Sous Vide
01. Features
1
02. Product Parameters
03. Button Icon Instruction
04. Inkbird Smart APP
(ISV-100W model support)
05. Notes
1
3
5
11
Features
01
Precise Control of Temperature
Precise Control of Time
Dot matrix LCD display, with a recipe to
guide the temperature and time
Intelligent humanization and support
WiFi (ISV-100W)
Warranty: 1 year
Product
Parameters
02
Input power(USA):120v 60Hz
Length of the Cable:1.2m
LCD: (W)36mm*(L)42mm ,128*128 Dot
Matrix LCD
Heating Power:1000W
Temperature Controlling Range:
(77°F～210°F)
Temperature Display Accuracy:0.1℃(1°F )
25ºC~99ºC
11
Temperature Controlling Accuracy:0.1℃
Range of Time Setting:Max 99 hours 59
minutes
Time Setting Minimum Interval:1 minute
Reminder:There will be hint tone when
reaching the target temperature and
temperature control target time；
Water Shortage Protection:When the
water level is lower than the minimum
water level, it will stop working and have
an audible alarm
Temperature Probe Failure Protection:
When the temperature probe fails, it will
stop working and have an audible alarm
Touch control button, easy and conve
nient
Waterproof Level:Non water-proof
03
Button
Icon Instruction
2
Set button :
SET
Quickly press:switch temperature and
time settings, if on the page of recipe
guide and configuration, can be used to
switch options.
Long press (3s):enter the page of recipe
guide; in addition, you can save the configuration and exit on the configuration page.
-/cfg button :
Quickly press:set the temperature and
time for decrement adjustment
Long press (3s):enter the configuration
page, there are temperature unit switching,
meat thickness unit switching, temperature probe correction; when setting
temperature and time, long press can
reduce quickly.
+/ wifi button :
Quickly press:set the temperature and
time for incremental adjustment
Long press (5s):reset wifi(ISV-100W), if
LCD shows that the wifi state is flashing,
3
indicating that the reset is successful;
when setting the temperature and time,
long pressing can adjust quickly.
Run stop button :
Start and stop button, the top left of the
LCD shows the current working state.
Inkbird Smart APP
04
(ISV-100W model support)
4.1. Download the APP
Search the keyword ‘InkbirdSmart ’ in
Appstore or Google Play, or scan the
following QR code to download and
install the APP.
InkbirdSmart
4
4.2. Pair with your phone
1
Open the app, it will ask you to register or
log in your account on the APP. Select the
country and enter your Mobile number or
Email to finish the registration. Then press
“Add Home” button to create your home.
2
Tap “+” or “add device” of the APP to add
the device. in home page
5
3
If the device is in the normal working
state, you can long press 5 seconds to
reset the WIFI. It will enter the Smartconfig
configuration state by default. You can
quickly press to switch the Smartconfig
configuration state and the AP
you change the WIFI
state, it will take
mode. If
about 5 seconds to display the corrspond
ing LCD symbol and state, because of the
WIFI module data processing.
Add device in quick connection:
Plug the device in the socket and make
sure that the device is in the Smartconfig
configuration state (the LCD symbol is
flashing, interval flashing 250ms).
Click “Confirm indicator rapidly blink” and
then select Wi-Fi network, enter Wi-Fi
password,click “confirm” to enter connec
tion process.
The device only supports 2.4GHz Wi-Fi
router.
6
Add device in AP mode:
Plug the device in the socket and make
sure that the device is in the AP Configu
ration State (the LCD symbol is flashing
slowly, interval flashing 1500ms).
Click “AP mode” to enter device adding
interface,click “Confirm indicator slowly
blink” and then select Wi-Fi network, enter
Wi-Fi password,click “confirm” to enter
connection process.
Press “Connect now” and it will go to your
7
WLAN Setting in your smart phone, select
the “SmartLife-XXXX” to directly connect
to the router without putting in password.
Go back to app to enter into the automatic
connection interface.
4
Click “Done” after adding device succeed
ed and enter into device controlling inter
face .
8
5
App icon
recipe
Working status: In
preparation, cooking,
completion, total
three states, in
addition, water level
alarm and probe
alarm will also be
displayed here.
Click on the
configuration page to
switch between
temperature units
and corrected
temperatures.
Device Name
Current
Temperature
Remaining
cooking time
Click to enter
the temperature
setting page.
Click to enter
the setup time
page
Start and stop
button
Note: The water level abnormal alarm, the
temperature probe abnormal alarm, and the
cooking completion all have corresponding
app push prompts.
9
Notes
05
The stainless steel part of the Sous Vide
will get hot when it is used. Before moving,
it is necessary to disconnect the power,
wait for cooling down, and hold the part of
plastic for moving.
The water level should not exceed the
"MAX" scale line of the stainless steel
part. Please disconnect the power when
not in use or before cleaning.
If the Sous Vide falls into the water, please
disconnect the power as soon as possible
to avoid electric shock. If this happens,
please do not try to use the Sous Vide
(water damage does not include warranty).
Don’t use deionized water ( DI water).
10
Loading...