC

00
00

10011100
00010111
01010110
10101000
01010000
00000000
00010100
00110000
00110000
00100000
00010100
00000000
00110101
10101110
00010000
00000000
00000000

00011000

00000000
00000000
00000000
00000000
00000000
10001100
00001001
00110010
10001100
00001001
00101000
00010110
00001001
00000000
00100101
11001100
00000000
00000000

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANS FORMED TO ANY OTHER FORMS W IT HOUT P ER MISSION FROM Chimei-Innolux.

SPEC NO.

PAGE

BT140GW01 V.7

29/29

108
109
110
111
112
113
114
115
116
117
118
119

Timing Descriptor #4

120
121
122
123
124
125
126

Flag

6C

Flag

6D

Flag

6E

Data Type Tag ( Monitor Name, stored as ASCII )

6F

Flag

70

Model Name, stored as ASCII "B"

71

Model Name, stored as ASCII "T"

72

Model Name, stored as ASCII "1"

73

Model Name, stored as ASCII "4"

74

Model Name, stored as ASCII "0"

75

Model Name, stored as ASCII "G"

76

Model Name, stored as ASCII "W"

77

Model Name, stored as ASCII "0"

78

Model Name, stored as ASCII "1"

79

Model Name, stored as ASCII "V"

7A

Model Name, stored as ASCII "7"

7B

Model Name, stored as ASCII

7C

Model Name, stored as ASCII

7D

Extension flag (# of optional 128 panel ID extension block to follow, Typ = 0)

7E

00
00
00

FE

00
42
54
31
34
30
47
57
30
31
56
37

0A

20
00

00000000
00000000
00000000
11111110
00000000
01000010
01010100
00110001
00110100
00110000
01000111
01010111
00110000
00110001
01010110
00110111
00001010
00100000
00000000

127

Check Sum (The 1-byte sum of all 128 bytes in this panel ID block shall = 0)

7F

C8

11001000

Checksum

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANS FORMED TO ANY OTHER FORMS W IT HOUT P ER MISSION FROM Chimei-Innolux.