INMUSIC DP27 User Manual

Important Safety Instructions
& Warranty Information

Instrucciones importantes de seguridad
e información de la garantía

Instructions importantes de sécurité
et informations de garantie

Istruzioni importanti di sicurezza
e le informazioni della garanzia

English (3–7)

Español (8–11)

Français (12–15)

Italiano (16–19)

Wichtige Sicherheitsanweisungen
und Garantieinformationen

Deutsch (20–23)

Denon is a trademark of D&M Holdings Inc., registered in the U.S. and other countries. Denon Professional
products are produced by inMusic Brands, Inc., Cumberland, RI 02864 U.S.A.

®

is the registered trademark and service mark of the National Electrical Manufacturers Association.

NEMA
All other product names, company names, trademarks, or trade names are those of their respective owners.

2

Product Warranty

1. What is covered and for how long?
All Products: inMusic Brands, Inc. (“inMusic”) warrants to the original purchaser that Denon Professional

(“Denon Pro”) products and all other accessories are free from defects in material and workmanship under
normal use and service for the period commencing upon the date of purchase from an authorized Denon Pro
dealer and continuing for the following period of time after that date for one (1) year. inMusic warrants factory­refurbished merchandise to be free of material and operational defects for a period of ninety (90) days from the
original date of retail sale. This refurbished merchandise warranty is not transferable.

2. What is not covered? This Limited Warranty is conditioned upon proper use of the product by the purchaser.
This Limited Warranty does not cover: (a) damage caused by improper installation or improper connection to any
peripheral; (b) damage caused by an external electrical fault; (c) damage from use of parts not manufactured or
sold by Denon Pro; (d) product purchased from anyone other than an Denon Pro authorized dealer; (e)
modifications to product not approved in writing by Denon Pro; (f) equipment that has the serial number removed
or made illegible; (g) normal cosmetic and mechanical wear; (h) damage or loss during transit to an Authorized
Denon Pro Repair Center; or (i) units that are purchased and/or located outside of the continental USA.

3. What are inMusic’s obligations? During the applicable warranty period, Denon Pro will repair or replace, at Denon
Pro’s sole option, without charge to the purchaser, any defective component part of the product. To obtain service
under this Limited Warranty, purchaser must first contact Denon Pro and obtain a return merchant authorization
(“RMA”) number. Purchaser must then return the product to Denon Pro in an adequate container for shipping,
accompanied by purchaser’s sales receipt or comparable proof of sale showing the date of purchase, the serial
number of the product, and the seller’s name and address. To obtain an RMA number and assistance on where to
return the product, contact Denon Pro customer service at 401-658-5766. Upon receipt, Denon Pro will repair or
replace the defective products. Denon Pro may, at Denon Pro’s sole option, use rebuilt, reconditioned, or new parts
or components when repairing any product or replace a product with a rebuilt, reconditioned, new or comparable
product. Repaired products will be warranted for a period equal to the remainder of the original Limited Warranty on
the original product or for 90 days, whichever is longer. All replaced parts, components, boards, and equipment
become the property of Denon Pro. If Denon Pro determines that any product is not covered by this Limited
Warranty, purchaser must pay all parts, shipping, and labor charges for the repair or return of such product.

4. What are the limits on inMusic’s liabilities? THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY,
TOGETHER WITH ANY IMPLIED WARRANTIES COVERING DENON PRO PRODUCTS, INCLUDING WITHOUT
LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, INMUSIC OR DENON PRO SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL,
CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES, LOSS OF PROFITS, DAMAGES TO PURCHASER’S
PROPERTY, OR INJURY TO PURCHASER OR OTHERS ARISING OUT OF THE USE, MISUSE OR INABILITY TO
USE ANY DENON PRO PRODUCT, BREACH OF WARRANTY, OR NEGLIGENCE, INCLUDING BUT NOT LIMITED
TO INMUSIC’S OR DENON PRO’S OWN NEGLIGENCE, EVEN IF INMUSIC, DENON PRO, OR THEIR AGENTS
HAVE BEEN ADVISED OF SUCH DAMAGES, OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY
OTHER PARTY. THIS LIMITED WARRANTY IS THE COMPLETE WARRANTY FOR DENON PRO PRODUCTS, AND
IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. THIS LIMITED WARRANTY SHALL NOT EXTEND TO
ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER’S
EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS ILLEGAL OR UNENFORCEABLE BY
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR UNENFORCEABILTY SHALL NOT AFFECT THE
ENFORCEABILITY OF THE REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES
IS AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS.
This Limited Warranty allocates risk of product failure between purchaser and Denon Pro, and Denon Pro’s
product pricing reflects this allocation of risk and the limitations of liability contained in this Limited Warranty.
The agents, employees, distributors, and dealers of Denon Pro are not authorized to make modifications to this
Limited Warranty, or make additional warranties binding on Denon Pro or inMusic. Accordingly, additional
statements such as dealer advertising or presentation, whether oral or written, do not constitute warranties by
Denon Pro or inMusic and should not be relied upon.

