INMUSIC LUBXRX Users Manual

MicLink Wireless

User Guide

English

User Guide (English)

1. Make sure all items listed in the Box Contents are included.

2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT.

3. Place the product in an appropriate location for

operation.

Support

For complete system requirements, compatibility information, and product registration, visit the Alesis website: alesis.com/miclink-wireless.

For additional product support, visit alesis.com/support.

Box Contents

 MicLink Wireless Transmitter  MicLink Wireless Receiver  Power Adapter  Mini USB Cable  User Guide  Safety & Warranty Manual

Quick Setup

1. First, ensure that the transmitter has been fully charged.

2. Connect your dynamic microphone to the transmitter.

3. Use a standard 1/4" cable (not included) to connect the receiver's Output to your mixer or

powered speaker.

4. Install batteries or use the included power adapter to provide power to the receiver.

5. Flip the power switch to the "On" position for the transmitter and receiver.

6. Press the Pair Button on both the transmitter and the receiver. The Pair LED will be lit solid on

the transmitter and receiver when they have successfully connected.

7. Set the receiver antenna to a vertical position.

8. Set the volume control on the receiver to the highest level possible without distorting or clipping

the mixer or powered speaker. This level will vary with the settings of mixer or powered speaker gain and/or volume.

Connection Diagram

Microphone*

Receiver

Transmitter

Mixer*

Powered Speake

*sold separately

Transmitter Features

1. MicLink Power Switch – Adjust this switch to turn the

transmitter on/off.

2. Pairing LED – Blinks slowly when searching for the receiver.

Blinks rapidly when pairing to the receiver. Lights up solid when paired to the receiver.

3. Mic Release – Press this clip to secure or release your mic

with the transmitter.

4. Mini USB Port – Connect the included Mini USB cable to

charge the transmitter.

5. Charging LED – Illuminates red when the transmitter is being

charged. Illuminates green when the transmitter is finished charging.

6. Pair Button – Press this button to connect the transmitter with

the receiver.

Receiver Features

Front Panel

1. Pair Button – Press this button to

connect to the transmitter. The Pair LED will illuminate when connected to the transmitter.

2. Pair LED – Blinks slowly when

searching for the transmitter. Blinks rapidly when pairing to the transmitter. Lights up solid when paired to the transmitter.

3. Power LED – Illuminates when the receiver is powered on.

4. Volume – Adjusts the volume of the signal going to the Output.

5. Output – Use a standard 1/4" cable (not included) to connect the MicLink Wireless receiver to

your mixer or powered speaker.

Rear Panel

1. Battery Compartment – Insert 2

AAA batteries here to power the receiver.

2. On/Off Switch – Slide this switch

to power the receiver on.

3. Power Input – Connect the

included 5VDC, 1A Center-Pin Positive adapter power adapter here.

4. Antenna – Place the antenna in a vertical position for best results in transmitting the wireless

signal. If the wireless signal quality is poor, change the position of the antenna.

Troubleshooting

No signal:

• Make sure both the transmitter and receiver are powered on.

• Make sure you are within the 60-foot (20-meter) transmitting range.

• Make sure the transmitter and receiver have been paired.

• Make sure the volume controls on your mixer and speakers are turned up.

• Check the power LEDs on both the receiver and transmitter. If one of them is off, check that the

device is powered correctly:

o Connect the power adapter to (or install fresh AAA batteries in) the receiver. o Make sure the transmitter has been charged.

Weak signal:

• Make sure there are no objects (computers, walls, furniture, etc.) between the transmitter and

receiver.

• Make sure you are within the 60-foot (20-meter) transmitting range.

• If the receiver is being powered from batteries, install fresh AAA batteries.

Poor signal quality:

• Keep any connected audio cables away from the receiver’s antenna.

• If the receiver is being powered from batteries, install fresh AAA batteries.

