INNOLUX BT101IW04-V0 SPECIFICATION

INNOLUX DISPLAY CORPORATION

BT101IW04 V.0 LCD MODULE SPECIFICATION

(● ) Preliminary Specification ( ) Final Specification

Customer Checked & Approved by

Dell

Approved by Checked by Prepared by

MKT PD PM

www.jxlcd.com

Innolux Display Corporation

No.160 Kesyue Rd., Chu-Nan Site, Hsinchu Science Park,

Chu-Nan 350, Miao-Li County, Taiwan

Annie Lu

Date: 2010/01/16

Tel: 886-37-586000 Fax: 886-37-586060

Version: 0.1

y

Record of Revision

Version Revise Date Page Content

0.0 2009/10/22 All First edition issued

Timing table: Clock freq. 58.6MHz (Typ.)→57.5MHz

11

LED power consumption: 1.38W (Typ.)→1.81W

12

Line cycle time 1507tclk (Typ.)→1478tclk

1.58W (Max.)→1.92W

0.1 2010/01/16

www.jxlcd.com

Color chromaticity:

13

20 Packing Form update

23 EDID code: X20

Rx 0.580, Ry 0.340

Gx 0.310, Gy 0.550

Bx 0.155, B

0.155

Contents: Page

SPEC NO.

PAGE

BT101IW04 V.0

1/ 26

1 . General Specifications

2 . Electrical Specifications 2-1 Pin Assignment 2-2 Absolute Maximum Ratings

2-3 Electrical Characteristics

3 . Optical Specifications

4. Reliability Test Items

5. Safety

6. Display Quality

7. Handling Precaution

8. Label Definition

2

3 5 6

12

15

16

17

9. Packing Form

10. Mechanical Drawings

Appendix

www.jxlcd.com

19

21

23

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM INNOLUX DISPLAY CORPORATION.

1. General Specifications

No. Item Specification Unit

1 Display resolution (pixel) 1024 (H) x 600 (V), WSVGA resolution

2 Active area 222.72 (H) x 125.28 (V) mm

3 Screen size 10.1 inches diagonal Inches

4 Pixel pitch 217.5 (H) x 208.8 (V) um

5 Color configuration R, G, B vertical stripe

6 Overall dimension 249.3 (H) x 147(V) x 3.6 (D) (max) mm

7 Weight 180 Max. Grams

8 Surface treatment Anti-glare

SPEC NO.

PAGE

BT101IW04 V.0

2/ 26

9 Input color signal 6 bit LVDS

10 Display colors 262K (6 bit)

11 Optimum viewing direction 6 o’clock

12 Backlight W-LED

13 RoHS RoHS compliance

www.jxlcd.com

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM INNOLUX DISPLAY CORPORATION.

2. Electrical Specifications

2-1 Pin Assignment

a. Panel connector

Connector Part No.: 20455-040-12 (I-PEX) or equivalent

User’s connector Part No: 20453-040T-12 (I-PEX) or equivalent

PIN NO Symbol Function Remark

1 DIAG_LOOP Plug detection pin 2 VCC Power Supply (+3.3V) 3 VCC Power Supply (+3.3V) 4 V 5 BIST BIST function enable (+3.3V) 6 Clk 7 DATA 8 Rxin0- Differential data input 9 Rxin0+ Differential data input

10 GND Ground

11 Rxin1- Differential data input 12 Rxin1+ Differential data input 13 GND Ground 14 Rxin2- Differential data input 15 Rxin2+ Differential data input 16 GND Ground 17 CLK- Differential clock input 18 CLK+ Differential clock input 19 NC No connection (Reserve) 20 NC No connection (Reserve) 21 NC No connection (Reserve) 22 NC No connection (Reserve) 23 NC No connection (Reserve) 24 NC No connection (Reserve)

25 NC No connection (Reserve)

26 NC No connection (Reserve) 27 NC No connection (Reserve) 28 NC No connection (Reserve) 29 NC No connection (Reserve) 30 NC No connection (Reserve) 31 LED_GND LED Ground 32 LED_GND LED Ground 33 LED_GND LED Ground 34 DIAG_LOOP Plug detection pin 35 LED_PWM PWM dimming signal input 36 LED_EN LED enable pin (3.3V) 37 NC No connection (Reserve)

38 V_LED LED power supply 7.5V~21V

39 V_LED LED power supply 7.5V~21V

www.jxlcd.com

DDC Power +3.3V

EDID

DDC Clock

EDID

DDC Data

EDID

SPEC NO.

PAGE

BT101IW04 V.0

3/ 26

R0~R5,G0

G1~G5,B0,B1

B2~B5,DE,Hsync,Vsync

40 V_LED LED power supply 7.5V~21V

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM INNOLUX DISPLAY CORPORATION.

b. General Block Diagram

www.jxlcd.com

SPEC NO.

