Inglis IVP85803, IVP85802, IVP85800, IVP33801, IVE82303 Owner’s Manual

...
THANK YOU for purchasing this high-quality product. If you should experience a problem not covered inTROUBLESHOOTING,
please visit our website at www.inglis.ca for additional information. If you still need assistance, call us at 1-800-807-6777.
You will need your model and serial number located on the oven frame behind the storage drawer panel.
TableofContents
RANGE SAFETY ....................................................................................... 2
The Anti-Tip Bracket ............................................................................. 2
FEATURE GUIDE ..................................................................................... 4
COOKTOP USE ........................................................................................ 5
OVEN USE ................................................................................................ 5
Electronic Oven Controls ...................................................................... 5
Aluminum Foil........................................................................................ 6
Positioning Racks and Bakeware ......................................................... 6
Oven Vent .............................................................................................. 6
Baking and Roasting ............................................................................. 7
Broiling .................................................................................................. 7
RANGE CARE ........................................................................................... 7
Self-Cleaning Cycle ............................................................................... 7
General Cleaning ................................................................................... 8
Oven Light ............................................................................................. 9
Appliance Outlets .................................................................................. 9
TROUBLESHOOTING .............................................................................. 9
W10204317B
RANGESAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
h_ Als' ii4i!ipB _sc/,{@
The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without the anti- tip bracket fastened down properly.
Anti-Tip Bracket
Range Foot
Tip Over Hazard
A child or adult can tip the range and be killed. Connect anti-tip bracket to rear range foot.
Reconnect the anti-tip bracket, if the range is moved. See the installation instructions for details. Failure to follow these instructions can result in death or serious burns to children and adults.
Making sure the anti-tip bracket is installed:
Slide range forward.
Look for the anti-tip bracket securely attached to floor.
Slide range back so rear range foot is under anti-tip bracket.
iMPORTANT SAFETY iNSTRUCTiONS
WARN(NG: To reduce the risk of fire, electrical shock,
injury to persons, or damage when using the range, follow
basic precautions, including the following: [] WARNING: TO REDUCE THE RISK OF TIPPING OF
THE RANGE, THE RANGE MUST BE SECURED BY PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK
IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET
SECURELY ATTACHED TO FLOOR, AND SLIDE RANGE BACK SO REAR RANGE FOOT IS UNDER ANTI-TIP
BRACKET.
[] CAUTION: Do not store items of interest to children in
cabinets above a range or on the backguard of a range - children climbing on the range to reach items could be seriously injured.
[] Proper Installation - Be sure the range is properly installed
and grounded by a qualified technician.
[] Never Use the Range for Warming or Heating the Room. [] Do Not Leave Children Alone - Children should not be left
alone or unattended in area where the range is in use. They should never be allowed to sit or stand on any part of the range.
[] Wear Proper Apparel- Loose-fitting or hanging garments
should never be worn while using the range.
[] User Servicing - Do not repair or replace any part of the
range unless specifically recommended in the manual. All other servicing should be referred to a qualified technician.
[] Storage in or on the Range - Flammable materials should
not be stored in an oven or near surface units.
[] Do Not Use Water on Grease Fires - Smother fire or flame
or use dry chemical or foam-type extinguisher.
[] Use Only Dry Potholders - Moist or damp potholders on
hot surfaces may result in burns from steam. Do not let potholder touch hot heating elements. Do not use a towel or other bulky cloth.
[] DO NOT TOUCH SURFACE UNITS OR AREAS NEAR
UNITS - Surface units may be hot even though they are dark in color. Areas near surface units may become hot enough to cause burns. During and after use, do not touch,
or let clothing or other flammable materials contact surface units or areas near units until they have had sufficient time to cool. Among those areas are the cooktop and surfaces
facing the cooktop.
[] Use Proper Pan Size - The range is equipped with one or
more surface units of different size. Select utensils having flat bottoms large enough to cover the surface unit heating
element. The use of undersized utensils will expose a portion of the heating element to direct contact and may result in ignition of clothing. Proper relationship of utensil to
burner will also improve efficiency.
