Initial IDM-FD10 Operating Manual
A. SAFETY PRECAUTIONS
The lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of uninsulated "
dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions
in the literature accompanying the product.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:
CAUTION:
CAUTION:
WARNING:
To reduce the risk of fire or electric shock, do not expose this appliance
to rain or moistrue. Dangerous high voltages are present inside the
enclosure. Do not open the cabinet.
To prevent electric shock, match wide blade plug to wide slot, fully insert.
The unit employs a laser system. To ensure the proper use unit, read
this manual carefully and keep it for future reference. If the unit requires
servicing, contact the seller or our service center- see "troubleshooting ". To
prevent direct exposure to the laser radiation, do not open the cabinet. In
visible laser radiation when the cabinet is opened or the interlocks are
defeated. Do not stare into the laser beams.
Use of any controls, adjustments, or procedures other than those specified
herein may result in hazardous radiation exposure.
not for use where video monitor is visible to driver to avoid risk of serious injury
or possible violation of atate laws.
· 1 ·
B. IMPORTANT SAFETY INSTRUCTIONS
(1)Read Instructions - All the safety and operating instructions should be read
before the product is operated.
(2)Retain Instructions - The safety and operating instructions should be retained
for future reference.
(3)Heed Warnings - All warnings on the product and in the operating
instructions should be adhered to.
(4)Follow Instructions - All operating and use instructions should be followed
(5)Cleaning - unplug this product from the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
(6)Attachments - Do not use attachments not recommended by the product
manufacturer as they may cause hazards.
(7)Water and moisture -Do not use this product near water - for example, near
a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or
near a swimming pool; and the like.
(8)Accessories - Do not place this product on an unstable cart, stand, tripod,
bracket, or table. The product may fall, causing serious injury to a child or
adult, and serious damage to the product. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer, or sold with the product.
Any mounting of the product should follow the manufacturer's instructions,
and should use a mounting accessory recommended by the manufacturer.
(9)A product and cart combination should be moved with care. Quick stops,
excessive force and uneven surfaces may cause the product and cart
combination to overturn.
(10)Power Sources - This product should be operated only from the type of
power source indicated on the panel. If you are not sure of the type
of power supply to your home consult your product dealer or local power
company. For products intended to operate from battery power, or other
sources, refer to the operating instructions.
(11)Grounding or Polarization - This product may be equipped with a polarized
alternating-current line plug(a plug having one blade wider than the other).
This plug will fit into the power outlet only one way.This is a safety feature. If
you are unable to insert the plug fully into the outlet, try reversing the plug. If
the plug should still fail to fit, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the polarized plug.
(12)Power- Cord protection - Power-supply cords should be routed so that they
are not likely to be walked on or pinched by items placed upon or against
them, paying particular attention to cords at plugs, convenience receptacles,
and the point where they exit from the product.
· 2 ·
B. IMPORTANT SAFETY INSTRUCTIONS
(13)Lightning - For added protection for this product during a lightning storm, or
when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the anetenna or cable system. This will
prevent damage to the product due to lightning and power-line surges.
(14)Power Lines - An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or power circuits, or
where it can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
(15)Overloading - Do not overload wall outlets, extension cords,or integral
convenience receptacles as this can result in a risk of fire or electric shock.
(16)Object and Liquid Enty - Never push objects of any kind into this product
through result in a fire or electric shock. Never spill liquid of any kind on the
product.
(17)Servicing - Do not attempt to service this product yourself as opening or
removing qualified service personnel.
(18)Damages Requiring Service - Unplug this product from the wall outlet and
refer servicing to qualified service personnel under the following conditions.
a) When the power- supply cord or plug is damaged.
b) If liquid has been spilled , or objects have fallen into the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the operating
instructions as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to its normal operation.
e) If the product has been dropped or damaged in any way.
f) When the product exhibits a distinct change in performance - this
indicates a need for service.