PAGE

BT101IW04 V.0

4/ 26

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM INNOLUX DISPLAY CORPORATION.

V

2-2. Absolute Maximum Ratings

SPEC NO.

PAGE

BT101IW04 V.0

5/ 26

Parameter Symbol

Min. Max.

Power input voltage VCC - 0.3 4.0 V At 25°C

Input signal voltage VIN - 0.3 4.0 V At 25°C

LED input voltage V

Operating temperature Top 0 50 °C Note 1

Storage temperature TST - 20 60 °C Note 2

Re-screw - 5 Times

Assured torque at side mount - 2 kgf.cm

Note 1: The relative humidity must not exceed 90%, non-condensing at temperatures of 40°C or

less. At temperatures greater than 40°C, the wet bulb temperature must not exceed 39°C.

Note 2: The unit should not be exposed to corrosive chemicals.

Relative Humidity (%RH)

www.jxlcd.com

-40 -20 0 2 0 40 60 80

100

90 80 70 60 50 40 30 20 10

0

LED

Operation Range

Storage Range

Temperature (°C)

- 0.3 30 V

alues

Unit

Remark

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM INNOLUX DISPLAY CORPORATION.

2-3. Electrical Characteristics

a. Typical operating conditions

Item Symbol Min. Typ. Max. Unit Remark

Power input voltage VCC 3 3.3 3.6 V

SPEC NO.

PAGE

BT101IW04 V.0

6/ 26

Permissive power input ripple

Power input current ICC 220 250 mA Note 1

Power consumption Pc 0.73 0.83 Watts Note 1

Differential input high

threshold voltage

Differential input low

LVDS

interface

Note 1: The specified input current and power consumption are under the V

Note 2: LVDS waveform diagram

Rxin+/CLK+

Rxin-/CLK-

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM INNOLUX DISPLAY CORPORATION.

threshold voltage

Common input voltage

Terminating resistor

Rush current

LED rush current

www.jxlcd.com

f

=60Hz (frame frequency) condition whereas black pattern is displayed.

V

0.1 V

RF

V

+100 mV

LVT H

V

-100 mV

LVT L

V

1.0 1.2 1.4 V Note 2

LVC

R

90 100 110 ohm

T

I

- - 1 A Note 3

Rush

I

LED-Rush

- - 1.5 A Note 4

=3.3 V, 25 °C,

cc

V

LVC

GND

V

LVC

Note 2

V

LVC

Note 2

V

LVT H

V

LVT L

=1.2V,

SPEC NO.

PAGE

BT101IW04 V.0

7/ 26

Note 3: Test condition

(1) Pattern: Black pattern

(2) V

= 3.3 V, VCC rising time = 470 μs ± 10%

CC

Control signal

(High to low)

90%

10%

V

CC

Ton=470µs±10%

(3) Test circuit

3.3 V

R1

47K

www.jxlcd.com

12V

C3

1uF

R2

1K

R3

47K

M1 2SK1059

C2

10000pF

M2

2SK1399

FUSE

C1

1uF

VCC ( LCD input)

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM INNOLUX DISPLAY CORPORATION.

_

SPEC NO.

PAGE

BT101IW04 V.0

8/ 26

Note 4: Test condition

(1) LED duty 100％

(2) V_LED = 12.0V, V_LED rising time = 470

μs ± 10%

Control signal

(High to low)

90%

10%

V

LED

Ton=470µs±10%

(3) Test circuit

12 V

R1

47K

www.jxlcd.com

21V

C3

1uF

R2

1K

R3

47K

M1 2SK1059

C2

10000pF

M2

2SK1399

FUSE

C1

1uF

V_LED

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM INNOLUX DISPLAY CORPORATION.

SPEC NO.

PAGE

BT101IW04 V.0

9/ 26

b. Power sequence

Power supply for LCD, VCC

Interface data signal, V

(LVDS signal of transmitter)

Backlight on/off

Power sequence timing table

Parameter

90%

10%

0V

T

1

Value

2

Valid Data

T

3

T

Backlight

On

i

0V

OFF OFF

Min. Typ. Max.

90%

10%

T

T6

T

5

4

7

Units

T1 0.5 - 10 ms

T2 0 - 50 ms

T3 200 - - ms

www.jxlcd.com

T4 200 - - ms

www.jxlcd.com

T5 0 - 50 ms

T6 0 - 10 ms

T7 400 - - ms

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM INNOLUX DISPLAY CORPORATION.

c. Display color vs. input data signals

Signal Name Description Remark

R5 Red Data 5 (MSB)

R4 Red Data 4

R3 Red Data 3

R2 Red Data 2

R1 Red Data 1

R0 Red Data 0 (LSB)

Red-pixel Data

G5 Green Data 5 (MSB)

G4 Green Data 4

G3 Green Data 3

G2 Green Data 2

Red-pixel data. Each red pixel's brightness data

consists of these 6 bits pixel data.

