InFocus INF7011 User Manual

HARDWARE GUIDE

BIGTOUCH INF7011

009-1521-02

CONTENTS

Declaration of Conformity ...................................................................................................................................................3

Safety Considerations .........................................................................................................................................................4

What’s Included ..................................................................................................................................................................6

Setup ...................................................................................................................................................................................7

Mounting ......................................................................................................................................................................7

Connecting to Other Devices ........................................................................................................................................8

Connecting AC Power ...................................................................................................................................................9

External PC Touchscreen Control Setup ......................................................................................................................9

Turning the Monitor On/Off .................................................................................................................................................9

Setting up the Wireless Mouse and Keyboard ..................................................................................................................10

Wireless Mouse ...........................................................................................................................................................10

Wireless Keyboard ......................................................................................................................................................10

Using the Remote ..............................................................................................................................................................11

Using the Keypad ..............................................................................................................................................................13

OSD (On-Screen Display) Menu System ...........................................................................................................................14

Picture Menu ...............................................................................................................................................................15

Screen Menu ...............................................................................................................................................................16

Audio menu .................................................................................................................................................................17

PIP menu .....................................................................................................................................................................18

Conﬁguration 1 ............................................................................................................................................................19

Conﬁguration 2 ............................................................................................................................................................20

Advanced Option ........................................................................................................................................................21

Troubleshooting ................................................................................................................................................................22

Speciﬁcations ....................................................................................................................................................................25

Limited Warranty ...............................................................................................................................................................26

Appendix ...........................................................................................................................................................................31

Calibration Tool ...........................................................................................................................................................31

Calibration Troubleshooting Tool ................................................................................................................................33

安全注意事項 ...............................................................................................................................................................35

BigTouch 70”顯示器I/O port 介紹前/後面板 ...............................................................................................................37

DECLARATION OF CONFORMITY

Manufacturer: InFocus Corporation, 13190 SW 68th Parkway, Portland, Oregon 97223-8368 USA

Trademarks

Apple, Mac and Facetime are trademarks or registered trademarks of Apple, Inc. Microsoft, Windows, PowerPoint, Excel and Word are trademarks or registered trademarks of Microsoft Corporation. Adobe and Acrobat are trademarks or registered trademarks of Adobe Systems Incorporated. HDMI logo and “High Deﬁnition Multimedia Interface” are registered trademarks of HDMI Licensing LLC. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. SRS TruSurround HD and SRS TruVolume are trademarks of SRS Labs, Inc. TruSurround HD and TruVolume technologies are incorporated under license from SRS Labs, Inc. InFocus, In Focus, INFOCUS (stylized), MondoCenter, Mondopad, BigTouch, and JTouch are either registered trademarks or trademarks of InFocus Corporation in the United States and other countries. All other trademarks are the property of their respective owners. Any other trademarks, service marks, personal names or product names are assumed to be the property of their respective owners and are used only for reference. There is no implied sponsorship, afﬁliation, certiﬁcation, approval or endorsement if we use one of these terms.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of the equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Changes or modiﬁcations not expressly approved by InFocus Corporation may void authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

Canada

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

This device complies with part 15 of the FCC Rules / RSS-210. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

Cet appareil est conforme à l’article 15 des réglementations de la FCC / CNR-210. Le fonctionnement est subordonné aux deux conditions suivantes : (1) ce appareil ne doit pas provoquer d’interférences nuisibles, et (2) ce appareil doit accepter toute interférence reçue, y compris des interférences qui peuvent provoquer un fonctionnemnent non désiré.

이 기기는 업무용으로 전자파적합등록을 한 기기이오니 판매자 또는 사용자는 이 점을 주의하시기 바라며 만약 잘못 판매 또는 구입하였을 때에는 가정용으로 교환하시기 바랍니다.