5. How does state law apply to this warranty? SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO PURCHASER.

This Limited Warranty gives you specific legal rights. You may also have other rights, which vary from one jurisdiction
to another.

Please record the serial number of your unit as shown on the back of the chassis as well as the name of the dealer
from whom you purchased the unit. Retain this information and your original purchase receipt for your records. Go
to our website denonpro.com to register your product with us.

Model: Purchased From:

Serial Number: Date of Purchase:

3

(for products purchased in the U.S.A.)

Product Warranty

1. inMusic Brands, Inc. (“inMusic”) warrants to the original purchaser that Denon Professional
(“Denon Pro”) products are free from defects in material and workmanship under normal use and
service for the period commencing upon the date of purchase from an authorized Denon Pro
dealer and continuing for the following period of time after that date for (1) Year.

2. This Limited Warranty is conditioned upon proper use of the product by the purchaser.
This Limited Warranty does not cover: (a) defects or damage resulting from accident, misuse,
abuse, neglect, unusual physical or electrical stress, modification of any part of the product, or
cosmetic damage; (b) equipment that has the serial number removed or made illegible; (c) all
plastic surfaces and other externally exposed parts that are scratched or damaged due to
normal use; (d) defects or damage from improper testing, operation, maintenance, installation,
adjustment, or service of the products.

3. During the applicable warranty period, Denon Pro will repair or replace, at Denon Pro’s sole
discretion, without charge to the purchaser, any defective component part of the product. Denon
Pro may, at Denon Pro’s sole discretion, use rebuilt, reconditioned, or new parts or components
when repairing any product or replace a product with a rebuilt, reconditioned, new or comparable
product.

4. THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY, TOGETHER WITH ANY IMPLIED
WARRANTIES COVERING DENON PRO PRODUCTS, INCLUDING WITHOUT LIMITATION ANY
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED
TO THE DURATION OF THIS LIMITED WARRANTY. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, INMUSIC OR DENON PRO SHALL NOT BE LIABLE FOR ANY SPECIAL,
INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES, LOSS OF PROFITS,
DAMAGES TO PURCHASER’S PROPERTY, OR INJURY TO PURCHASER OR OTHERS ARISING
OUT OF THE USE, MISUSE OR INABILITY TO USE ANY DENON PRO PRODUCT, BREACH OF
WARRANTY, OR NEGLIGENCE, INCLUDING BUT NOT LIMITED TO INMUSIC’S OR DENON PRO’S
OWN NEGLIGENCE, EVEN IF INMUSIC, DENON PRO, OR ITS AGENTS HAVE BEEN ADVISED OF
SUCH DAMAGES, OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY.
THIS LIMITED WARRANTY IS THE COMPLETE WARRANTY FOR DENON PRO’S PRODUCTS, AND
IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. THIS LIMITED WARRANTY SHALL NOT
EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND
STATES PURCHASER’S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS
ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILTY SHALL NOT AFFECT THE ENFORCEABILITY OF THE REMAINDER OF THIS
LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS.

This Limited Warranty allocates risk of product failure between purchaser and Denon Pro, and Denon
Pro’s product pricing reflects this allocation of risk and the limitations of liability contained in this
Limited Warranty. The agents, employees, distributors, and dealers of Denon Pro are not authorized
to make modifications to this Limited Warranty, or make additional warranties binding on Denon Pro
or inMusic. Accordingly, additional statements such as dealer advertising or presentation, whether
oral or written, do not constitute warranties by Denon Pro or inMusic and should not be relied upon.
Some jurisdictions do not allow limitations on how long an implied warranty lasts, so the above
limitation may not apply to you. This warranty gives you specific legal rights, and you may also have
other rights which vary under local laws.

Please record the serial number of your unit as shown on the back of the chassis as well as the name
of the dealer from whom you purchased the unit. Retain this information and your original purchase
receipt for your records. Go to our website denonpro.com to register your product with us.

Model: Purchased From:

Serial Number: Date of Purchase:

(for products purchased outside of the U.S.A.)