[] Never Leave Surface Units Unattended at High Heat
Settings - Boilover causes smoking and greasy spillovers that may ignite.
[] Make Sure Reflector Pans or Drip Bowls Are in Place -
Absence of these pans or bowls during cooking may subject wiring or components underneath to damage.
[] Protective Liners - Do not use aluminum foil to line surface
unit drip bowls or oven bottoms, except as suggested in
the manual. Improper installation of these liners may result
in a risk of electric shock, or fire.
[] Glazed Cooking Utensils - Only certain types of glass,
glass/ceramic, ceramic, earthenware, or other glazed utensils are suitable for range-top service without breaking
due to the sudden change in temperature.
[] Utensil Handles Should Be Turned Inward and Not Extend
Over Adjacent Surface Units - To reduce the risk of burns,
ignition of flammable materials, and spillage due to unintentional contact with the utensil, the handle of a utensil should be positioned so that it is turned inward, and
does not extend over adjacent surface units.
[] Do Not Soak Removable Heating Elements - Heating
elements should never be immersed in water.
[] Do Not Cook on Broken Cooktop - If cooktop should
break, cleaning solutions and spillovers may penetrate the broken cooktop and create a risk of electric shock. Contact
a qualified technician immediately.
[] Clean Cooktop With Caution - If a wet sponge or cloth is
used to wipe spills on a hot cooking area, be careful to avoid steam burn. Some cleaners can produce noxious
fumes if applied to a hot surface.
[] Use Care When Opening Door - Let hot air or steam
escape before removing or replacing food.
[] Do Not Heat Unopened Food Containers - Build-up of
pressure may cause container to burst and result in injury. [] Keep Oven Vent Ducts Unobstructed. [] Placement of Oven Racks - Always place oven racks in
desired location while oven is cool. If rack must be moved
while oven is hot, do not let potholder contact hot heating
element in oven. [] DO NOT TOUCH HEATING ELEMENTS OR INTERIOR
SURFACES OF OVEN - Heating elements may be hot even
though they are dark in color. Interior surfaces of an oven
become hot enough to cause burns. During and after use,
do not touch, or let clothing or other flammable materials
contact heating elements or interior surfaces of oven until they have had sufficient time to cool. Other surfaces of the
appliance may become hot enough to cause burns - among
these surfaces are oven vent openings and surfaces near these openings, oven doors, and windows of oven doors.
For self-cleaning ranges - [] Do Not Clean Door Gasket - The door gasket is essential
for a good seal. Care should be taken not to rub, damage,
or move the gasket. [] Do Not Use Oven Cleaners - No commercial oven cleaner
or oven liner protective coating of any kind should be used
in or around any part of the oven. [] Clean Only Parts Listed in Manual. [] Before Self-Cleaning the Oven - Remove broiler pan and
other utensils. For units with ventilating hood -
[] Clean Ventilating Hoods Frequently - Grease should not
be allowed to accumulate on hood or filter. [] When flambeing foods under the hood, turn the fan on.
SAVE THESE INSTRUCTIONS
FEATUREGUIDE
This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or the Customer Care section of our website at www.inglis.ca for more detailed instructions.
OVEN CLOCK LIGHT
SELF TIMER
CLEAN
Clean
Bake [ Timer
Broil
@ @
KEYPAD FEATURE INSTRUCTIONS
OVEN LIGHT Oven cavity light While the oven door is closed, press OVEN LIGHT to turn the light on and off. The oven light will
CLOCK Clock
TIMER Oven timer
come on when the oven door is opened. The oven light will not come on during the Self-Clean cycle.
The Clock uses a 12-hour cycle with a.m. and p.m.
1. Check that the oven is off.
2. Press CLOCK.
3. Press TEMP/TIME %" or "-" arrow pads to set the time of day, including a.m. or p.m.
4. Press CLOCK or START. The Timer can be set in hours or minutes up to 12 hours and 59 minutes.
1. Press TIMER.
2. Press TEMP/TIME "+" or "-" arrow pads to set the length of time.
3. Press START to begin the countdown. If enabled, end-of-cycle tones will sound at end of
countdown,
4. Press TIMER twice to cancel the Timer. Do not press the CANCEL/OFF keypad because the
oven will turn off.
