InFocus IN105, IN104, IN102 User Manual

100

Reference Guide

Regulatory models T102, T104 5B.13201.001

Introduction..................3

Projector features...........................3

Shipping contents ..........................4

Projector exterior view ...................5

Controls and functions...................6

Positioning your

projector.......................9

Choosing a location ....................... 9

Obtaining a preferred projected

image size............................... ... .. 10

Connection.................13

Connecting a computer or

monitor......................................... 14

Connecting video source

devices.........................................16

Operation....................20

Starting up the projector............... 20

Using the menus.......................... 21

Utilizing the password function .... 22

Switching input signal .................. 24

Adjusting the projected image......25

Magnifying and searching for

details........................................... 27

Selecting the aspect ratio............. 27

Optimizing the image........ ... ... ... .. 29

Setting the presentation timer...... 33

Hiding the image.......................... 34

Locking control keys ....................34

Freezing the image......................35

Operating in a high altitude

environment................................. 35

Adjusting the sound .....................35

Personalizing the projector menu

display.......................................... 36

Shutting down the projector......... 36

Menu operation............................ 37

Maintenance...............44

Care of the projector.................... 44

Lamp information......................... 45

Troubleshooting ........51

Specifications ............52

Projector specifications................ 52

Dimensions.................................. 53

Timing chart................................. 53

information.................55

Table of contents2

Introduction

Projector features

The projector integrates high-performance optical engine projection and a userfriendly design to deliver high reliability and ease of use.

The projector offers the following features.

• Wall color correction allowing projection on surfaces of several predefined colors

• Quick auto search speeding up the signal detecting process

• Selectable password protected function

• Up to 11 sets of picture modes pro viding mult iple choices for diffe rent project ion purposes

• 3D color management allowing color adjustments to your liking

• Selectable quick cooling function makes the projector cool in a shorter time

• Presentation timer for better control of time during present ations

• One-key auto-adjustment to display the best picture quality

• Digital keystone correction to correct distorted images

• Adjustable color balance control for data/vide o display

• High brightness projection lamp

• Ability to display 16.7 million colors

• Multi-language On-Screen Display (OSD) menus

• Switchable normal and economic modes to reduce the power consumption

• Component HDTV compatibility (YP

• High quality manual zoom lens

• The apparent brightness of the projected image will vary depending on the ambient lighting conditions, selected input signal contrast/brightness settings, and is directly proportional to projection distance.

• The lamp brightness will decline over time and may vary within the lamp manufacturer's specifications. This is normal and expected behavior.

bPr)

Introduction 3

Shipping contents

Carefully unpack and verify that you have all of the items shown below. If any of these items are missing, please contact your place of purchase.

Standard accessories

The supplied accessories will be suitable for your region, and may differ from those illustrated.

Projector Power Cord VGA Cable

Reference

Guide CD

Remote Control & Battery Carry case

Registration

Card

Quick Start Guide

Optional accessories

1. Ceiling mount, wall mount

2. LiteShow II wireless presentation adaptor

3. Pull down and pull up 4:3 screens

4. Cables and adaptors

5. Replacement lamp

6. Optional remote

7. Projector lock system

Introduction4

Warranty

Booklet

Pull the tab before using the remote control.

Safety

Booklet

Projector exterior view

Front/upper side

Rear/lower side

16 18

151210

1411 13

1. External control panel (See "Projector and remote

control" on page 6 for details.)

2. Vent (heated air exhaust)

3. Quick-release button

4. Lens cover

5. Focus ring and Zoom ring

6. Front IR remote sensor

7. Projection lens

8. AC power cord inlet

9. RS-232 control port

10. RGB signal output socket

11. RGB (PC)/Component video (YPbPr/YCbCr) signal input socket

12. Video input socket

13. S-Video input socket

14. Audio signal input socket Audio signal output socket

15. Kensington anti-theft lock slot

16. Quick-release foot

17. Lamp cover

18. Rear adjuster foot

Warning

• THIS APPARATUS MUST BE GROUNDED.

• When installing the unit, make certain that the associated wall switch or AC power outlet is easily accessible, so that the unit can be quickly disconnected if needed.