Appendix (English)

Specifications

Dimensions (length x width x height):

Weight:

Transmitter: 0.10 lbs.; 0.04 kg

Wireless Connection: 2.4 GHz; 14 channels

Wireless Transmission Range: 60 feet; 20 meters

Receiver Power: 5VDC, 1A Center-Pin Positive adapter or 2 AAA batteries

Note:The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

Receiver: 4.6” x 2.6” x 1.25”; 117 mm x 66 mm x 32 mm

Transmitter: 1.25” x 4” x 1.25”; 32 mm x 102 mm x 32 mm

Receiver: 0.25 lbs.; 0.11 kg

alesis.com

Compliance v1.0

IMPORTANT SAFETY INSTRUCTIONS

WARRANTY INFORMATION ENGLISH ( 3 ±

7 )

INSTRUCCIONES IMPORTANTES DE SEGURIDAD E

INFORMACIÓN DE LA

ESPAÑOL ( 8 ± 11 )

GARANTÍA

INSTRUCTIONS IMPORTANTES DE SÉCURITÉ

INFORMATIONS DE

FRANÇAIS ( 12 ± 15 )

ISTRUZIONI IMPORTANTI DI SICUREZZA E

GARANTIE

INFORMAZIONI DELLA GARANZIA ITALIANO

( 16 ± 19 )

WICHTIGE

SICHERHEITSANWEISUNGEN UND

GARANTIEINFORMATIONEN

DEUTSCH ( 20 ± 23 )

PRODUCT WARRANTY

1. What is covered and for how long? ALL PRODUCTS: inMusic Brands, Inc. ("inMusic") warrants to the original purchaser that Alesis products and all other

accessories are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase from an authorized Alesis dealer and continuing for the following period of time after that date for one (1) year. inMusic warrants factory-refurbished merchandise to be free of material and operational defects for a period of ninety (90) days from the original date of retail sale. This refurbished merchandise warranty is not transferable.

2. What is not covered? This Limited Warranty is conditioned upon proper use of the product by the purchaser. This Limited Warranty does not cover:

Ƅ Damage caused by improper installation or improper connection to any peripheral Ƅ Damage caused by an external electrical fault Ƅ Damage from use of parts not manufactured or sold by Alesis Ƅ Product purchased from anyone other than an Alesis authorized dealer Ƅ Modifications to product not approved in writing by Alesis Ƅ Equipment that has the serial number removed or made illegible Ƅ Normal cosmetic and mechanical wear Ƅ Damage or loss during transit to an Authorized Alesis Repair Center Ƅ Units that are purchased and/or located outside of the continental USA

3. What are inMusic's obligations? During the applicable warranty period, Alesis will repair or replace, at Alesis's sole option, without charge to the purchaser, any defective component part of the product. To obtain service under this Limited Warranty, purchaser must first contact Alesis and obtain a return authorization number ("RA#"). Purchaser must then return the product to Alesis in an adequate container for shipping, accompanied by purchaser's sales receipt or comparable proof of sale showing the date of purchase, the serial number of the product, and the seller's name and address. To obtain an RA# and assistance on where to return the product, contact Alesis customer service at 401-658-5760. Upon receipt, Alesis will repair or replace the defective products. Alesis may, at Alesis's sole option, use rebuilt, reconditioned, or new parts or components when repairing any product or replace a product with a rebuilt, reconditioned, new or comparable product. Repaired products will be warranted for a period equal to the remainder of the original Limited Warranty on the original product or for 90 days, whichever is longer. All replaced parts, components, boards, and equipment become the property of Alesis. If Alesis determines that any product is not covered by this Limited Warranty, purchaser must pay all parts, shipping, and labor charges for the repair or return of such product.

(U.S.A

4. What are the limits on inMusic's liabilities? THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY, TOGETHER WITH ANY IMPLIED WARRANTIES COVERING ALESIS PRODUCTS, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, INMUSIC OR ALESIS SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES, LOSS OF PROFITS, DAMAGES TO PURCHASER'S PROPERTY, OR INJURY TO PURCHASER OR OTHERS ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE ANY ALESIS PRODUCT, BREACH OF WARRANTY, OR NEGLIGENCE, INCLUDING BUT NOT LIMITED TO INMUSIC'S OR ALESIS'S OWN NEGLIGENCE, EVEN IF INMUSIC, ALESIS, OR THEIR AGENTS HAVE BEEN ADVISED OF SUCH DAMAGES, OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. THIS LIMITED WARRANTY IS THE COMPLETE WARRANTY FOR ALESIS PRODUCTS, AND IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR UNENFORCEABILTY SHALL NOT AFFECT THE ENFORCEABILITY OF THE REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS.