申明:

此为A级产品，在生活环境中，该产品可能会造成无线电干扰。在这种情况下，可能需要用户对其干扰采取切实可行的措施。

警告使用者。

這是甲類的通訊產品, 在居住的環境中使用時, 可能會造成射頻干擾, 在這種情況下, 使用者會被要求採取某些適當的對策。

INFORMATION FOR OPTICAL POINTING DEVICES ONLY:

This product has been tested to comply with International Standard IEC 60825-1: (1993), incld. Amd. 2(2001). This product uses LEDs that are inherently Class 1.

INFORMATION POUR LES DISPOSITIFS DE POINTAGE OPTIQUE SEULEMENT :

Ce produit a été testé pour se conformer à la norme IEC 60825-1 : (1993), y comp. Amd. 2 (2001). Ce produit utilize des DEL qui sont, par nature, de classe 1.

Page 3INF7011 Hardware Guide

Dongle Label:

FCC ID: E8HRG-0918

RG-0918

FC C ID: E 8HR G -091 8

Model : R G -091 8

CM IIT ID: 2009D J23 62

IC :815 0A-R G 0918

RG-0918

IC : 8150A-RG0918

CMIIT ID:2009DJ2362

FCC ID: E8HRG-0918

This document applies to regulatory model: INF7021c

Input ratings: 100-240V~, 50-60Hz, 5A

Output ratings: 100-240V~, 50-60Hz, 1A

InFocus reserves the right to alter product offerings and speciﬁcations at any time without notice.

SAFETY CONSIDERATIONS

Please read and follow all safety instructions provided below and on the monitor before connecting the monitor to a power source. Failure to comply with safety instructions may result in ﬁre, electrical shock, or personal injury and may damage or impair protection provided by the equipment. Please save all safety instructions.

• This monitor is very heavy and should be moved and installed by at least two individuals. Do not attempt to move or install the monitor yourself, otherwise injury and/or damage may occur.

• When moving the monitor, always hold the monitor ﬁrmly using the handles and side or bottom bezels. Do not hold the top bezel.

• When moving the monitor carton, do not tilt or invert the carton. Always keep it in an upright orientation.

• Disconnect all accessories and cables before moving the monitor.

• If the monitor is installed against the wall, maintain a distance of at least 1.98” (5cm) between the monitor and the

wall to provide adequate ventilation.

• Refer to this guide for proper startup and shutdown procedures.

• Follow all warnings and cautions in this manual and on the monitor.

• Locate the monitor at least 4’ (1.2m) away from heating and cooling vents.

• Do not block ventilation openings. Locate the monitor in a well-ventilated area without obstructions to intake or

exhaust vents.

• Do not install or use the monitor or speakers near any heat sources such as radiators, heat registers, stoves, or other devices (including ampliﬁers) that produce heat.

• Do not place the monitor in direct sunlight, humid, greasy or dusty places or in places where the monitor may come into contact with rain, smoke or steam.

• The monitor should not be used with the power cord near water, for instance, near a bathtub, washbowl, kitchen sink or swimming pool, etc.

• Do not use any components of the monitor, including the speakers, near water. Warning: To reduce the risk of ﬁre or electric shock, do not expose this equipment or any component of this equipment to rain or moisture.

Page 4

• Do not drop the monitor.

• Do not spill liquid on the monitor. Spilled liquid may damage the monitor.

• WARNING: This monitor must be securely attached to the ﬂoor/wall per installation instructions. Tipping, shaking, or

rocking the machine may cause injury or death.

• The power outlet used to power this monitor should be readliy accessible for fast disconnection in case of emergency.

• No naked ﬂame source, such as lighted candles, should be placed on the monitor.

• Use the power cord provided. Connect the power cord to a receptacle with a protective safety (earth) ground

terminal. A surge-protected power strip is recommended. Do not overload wall outlets.

• It is recommended that the Class 1 monitor be grounded.

• Do not install the monitor in places subject to mechanical vibration.

• Do not place the monitor on an unstable surface, which could result in serious personal injuries and monitor damage.

When mounting the monitor to a stand, be sure to following the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.

• When disconnecting the power cord, hold the plug, not the cord.

• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the point

where they exit from the monitor.

• Unplug the monitor if you are not going to use it for an extensive period of time.