Introduction 5

Controls and functions

Projector and remote control

1 2 3

4 5

1. Focus ring

Adjusts the focus of the projected image. See "Fine-tuning the image size

and clarity" on page 26 for details.

2. Zoom ring

Adjusts the size of the image. See

"Fine-tuning the image size and clarity" on page 26 for details.

3. TEMPerature indicator light

Lights up red if the projector's temperature becomes too high. See

"Indicators" on page 50 for details.

4. POWER indicator light

Lights up or flashes when the projecto r is under operation. See "Indicators" on

page 50 for details.

5. POWER

6. Left/BLANK

7. MODE/ENTER

Toggles the projector between standby mode and on. See "Starting

up the projector" on page 20 and "Shutting down the projector" on page 36 for details.

Used to hide the screen picture. See

"Hiding the image" on page 34 for

details.

Selects an available picture setup mode. See "Selecting a picture mode"

on page 29 for details.

Enacts the selected On-Screen Display (OSD) menu item.

Introduction6

8. MENU/EXIT

Turns on the On-Screen Display (OSD) menu. Goes back to previous OSD menu, exits and saves menu settings. See "Using the menus" on

page 21 for details.

9. LAMP indicator light

Indicates the status of the lamp. Lights up or flashes when the lamp has developed a problem. See "Indicators"

on page 50 for details.

10. AUTO

Automatically determines the best picture timings for the displayed image. See "Auto-adjusting the

image" on page 25 for details.

11. Keystone/Arrow keys ( / Up,

/Down)

Manually corrects distorted images resulting from an angled projection. See "Correcting keysto ne" on page 26 for details.

12. Right/

Activates panel key lock. See "Locking

control keys" on page 34 for details.

When the On-Screen Display (OSD) menu is activated, the #6, #11, and #12 keys are used as directional arrows to select the desired menu items and to make adjustments. See

"Using the menus" on page 21 for

details.

13. SOURCE

Displays the source selection bar. See "Switching input signal" on page

24 for details.

14. Freeze

Freezes the projected image. See

"Freezing the image" on page 35 for

details.

15. Left

Selects the desired menu items and makes adjustments. See "Using the

menus" on page 21 for details.

16. BLANK

Used to hide the screen picture. See

"Hiding the image" on page 34 for

details.

17. Digital Zoom keys (+, -)

Magnifies or reduces the projected picture size. See "Magnifying and

searching for details" on page 27 for

details.

Introduction 7

Remote control effective range

Infra-Red (IR) remote control sensor is located on the front of the projector. The remote control must be held at an angle within 30 degrees perpendicular to the projector's IR remote control sensor to function correctly. The distance between the remote control and the sensor should not exceed 8 meters (~ 26 feet).

Make sure that there are no obstacles between

the remote control and the IR sensor on the projector that might obstruct the infra-red beam.

Replacing the remote control battery

1. Pull out the battery holder.

Please follow the illustrated instructions. Push and hold the locking arm while pulling out the battery holder.

2. Insert the new battery (Type: CR-2025) in the holder. Note the positive polarity should face outward.

3. Push the holder into the remote control.

CAUTION

• Avoid excessive heat and humidity.

• There may be battery damage if the battery is incorrectly replaced.

• Replace only with the same or equivalent type recommended by the battery manufacturer.

• Dispose of the used battery according to the battery manufacturer’s instructions.

• Never throw a battery into a fire. There may be danger of an explosion.

• If the battery is dead or if you will not be using the remote control for a long time, remove

the battery to prevent damage to the remote control from possible battery leakage.

Introduction8

Positioning your projector

Choosing a location

Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position of your screen, the location of a suitable power outlet, as well as the locati on and distance between the projector and the rest of your equipment.

Your projector is designed to be installed in one of four possible installation locations:

1. Front Table

Select this location with the projector placed near the floor in front of the screen. This is the most common way to position the projector for quick setup and portability.

2. Front Ceiling

Select this location with the projector suspended upside-down from the ceiling in front of the sc reen.

Purchase the InFocus ceiling mount, SP-CEILUNIV, from your dealer to mount your projector on the ceiling.