This Limited Warranty allocates risk of product failure between purchaser and Alesis, and Alesis's product pricing reflects this allocation of risk and the limitations of liability contained in this Limited Warranty. The agents, employees, distributors, and dealers of Alesis are not authorized to make modifications to this Limited Warranty, or make additional warranties binding on Alesis or inMusic. Accordingly, additional statements such as dealer advertising or presentation, whether oral or written, do not constitute warranties by Alesis or inMusic and should not be relied upon.

5. How does state law apply to this warranty? SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO PURCHASER.

This Limited Warranty gives you specific legal rights. You may also have other rights, which vary from one jurisdiction to another.

PRODUCT WARRANTY

1. inMusic Brands, Inc. ("inMusic") warrants to the original purchaser that Alesis products are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase from an authorized Alesis dealer and continuing for the following period of time after that date for (1) Year.

2. This Limited Warranty is conditioned upon proper use of the product by the purchaser. This Limited Warranty does not cover: (a) defects or damage resulting from accident, misuse, abuse, neglect, unusual physical or electrical stress, modification of any part of the product, or cosmetic damage; (b) equipment that has the serial number removed or made illegible; (c) all plastic surfaces and other externally exposed parts that are scratched or damaged due to normal use; (d) defects or damage from improper testing, operation, maintenance, installation, adjustment, or service of the products.

3. During the applicable warranty period, Alesis will repair or replace, at Alesis's sole discretion, without charge to the purchaser, any defective component part of the product. Alesis may, at Alesis's sole discretion, use rebuilt, reconditioned, or new parts or components when repairing any product or replace a product with a rebuilt, reconditioned, new or comparable product.

4. THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY, TOGETHER WITH ANY IMPLIED WARRANTIES COVERING ALESIS PRODUCTS, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, INMUSIC OR ALESIS SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES, LOSS OF PROFITS, DAMAGES TO PURCHASER'S PROPERTY, OR INJURY TO PURCHASER OR OTHERS ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE ANY ALESIS PRODUCT, BREACH OF WARRANTY, OR NEGLIGENCE, INCLUDING BUT NOT LIMITED TO INMUSIC'S OR ALESIS'S OWN NEGLIGENCE, EVEN IF INMUSIC, ALESIS, OR ITS AGENTS HAVE BEEN ADVISED OF SUCH DAMAGES, OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. THIS LIMITED WARRANTY IS THE COMPLETE WARRANTY FOR ALESIS'S PRODUCTS, AND IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR UNENFORCEABILTY SHALL NOT AFFECT THE ENFORCEABILITY OF THE REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS.

(NON-U

.S.A.)

Please record the serial number of your unit as shown on the back of the chassis as well as the name of the dealer from whom you purchased the unit. Retain this information and your original purchase receipt for your records. Go to our web site alesis.com to register your product with us.

MODEL:

SERIAL NUMBER: DATE OF PURCHASE:

PURCHASED FROM:

RETURN INFORMATIO



A Return Authorization number must be obtained from your local Alesis Representative. For

your representative go to alesis.com.



A copy of the original sales receipt must also be included for the equipment to be repaired

under warranty.



The faulty equipment must be packed in its original packaging.



One additional outer layer of packaging must be included to ensure product safety. Failures to do so

may inadequately protect the equipment in transit and, therefore, jeopardize the customer's warranty.



Alesis will not accept C.O.D. shipments and no call tags will be issued for merchandise return.



Alesis will not return repaired merchandise to customers by priority service, unless by written request at

the customer's cost. Requests must be submitted in writing with merchandise returned.



The defective Alesis equipment should be sent, FREIGHT PREPAID with Return Authorization number

clearly printed on the outer packaging and original sales receipt enclosed to your local service center

VERY IMPO

Please read this section before connecting this unit to your system:

For optimum performance:



All the slide faders are subject to wear. Excessive force can wear out the fader quickly. User

replaceable slide faders are not a warranted item.



Never use spray cleaners on the slide controls. Residues cause excessive dirt build-up and this will

void your warranty. In normal use slide controls can last for many years. If they malfunction (usually because of a dirty or dusty environment) consult a professional technician.



Always make sure that AC power is OFF while making any connections.