Green-pixel data. Each green pixel's brightness

data consists of these 6 bits pixel data.

SPEC NO.

PAGE

BT101IW04 V.0

10/ 26

G1 Green Data 1

G0 Green Data 0 (LSB)

Green-pixel Data

B5 Blue Data 5 (MSB)

B4 Blue Data 4

B3 Blue Data 3

B2 Blue Data 2

B1 Blue Data 1

www.jxlcd.com

B0 Blue Data 0 (LSB)

Blue-pixel Data

Signal for 1 DCLK cycle (t

Blue-pixel data. Each blue pixel's brightness data consists of these 6 bits pixel data.

)

CLK

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM INNOLUX DISPLAY CORPORATION.

d. Input signal timing

Timing table

Description Symbol Min Typ Max Unit

Frame rate -- -- 60 -- Hz

SPEC NO.

PAGE

BT101IW04 V.0

11/ 26

Clock freq. 1/t

Line cycle time tH (1054) 1478 (1400)

Line width-active tHd -- 1024 --

Frame cycle time tV (610) 648 (654) tH

V width-active tVd -- 600 -- tH

DE

www.jxlcd.com

DE

www.jxlcd.com

t

CLK

(40) 57.5 (59) MHz

CLK

t

V

t

Vd

t

H

t

Hd

t

CLK

DCLK

e. Display position

D(1, 1) D(2, 1) …… D(673, 1) …… D(1023, 1) D(1024, 1)

D(1, 2) D(2, 2) …… D(673, 2) …… D(1023, 2) D(1024, 2)

. . .

D(1, 384) D(2, 300) …… D(673, 384) …… D(1023, 300) D(1024, 300)

. . .

D(1, 767) D(2, 599) …… D(673, 599) …… D(1023, 599) D(1024, 599)

D(1, 768) D(2, 600) …… D(673, 600) …… D(1023, 600) D(1024, 600)

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM INNOLUX DISPLAY CORPORATION.

……

. . .

……

. . .

f. Backlight driving conditions

Parameter Symbol Min. Typ. Max. Unit Remark

SPEC NO.

PAGE

BT101IW04 V.0

12/ 26

LED forward voltage V

LED forward current

LED power consumption

Output PWM frequency F

Duty ratio - 5 100 % Note 1

LED life time (LED only) - 15,000 Hr T = 25°C , Note 2

Note 1: PWM duty ratio linearity guarantees 20~100% Note 2: LED life time definition is Brightness decrease to 50% of initial or abnormal lighting.

g. Module function block

www.jxlcd.com

LED driver

Timing

controller

3 3.2 3.4 V

F

IF 20 mA

P

1.81 1.92 W

LED

200 2000 Hz T = 25°C

PWM

LED Light-bar

TFT-LCD

Source driver

Step-up regulator

& reference voltage

generator

LVDS connector

EEPROM

rms

EDID

Gate driver

LVDS DATA BUS mini-LVDS & CONTROL BUS POWER I2C BUS

T = 25°C

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM INNOLUX DISPLAY CORPORATION.

SPEC NO.

PAGE

BT101IW04 V.0

13/ 26

3. Optical specifications

Ambient temperature = 25℃

Item Symbol Condition

Response time

Contrast ratio CR

Viewing angle

Brightness

(5 points average)

Color chromaticity (CIE)

Specification

Min. Typ. Max.

Tr+Tf θ= 0∘

θ= 0∘

Top 15

Bottom 30

CR≧10

Left 40

Right

Y

170 200 nit Note 2,5

L

Wx

Wy

Rx

Ry

Gx

θ= 0∘

400 500 Note 2,4

40

-0.03

8 16 ms Note 3

0.313

0.329

0.580

0.340 +0.03

0.310

Unit Remark

deg Note 2,4,6

Note 2

Gy

www.jxlcd.com

Color Gamut NTSC CIE1931 40 45 % -

White uniformity

Cross talk Ct 2% Note 8

Note 1: To be measured in dark room.

Note 2: To be measured with a viewing cone of 2° by Topcon luminance meter BM-5A.

Note 3: Definition of response time:

The output signals of BM-7 are measured when the input signals are changed from “Black” to “White” (falling time) and from “White” to “Black” (rising time), respectively. The response time

interval is between 10% and 90% of amplitudes. Refer to figure as below.

Bx

B

y

δ

0.8

W (5)

0.65

δ

W (13)

0.550

0.155

Note 2,7

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM INNOLUX DISPLAY CORPORATION.

(

Avg

)

SPEC NO.

PAGE

BT101IW04 V.0

14/ 26

100%

S i

90%

g n a l

(

R e

l

a t

i

v e

v a l

u

10%

e )

0%

Note 4: Definition of contrast ratio:

Contrast ratio is calculated with the following formula:

Note 5: Driving current for LED should be 20 mA.