5. If the Timer is running, but not in the display, press TIMER to display the countdown for
5 seconds.
sIAR7
Q OFF
A
TEMP/TIME
V
BAKE Baking and 1. Press BAKE.
roasting 2. Press TEMP/TIME %" or "-" arrow pads to set a temperature other than 350°F (175°C) in
5° increments between 170°F and 525°F (75°C and 275°C).
3. Press START.
4. To change the temperature repeat Step 2. Press START or wait 5 seconds for the change to
take effect.
5. Press CANCEL!OFF when finished.
BROIL Broil ng Position c0okwa[e in oven and close dooi to broil Stop position: The do0r shoUid remain open
START Cooking start
Oven control
lockout
approximately 5 (1217cm).
2. Press BROIL:
&Press TEMP/TIME + or ; arrowpads to change the temperature in5°F(5_C)increments
between 300_F and 525°F (150°C and 275°C).
4. Press START.
5. Press CANCEL!OFF When finished.
The Start pad begins any oven function. If Start is not pressed within 5 seconds, "PUSH?" or
"PSH" appears inthe display. If Start is not pressed within 1 minute after pressing a keypad, the
function is canceled and the time of day is displayed.
1. Check that the oven is off.
2. Press and hold the START keypad for 3 seconds.
3. A tone will sound, and "Loc" will be displayed.
4. Repeat to unlock. Only the CLOCK, OVEN LIGHT, and TIMER keypads will function with the
controls locked.
KEYPAD FEATURE INSTRUCTIONS
CANCEL/OFF Range function The CanCe!!off keYpad stops any function except the C!ock, Timer, and Oven Contro! LockoUt. TEMP/TIME
Temperature and The "+" or "-" arrow pads are used to adjust time and temperature settings. time adjust
COOKTOP USE
Hot Surface Indicator Light (on some models)
On ceramic glass models, the hot surface indicator light is located on the console panel.
The hot surface indicator light will glow as long as any surface cooking area is too hot to touch, even after the surface cooking area is turned off.
Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
The control knobs can be set to anywhere between HI and LO.
Push in and turn to setting.
REMEMBER: When range is in use or (on some models) during the Self-Cleaning cycle, the entire cooktop area may become hot.
Ceramic Glass (on some models) The surface cooking area will glow red when an element is on. It
may cycle on and off to maintain the selected heat level.
Use cookware about the same size as the surface cooking area.
Cookware should not extend more than 1/2"(1.3 cm) outside the area.
Cleaning off the cooktop before and after each use will help keep it free from stains and provide the most even heating.
Cooktop On Indicator Light (on some models)
The Cooktop On indicator light is located on the console panel. When any control knob on the console panel is turned on, the Cooktop On indicator light will glow.
Coil Elements and Burner Bowls (on some models)
Coil elements should be level for optimal cooking results. Burner bowls, when clean, reflect heat back to the cookware. They also
help catch spills. Cookware should not extend more than 1/2"(1.3 cm) over the coil
element. If cookware is uneven or too large, it can produce excess heat, causing the burner bowl to change color.
Dual Cooking Zone (on some models) The Dual Cooking Zone offers flexibility depending on the size of
the cookware. Single size can be used inthe same way as a regular element. The dual size combines both the single and outer element
and is recommended for larger size cookware.
oo0
DUAL 0 0 SINGL!
A. Dual
B. Single
OVEN USE
Odors and smoke are normal when the oven is used the first few times, or when it is heavily soiled.
Control Display
The display will flash when powered up or after a power loss. Press CANCEL/OFF to clear. When oven is not in use the time of day is displayed. Indicator lights show functions that are in use.
Tones
Tonesare audible signals, indicating the following:
Basic Functions
One tone
Valid pad press
IMPORTANT: The health of some birds is extremely sensitive to the fumes given off. Exposure to the fumes may result in death to
certain birds. Always move birds to another closed and well- ventilated room.
