Inglis IP84000, IP82000, IP80000, IP72000, IP70000 Owner’s Manual

DRYERUSERINSTRUCTIONS

INSTRUCTIONSPOURL YrlLISATIONDELASECHEUSE

TableofContentslTable desmati_res

ASSISTANCE OR SERVICE ............................1

DRYER SAFETY ............................................... 2

DRYER USE ...................................................... 4

DRYER CARE ................................................... 5

TROUBLESHOOTING ...................................... 6

WARRANTY ...................................................... 7

Assistance or Service

Ifyou need assistance or service, firstsee the "Troubleshooting"

section. Additional help is available by calling 1-800-461-5681

Monday to Friday8:00 a.m. - 6:00 p.m. (EST). Saturday 8:30 a.m.

- 4:30 p.m. (EST) or write: Customer Interaction Center

Whirlpool Canada Inc.

1901 Minnesota Court

Miseiseauga, Ontado LSN 3A7

Please include a daytime phone number in your correspondence. For installation and service, cell: 1-800-807-8777 or visit our

webalte at www.whidpool.com/canada.

Keep this book and your sales slip together for future

reference. You must provide proof of purchase or installation date for in-warranty service.

ASSISTANCE OU SERVICE ............................. 9

S_CURIT_ DE LA SECHEUSE ........................ 9

UTILISATION DE LA SECHEUSE .................. 11

ENTRETIEN DE LA SECHEUSE .................... 13

DEPANNABE ................................................... 14

GARANTIE ....................................................... 15

Write down the following information about your appliance to help you obtain assistance or service if you ever need it. You will need to know your complete model number and serialnumber. You can

find this information on the model and serial number label, located at the top inside dryer door well.

Dealer name Serial number

Address Phone number

Model number

Purchase date

8557472

DRYERSAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can killor hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or serlousty Injured If you don't Immediately follow Instructions.

You can be killed or seriously Injured If you don't follow Instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reducethe riskoffire, electricshock,or injuryto personswhen usingthe dryer,followbasic precautions,

including the following:

• Read all instructions before using the dryer.

• Do not place items exposed to cooking oils in your dryer.

Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire.

• Do not dry articlas that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-

cleaning solvents, other flammable, or explosive substances as they give off vapors that could ignite or explode.

• Do not allow children to play on or in the dryer. Close supervision of children is necessary when the dryer is

used near children.

• Before the dryer is removed from service or discarded, remove the door to the drying compartment.

• Do not reach intothe dryer if the drum is moving.

• Do not installor store the dryer where it will be exposed

to the weather.

• Do not tamper with controls.

SAVE THESE INSTRUCTIONS

• Do not repair or replace any part of the dryer or attempt any servicing unless specifically recommended in this

Use and Care Guide or in published user-repair instructions that you understand and have the skills to carry out.

• Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric

softener or product.

• Do not use heat to dry articles containing foam rubber or similarly textured rubber-like materials.

• Clean lint screen before or after each load.

• Keep area around the exhaust opening and adjacent surrounding areas free from the accumulation of lint, dust,

and dirt.

• The interior of the dryer and exhaust vent should be

cleaned periodically by qualified service personnel.

• See installation instructions for grounding requirements.

WARNING: For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, or to prevent property damage, personal injury, or death.

- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

- WHAT TO DO IF YOU SMELL GAS:

• Do not try to light any appliance.

• Do not touch any electrical switch; do not usa any phone in your building.

• Clear the room, building, or area of all occupants.

• Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's

instructions.

• If you cannot reach your gas supplier, call the fire department.

- Installation and service must be performed by a qualified installer, service agency, or the gas supplier.

Cheddug YourVent

Your dryer must be properly installed and vented to achieve maximum drying efficiency and shorten drying times. Use the minimum recommended installation clearances found inyour

Installation Instructions. See the Installation Instructions for more

information.

1. Do not use plastic vent or metal foil vent. Use 4" (10.2 cm) metal orflexible metal vent, Do not kink or crush flexible metal

vent, It must be completely extended to allow adequate exhaust air to flow, Check vent after installation, Refer to your

Installation Instructions for proper length requirements of vent,

2. Use a 4" (10,2 cm) exhaust hood,

3. Use the straightest path possible when routingthe vent,

Fire Hazard

Use a heavy metal vent. Do not use a plaatlc vent.

Do not use a metal foil vent, Failure to follow these Inatructlone can result In death

or fire,

Ifthe dryer isnot properly installed and vented, it will not be

covered under the warranty.

NOTE: Service calls caused by improper venting will be paid for

by the customer, whether It was a paid installation or sail- installed.

4. Use clamps to seal alljoints. Do not use duct tape, screws or other fastaning devices that extend intothe interiorof the vent

to secure vent.

5. Clean exhaust vent periodically, depending on use, but at least every 2 years, or when installing your dryer ina new

location. When cleaning is complete, be sure to follow the

Installation Instructions supplied with your dryer for final

product check.

DRYERUSE

Load clothes loosely into the dryer. Do not pack the dryen Allow space for clothes to tumble freely. The following charts show examples

of balanced loads that would allow for proper tumbling.

SUPER CAPACITY and SUPER CAPACITY PLUS DRYERS

Heavy Work Clothes Mixed Load Towels Delicates

4 pair of pants 3 sheets (1 king, 2 twin) 10 bath towels 3 camisoles 4 pair ofjcans 4 pillowcases 10 hand towels 1 robe

2 sweatshirts g T-shirts 14 washcloths 4 slips 2 sweatpants g pair of shorts 1 bath mat 8 undergarments

4 shirts 3 blouses 2 sets of slespwear

Heavy Work Clothes Mixed Load Towels Delicates

3 pair of pants 3 double sheets 10 bath towels 3 camisoles 4 pair ofjcans 4 pillowcases 10 hand towels 1 robe 2 pair of overalls 8 T-shirts 14 washcloths 4 slips 3 shirts 6 pair of shorts 1 bath mat 6 undergarments

10 handkerchiefs 1 child's outfit

3 shirts

EXTRA LARGE CAPACITY DRYERS

2 blouses 2 sets of slespwear 8 handkerchiefs 1 child's outfit

StartingYourDryer

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from dryer.