4

Return Information

• A return merchant authorization number must be obtained from your local Denon Pro representative.

For your representative go to denonpro.com.

• A copy of the original sales receipt must also be included for the equipment to be repaired under

warranty.

• The faulty equipment must be packed in its original packaging.

• One additional outer layer of packaging must be included to ensure product safety. Failure to do

so may inadequately protect the equipment in transit and therefore jeopardize the warranty.

• Denon Pro will not accept COD shipments and no call tags will be issued for merchandise return.

• Denon Pro will not return repaired merchandise to customers by priority service except by written

request at the customer’s cost. Requests must be submitted in writing with returned merchandise.

• The defective Denon Pro equipment should be sent freight prepaid with the return merchant

authorization number printed clearly on the outer packaging and original sales receipt enclosed to
your local service center.

Very Important

Please read this section before connecting this unit to your system:

For optimum performance:

• All slide faders are subject to wear. Excessive force can wear out the faders quickly. User-

replaceable slide faders are not covered by our warranty.

• Never use spray cleaners on the slide controls. Residues cause excessive dirt build-up and this

will void your warranty. In normal use, slide controls can last for many years. If they malfunction
(usually because of a dirty or dusty environment), consult a professional technician.

• Always make sure that AC power is off while making any connections.

• Use appropriate cables throughout your system. Do not use excessively long cables (i.e. over 32

feet / 10 meters). Be sure plugs and jacks are tightly mated. Loose connections can cause hum,
noise, or intermittents that could easily damage your speakers. Make the input and output
connections with readily available low-capacitance stereo cables. Cable quality makes a big
difference in audio fidelity and “punch.” See your Denon Pro dealer or an electronics or audio
specialist store if you are not sure which cables to use.

• Never attempt to make any adjustments other than those described in this manual, or repairs.

Take the unit to your dealer or to an authorized Denon Pro service center.

• Always remember: turn amps on last and off first. Begin with master faders or volume controls

on minimum and the amplifier gain/input control(s) down. Wait 8–10 seconds before turning up
the volume. This prevents transients which may cause severe speaker damage.

• Use restraint when operating controls. Try to move them slowly. Rapid adjustments could damage

equipment due to amplifier clipping.

• Avoid amplifier “clipping” at all costs: this occurs when the red LEDs (usually on the front panel of

most professional power amplifiers) start flashing. “Clipping” is when the power amplifier is
distorting and working beyond its limits. Amplifier distortion is the main cause of speaker failure.

• To prevent fire or shock hazard, do not expose the unit to rain or moisture. Never place cans of

beer, soda, glasses of water or anything wet near or on top of the unit!

• Headphone outputs can be set to levels which can cause damage to your ears. Use caution.

• This unit may contain a microcomputer for signal processing and control functions. In very rare

situations, severe interference, noise from an external source, or static electricity may cause it to
lockup. In the unlikely event that this should happen, turn off the unit, wait at least five seconds,
and then turn it back on again.

• Under rare circumstances, if this product is exposed to electromagnetic interference during use,

there may be a slight drop in signal-to-noise ratio.

• Intended electromagnetic environments: residential, commercial, light industrial, urban outdoors.

5

Important Safety Instructions

1. Read and keep these instructions. Heed all warnings and follow all Instructions.

2. Do not use this apparatus near water.

3. Clean only with dry cloth.

4. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install this equipment

in a confined or “boxed-in” space such as a bookcase or similar unit, and maintain good ventilation conditions. The ventilation
should not be impeded by covering the ventilation openings with items such as newspaper, tablecloths, curtains, etc.

5. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that

produce heat. Do not place exposed flame sources such as lighted candles on the apparatus.

6. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than

the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for
your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

7. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

8. Only use attachment/accessories specified by the manufacturer.

9. Use only the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus

(if applicable). When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.

10. Unplug this apparatus during lightning storms or when unused for long periods of time.

11. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

12. Power Sources: This product should be connected to a power supply only of the type described in these operating

instructions, or as marked on the unit.

13. Internal/External Voltage Selectors (if applicable): Internal or external voltage selector switches, if any, should only be reset and

re-equipped with a proper plug for alternative voltage by a qualified service technician. Do not attempt to alter this yourself.

14. Water and Moisture: This product should be kept away from direct contact with liquids. The apparatus shall not be

exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

15. Caution (if applicable): Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent

type. Batteries (a battery pack or an installed battery) shall not be exposes to excessive heat such as sunshine, fire, etc.

16. Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain

readily operable.

17. Protective earthing terminal (if applicable): The apparatus should be connected to a mains socket outlet with a

protective earthing connection.

• Denmark (Danmark): Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse til stikproppens jord.

• Finland (Suomi): Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.

• Norway (Norge): Apparatet må tilkoples jordet stikkontakt.

• Sweden (Sverige): Apparaten skall anslutas till jordat uttag.

18. (If applicable) This symbol means the equipment is a Class II or double-insulated electrical appliance. It has been

designed in such a way that it does not require a safety connection to electrical earth.

19. Warning (if applicable): Provide an earthing connection before the mains plug is connected to the mains. When

disconnecting the earthing connection, be sure to disconnect it after pulling the mains plug out from the mains.

20. This apparatus is for professional use only. Intended operational climate: tropical, moderate.

21. When moving or not using the appliance, secure the power cord (e.g., wrap it with a cable tie). Be careful not to damage the

power cord. Before using it again, make sure the power cord has not been damaged. If the power cord has been damaged
at all, bring the unit and cord to a qualified service technician for repair or replacement as specified by the manufacturer.

22. Warning (if applicable): Excessive sound pressure (high volumes) from headphones can cause hearing loss.

23. Warning (if applicable): Please refer to any important information (e.g., electrical, safety, etc.) printed on the exterior

bottom enclosure or rear panel before installing or operating the product.

Service Instructions

• Disconnect power cord before servicing.

• Replace critical components only with factory parts or recommended equivalents.

• For AC line powered units: Before returning repaired unit to user, use an ohmmeter to measure from both AC plug blades

to all exposed metal parts. The resistance should be more than 2,000,000 ohms.

Safety Notices

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
ANY COVER. NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL ONLY.

DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within the equilateral triangle is intended to
alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.

INSTRUCTIONS: The exclamation point within the equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying this appliance.

WARNING: To reduce the risk of fire or electrical shock, do not expose this appliance to rain or moisture. Electrical equipment
should NEVER be kept or stored in damp environments.

CAUTION (for U.S.A. & CANADIAN models only): TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG
WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.

6

NOTICE CONCERNING LASER PRODUCTS: DANGER: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK
FAILED OR DEFEATED. AVOID DIRECT EXPOSURE TO BEAM. USE OF CONTROLS OR ADJUSTMENTS OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

NOTICE CONCERNING FCC REGULATIONS: You are cautioned that changes or modifications not expressly approved by the
part responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures: (a) reorient or relocate the receiving
antenna; (b) move this unit; (c) increase the separation between the equipment and receiver; (d) connect the equipment into an
outlet on a circuit different from that to which the receiver is connected; (e) be sure that all cables are properly shielded, using a
choke or ferrite where appropriate; or (f) consult the dealer or an experienced radio/television technician for help.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.

FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

For Canadian models:

• This device complies with Industry Canada licence-exempt RSSs. Operation is subject to the following two conditions:

(1) this device may not cause interference, and (2) this device must accept any interference, including interference that
may cause undesired operation of the device.

• Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or
lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than
that necessary for successful communication.

• This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by
Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna
impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum
gain indicated for that type, are strictly prohibited for use with this device.

• This unit does not exceed the Class B limits for radio noise emission from digital apparatus set out in the radio
interference regulations of the Canadian Department of Communications.

ESD/EFT Warning: This unit may contain a microcomputer for signal processing and control functions. In very rare
situations, severe interference, noise from an external source, or static electricity may cause it to lock up. In the
unlikely event that this should happen, turn off the unit, wait at least five seconds, and then turn it back on again. The
pins of connectors identified with this ESD warning symbol should not be touched.

For best audio quality, avoid using this device in a high RF-radiated environment. In an environment with radio frequency
interference, the unit may malfunction and resume normal operation after removal of the interference.

For 240-volt use in U.K., use NEMA®-style 240-volt plug. For other countries use proper plug for local outlet.

Double-Insulated: When servicing use only identical replacement parts.

Correct Disposal of This Product: This marking indicates that this product should not be disposed with other

household wastes throughout the EU. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the retailer where the product was
purchased. They can take this product for environmentally safe recycling.

Disposal of Batteries (if applicable):

• Never dispose of any types of batteries in fire or near excessive heat or direct sunlight. Overheated batteries can rupture or explode.

• If you are unsure of how or where to dispose of a battery, refer to your local ordinances for the proper location, method, etc.