Note 6: Definition of viewing angle

Contrast ratio

Luminance are measured at the following thirteen points (1~13):

= (Y5+Y10+Y11+Y12+Y13) / 5

Y

L

Tr

of 5pts

L white (Avg of 5pts.)

=

L

"Black"

Black (Avg of 5pts.)

"White""White"

Tf

www.jxlcd.com

Note 7: Definition white uniformity:

Luminance is measured at the following thirteen points (1~13):

δ

Minimum Brightness of thirteen points

W(13) =

Maximum Brightness of thirteen points

W(5) =

Minimum Brightness of five points

Maximum Brightness of five points

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM INNOLUX DISPLAY CORPORATION.

13 point measuring locations refer to the point 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 and 13.

5 point measuring locations refer to the point 3, 5, 7, 11 and 12.

SPEC NO.

PAGE

BT101IW04 V.0

15/ 26

Note 8:

32 gray level 32 gray level

Unit: percentage of dimension of display area

l L

1/2

A

www.jxlcd.com

l / LA x 100%= 2% max., LA and L

A-LA’

l / LB x 100%= 2% max., LB’ and LB’ are brightness at location B and B’

B-LB’

B

1/6

1/2

2/3 1/3

are brightness at location A and A’

A’

1/2

A’

0 gray level

1/6

1/3

1/2

B’

2/3

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM INNOLUX DISPLAY CORPORATION.

4. Reliability test items

Test Item Test Condition Judgment Remark

SPEC NO.

PAGE

BT101IW04 V.0

16/ 26

High temperature storage

Low temperature storage

High temperature & high

humidity operation

High temperature operation 50°C, 240 hours Note 1 Note 2

Low temperature operation 0°C, 240 hours Note 1 Note 2

Thermal Shock

(Non-operation)

Electrostatic discharge (ESD)

Vibration

(Non-operation)

Mechanical shock

(Non-operation)

60°C, 240 hours

-20°C, 240 hours

40°C, 90% RH, 240 hours

(No condensation)

-25°C / 30 mins ~ 65°C / 30 mins

100 cycles

150 pF, 330Ω,

Contact: ±8kV, Air: ±15kV

1.5Grms, (PSD: 0.0046^G/Hz) 10 to 500

Hz random; 0.5hr for each perpendicular

220G/2ms, Half sine wave, ±X, ±Y, ±Z one

time for each direction

Note 1 Note 2

Note 1

Note 1 Note 2

Note 1: Pass: Normal display image with no obvious non-uniformity and no line defect.

Fail: No display image, obvious non-uniformity, or line defects.

Note 2: Evaluation should be tested after storage at room temperature more than one hour.

www.jxlcd.com

Partial transformation of the module parts should be ignored.

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM INNOLUX DISPLAY CORPORATION.

5. Safety

5-1. Sharp edge requirements

There will be no sharp edges or corners on the display assembly that could cause injury.

5-2. Materials

a. Toxicity

There will be no carcinogenic materials used anywhere in the display module. If toxic materials

are used, they will be reviewed and approved by the responsible InnoLux Toxicologist.

b. Flammability

All components including electrical components that do not meet the flammability grade UL94-V0

in the module will complete the flammability rating exception approval process. The printed circuit

board will be made from material rated 94-V0 or better. The actual UL flammability rating will be

printed on the printed circuit board.

SPEC NO.

PAGE

BT101IW04 V.0

17/ 26

c. Capacitors

If any polarized capacitors are used in the display assembly, provisions will be made to keep

them from being inserted backwards.

6. Display quality

The display quality of the color TFT-LCD module should be in compliance with the InnoLux incoming

inspection standard.

7. Handling precaution

(1) Do not apply rough force such as bending or twisting to the module during assembly.

(2) To assemble or install module into user’s system can be only in clean working areas. The dust and

oil may cause electrical short or worsen the polarizer.

(3) It’s not permitted to have pressure or impulse on the module because the LCD panel and Backlight

will be damaged.

(4) Always follow the correct power sequence when LCD module is connecting and operating.

(5) Do not pull the I/F connector in or out while the module is operating.

(6) Do not disassemble the module.

(7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and

www.jxlcd.com

easily scratched.

(8) It is dangerous that moisture come into or contacted the LCD module, because moisture may

damage LCD module when it is operating.

(9) High temperature or humidity may reduce the performance of module. Please store LCD module

within the specified storage conditions.

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM INNOLUX DISPLAY CORPORATION.

SPEC NO.

PAGE

BT101IW04 V.0

18/ 26

8. Label Definition

8-1. Module label

(a) Model Number : BT101IW04 V.0 (b) Product Number : AB156000400X (c) Serial ID I : Z

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM INNOLUX DISPLAY CORPORATION.

BT101IW04 V.0 AB1010004 00X

18 mm

www.jxlcd.com

Serial ID includes the information as below:

→ Manufactured Date:

Year: 0~9, for 2000~2009;

Month: 1~9 & A~C for Jan.~Dec.;

Date: 1~9 & A~V (exclude I, O, Q, U) for 1st~31st.