Oven is preheated (long tone)
Function has been entered
Reminder (on some models), repeating each minute after the end-of-cycle tones
Three tones
Invalid pad press
Four tones
End of cycle
Fahrenheit and Celsius
The temperature is preset at Fahrenheit, but can be changed to Celsius.
To change: Press and hold BROIL for 5 seconds. A tone will sound, and "°C" or "°F" will appear on the display. Repeat to
change back. To exit mode, press CANCEL/OFR
Oven Temperature Control
IMPORTANT: Do not use a thermometer to measure oven
temperature because opening the oven door may cause element cycling to give incorrect readings.
The oven provides accurate temperatures; however, it may cook faster or slower than your previous oven, so the temperature
calibration can be adjusted. It can be changed in Fahrenheit or Celsius.
To Adjust Oven Temperature Calibration:
1. Press and hold BAKE for 5 seconds until the oven display
shows the current calibration, for example "0°F CAL" or "00."
2. Press the TEMP/TIME "+" or "-" arrow pads to increase or to decrease the temperature in 10°F (5°C) amounts. The adjustment can be set between 30°F (15°C) and -30°F (-15°C).
3. Press START.
Options Mode
Press and hold TIMER for 5 seconds, and "Opt" will appear. Use the TEMP/TIME keys to cycle through the following options. Press
CANCEL to exit the mode.
End of Cycle Tones
"bl" (beep once) or "b" (continue to beep) will be displayed. Press TIMER to toggle through selection.
12-Hour Shutoff
If "12 Hr" is displayed, the oven will automatically shut off after 12 hours. Press TIMER to toggle to "- Hr" to disable the 12-hour
shutoff.
Oven Light with Door Open
"LOn" indicates that the oven light will turn on when the door is open. If "LOFF" is displayed, the oven light will turn on only with the oven light switch. Press TIMER to toggle through selection.
IMPORTANT: To avoid permanent damage to the oven bottom
finish, do not line the oven bottom with any type of foil, liners or cookware.
IMPORTANT: To avoid permanent damage to the porcelain finish,
do not place food or bakeware directly on the oven door or bottom.
Bakeware
To cook food evenly, hot air must be able to circulate. Allow 2" (5 cm) of space around bakeware and oven walls. Make sure
that no bakeware piece is directly over another.
Racks
Position racks before turning on the oven.
Do not move racks with bakeware on them.
Make sure racks are level. To move a rack, pull it out to the stop position, raise the front edge,
and then lift out. Use the following illustration and charts as a guide.
5 _,,_,,!
2............]
For best cooking results, do not cover entire oven rack with foil because air must be able to move freely.
c nd B<xk
Rack Positions
Rack 5: Toasting bread or broiling thin, non-fatty foods. Rack 4: Use for 2-rack baking and broiling. Rack 3: Most baked goods on a cookie sheet or jelly roll pan, layer
cakes, frozen convenience foods. Broiling chicken pieces. Rack 2: Roasting small cuts of meat, pies, casseroles, bundt
cakes, and 2-rack baking. Rack 1: Roasting large cuts of meat and poultry.
Multiple Rack Cooking
2-rack: Use rack positions 2 and 4.
Baking Layer Cakes on 2 Racks
For best results when baking cakes on 2 racks use racks 2 and 4 for baking. Place the cakes on the racks as shown.
A. Oven vent (ceramic glass model)
0 v en
The oven vent releases hot air and moisture from the oven, and should not be blocked or covered. Blocking or covering the vent
will cause poor air circulation, affecting cooking and cleaning results. Do not set plastics, paper or other items that could melt or
burn near the oven vent. On coil element models, the element can be used when the oven is
in use as long as the cookware does not extend more than 1/2"(1.3 cm) over the element.
A. Oven vent (coil element model)
The bake and broil burners cycle on and off in intervals. This feature is automatically activated when the oven is in use.
Before baking and roasting, position racks according to "Positioning Racks and Bakeware" section. When roasting, it is not
necessary to wait for the oven preheat cycle to end before putting food in unless it is recommended in the recipe.