• Alkaline batteries & lithium button cell batteries: You can safely dispose of alkaline and lithium button cell batteries

with normal household waste. They do not pose a health or environmental risk during normal use or disposal. (Alkaline
batteries are composed primarily of common metals like steel, zinc, and manganese.)
Do not dispose of large amounts of alkaline or lithium button cell batteries in a group. Used batteries are often not
completely “dead.” Grouping them together can bring these “live” batteries into contact with one another, creating safety
risks. To avoid this, insulate each battery with tape or other non-conductive material to ensure it does not discharge.
Proven cost-effective and environmentally safe recycling processes are not yet universally available for alkaline and
lithium button cell batteries. Some communities offer recycling or collection of these batteries. For more information,
refer to your local ordinances or contact your local government.

• Lead-acid batteries: Dispose of lead-acid batteries by bringing them to an electronic waste center or recycling center,
or dispose of them in accordance with your local ordinances. (Rechargeable lead-acid batteries are the same type used
in automobiles and should be disposed of in a similar fashion.)

California Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and
birth defects or other reproductive harm. (California law requires this warning to be given to customers in the State of California.)

General Note on the Declaration of Conformity: We hereby declare that this device is in
accordance with the essential requirements of the European Directive 1999/5/EC. The full EU
declaration of conformity can be requested at the following address:

7

inMusic GmbH
Harkortstr. 12 - 32
40880 Ratingen
GERMANY

Garantía del producto

1. inMusic Brands, Inc. (“inMusic”) garantiza al comprador original que todos los productos de Denon
Professional (“Denon Pro”) están libres de defectos de material y de mano de obra bajo su uso y
servicio normal por el período que comienza en la fecha de compra en un vendedor autorizado por
Denon Pro y que continúa durante el tiempo que sigue a esa fecha por un (1) año.

2. Esta Garantía Limitada está condicionada al uso adecuado del producto por parte del comprador.
Esta Garantía Limitada no cubre: (a) defectos o daños que resultan de accidentes, el uso incorrecto,

abuso, negligencia, estrés físico o eléctrico fuera de lo común, modificación de cualquier parte del
producto o daño cosmético; (b) equipos que tienen el número de serie retirado o ilegible; (c) todas las
superficies de plástico y otras partes expuestas externamente que han sido rayadas o dañadas debido
a su uso normal; (d) defectos o daños debido a pruebas, operación, mantenimiento, instalación, ajustes
o reparación incorrectos de los productos.

3. Durante el período de garantía aplicable, Denon Pro reparará o cambiará, a su sola discreción, sin
costo para el comprador, cualquier componente defectivo del producto. Denon Pro puede, bajo su sola
discreción, usar repuestos o componentes nuevos, reconstruidos o renovados al reparar cualquier
producto o cambiar un producto con un producto nuevo, reconstruido, renovado o comparable.

4. LAS GARANTÍAS OTORGADAS EN ESTA GARANTÍA LIMITADA, JUNTO CON CUALQUIER OTRA
GARANTÍA IMPLÍCITA QUE CUBRA LOS PRODUCTOS DE DENON PRO, INCLUYENDO PERO NO
LIMITANDO NINGUNA GARANTÍA DE COMERCIO O DE UTILIDAD PARA UN PROPÓSITO EN
PARTICULAR, ESTÁN LIMITADAS A LA DURACIÓN DE ESTA GARANTÍA LIMITADA. SALVO EN LA
MEDIDA EN QUE LO PROHÍBAN LAS LEYES APLICABLES, INMUSIC O DENON PRO NO SERÁ
RESPONSABLE POR NINGÚN DAÑO ESPECIAL, ACCIDENTAL, CONSECUENTE, INDIRECTO O
SIMILAR, PÉRDIDA DE GANANCIAS, DAÑOS A LA PROPIEDAD DEL COMPRADOR O LESIONES AL
COMPRADOR Ó A OTROS RESULTANTES DEL USO, EL USO INCORRECTO O LA INCAPACIDAD DE
USAR UN PRODUCTO DE DENON PRO, INCUMPLIMIENTO DE GARANTÍA O NEGLIGENCIA,
INCLUYENDO PERO NO LIMITADA A LA PROPIA NEGLIGENCIA DE INMUSIC O DENON PRO,
AUNQUE INMUSIC, DENON PRO O SU AGENTE HAYAN SIDO ADEVERTIDOS DE TALES DAÑOS O
POR CUALQUIER DEMANDA PRESENTADA CONTRA EL COMPRADOR POR CUALQUIER OTRA
PARTE. ESTA GARANTÍA LIMITADA ES LA GARANTÍA COMPLETA PARA LOS PRODUCTOS DE
DENON PRO Y SE DA A CAMBIO DE TODAS LAS DEMÁS GARANTÍAS ESCRITAS. ESTA GARANTÍA
LIMITADA NO ALCANZARÁ A NINGUNA OTRA PERSONA QUE NO SEA EL COMPRADOR ORIGINAL
DEL PRODUCTO Y ESTABLECE UNA REPARACIÓN EXCLUSIVA PARA EL COMPRADOR. SI ALGUNA
PARTE DE ESTA GARANTÍA LIMITADA ES ILEGAL O INEXIGIBLE DEBIDO A ALGUNA LEY, TAL
ILEGALIDAD PARCIAL O INEXIGIBILIDAD NO AFECTARÁ AL CUMPLIMIENTO DEL RESTO DE ESTA
GARANTÍA LIMITADA QUE EL COMPRADOR RECONOCE Y RECONOCERÁ SIEMPRE COMO
LIMITADA POR SUS TÉRMINOS O TAN LIMITADA COMO LO PERMITA LA LEY.