→ Serial Number: Module packing sequence number

CN-XXXXXX-XXXXX-

XXX-XXXX-XXX Made In China DP/N XXXXXX

Z2 Z3 Z4 Z 5 Z

1

73 mm

Z1 Z2 Z3 Z4 Z

- Z 7 - Z

6

INNOLux

9 Z10

Z

Serial No.

INL internal use

Year, Month, Date.

INL internal use

5 Z 6-Z 7-Z8 Z9 Z10 Z 11 Z 12

Z

8

11

Z

12

TM

r

8-2. Carton label

SPEC NO.

PAGE

BT101IW04 V.0

19/ 26

101.6mm

PKG ID (3S) 7287072873Z1Z2Z3Z4Z5Z6Z7Z8Z90NXV4PZ10Z

DP/N 0NXV4P

Box Qty Z

Serial ID: (3S) 72870 72873 Z

www.jxlcd.com

10Z11

1Z2 Z3

152.4mm

11

REV XXX

Vendor ID︱Loc ID

72870 7∣ 5680

Made in

China

Z4 Z5 Z6 Z7 Z8 Z9 0NXV4P Z10Z11

Mfg ID

72873

Box

Part Number

Unique Numbe

Date Code

Mfg ID

Vendor ID

Identifie

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM INNOLUX DISPLAY CORPORATION.

9. Packing Form

Full packing: 40pcs Module.

SPEC NO.

PAGE

BT101IW04 V.0

20/ 26

www.jxlcd.com

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM INNOLUX DISPLAY CORPORATION.

SPEC NO.

PAGE

BT101IW04 V.0

21/ 26

Appendix: EDID Code

Byte Value Value

(hex)

0

1

2

3

EDID Version

Parameters

Coordinates

Timings

4

5

6

7

8

9

0A

0B

0C

0D

0E

0F

10

11

12

13

14

15

16

17

18

19

1A

1B

1C

1D

1E

1F

20

21

22

23

24

25

Header

Vendor / Product

Display

Panel Color

Established

Header

EISA manufacture code = 3 Character ID

EISA manufacture code (Compressed ASCII)

Panel Supplier Reserved – Product Code

LCD module Serial No - Preferred but Optional (“0” if not used)

Week of manufacture

Year of manufacture

EDID structure version # = 1

www.jxlcd.com

EDID revision # = 4

Video I/P definition = Digital I/P

Max H image size = (22.2= 22cm)

Max V image size = (12.5=12 cm)

Display gamma = (gamma ×100)-100 = Example: ( 2.2×100 )–100 = 120

Feature support ( no DPMS, Active off, RGB, timing BLK 1)

Red/Green Low bit (RxRy/GxGy)

Blue/White Low bit (BxBy/WxWy)

Red x Rx=0.5801

Red y Ry= 0.3408

Green x Gx= 0.3105

Green y Gy= 0.5508

Blue x Bx= 0.1553

Blue y By= 0.1553

White X Wx= 0.3135

White Y Wy= 0.3291

Established timings 1 (00h if not used)

Established timings 2 (00h if not used)

Manufacturer’s timings (00h if not used)

Field Name and Comments

(hex) (binary)

00

FF

00

25

CC

0E

00

14

01

04

90

16

0C

78

0A

98 F5 94 57 4F 8D 27 27 50 54

00

00000000

11111111 11111111 11111111 11111111 11111111

11111111 00000000 00100101 11001100 00001110 00000000 00000000 00000000 00000000 00000000 00000000 00010100 00000001 00000100

10010000 00010110 00001100

01111000 00001010

10011000 11110101 10010100 01010111 01001111 10001101 00100111 00100111 01010000 01010100 00000000 00000000 00000000

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM INNOLUX DISPLAY CORPORATION.

Standard timing ID1 (01h if not used)

26

Standard timing ID1 (01h if not used)

27

Standard timing ID2 (01h if not used)

28

Standard timing ID2 (01h if not used)

29

2A

2B

2C

2D

2E

2F

Standard Timing ID

3A

3B

3C

3D

3E

3F

Timing Descripter #1

4A

4B

4C

4D

Timing Descripter #2

4E

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM INNOLUX DISPLAY CORPORATION.