• Unplug the monitor if you need to clean it with the included microﬁber cleaning cloth. The screen may be wiped with

the cleaning cloth when the power is off. Never use alcohol, solvents or ammonia-based liquids on this monitor.

• Wash hands after handling the cables supplied with this monitor.

• The monitor remote control, mouse and keyboard use batteries. Make sure the batteries’ polarity (+/-) is aligned

correctly. Dispose of used batteries in accordance with local disposal laws.

• Only use properly rated wall and stand mounting hardware that meet this product’s speciﬁcations and follow the manufacturer installation instructions. The warranty does not cover any damage caused by use of improperly rated mounting hardware or from improper installation.

• Refer all service to qualiﬁed service personnel. Do not remove the cover or back. Servicing your own monitor can be dangerous to you and will void the warranty.

• Only use replacement parts speciﬁed by InFocus. Unauthorized substitutions may result in ﬁre, electrical shock or injury and may void the warranty.

• When mounting the monitor to a wall, metric 8 (12mm) screws must be used. In addition, the mounting interface should comply with the UL1678 standard in North America. The mounting means should be strong enough to bear the weight of the monitor (approximately 176.37 lbs / 80 kg without the stand).

• Follow these instructions to help ensure image quality over the life of the monitor. Failure to follow these instructions may affect the warranty.

• Lithium Battery (in PC Box) Caution: There is a risk of explosion if the battery is replaced by an incorrect type. The battery should only be replaced with an identical or equivalent type of battery as recommended by the manufacturer. Dispose of used batteries in accordance with local disposal laws.

Page 5INF7011 Hardware Guide

WHAT’S INCLUDED

POWER

HOME

INPUT MENU

RESIZE

PIP

INPUT

SWAP

ON/OFF

AUDIOPOSITION

CONTRASTBRIGHTNESS

INFO

BACK

VOL UP

MUTE

VOL DOWN

Warranty

Quick Start

1920 x 1080 monitor

Wireless Keyboard & Mouse*

(Batteries not included)

Guide

Documentation Stylus

(batteries not included)

AntennasRemote control

Power cord

(varies per country)

Also included but not shown above:

• 6' RCA AV cable

• 6' 3.5mm to L/R RCA cable

*Not included for all countries. For setup purposes, a keyboard and mouse are recommended. For additional accessory options, such as stands, feet, carts and wall mounts, see the InFocus website (www.infocus.com/store) or your local dealer.

Page 6

SETUP

Mounting

This product does not ship with mounting accessories. Only use commercially manufactured mounting accessories which meet this product's speciﬁcations and follow the manufacturer installation instructions.

• To prevent damage to the screen surface, carefully place your monitor face-down on a clean, cushioned surface.

• When mounting the monitor to a wall, metric 8 (12mm) screws must be used. Use spring washers to prevent the

screws from coming loose. In addition, the mounting interface should comply with the UL1678 standard in North America. The mounting means should be strong enough to bear the weight of the monitor (approximately 176.37 lbs / 80 kg without the stand).

• Do not install the monitor in places subject to mechanical vibration.

• Do not place the monitor on an unstable surface, which could result in serious personal injuries and monitor damage.

When mounting the monitor to a stand, be sure to following the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.

• WARNING: This monitor must be securely attached to the ﬂoor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury or death.

• If the monitor is installed against the wall, maintain a distance of at least 1.98” (5cm) between the monitor and the wall to provide adequate ventilation.

• Do not install or use the monitor near any heat sources such as radiators, heat registers, stoves, or other devices (including ampliﬁers) that produce heat.

• Do not place the monitor in direct sunlight, humid, greasy or dusty places or in places where the monitor may come into contact with rain, smoke or steam.

Page 7INF7011 Hardware Guide

Connecting to Other Devices

A full range of digital and analog video inputs and audio source devices can be connected to the connection panels on the back and side of the monitor. Available jacks include: HDMI In (2), PC In (1), Composite Video (1), Component RCA (1), RS232 (1), Audio In 3.5mm (1), Audio In RCA (1-R/L), Microphone In (1), RJ45 (2), USB-B for touch control (1), USB

2.0-A (5), USB 3.0-A (2), Audio Out RCA (1-R/L), and HDMI Out (1).