Esta Garantía Limitada distribuye el riesgo de fallos del producto entre el comprador y Denon Pro y los precios
de los productos de Denon Pro reflejan esta distribución de riesgos y las limitaciones de las responsabilidades
contenidas en esta Garantía Limitada. Los agentes, empleados, distribuidores y vendedores de Denon Pro no
están autorizados para hacer modificaciones a esta Garantía Limitada o para hacer garantías adicionales
vinculantes para Denon Pro o inMusic. Por lo tanto, las declaraciones adicionales como la publicidad o
presentaciones de los vendedores, sea oral o por escrito, no constituyen garantías por Denon Pro o inMusic y
no debieran ser fiables. Algunas jurisdicciones no permiten limitaciones en cuanto a la duración de una garantía
implícita, por lo que puede que la limitación anterior no le aplique a usted. Esta garantía le otorga derechos
legales específicos y podría también disponer de otros derechos que varían bajo las leyes municipales.

Por favor, escriba el número de serie de su unidad tal y como aparece en la parte trasera del chasis y
también el nombre del vendedor que se lo vendió. Conserve esta información y su recibo de compra
original para su referencia. Visite nuestro sitio Web denonpro.com para registrar su producto.

Modelo: Comprado en:

Número de serie: Fecha de compra:

(para productos adquiridos fuera de EE.UU.)

8

Información sobre devoluciones

• Debe obtenerse un número de autorización de devolución (RMA) del representante local de su

fabricante. Para información sobre su representante, visite denonpro.com.

• Debe incluirse una copia del recibo original para que pueda repararse el equipo en garantía.

• En caso de un equipo defectuoso, este debe ser embalado en su embalaje original.

• Debe incluirse una capa de adicional de embalaje exterior para asegurar la seguridad del producto. En

caso de que no se siga este procedimiento, el equipo podría estar desprotegido en tránsito y, por tanto,
se podría poner en peligro la garantía.

• Denon Pro no aceptará envíos COD (contra reembolso) y no se ofrecerá petición de servicio (call tag)

para mercancías devueltas.

• Denon Pro no devolverá mercancía reparada a los clientes mediante servicio prioritario, a menos que

exista una petición por escrito a expensas del cliente. Las peticiones deben ser dirigidas por escrito
junto con la mercancía devuelta.

• El equipo defectuoso debería ser enviado al servicio de reparación local, con los gastos de transporte

pagados por adelantado junto con un número de autorización de devolución (RMA) impreso con

claridad en el embalaje externo y el recibo de compra original.

Muy importante

Por favor, lea esta sección antes de conectar la unidad con su sistema

Para el funcionamiento óptimo:

• Todos los atenuadores se pueden desgastar. La fuerza excesiva del utilizador puede desgastar

rápidamente el atenuador. Los atenuadores cambiados por el utilizador no son items con garantía.

• Nunca utilice los productos de limpieza en los controles de atenuadores. Los residuos causan la

acumulación excesiva de suciedad y ésto anulará su garantía. Si los controles se hacen amenudo la
unidad puede duran muchos años. Si funcionan incorrectamente (generalmente debido a un ambiente
sucio o polvoriento) consulte a un técnico profesional.

• Sea siempre seguro de que la corriente alterna esté apagada mientras se hace cualquier conexión.