(19)Replacement parts - When replacement parts are required, be sure the
service technician has used replacement parts specfied by the
manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other
hazards.
(20)Safety Check - Upon completion of any service or repair to this product, ask
the service technician to perform safety checks to determine that the
product is proper operating condition.
(21)Heat - The product should be situated away from heat sources such as
radiators, heat registers, stoves or other products(including amplifiers)that
product heat.
· 3 ·
TABLE OF CONTENTS
SAFETY PRECAUTIONS
A.
IMPORTANT SAFETY
B.
INSTRUCTIONS
FEATURES
C.
ABOUT MANUAL
D.
PLAYABLE DISCS
E.
TERMS FOR DISCS
F.
BEFORE OPERATION
G.
PRECAUTIONS FOR DISCS
H.
PREPARATIONS BEFORE
I.
OPERATION
CHECK ACCESSORIES
USE REMOTE CONTROL
MAIN UNIT
NAMES AND LAYOUT OF REMOTE
CONTROLS
CONNECTIONS
BASIC OPERATIONS
J.
LCD SCREEN ADJUSTMENT
LAMP L AND LAMP R
HOW TO RECEIVE AUDIO SIGNALS
PLAY DISCS
PAUSE
OSD
………………………………
DVD MENU PLAY
SELECT WITH NUMBER BUTTONS
……………………
……………………………
……………………………
…………………………
…………………………
…………………………
………………………………
……………
………………………
………………………
……………………
…………………
…………
…………
…………
…………………
……………
……………
…………………
11-12
……
…
15-18
…
2-3
10
13
13
13
13
14
14
18
19
K.
1
4
5
5
6
7
7
8
8
8
9
MENU SETUP
MENU SETTING
PLAY DISCS IN
L.
VARIOUS WAYS
AUDIO MODE
MUTE
FAST PLAY
SLOW PLAY
REPEAT PLAY
SELECT SUBTITLES
SELECT ANGLES
PLAY MP3 DISCS
M.
OTHERS
N.
TROUBLE SHOOTING
TECHNICAL SPECIFICATIONS
INSTALLATION
O.
………………………
………………
……………………
……………………
……………………………
………………………
……………………
…………………
……………
………………
……………………
……………………………
…………
………………………
19
19-24
25
25
25
26
26
26
27
27
28
29
29
…
30
31
· 2 ·
C. FEATURES
1. HIGH DEFINITION
The unit adopts MPEG2 coding format and
brings the horizontal resolution over
500 lines.
2. UNIQUE FUNCTIONS
Multi-angle and multi-language bring
unique trick functions.
parental lock makes it easy to control the
content of discs.
3. LCD SCREEN
The IDM-FD10 is capable of displaying Full
Screen (4:3) and Wide Screen (16:9) media.
4. COMPATIBILITY
The unit can play DVD, CD and MP3
discs.
5. MULTI-FUNCTIONS
Fast forward, fast reverse, slow play, frame
play , repeat play.
This product incorporates copyright protection technology that is protected by method claims
of certain U .S. patents and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright protection technology must be
authorized by Macrovision Corporation, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
· 4 ·
D. ABOUT MANUAL
PRINCIPLES FOR WRITING
This manual mainly introduces how to
use the buttons on the remote control.
You may operate the unit if the buttons
on the unit have the same or similar
names as to those on the remote
control.
The marks shown in the right chart are
used in the manual.
" " may appear on the TV screen
during operation. This icon means the
function explained in the owner's
manual is not available on that disc.
E. PLAYABLE DISCS
MARK
DVD
CD
INDICATION
functions of DVD
functions of CD
TYPE
DVD
CD
MP3
Note: Region codes for DVD disc are printed on the rear panel, only the disc with
same code can be played.
MARK CONTENT SIZE PLAYING TIME
audio+video
(motion pictures)
audio
audio
· 5 ·
12cm
12cm
12cm
approx. 2hrs (single-side disc)
approx. 4hrs (double-side disc)
approx. 74mins
600mins
F. TERMS FOR DISCS
TITLE
The images or music of a DVD are divided
into some units, among which title is the
biggest one.
