InFocus RJ12, RJ45, ProjectorNet Quick Start Manual
ProjectorNetTM Adapter
Quick Start Guide
Adapter
networking
1. Quick Start
The ProjectorNet™ Adapter kit contains the following items:
• ProjectorNet™ Serial to Ethernet Adapter
• Cable Adapter, ProjectorNet™ Adapter RJ12 to 9-pin Female, with power jack
• CD with ProjectorNet™ Adapter, Device Installer, and other user guides
InFocus ProjectorNet™ Adapter Quick Start Guide Page 1 of 10
1.1 Device Installer Software
Insert the product CD into your CD-ROM drive. The CD will automatically start and display the main
window.
If the CD does not launch automatically:
• Click the Start button on the Task Bar and select Run.
• Enter your CD drive letter, colon, backslash, Launch.exe (e.g., D:\Launch.exe).
Click the README button for important information about the product.
InFocus ProjectorNet™ Adapter Quick Start Guide Page 2 of 10
Click the Software and Manuals button to open the software installation and documentation page.
1. Click on Install Device Installer to install the software. The installation wizard window displays.
2. Respond to the installation wizard prompts.
3. Restart your system.
The following items are required to run Device Installer:
1. Windows 2000/2003 Server/XP/Vista
2. Microsoft .NET Framework v2.0
Note: If Microsoft .NET Framework v2.0 or later is not installed on your system, you will be prompted to install it before
Device Installer is installed. To install .NET Framework, click on the NET Framework v2 button
3. Microsoft Internet Explorer 5.1 or later
4. 30MB free hard drive space
1.1.1 Windows XP and Vista
The "Internet Connection Firewall" must be disabled, or else UDP Port 30718 must be available.
Otherwise, you will not be able to detect or communicate with any devices on the network.
To configure, go to the Control Panel, go to Network and Internet Connections, select the corresponding
network adapter, choose Properties, and go to the Advanced tab.
InFocus ProjectorNet™ Adapter Quick Start Guide Page 3 of 10
Loading...