• Utilice los cables adecuados a través de su sistema. No utilice los cables excesivamente largos (por ejemplo

más de 10 metros / 32 pies). Sea seguro que los enchufes están conectados firmemente. Las conexiones
flojas pueden causar un ronquido, ruido o los intermitentes pueden dañar fácilmente sus altavoces. Haga las
conexiónes de entrada y salida con los cables disponibles de estereofonia de bajo-capacitancia. La calidad
del cable hace la gran diferencia en la fidelidad audio y poder. Vea su Denon Pro distribuidor o un
especialista en electrónica o en audio si usted no está seguro de los cables que tiene que utilizar.

• Nunca procure reparar cualquier ajuste con excepción de los escritos en este manual, o lleve la unidad a

su distribuidor o a un centro de servicio autorizado Denon Pro.

• Recuerde siempre: encienda los amplificadores en el último y apaguelos primero. Comience con los

atenuadores principales o los controles de volumen en mínimo y el control(es) del amplificador gain/input
tiene que estar al cero. Espera 8–10 segundos antes de subir el volumen. Esto previene a corrientes
transeúntes que puedan causar un daño grave a los altavoces.

• Utilice con cuidado los controles. Intente moverlos lentamente. Los ajustes rápidos podían dañar el

equipo debido al truncamiento de amplificador.

• Evite el “truncamiento” del amplificador a toda costa: esto ocurre cuando los LED rojos (generalmente en

el panel delantero de la mayoría de los amplificadores de potencia profesionales) comienzan a
parpadear. El “truncamiento” es cuando el amplificador de poder tuerce y funciona más allá de sus
límites. La distorsión dentro del amplificador es la causa principal de la destrucción del altavoz.

• Para prevenir el peligro de fuego o de choque, no exponga la unidad a la lluvia o a la humedad. Nunca

coloque las latas de cerveza, soda, los cristales de agua o cualquier cosa que puede mojar, cerca o
encima de la unidad!

• Las salidas de los auriculares se pueden fijar en niveles que puedan causar daño a sus oídos. Tenga cuidado.

• Este producto puede contener un microprocesador para el procesamiento de las señales y las funciones

de control. En situaciones excepcionales, las interferencias acusadas, el ruido de una fuente externa o la
electricidad estática pueden hacer que se bloquee. En el caso poco probable de que esto suceda,
apagar el producto, esperar cinco segundos y volver a encenderlo.

• En raras circunstancias, si este producto se expone a la interferencia electromagnética durante el uso,

puede producirse una ligera disminución de la relación señal-ruido.

• Ambientes electromagnéticos previstos: residencial, comercial, industria liviana y exteriores urbanos.

9

Instrucciones importantes de seguridad

1. Lea y conserve estas instrucciones. Preste atención a las advertencias y siga todas las instrucciones.

2. No use este equipo cerca de agua.

3. Límpielo sólo con un paño seco.

4. No bloquee las aberturas de ventilación. Instale el equipo de acuerdo con las instrucciones del fabricante. No instale este

equipo en un espacio confinado o “dentro de una caja” tal como una biblioteca o una unidad similar, y mantenga buenas
condiciones de iluminación. No debe impedirse la ventilación cubriendo las aberturas correspondientes (si es aplicable)
con elementos tales como periódicos, manteles, cortinas, etc.

5. No instale el equipo cerca de fuentes de calor tales como radiadores, aberturas de entrada de calefacción, calefactores u

otros aparatos (incluidos amplificadores) que generen calor. No coloque fuentes de llamas vivas tales como velas
encendidas en el aparato.

6. No anule la función de seguridad del enchufe tipo polarizado o con conexión a tierra. Un enchufe polarizado tiene dos

patillas, una más ancha que la otra. Un enchufe de tipo de conexión a tierra tiene dos patillas y una clavija de puesta a
tierra. La patilla ancha o la tercera clavija son para su seguridad. Si el enchufe provisto no entra en su tomacorriente,
consulte a un electricista y solicítele el reemplazo del tomacorriente obsolete.

7. Proteja el cable de alimentación de modo que no lo pisen ni quede estrangulado, particularmente en los enchufes,

tomacorrientes y el punto donde sale del equipo.

8. Use sólo agregados y accesorios especificados por el fabricante.

9. Use sólo el carrito, soporte, trípode, ménsula o mesa especificados por el fabricante o vendidos con el

equipo (si es aplicable). Si usa un carrito, tenga cuidado al mover la combinación de carrito/equipo para
evitar que se vuelque y produzca lesiones.