Set Front Ceiling in the SYSTEM SET UP: B asi c >

Projector Position menu after you turn the pro jector on.

3. Rear Table

Select this location with the projector placed near the floor behind the screen.

Note that a special rear projection screen is required.

Set Rear Table in the SYSTEM SETUP: Basic > Projector Position menu after you turn the projector on.

4. Rear Ceiling

Select this location with the projector suspended upside-down from the ceiling behind the screen.

Note that a special rear projection screen and the InFocus ceiling mount, SP-CEIL-UNIV, are required for this installation location.

Set Rear Ceiling in the SYSTEM SETUP: Basic > Projector Position menu after you turn the pro jector on.

Positioning your projector 9

Obtaining a preferred projected image size

The distance from the projector lens to the screen, the zoom setting, and the video format all factor into the resulting projected image size.

4:3 is the native aspect ratio of this projector. To be able t o project a compl ete 16:9 (widescreen) aspect ratio image, the projector can resize and scale a widescreen image to the projector's native aspect width. This will result in a proportionally smaller height equivalent to 75% of the projec tor's native aspect height.

4:3 aspect image in a 4:3

aspect display area

Thus, a 16:9 aspect image will not utilize 25% of the height of a 4:3 aspect image displayed by this projector. This will be seen as darkened (unlit) bars along th e top and bottom (vertical 12.5% height respectively) of the 4:3 projection display area whenever displaying a scaled 16:9 aspect image in the vertical center of the 4:3 projection display area.

The projector should always be placed horizontally level (lik e flat on a table), and positioned directly perpendicular (90° right-angle square) to the horizontal cen ter of the screen. This prevents image distortion caused by angled projections (or projecting onto angled surfaces).

The modern digital projector does not project directly forward (like older style reelto-reel film projectors did). Instead, digital projectors are designed to project at a slightly upward angle above the horizontal plane of the projector. This is so that they can be readily placed on a table and will project forwar d and upwards onto a screen positioned so that the bottom edge of the screen is above the level of the table (and everyone in the room can see the screen).

If the projector is mounted on a ceiling, it must be mounted upside-down so t hat it projects at a slightly downward angle.

You can see from the diagram on page 12, that this type of projection causes the bottom edge of the projected image to be vertically offset from the horizontal plane of the projector. When ceiling mounted, this refers to the top edge of the projected image.

If the projector is positioned furthe r away from t he screen, t he pro jected ima ge size increases, and the vertical offset also increases proportion ately.

When determining the position of the screen and projec tor, you will need to accou nt for both the projected image size and the vertical offset dimension, which are directly proportional to the projection distance.

InFocus has provided a table of 4:3-aspect-ratio screen sizes to assist you in determining the ideal location for your projector. There are two dimensions to consider, the perpendicular horizontal distance from the center of the screen (projection distance), and the vertical offset height of the proj ector from the horizontal edge of the screen (offset).

16:9 aspect image scaled to a 4:3

aspect display area

Positioning your projector10

How to determine the position of the projector for a given screen size

1. Select your screen size.

2. Refer to the table and find the closest match to your screen size in the left columns labelled "4:3 screen diagonal". Using this value, look across this row to the right to find the corresponding average distance from screen value in the column labelled "Average". This is the projection distance.

3. On that same row, look across to the right column and make note of the

"Vertical offset" value. This will determine the final vertical offset placement of

the projector in relation to the edge of the screen.

4. The recommended position for the projector is aligned perpendicular to the horizontal center of the screen, at the distance from the screen determined in step 2 above, and offset by the value determined in step 3 above.

For example, if you are using a 108-inch screen, the average projection distance is 4320 mm (170”) and with a vertical offset of 82 mm (3.2”).

If you place the projector in a different position (to that recommended), you will have to tilt it down or up to center the image on the screen. In these situations, some image distortion will occur. Use the Keystone functi on to correct the distortion. See "Correcting keystone" on page 26 for details.

How to determine the recommended screen size for a given distance

This method can be used for situations where you have purchased this projector and would like to know what screen size will fit in your room.

The maximum screen size is limited by the physical space available in your room.

1. Measure the distance between the projector and where you want to position the screen. This is the projection distance.