Standard timing ID3 (01h if not used)

Standard timing ID4 (01h if not used)

Standard timing ID5 (01h if not used)

Standard timing ID6 (01h if not used)

30

Standard timing ID6 (01h if not used)

31

Standard timing ID7 (01h if not used)

32

Standard timing ID7 (01h if not used)

33

Standard timing ID8 (01h if not used)

34

Standard timing ID8 (01h if not used)

35

Pixel Clock/10,000 (Pixel Clock=57.5MHz) (LSB)

36

Pixel Clock/10,000 (Pixel Clock=57.5MHz) (MSB)

37

Horizontal Active=1024 pixels (lower 8 bits)

38

Horizontal Blanking (Thbp) = 454 pixels (lower 8 bits)

39

Horizontal Active/Horizontal blanking (Thbp) (upper4:4 bits)

Vertical Active = 600 lines

www.jxlcd.com

Vertical Blanking (Tvbp) = 48 lines(DE Blanking typ. for DE only panels)

Vertical Active : Vertical Blanking (Tvbp) (upper4:4 bits)

Horizontal Sync, Offset (Thfp) = 48 pixels

Horizontal Sync, Pulse Width = 32 pixels

Vertical Sync, Offset (Tvfp) = 3 lines Sync Width = 6 lines

40

Horizontal Vertical Sync Offset/Width upper 2 bits

41

Horizontal Image Size =222 mm

42

Vertical image Size = 125 mm

43

Horizontal Image Size / Vertical image size

44

Horizontal Border = 0 (Zero for Notebook LCD)

45

Vertical Border = 0 (Zero for Notebook LCD)

46

Non-interlaced, Normal, no stereo, Separate sync, H/V pol Negatives, DE only

47

note: LSB is set to “1” if panel is DE-timing only. H/V can be ignored.

Pixel Clock/10,000 (Pixel Clock=57.5Hz) (LSB)

48

Pixel Clock/10,000 (Pixel Clock=57.5MHz) (MSB)

49

Horizontal Active = 1024 pixels (lower 8 bits)

Horizontal Blanking (Thbp) = 454 pixels (lower 8 bits)

Horizontal Active/Horizontal blanking (Thbp) (upper4:4 bits)

Vertical Active = 600 lines

Vertical Blanking (Tvbp) = 48 lines (DE Blanking typ. for DE only panels)

SPEC NO.

PAGE

BT101IW04 V.0

22/ 26

01

76

16

00

C6

41

58

30

20

36

00

DE

7D

00

18

76

16

00

C6

41

58

30

00000001 00000001 00000001 00000001 00000001 00000001 00000001 00000001 00000001 00000001 00000001 00000001 00000001 00000001 00000001 00000001 01110110 00010110 00000000 11000110 01000001 01011000 00110000 00100000 00100000 00100000 00110110 00000000 11011110 01111101 00000000 00000000 00000000

00011000 01110110 00010110 00000000 11000110 01000001 01011000 00110000

Timing Descripter #3

Timing Descripter #4

4F

5A

5B

5C

5D

5E

5F

Dell specific information

6A

6B

6C

6D

6E

6F

Vertical Active : Vertical Blanking (Tvbp) (upper4:4 bits)

Horizontal Sync, Offset (Thfp) = 48 pixels

50

Horizontal Sync, Pulse Width = 32 pixels

51

Vertical Sync, Offset (Tvfp) = 3 lines Sync Width = 6 lines

52

Horizontal Vertical Sync Offset/Width upper 2 bits

53

Horizontal Image Size =222mm

54

Vertical image Size = 125 mm

55

Horizontal Image Size / Vertical image size

56

Horizontal Border = 0 (Zero for Notebook LCD)

57

Vertical Border = 0 (Zero for Notebook LCD)

58

Non-interlaced, Normal, no stereo, Separate sync, H/V pol Negatives, DE only

59

note: LSB is set to “1” if panel is DE-timing only. H/V can be ignored.

Flag

Dummy Descriptor

Flag

Dell P/N 1st Character "N"

Dell P/N 2nd Character"X"

60

Dell P/N 3rd Character"V"

61

Dell P/N 4th Character"4"

62

Dell P/N 5th Character"P"

63

LCD Supplier EEDID Revision #

64

www.jxlcd.com

Manufacturer P/N"1"

65

Manufacturer P/N"0"

66

Manufacturer P/N"1"

67

Manufacturer P/N"I"

68

Manufacturer P/N"W"

69

Manufacturer P/N"0"

Manufacturer P/N (If <13 char, then terminate with ASCII code 0Ah, set remaining char = 20h) "4"

Flag

Data Type Tag: Manufacturer Specified Data 00

Flag

70

Color Management

71

Panel Type and Revision

72

Frame Rate

73

Light Controller Interface and Maximum Luminance (200nit)

74

Outdoor Features and Polarizer

75

Multi-Media Features

76

Multi-Media Features

77

Special Features

78

SPEC NO.

PAGE

BT101IW04 V.0

23/ 26

20

30

20

36

00

DE

7D

00

18

00

FE

00

4E

58

56

34

50

14

31

30

31

49

57

30

34

00

41

00

94

00

00100000 00110000 00100000 00110110 00000000 11011110 01111101 00000000 00000000 00000000

00011000 00000000 00000000 00000000

11111110 00000000 01001110 01011000 01010110 00110100 01010000 00010100 00110001 00110000 00110001 01001001 01010111 00110000

00110100 00000000 00000000 00000000 00000000 00000000 00000000 01000001 00000000 10010100 00000000 00000000 00000000 00000000

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM INNOLUX DISPLAY CORPORATION.