10. Desenchufe este equipo durante las tormentas eléctricas o cuando no lo use por períodos prolongados.

11. Solicite todo servicio a personal de servicio calificado. Se requiere servicio cuando el equipo se dañó de cualquier

manera, por ejemplo si se dañaron el cable o el enchufe de alimentación, si se derramó líquido o cayeron objetos dentro
del equipo, si el mismo estuvo expuesto a la lluvia o la humedad, si no funciona normalmente o se dejó caer.

12. Suministro eléctrico: Conecte este producto solamente a un suministro eléctrico del tipo que se describe en estas

instrucciones de operación o según se indique en la unidad.

13. Selectores de voltaje interno/externo (si es aplicable): Los conmutadores selectores de voltaje interno y externo, si

existen, solo deben ser reconfigurados y reequipados con un enchufe adecuado para voltaje alternativo por un técnico
cualificado. No intente modificar esto usted mismo.

14. Agua y humedad: Este producto se debe mantener fuera del contacto directo con los líquidos. El aparato no debe ser expuesto

al goteo o a la salpicadura y ningun objeto lleno de líquidos, como serián los floreros, debe ser colocados cerca del aparato.

15. Precaución (si es aplicable): Peligro de la explosión si la batería se substituye incorrectamente. Substituir solamente por

el mismo o el tipo equivalente. Las baterías (un bloque de baterías o una batería instalada) no se deben exponer a calor
excesivo, tal como la luz solar, el fuego, etc.

16. Cuando se usa el enchufe del suministro eléctrico o el acoplador de un artefacto como dispositivo de desconexión, el

mismo debe permanecer listo a operar.

17. Terminal de conexión a tierra de protección (si es aplicable): El artefacto debe conectarse a un tomacorriente del

suministro eléctrico con una conexión a tierra de protección.

18. (Si es aplicable) Este símbolo significa que el equipo es un artefacto eléctrico Clase II o de doble aislamiento. Está

diseñado de manera tal que no requiere una conexión de seguridad a la tierra eléctrica.

19. Precaución (si es aplicable): Antes de conectar el cable de alimentación a la corriente eléctrica, consiga una

conexión a tierra. Además, a la hora de desconectar esta toma de tierra, asegúrese de hacerlo después de haber extraído
el cable de alimentación del chasis.

20. Este aparato es para uso profesional únicamente. Climas de funcionamiento previstos: tropical, moderado.

21. Cuando traslade o no use el artefacto, sujete el cable de alimentación (por ejemplo, envuélvalo con un precinto). Tenga

cuidado de no dañar el cable de alimentación. Antes de usarlo nuevamente, asegúrese de que el cable de alimentación
no esté dañado. Si dicho cable presenta algún daño, lleve la unidad y el cable a un técnico de servicio calificado para
reparación o reemplazo según lo especifique el fabricante.

22. Advertencia (si es aplicable): La presión sonora excesiva (altos volúmenes) de los auriculares puede causar pérdidas de audición.

23. Advertencia (si es aplicable): Antes de instalar u operar el producto, consulte toda la información importante (como la

relativa a electricidad, seguridad, etc.) impresa en la envuelta inferior exterior o el panel trasero.

Las instrucciones de servicio

• Desconecte el cable eléctrico antes de empezar el servicio.

• Substituya los componentes críticos solamente por las piezas de la fábrica o las piezas equivalentes recomendadas.

• Para las unidades accionadas por CA: Antes de devolver la unidad reparada al utilizador, utilice un ohmímetro para medir entre

las dos láminas del enchufe de CA y todas las partes expuestas. La resistencia tiene que ser más de 2,000,000 ohms.

Señales de advertencia

PRECAUCIÓN: PARA REDUCIR EL RIESGO DE DESCARGA ELÉCTRICA NO
QUITE NINGUN TAPADERO. DENTRO DE LA UNIDAD NO HAY COMPONENTES
ÚTILES PARA EL UTILIZADOR. PARA EL SERVICIO SE DEBE DIRIGIRSE
SOLAMENTE AL PERSONAL DE SERVICIO CUALIFICADO.

VOLTAJE PELIGROSO NO AISLADO: La seña de relámpago con la punta de la flecha dentro del triángulo
equilátero está puesto para alertar al utilizador de la presencia del “voltaje peligroso no aislado” dentro del recinto
de producto que puede tener la magnitud suficiente de correr un riesgo de descarga eléctrica.

INSTRUCCIONES: El signo de exclamación, dentro del triángulo equilátero, es para alertar el utilizador de la
presencia de las instrucciones importantes de funcionamiento y de mantenimiento (servicio) en la literatura que
acompaña este dispositivo.

10