Preheating
After START is pressed, the oven will display "PrE" until the temperature is above 170°F (75°C). Once 170°F (75°C) is reached,
the display temperature will increase as the actual temperature of the oven increases. When the preheat temperature is reached, a
tone will sound, and the selected temperature will appear on the display.
Broiling uses direct radiant heat to cook food. Changing the temperature when Custom Broiling allows more precise control when cooking. The lower the temperature, the slower the cooking. Thicker cuts and unevenly shaped pieces of meat, fish and poultry
may cook better at lower broiling temperatures.
For best results, use a broiler pan and grid. It is designed to
drain juices and help avoid spatter and smoke. Ifyou would like to purchase a broiler pan, one may be ordered.
Please refer to the cover for contact information. Ask for Part Number 4396923.
RANGECARE
Burn Hazard
Do not touch the oven during the Self-Cleaning cycle. Keep children away from oven during
Self-Cleaning cycle. Failure to follow these instructions can result in burns.
IMPORTANT: The health of some birds is extremely sensitive to the fumes given off during the Self-Cleaning cycle. Exposure to the fumes may result in death to certain birds. Always move birds to
another closed and well-ventilated room.
Do not block the oven vent(s) during the Self-Cleaning cycle. Air must be able to move freely. Depending on your model, see "Oven
Vent" section.
Do not clean, rub, damage or move the oven door gasket.
Prepare Range
Remove the broiler pan, grid, cookware and bakeware, all
cooking utensils, oven racks and aluminum foil and, on some models, the temperature probe from the oven.
Use a damp cloth to clean inside door edge and the 1W' (3.8 cm) area around the inside oven cavity frame, being certain not to move or bend the gasket.
Remove plastic items from the cooktop because they may melt.
Remove all items from the storage drawer.
It is not necessary to preheat the oven before putting food in unless recommended in the recipe. Position food on grid in a broiler pan, then place it in the center of the oven rack. Close the door to the broil stop position to ensure proper broiling temperature.
How the Cycle Works IMPORTANT: The heating and cooling of porcelain on steel in the
oven may result in discoloring, loss of gloss, hairline cracks and popping sounds.
Before self-cleaning, make sure the door is completely closed or the door will not lock and the self-cleaning cycle will not begin.
Once the oven has completely cooled, remove ash with a damp cloth. To avoid breaking the glass, do not apply a cool damp cloth
to the inner door glass before it has completely cooled. Tostop the self-cleaning cycle at anytime, press CANCEWOFE If
the temperature is too high the oven door will remain locked and "cool" and "locked" will be displayed.
The oven light will not function during the self-cleaning cycle.
Electronic Oven Control with Adjustable Self-Clean (HI- LO)
The self-cleaning cycle can be set at HI self-clean time (4 hours 30 minutes) or LO self-clean time (3 hours 30 minutes). The
suggested clean times are 3 hours 30 minutes for light soil, or 4 hours 30 minutes for heavy soil. The last 30 minutes of the cycles
is for cool down.
To Self-Clean:
1. Press SELF CLEAN to set the clean time to HI (4 hours 30 minutes).
2. Press the TEMP/TIME "+" or "-" arrow pads to cycle between LO and HI clean time.
3. Press START. The oven door will automatically lock. The CLEAN indicator
light will be displayed. The time remaining will also be displayed.
4. When the self-clean cycle is complete and the oven cools, the CLEAN indicator light will turn off.
5. When the oven is completely cooled, remove ash with a damp cloth.
IMPORTANT:Beforecleaning,makesureallcontrolsareoffand theovenandcooktoparecool.Alwaysfollowlabelinstructionson cleaningproducts.Foradditionalinformation,youcanvisitthe CustomerCaresectionofourwebsiteatwww.inglis.ca.
Soap,waterandasoftclothorspongearesuggestedfirstunless otherwisenoted.
EXTERIOR PORCELAIN ENAMEL SURFACES (on some
models)
Foodspills containing acids, such as vinegar and tomato, should
be cleaned as soon as the entire range is cool. These spills may affect the finish.