Special Features

79

SPEC NO.

PAGE

BT101IW04 V.0

24/ 26

01

00000001

Checksum

7A

7B

7C

7D

7E

7F

Special Features

(If <13 char, then terminate with ASCII code 0Ah, set remaining char = 20h)

Extension flag (# of optional 128 EDID extension blocks to follow, Typ = 0)

Checksum (The 1-byte sum of all 128 bytes in this EDID block shall = 0)

01

0A

20

00

B3

00000001 00001010 00100000

00100000

00000000

10110011

www.jxlcd.com

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM INNOLUX DISPLAY CORPORATION.

10. Mechanical drawings

10-1. Front Side

SPEC NO.

PAGE

BT101IW01 V.0

21/ 26

www.jxlcd.com

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM INNOLUX DISPLAY CORPORATION.

10-2. Rear Side

SPEC NO.

PAGE

BT101IW01 V.0

22/ 26

www.jxlcd.com

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM INNOLUX DISPLAY CORPORATION.

SPEC NO.

PAGE

BT101IW01 V.0

23/ 26

Appendix: EDID Code

Byte Value Value

Vendor / Product

Header

EDID Version

(hex)

0

1

2

3

4

5

6

7

8

9

0A

0B

0C

0D

0E

0F

10

11

12

13

Header

EISA manufacture code = 3 Character ID

EISA manufacture code (Compressed ASCII)

Panel Supplier Reserved – Product Code

LCD module Serial No - Preferred but Optional (“0” if not used)

Week of manufacture-->

www.jxlcd.com

Year of manufacture – 1990 (ex. 2005-1990=15) -->2009

EDID structure version # = 1

EDID revision # = 4

Field Name and Comments

(hex) (binary)

00 00000000

FF 11111111

00 00000000

25 00100101

CC 11001100

0E 00001110

00 00000000

29 00101001

13 00010011

01 00000001

04 00000100

Video I/P definition = Digital I/P (80h)

14

Max H image size = (22.2= 22cm)

15

Max V image size = (12.5=12 cm)

16

Display

Parameters

1A

1B

1C

1D

1E

Panel Color

Coordinates

1F

shed

Timing

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM INNOLUX DISPLAY CORPORATION.

Display gamma = (gamma ×100)-100 = Example: ( 2.2×100 )–100 = 120

17

Feature support ( no DPMS, Active off, RGB, timing BLK 1)

18

Red/Green Low bit (RxRy/GxGy)

19

Blue/White Low bit (BxBy/WxWy)

Red x Rx=TBD

Red y Ry= TBD

Green x Gx= TBD

Green y Gy= TBD

Blue x Bx= TBD

Blue y By= TBD

20

White X Wx= TBD

21

White Y Wy= TBD

22

Established timings 1 (00h if not used)

23

Established timings 2 (00h if not used)

24

80 10000000

16 00010110

0C 00001100

78 01111000

0A 00001010

00 00000000 00 00000000 00 00000000 00 00000000 00 00000000 00 00000000 00 00000000 00 00000000 00 00000000 00 00000000

00 00000000

Standard Timing ID

Timing Descripter #1

Timing Descripter #2

2A

2B

2C

2D

2E

2F

3A

3B

3C

3D

3E

3F

4A

4B

4C

4D

Manufacturer’s timings (00h if not used)

25

Standard timing ID1 (01h if not used)

26

Standard timing ID1 (01h if not used)

27

Standard timing ID2 (01h if not used)

28

Standard timing ID2 (01h if not used)

29

Standard timing ID3 (01h if not used)

Standard timing ID4 (01h if not used)

Standard timing ID5 (01h if not used)

Standard timing ID6 (01h if not used)

30

Standard timing ID6 (01h if not used)

31

Standard timing ID7 (01h if not used)

32

Standard timing ID7 (01h if not used)

33

Standard timing ID8 (01h if not used)

34

Standard timing ID8 (01h if not used)

35

Pixel Clock/10,000 (Pixel Clock=58.6MHz) (LSB)

36

Pixel Clock/10,000 (Pixel Clock=58.6MHz) (MSB)

37

Horizontal Active=1024 pixels (lower 8 bits)

38

Horizontal Blanking (Thbp) = 483 pixels (lower 8 bits)

39

Horizontal Active/Horizontal blanking (Thbp) (upper4:4 bits)

www.jxlcd.com

Vertical Active = 600 lines

Vertical Blanking (Tvbp) = 48 lines(DE Blanking typ. for DE only panels)

Vertical Active : Vertical Blanking (Tvbp) (upper4:4 bits)

Horizontal Sync, Offset (Thfp) = 48 pixels

Horizontal Sync, Pulse Width = 32 pixels

Vertical Sync, Offset (Tvfp) = xx lines Sync Width = xx lines

40

Horizontal Vertical Sync Offset/Width upper 2 bits

41

Horizontal Image Size =222 mm

42

Vertical image Size = 125 mm

43

Horizontal Image Size / Vertical image size

44

Horizontal Border = 0 (Zero for Notebook LCD)

45

Vertical Border = 0 (Zero for Notebook LCD)

46

Non-interlaced, Normal, no stereo, Separate sync, H/V pol Negatives, DE only

47

note: LSB is set to “1” if panel is DE-timing only. H/V can be ignored.