Do not dry anything that has ever had anything

flammable on It (even after washing).

Failure to follow these Instructions can result In death,

explosion, or fire.

This booklet covers several different models. Your dryer may not 3. have all ofthe cycles and features described.

Before using your dryer, wipe the dryer drum with a damp cloth to

remove dust from storing and shipping.

1. Load clothes loosely into the dryer and close the door. Do not pack the dryen Allow space for clothes to tumble freely.

2. Turn the Cycle Control knob to the recommended cycle for the

type of load being dried. Use the Energy Preferred Automatic Setting (*) setting to dry most heavy to medium weight fabrics. 4.

Temperature is included in the cycle selections. See "Dryer Cycle Descriptions" (separate sheet) for temperature 5.

suggestions.

Fire Hazard

No washer can completely remove o11. Do not dry anything that has ever had any type of oll on

It (Including cooking oils). Items contelnlng foam, rubber, or plaatlc must be dried

on a clothesline or by using an Air Cycle.

Failure to follow these Inatructlons can result In death

or fire.

(OPTIONAL) Your dryer may have an END OF CYCLE SIGNAL.

The signal is helpful when drying items that should be removed from the dryer as soon as itstops.

a On some models, the End of Cycle Signal is fixed.

On other models, the End of Cycle signal is part of the Start button and is seleotable. Turn the PUSH TO START

button to ON or OFR The signal will sound only if the

selector is set to On.

If desired, add fabric softener sheet. Follow package

instructions.

Press the PUSH TO START button.

Stopping and Restarting You can stop your dryer anytime during a cycle.

To stop your dryer Open the dryer door or turn the Cycle Control knob to OFR

NOTE: The Cycle Control knob should point to an Off area when

the dryer is not in use. To restart your dryer Close the door. Select a new cycle and temperature (if desired).

Pressthe PUSH TO START button.

DryingRackOption

Use the Drying Rack to dry items such as sweaters and pillows

without tumbling. The drum turns, but the rack does not move.

Ifyour model does not have a drying rack, you may be able to

purchase one for your model. To find out whether your model allows drying rack usage and for ordering information, please refer to the front page of your manual or contact the dealer from whom

you purchased your dryer.

NOTE: The rack must be removed for normal tumbling. Do not

use the automatic cycle with the drying rack.

DRYERCARE

To use the drying rack

1. Place drying rack in dryer. Slide rear pegs into the dimples on the back wall of the dryen Lower the front legs to rest on the

dryer opening.

2. Put wet items on top of rack, leaving space between items. Do not allow items to hang over the edge of the rack. Close

the door.

Select a timed drying cycle and temperature, or an air cycle.

Items containing foam, rubber, or plastic must be dried on a

clothesline or by using an air cycle. Refer to the following table.

4. Start the dryen Reset cycle to complete drying, if needed.

Rack Dry Cycle Terop "13roe

Washable wool items (block _med Low 60 rain. to shape, lay fiat on rack) Dry

Stuffed toys/pillows (cotton _med Low 60 min. or polyester filled) Dry

Stuffed toys/pillows Air Dry N/A 90 rain.

Foam rubber filled (no heat)

Cleaningthe DryerLocation

Keep dryer areaclear and free from items that would obstruct the

flow of combustion and ventilation ale

Explosion Hazard

Keep flammable materials and vapors, such as

geaollne, away from dryer. Place dryer at least 18 Inches (46 cm) above the floor

for a garage Installation, Fallura to do so can result In death, explosion, or flra,

Cleaningthe LintScreen

Clean the lint screen before each load. A screen blocked by lint can increase drying time.

IMPORTANT:

a Do not runthe dryer with the lintscreen loose, damaged,

blocked, or missing. Doing so can cause overheating and damage to both the dryer and fabrics.

a If lintfalls off the screen into the dryer during removal, check

the exhaust hood and remove the lint.

Every Load Cleaning

I. Pull the lintscreen toward you.

2. Roll lint off the screen with your fingers. Do not rinse or wash

screen to remove lint. Wet lint is hard to remove.

3. Push the lint screen firmly back into place.

As Needed Cleaning

1. Roll lint off the screen with your fingers.

2. Wet both sides of lint screen with hot water.

3. Wet a nylon brush with hot water and liquid detergent. Scrub

lint screen with the brush to remove residue buildup.

4. Rinse screen with hot water.

5. Thoroughly dry lintscreen with a clean towel. Replace screen

in dryer.

Cleaningthe DryerInterior

1. Apply a nonflammable houeshold cleaner to the stained area of the drum and rub with a soft cloth untilstain is removed.

2. Wipe drum thoroughly with a damp clcth.

3. Tumble a load of clean cloths or towels to dry the drum.

NOTE: Garments which contain unstable dyes, such as denim

blue jeans or brightly colored cotton items, may discolor the dryer interior.These stains are not harmful to your dryer and will not

stain future loads of clothes. Dry unstable dye items inside-out to prevent dye transfer.

RemovingAccumulatedLint

From Inside the Dryer Cabinet

Lintshould be removed every 2 years, or more often, depending

on dryer usage. Cleaning should be done by a qualified person.

From Inside the Exhaust Vent

Lint should be removed every 2 years, or more often, depending

on dryer usage.

+ 11 hidden pages