Use appropriate cables throughout your system. Do not use excessively long cables (i.e. over 32 feet /

10 meters). Be sure plugs and jacks are tightly mated. Loose connections can cause hum, noise or intermittents that could easily damage your speakers. Make the input and output connections with readily available low-capacitance stereo cables. Quality cable makes a big difference in audio fidelity and punch. See your Alesis dealer or an electronics or audio specialist store if you are not sure which cables to use.



Never attempt to make any adjustments other than those described in this manual, or repairs. Take the

unit to your dealer or to an authorized Alesis Service Center.



Always remember: "TURN AMPS ON LAST AND OFF FIRST." Begin with master faders or

volume controls on minimum and the amplifier gain/input control(s) down. Wait 8 to 10 seconds before turning up the volume. This prevents transients which may cause severe speaker damage.



Use restraint when operating controls. Try to move them slowly. Rapid adjustments could

damage equipment due to amplifier clipping.



Avoid amplifier "clipping" at all costs: this occurs when the red LEDs (usually on the front panel of most

professional power amplifiers) start flashing. "Clipping" is when the power amplifier is distorting and working beyond its limits. Amplifier distortion is THE major cause of speaker failure.



To prevent fire or shock hazard, do not expose the unit to rain or moisture. Never place cans of beer,

soda, glasses of water or anything wet near or on top of the unit!



Headphone outputs can be set to levels which can cause damage to your ears. Use caution.

RTANT



This unit may contain a microcomputer for signal processing and control functions. In very rare

situations, severe interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely event that this should happen, turn off the unit, wait at least five seconds, and then turn it back on again.



Under rare circumstances, if this product is exposed to electromagnetic interference during use, there

may be a slight drop in signal-to-noise ratio.



Intended electromagnetic environments: residential, commercial, light industrial, urban outdoors.

IMPORTANT SAFETY IN

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all Instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)

that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachment/accessories specified by the

manufacturer.

12. Use only the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of

time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15. Power Sources - This product should be connected to a power supply only of the type described in these operating instructions, or as marked on the unit.

16. Internal/External Voltage Selectors - Internal or external voltage selector switches, if any, should only be reset and re- equipped with a proper plug for alternative voltage by a qualified service technician. Do not attempt to alter this yourself.

17. Water and Moisture - This product should be kept away from direct contact with liquids. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

18. CAUTION ± Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent

type.

Batteries (a battery pack or an installed battery) shall not be exposes to excessive heat such as sunshine, fire, etc.

19. Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

20. Protective earthing terminal: The apparatus should be connected to a mains socket outlet with a protective earthing connection.

a. Finland (Suomi): Laite on liitettävä suojamaadoituskoskettimilla varustettuun pistorasiaan. b. Norway (Norge): Apparatet må tilkoples jordet stikkontakt. c. Sweden (Sverige): Apparaten skall anslutas till jordat uttag.

21. This symbol means the equipment is a Class II or double-insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

22. Do not install this equipment in a confined or "boxed-in" space such as a bookcase or similar

unit, and

maintain good ventilation conditions. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, tablecloths, curtains, etc.

23. This apparatus is for professional use

only.

24. When moving or not using the appliance, secure the power cord (e.g., wrap it with a cable tie). Be careful not to damage the power cord. Before using it again, make sure the power cord has not been damaged. If the power cord has been damaged at all, bring the unit and cord to a qualified service technician for repair or replacement as specified by the manufacturer.

25. WARNING: Excessive sound pressure (high volumes) from headphones can cause hearing

loss.

26. WARNING: Please refer to any important information (e.g., electrical, safety, etc.) printed on the exterior bottom enclosure or rear panel before installing or operating the product.

STRUCTIO

SERVICE



servicing.



equivalents.



Disconnect power cord before

Replace critical components only with factory parts or recommended

For AC line powered units ± Before returning repaired unit to user, use an ohmmeter to measure from both AC plug

blades to all exposed metal parts. The resistance should be more than 2,000,000 ohms.

SAFETY

CAUTION: TO REDUCE THE

RISK OF

INSTRUCTIONS

NOTICES

ELECTRIC

SHOCK, DO NOT REMOVE ANY COVER. NO USER-

+ 32 hidden pages

INMUSIC LUBXRX Users Manual

Specifications and Main Features

Frequently Asked Questions

User Manual