Pixel Clock/10,000 (Pixel Clock=58.6MHz) (LSB)

48

Pixel Clock/10,000 (Pixel Clock=58.6MHz) (MSB)

49

Horizontal Active = 1024 pixels (lower 8 bits)

Horizontal Blanking (Thbp) = 483 pixels (lower 8 bits)

Horizontal Active/Horizontal blanking (Thbp) (upper4:4 bits)

Vertical Active = 600 lines

SPEC NO.

PAGE

BT101IW01 V.0

24/ 26

00 00000000

01 00000001

E4 11100100

16 00010110

00 00000000

E3 11100011

41 01000001

58 01011000

30 00110000

20 00100000

30 00110000

20 00100000

36 00110110

00 00000000

DE 11011110

7D 01111101

00 00000000

18 00011000

E4 11100100

16 00010110

00 00000000

E3 11100011

41 01000001

58 01011000

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM INNOLUX DISPLAY CORPORATION.

Timing Descripter #3

Timing Descripter #4

4E

4F

5A

5B

5C

5D

5E

5F

Dell specific information

6A

6B

6C

6D

6E

6F

Vertical Blanking (Tvbp) = 48 lines (DE Blanking typ. for DE only panels)

Vertical Active : Vertical Blanking (Tvbp) (upper4:4 bits)

Horizontal Sync, Offset (Thfp) = 48 pixels

50

Horizontal Sync, Pulse Width = 32 pixels

51

Vertical Sync, Offset (Tvfp) = xx lines Sync Width = xx lines

52

Horizontal Vertical Sync Offset/Width upper 2 bits

53

Horizontal Image Size =222mm

54

Vertical image Size = 125 mm

55

Horizontal Image Size / Vertical image size

56

Horizontal Border = 0 (Zero for Notebook LCD)

57

Vertical Border = 0 (Zero for Notebook LCD)

58

Module “A” Revision = Example: 00, 01, 02, 03, etc.

59

Flag

Dummy Descriptor

Flag

Dell P/N 1st Character "N"

Dell P/N 2nd Character"X"

60

Dell P/N 3rd Character"V"

61

Dell P/N 4th Character"4"

62

Dell P/N 5th Character"P"

63

www.jxlcd.com

LCD Supplier EEDID Revision #

64

Manufacturer P/N"1"

65

Manufacturer P/N"0"

66

Manufacturer P/N"1"

67

Manufacturer P/N"I"

68

Manufacturer P/N"W"

69

Manufacturer P/N"0"

Manufacturer P/N (If <13 char, then terminate with ASCII code 0Ah, set remaining char = 20h) "4"

Flag

Data Type Tag:

Flag

70

Reserved

71

Reserved

72

Reserved

73

Reserved

74

Reserved

75

Reserved

76

Reserved

77

SPEC NO.

PAGE

BT101IW01 V.0

25/ 26

30 00110000

20 00100000

30 00110000

20 00100000

36 00110110

00 00000000

DE 11011110

7D 01111101

00 00000000

18 00011000

00 00000000

FE 1111111 0

00 00000000

4E

58

56

34

50

00

31

30

31

49

57

30

34

00 00000000

41 01000001

01 00000001

94 10010100

00 00000000

01001110

01011000

01010110

00110100

01010000

00000000

00110001

00110000

00110001

01001001

01010111

00110000

00110100

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM INNOLUX DISPLAY CORPORATION.

Reserved

78

Number of LVDS receiver chips = ‘01’ or ‘02’

79

SPEC NO.

PAGE

BT101IW01 V.0

26/ 26

00 00000000

01 00000001

7A

7B

7C

7D

7E

7F

Checksum

BIST Enable: Yes = ‘01’ No = ‘00’

(If <13 char, then terminate with ASCII code 0Ah, set remaining char = 20h)

Extension flag (# of optional 128 EDID extension blocks to follow, Typ = 0)

Checksum (The 1-byte sum of all 128 bytes in this EDID block shall = 0)

01 00000001

0A 00001010

20 00100000

00 00000000

DE 11011110

www.jxlcd.com

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR

TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM INNOLUX DISPLAY CORPORATION.

INNOLUX BT101IW04-V0 SPECIFICATION

Specifications and Main Features

Frequently Asked Questions

User Manual