Inglis IGS325R, IGS326R Dimension Guide

30" Freestanding Gas Range
PRODUCT MODEL NUMBERS OVERALL DIMENSIONS
CABINET OPENING DIMENSIONS
IGS325R IGS326R
Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product. Specifications subject to change without notice.
Electrical: A 120-volt, 60-Hz, AC-only, 15-amp, fused electrical circuit is required. A time-delay fuse or circuit breaker is also recommended. It is recommended that a separate circuit serving only this dryer be provided.
Ref. 9760030
05-02-05
TM
29-7/8" (75.9 cm) width
46-7/8"
(119.1 cm)
overall height
25" (63.5 cm)
36" (91.4 cm) cooktop height
27-1/8" (68.9 cm) depth with handle
*
NOTE:
24" (61 cm) min. when bottom of wood or metal cabinet is protected by not less than 1/4" (6.4 mm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.
30" (76.2 cm) min. clearance between the top of the cooking platform and the bottom of an unprotected wood or metal cabinet.
IMPORTANT: Some cabinet and building materials are not designed to withstand the heat produced by the oven for baking and self-cleaning. Check with your builder or cabinet supplier to make sure that the materials used will not discolor, delaminate or sustain other damage.
18" (45.7 cm) upper cabinet to countertop
2" (5.0 cm) min. clearance from both sides of range to side wall or other combustible
(20.3 cm)
material.
4 ¹⁄₂"
(11.4 cm)
13" (33 cm) max. upper cabinet depth
30" (76.2 cm) min. opening width
30¹⁄₈" (76.5 cm) min. opening width
8"
(20.3 cm)
8"
17" (43.2 cm)
2" (5.1 cm)
For minimum clearance to top of cooktop, see NOTE.
This shaded area
recommended for
installation of rigid gas pipe.
4 ¹⁄₂"
(11.4 cm)
Loading...