InFocus INF6502WB, INF7002 Quick Start Manual

INF6502WB/INF7002

QUICK START GUIDE

HARDWARE SETUP

1) The monitor should be installed in an upright position.

2) Connect one end of the AC power cord to the AC In jack on the back of the monitor.

3) Connect the other end of the AC power cord to an AC outlet.

4) Connect a source to the monitor, if desired.

5) Toggle the power switch to the ON position.

6) Press the Power button. (The LED on the front of the monitor turns on.)

7) The monitor displays the connected source image or built-in features, depending on the model. Refer to the moni­tor's user guide on www.infocus.com/support for more information.

Notes:

• Your monitor should only be operated from the power source indicated on the label.

• Always unplug the AC power cord from the power outlet when you are not using your monitor for an extended period

of time.

EXTERNAL PC TOUCHSCREEN CONTROL SETUP

1) Connect an external computer to the monitor using an HDMI or VGA cable.

2) Connect the Type A to Type B USB cable to the USB Type A jack on the computer and to the USB Type B jack on
the side of the monitor.

3) The computer can now be controlled by using touchscreen gestures on the monitor.

For more information: Go to www.infocus.com/support

INF6502WB/INF7002 Quick Start Guide
p/n 009-1617-01

Page 1 of 1