Soft Camera Pack
ENGLISH
1. Camera appearance and key-press
1
3
2
4
1 Viewfinder window 9 Shuer
2 Display screen 10 Baery cover
3 USB interface 11 Tripod jack
4 Tripod jack 12 USB interface
5 Baery cover 13 Lens
6 Playback 14 Viewfinder window
7 Up key 15 Shuer
8 Menu playback key
9
8
7
6
5
15
10 11
14
12
13
1
2. Start to use
2.1 Baery installaon
Open the baery cover follow the picture below, mount two AAA (LR03) alkaline baeries
according to the correct direcon (there are + - polarity hints inside the metal sheet of the
baery cover), then close the baery cover. Then press Power/Menu key to start up.
Aer starng up, if the camera sengs will be changed, please refer to the content of this
manual.
Note: the pictures in the camera will be lost once taking out o f baery; please download the files in
the camera to your computer immediately before replacing baery or when it is not in use.
2. 2 Picture taking
Aer starng up, press the Shuer key and the camera will release the sound of “beep”, a
picture will be shot then. The numbers on the screen of camera will be reduced. If the
environment source is too dark, there will be two alarms successively,
taking is prohibited.
which means picture
2
2.3 Sleep mode (automatic shutdown-power saving mode)
The camera will enter sleep mode automatically if there
is no operation for successive 30 seconds.
Press Power/Menu key for 3 minutes and the camera
will enter sleep mode.
Under sleep mode, the camera consumes very little po wer.
Please press Power/Menu key to exit sleep mode.
2.4 Switching function mode
Press Power/Menu key to display menu interface and then press Up key for selection. Press
Shutter key to come into the menu of next level or switch. The icon and interface displayed on
the screen are illustrated as follows:
Icon Mode
Picture taking
Shooting mode
Delay for self-portrait
3
Select resolution
Icon Mode
Record short video
Connuous shoong
5M,2592×1944
VGA,640×480
QVGA,320×240
4
Compression ratio
Power frequency
Icon Mode
Without compressing mode
Compressing mode
Icon Mode
50Hz
60Hz
5
Electric quantity of battery
Delete all
Icon Electric quantity
>70%
>35%
>5%
<=5%
6
2.5 Self-portrait/record AVI short video/continuous shooting mode
Press Power/Menu key once and select the first icon, then press Shutter key to switch among
“single shooting-->self-portrait-->record AVI short video-->continuous shooting” mode. Press
Power/Menu key again to enter selected mode.
Self-portrait Record AVI short video Continuous shooting
2.6 Resolution setting
Press Power/Menu key and Up key until the resolution icon is selected. Then press Shutter key
to select, and press Power/Menu key to enter the selected mode.
Remark: switching the camera to high-resolution mode can make pictures clear; if you want to
take more pictures, please set the machine to low resolution mode.
2.7 Compression ratio setting
Press Power/Menu key and Up key until the compression ratio icon is selected, then press
Shutter key to select, moreover, press Power/Menu key to enter the selected mode.
Remark: setting the camera under without compression mode can make picture clear.
7
rowse the content of optical disk
2.8 Power frequency setting
Press Power/Menu key and Up key until the power frequency icon is selected. Then press
Shutter key to select 50Hz or 60Hz (consistent with the local AC power frequency), press
Power/Menu key to enter the selected mode.
2.9 Delete all the files in camera (formatting)
Press Power/Menu key and Up key until the delete all icon is selected. Then press Shutter key to
get into enter menu, moreover, press Up key for selection and finally press Shutter key for
confirmation.
3. Software installation
Insert the attached optical disk to the optical drive in computer and the install navigation
program will operate automatically, moreover, install navigation window will appear then. There
are 4 key-presses in the navigation window:
Install PhotoI mpression picture editing software
Install the driver of camera
B
Exit
8
3.1 Camera driving installation
Click button <Install Driver> and finish installation step by step according to the hints.
Please restart the computer after finishing installation.