Cleaning Method:
Glass cleaner, mild liquid cleaner or nonabrasive scrubbing
pad: Gently clean around the model and serial number plate
because scrubbing may remove numbers.
All-Purpose Appliance Cleaner Part Number 31682B (not
included): See cover for contact information.
STAINLESS STEEL (on some models)
NOTE: To avoid damage to stainless steel surfaces, do not use soap-filled scouring pads, abrasive cleaners, Cooktop Cleaner, steel-wool pads, gritty washcloths or abrasive paper towels.
Damage may occur to stainless steel surfaces, even with one-time or limited use.
Cleaning Method:
Rub in direction of grain to avoid damaging.
Stainless Steel Cleaner and Polish Part Number 31462B (not
included): See cover for contact information.
Liquid detergent or all-purpose cleaner:
Rinse with clean water and dry with soft, lint-free cloth.
Burned-on soil
Clean with Cooktop Cleaner and Cooktop Scraper. Metal marks from aluminum and copper
Clean with Cooktop Cleaner as soon as cooktop has cooled down. The marks will not totally disappear, but after many
cleanings they will become less noticeable.
Tiny scratches and abrasions
Use Cooktop Cleaner for scratches. Scratches and abrasions do not affect cooking performance, and after many cleanings
they will become less noticeable.
COOKTOP CONTROLS To avoid damage to the cooktop controls, do not use steel wool,
abrasive cleansers or oven cleaner. Do not soak knobs. When replacing knobs, make sure knobs are in
the OFF position. On some models, do not remove seals under knobs.
Cleaning Method:
Soap and water: Pull knobs straight away from control panel to remove.
CONTROL PANEL AND OVEN DOOR EXTERIOR
To avoid damage to the control panel, do not use abrasive cleaners, steel-wool pads, gritty washcloths or abrasive paper towels.
Cleaning Method:
Glass cleaner and soft cloth or sponge: Apply glass cleaner to soft cloth or sponge, not directly on
panel.
All-Purpose Appliance Cleaner Part Number 31682B (not included):
See cover for contact information.
METALLIC PAINT (on some models) Do not use abrasive cleaners, cleaners with bleach, rust removers,
ammonia or sodium hydroxide (lye) because paint surface may stain.
CERAMIC GLASS (on some models) Cleaning Method:
Cooktop Cleaner Part Number 31464B is recommended regularly to help avoid scratches, pitting and abrasions and to condition the cooktop.
Cooktop Scraper Part Number WA906B is also recommended for stubborn soils. These can be ordered as accessories. See cover for
contact information. The Cooktop Scraper uses razor blades. Store razor blades out of the reach of children.
Do not use steel wool, abrasive powder cleansers, chlorine bleach,
rust remover or ammonia because damage may occur.
Light to moderate soil
Clean with paper towels or clean damp sponge Sugary spills (jellies, candy, syrup)
Clean with cooktop scraper and cooktop cleaner. Scrape off sugary spills while the cooktop is still warm. You may want to wear oven mitts while cleaning the cooktop.
Heavy soil, dark streaks, specks and discoloration
Clean with Cooktop Cleaner or nonabrasive cleanser:
COIL ELEMENTS (on some models) Cleaning Method:
Damp cloth: Make sure control knobs are off and elements are cool.
Do not clean or immerse in water. Soil will burn off when hot.
BURNER BOWLS (on some models) Before removing or replacing coil elements and burner bowls,
make sure they are cool and the control knobs are in the OFF position.
Remove the coil element by pushing the edge of the coil element toward the receptacle. Lift it enough to clear the burner bowl. Pull
the coil element straight away from the receptacle to remove. Lift out the burner bowl.
Cleaning Method: Chrome burner bowls
Wash frequently in warm, soapy water. (It is not recommended to wash chrome bowls in adishwasher). A mild abrasive cleaner and a plastic scrubber can be used to remove stubborn stains.
For heavily soiled bowls, place an ammonia soaked paper towel on the stains and allow to soak for a short time, then gently scrub with a plastic scrubber.
Loading...
+ 16 hidden pages