Antennas

TOUCH

CONTROL

USB

Audio OUT

HDMI1HDMI2 COMPONENTVIDEO PC IN

LED

RJ45 USB-A

RS232

IN 1

Audio

IN 2

L R

Page 8

Connecting AC Power

1) Connect one end of the AC power cord to the AC In jack on the back of the monitor.

2) Connect the other end of the AC power cord to an AC outlet.

3) Press the power switch. (The LED on the front of the monitor turns on.)

NOTES:

• Your monitor should only be operated from the power source indicated on the label.

• Always unplug the AC power cord from the power outlet when you are not using your monitor for an extended period

of time.

External PC Touchscreen Control Setup

1) Connect an external computer to the monitor using a DVI, HDMI, or VGA cable.

2) Connect the Type A to Type B USB cable to the USB Type A jack on the computer and to the USB Type B jack on

the side of the monitor.

3) The computer can now be controlled by using touchscreen gestures on the monitor.

TURNING THE MONITOR ON/OFF

1) Verify that the power cord is connected to a power outlet and that the power switch is ON.

2) Press the Power button on the remote or the right side of the monitor. (The LED on the front of the monitor

turns off.)

NOTES:

• If the monitor does not respond to normal power down procedures, press and hold the PC box Power button (located on the back of the monitor) for 7-8 seconds.

• By default, the monitor goes into system standby after 20 minutes of inactivity. To change this behavior, use the Daytime Power Management feature within the Mondopad software or make power option changes within the Windows Control panel.

Page 9INF7011 Hardware Guide

SETTING UP THE WIRELESS MOUSE AND KEYBOARD

NOTE: The wireless mouse and keyboard is not included as a standard accessory for some countries. For initial setup

and/or conﬁguration, it may be easier to use a mouse and keyboard. Any standard wired or wireless mouse or keyboard can be connected through the monitor's USB ports.

Wireless Mouse

1) Turn the mouse over and remove the battery cover.

2) Remove the USB dongle from its holder in the battery

compartment of the mouse.

3) Plug it into a free USB-A port on the Bezel Connector Panel

of the monitor. You may be asked to go online to ﬁnd the necessary drivers. If you are warned that the drivers have not been tested for compatibility, tap Continue installation to ﬁnish.

4) Insert two (2) AAA batteries (not included) into the mouse by

aligning the + and – end of the batteries as indicated and sliding them in place.

5) Replace the cover and switch the mouse ON using the slide

switch next to the battery bay.

Wireless Keyboard

1) Turn the keyboard over and open the battery cover.

2) Insert two (2) AAA batteries (not included) into the keyboard, by aligning the + and – ends of the batteries and

sliding them in place.

3) Replace the cover.

4) Press the CONNECT button and hold it for one second to allow the keyboard to bind with the dongle.

Page 10

USING THE REMOTE

The remote uses two (2) AAA batteries (not included). Install the batteries by removing the cover from the remote’s back, aligning the + and – ends of the batteries, sliding them in place and replacing the cover.

To operate, point the remote at the monitor sensor at the bottom right-hand corner of the monitor. The range of optimum operation is about 26’ (8m) and within a horizontal and vertical angle of 30 degrees.

30˚ 30˚

POWER

INPUT MENU

HOME

RESIZE

PIP

ON/OFF

INPUT

SWAP

AUDIOPOSITION

CONTRASTBRIGHTNESS

BACK

INFO

VOL UP

MUTE

VOL DOWN

CAUTION:

• When disposing of the batteries, be sure to do so in an environmentally proper manner.

• If the remote control gets wet, wipe it dry immediately.

• Avoid excessive heat and humidity.

• Ensure the batteries’ polarity (+/-) is properly aligned.

• Do not mix new and old batteries or different types of batteries together.

• Replace the batteries as soon as they run out.

• Remove batteries from the remote control when storing or not in use for a prolonged period.

Page 11INF7011 Hardware Guide

+ 28 hidden pages