Note: it is prohibited to connect the camera with the computer before installing the driving to
avoid error of driving installation.
3.2 ArcSoft PhotoImpression picture editing software installation
Click button <Install PhotoImpression> and install according to the hints, please restart the
computer after finish installation.
3.3 Picture download
USB wire is adopted to connect the camera to the available USB interface of the computer, then
double click “My DSC” icon in “Dual Mode camera” folder on the desktop to open the download
window.
9
Click button “picture download” and the file in camera will display in the window in form
of small figure. Click the small figure with the right key of mouse to amplify the display, then click
the amplified or reduced display window with the right or left key.
Click button “select all the pictures”
the files to the computer.
and then click button “picture storage” to store
10
3.4 Storage of interpolation pictures with 5.20 million pixels
A: Before storage, click image adjustment button ;
B: Select “digit amplification” option and then confirm.
C: Then the pictures with VGA format can be downloaded as
interpolation pictures with 5.20 million pixels as the
description above.
3.5 Establishment and storage of AVI short video
As using the function of recording AVI short video, the
recorded short video can be stored to the computer upon the download method described
above, then Windows player can be adopted to play.
3.6 Camera is utilized as camera
After camera driver is installed in the computer, the camera can act as camera after connecting
with the computer to facilitate network conference or video chat.
Note: camera function is not allowed to use when downloading pictures; please do not open
download window when the camera is used as the camera.
3.7 Arcsoft PhotoImpression software application
If the Photoimpression picture editing software is operated, it is ok to double click icon
or select Photoimpression 5 from start→ all program →ArcSoft Photoimpression 5 If the
detailed using method about PhotoImpression is needed, please refer to the help in software.
11
4. Answer Your Quesons
Failure to start up by pressing the power key
--The electric quanty of power is too low, please change baery. Please noce to ulize the
alkaline baery.
Failure to download pictures
--Restart the computer and reconnect to download.
--Ensure that the camera driver is in normally installed.
--If the driver has been installed, please ensure that no soware is using the camera funcon. If
oblem sll exits, please unload the driving first and then reinstall and restart the
the pr
computer.
5. Specificaon parameter
-cmos image sensor 5MPX interpolated with 1.3 million pixels
- 8MB built-in SDRAM accumulator
-1.44'' display screen
-USB power supply, 2 AAA(LR03) alkaline baeries for power supply
-Taking pictures, recording short videos, camera funcon
-Delay for self-portrait, automac shutdown (sleep mode)
-Picture resoluon: 1280×1024 pixel (1.3M), 2592*1944 （5MPX interpolated）
12
640 X 480 pixel (VGA)
320 X 240pixel (QVGA)
-Storage volume: 1.3 M format 15 pictures (30 for compression mode)
VGA format 46 pictures (70 for compression mode)
QVGA format 100 pictures (138 for compression mode)
-File format: picture-JPEG
Short video-AVI
-Fittings: USB wire, ArcSoft PhotoImpression picture editing software, manual
-Operation system supported: Microsoft Windows 2000, XP, VISTA, 7
6. Required operation system:
Pentium II or processor with a higher performance
Windows 2000/ XP/VISTA operation system
More than 128 MB memory
Hard disk free space of more than 500MB
CD-ROM optical drive
Color display (not less than 800x600 resolution, 24 digits)
USB interface
13
Warning
1. Before taking pictures, please try to take several pictures first to ensure that the camera is
in normal working condition. The company is not responsible for any loss rising from
camera fault.
2. Strong electrostatic will influence the normal application of the camera; under such
circumstances, please cut off the power and restart.
DISPOSAL
Electrical and electronic equipment (EEE) contains materials, parts and substances
which can be dangerous to the environment and harmful to human health if waste
of electrical and electronic equipment (WEEE) is not disposed of correctly.
Equipment, which is marked with the WEEE logo (as shown on the left), should not
be thrown away with your household waste. Contact your Local Authority Waste
Disposal Department as they will be able to provide details of the recycling options
available in your area.
www.ingodevices.com
14
Loading...