Ingersoll-Rand 8RSL32, 8RSM32, 8RSN32, 8RSP53, 8RSQ53 User Manual

8RSL32, 8RSM32, 8RSN32, 8RSP53 and 8RSQ53 Motor Kit Exploded Diagram

(Dwg. TP1962)

8RSL32, 8RSM32, 8RSN32, 8RSP53 and 8RSQ53 Motor Kit Parts List

Part Description Part Number Used On

Vane - Packet (Set of 5 Vanes) 8SL-42-5 8RSL32, 8RSM32

Air Strainer (Brass) 834-61 8RSN32, 8RSP53

Throttle Lever Retaining Pin MR-100 8RSQ53

Throttle Plunger Bushing Seal (7/16” O.d. O-r ing) 405-159 ---

Rear Bearing Support Gasket (1-1/2” Diameter, Large Hole) 8RSL-283 ---

Valve Seat Seal (5/8” O.D. O-ring) AF120-290 ---

Exhaust Deflector Seal (2” O.D. O-ring) (2) AF160-291Z ---

Throttle Plunger Seal (3/16” Diameter) 8SL-259 ---

Exhaust Silencer 8SL-311 ---

Throttle Valve Spring 8SL-262 ---

Rear End Plate Gasket (1-1/2” Diameter) 8SL-739 ---

Reverse Valve Knob Pin R100B-120 ---

Reverse Valve Seal (2) 85H-167 ---

Form 04578372

Edition 1

December 2005

Parts and Maintenance

When the life of the motor has expired, it is recom mended that the motor be disassembled, degreased and parts be separated by material so that they can be
recycled.

Motor repair and maintenance should only be ca rried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll-Rand Office or Distributor.

Related Documentation

For additional information refer to Manual P7 086.

Manuals can be downloaded from www.irtools.com.

www.irtools.com

© 2005 Ingersoll-Rand Company

Form 04578372

Edition 1

December 2005