To an image in video software, title is movie;
to a piece of music in audio software, it is
music.
Each title has an indication number which
makes it easy to locate.
CHAPTER
It is smaller than title among the units
of a DVD. A title is made up of several
chapters, and each chapter has a number
for search. But some discs may not have
numbered chapters.
TRACK
The music in a CD. Each track has a
number for search.
STRUCTURE OF DVD
DISK
TITLE
CHAPTER
STRUCTURE OF CD
DISK
TRACK
· 6 ·
G. BEFORE OPERATION
WHEN DRIVING
Keep the volume level low enough to be
aware of road and traffic conditions.
WHEN CAR WASHING
Do not expose the product to water or
excessive moisture. This could cause
electrical shorts, fire or other damage.
WHEN PARKED
Parking in direct sunlight can produce very
high temperatures inside your vehicle.
Give the interior a chance to cool down
before starting playback.
PLACEMENT
Put the unit where ventilation is good
enough to prevent overheating.
Never put the unit in direct sunlight or near
heat sources.
Put the unit horizontally, never put any
heavy object on the unit.
To protect the laser, do not put the unit
where there is most dust. If there is dust
on the laser, use a cleaning disc to clean it.
Refer to the operation instructions of
the cleaning disc you bought.
CONDENSATION
Water will appear on the pickup lens in
the following cases:
The unit is suddenly moved from a cold
place to a warm place.
The unit is put in a room with a heater, or
in the cold air from a air-conditioner.
Use the unit in a humid place. In these
cases, the unit can not work. Unload the
disc and leave the unit on for about
one hour to evaporate the water.
CLEANING
Use soft cloth with a little neutral
detergent to wipe the cabinet, panel and
controls. Never use abrasive pater,
polishing powder or solvent like alcohol
and gasoline.
H. PRECAUTIONS FOR DISC
HANDLING DISC
To keep the disc clean, do not touch
the play sides of the disc.
Do not attach paper or tape to the disc.
Keep the disc away from direct sunlight
or heat sources.
Store the disc in a disc case after
playback.
CLEANING DISC
Before playback, wipe the disc outwards
from the center with clean cloth.
Do not use any type of solvent such as
thinner, benzine, commercially available
cleaners or antistatic spray.
· 7 ·
I. PREPARATIONS BEFORE OPERATION
This part introduces the work to be done before operating the unit.
CHECK ACCESSORIES
Check if you have all the accessories after the carton is opened.
Power supply cord 1
AV output cables 1
AV input cables 1
Lamps 2
Remote control 1
AAA batteries 2
USE REMOTE CONTROL
User manual 1
Mounting fittings 1
4.5m RCA-RCA AV cables 2
1.5m RCA-RCA AV cables 1
Warranty card 1
Installation accessories 1
1.Refer to the diagram, open the battery compartment of the remote control, insert batteries,
then close the compartment.
2.To use the remote control, point it at the remote sensor of the unit, operate in the range of 5
meters and 60°.
3.Generally, batteries last for about one year, replace the batteries if the remote control does
not work.
4.Remove the batteries if remote control is not used for a long time.
· 8 ·
I. PREPARATIONS BEFORE OPERATION
Main Unit
1
2 3 4 5 6 7 8 9
10
12
11
1. POWER
2. REMOTE SENSOR
3. DISC SLOT
4. PREVIOUS SKIP
5. NEXT SKIP
6. STOP
7. PLAY
8. EJECT
9. PAUSE
14
13
15 161718
10. LAMP L and LAMP L Switch
11. LAMP R and LAMP R Switch
12. Wireless Headphone Signal
Transmitter/ FM Signal Transmitter
13. Indicate Light
14. SOURCE Button
15. MENU Button
16. DOWN/UP Buttons
17. FM-TX Buttons
18. Reset Button
· 9 ·
Loading...