2. Refer to the table and find the closest match to your measurement in the average distance from screen column labelled "Average". If the min and max values are available on the table, check that your measured distance is between the min and max distances listed on either side of the average distance value.

3. Using this value, look across that row to the left to find the corresponding screen diagonal listed in that row. That is the projected image size of th e projector at that projection distance.

4. On that same row, look across to the right column and make note of the

"Vertical offset" value. This will determine the final placement of the screen in

relation to the horizontal plane of the projector.

For example, if your measured projection distance was 4.5 m (177”), the closest match in the "Average" column is 4320 mm (170”). Looking across this row shows that a 108-inch screen is required.

Positioning your projector 11

Projection dimensions

Refer to "Dimensions" on page 53 for the center of lens dimensions of this projector before calculating the appropriate position.

Maximum zoom

Minimum zoom

Screen

Center of lens

Vertical offset

Projection distance

4:3 screen diagonal Recommended projection distance from

Vertical offset

screen Min length (with max.

zoom)

Feet Inches mm mm Inches mm Inches mm Inches mm Inches

4 48 1219 1829 72 1920 76 2011 79 37 1.4

59 1500 2250 89 2362 93 2475 97 45 1.8 5 60 1524 2286 90 2400 94 2514 99 46 1.8 6 72 1829 2743 108 2880 113 3017 119 55 2.2

79 2000 3000 118 3150 124 3300 130 60 2.4 7 84 2134 3200 126 3360 132 3520 139 64 2.5 8 96 2438 3657 144 3840 151 4023 158 73 2.9

98 2500 3750 148 3937 155 4124 162 75 3.0 9 108 2743 4114 162 4320 170 4526 178 82 3.2

118 3000 4499 177 4724 186 4949 195 90 3.5

10 120 3048 4571 180 4800 189 5029 198 91 3.6

138 3500 5249 207 5512 217 5774 227 105 4.1

12 144 3658 5486 216 5760 227 6034 238 110 4.3

157 4000 5999 236 6299 248 6599 260 120 4.7

15 180 4572 6857 270 7200 283 7543 297 137 5.4

197 5000 7499 295 7874 310 8249 325 150 5.9

18 216 5486 8229 324 8640 340 9051 356 165 6.5

236 6000 8999 354 9449 372 9899 390 180 7.1

25 300 7620 11429 450 12000 472 12571 495 229 9.0

There is 3% tolerance among these numbers due to optical component variations. InFocus recommends that if you intend to permanently install the projector, you should physically test the projection size and distance using the actual projector before you permanently install it, so as to make allowance for this projector's optical characteristics. This will help you determine the exact mounting position so that it best suits your installa tion location.

Average Max length

(with min.

zoom)

Positioning your projector12

Connection

When connecting a signal source to the projector, be sure to:

1. Turn all equipment off before making any connections.

2. Use the correct signal cables for each source.

3. Ensure the cables are firmly inserted.

In the connections shown below, some cables may not be included with the projector (see

"Shipping contents" on page 4). Additional cables can be purchased from InFocus.com in

select areas, your dealer and/or from a commercial electronics store.

Connection 13

Connecting a computer or monitor

Connecting a computer

The projector provides a VGA input socket that allows you to connect it to both IBM® compatibles and Macintosh® computers. A Mac adapter is needed if you are connecting legacy version Macintosh computers.

To connect the projector to a notebook or desktop computer:

1. Take the supplied VGA cable and connect one end to the D-Sub output socket of the computer.

2. Connect the other end of the VGA cable to the COMPUTER IN1/COMPUTER IN2 signal input socket on the projector.

3. If you wish to make use of the projector (mixed mono) speaker in your presentations, take a suitable audio cable and connect one end of the ca ble to the audio output socket of the device, and the other end to the AUDIO IN socket of the projector.

4. If you wish, you can use another suitable audio cable and c onnec t on e end of the cable to the AUDIO OUT jack of the projector, and the other end to your external speakers (not supplied).

Once connected, the audio can be controlled by the projector On-Screen Display (OSD) menus. See "Adjusting the sound" on page 35 for details. The built-in speaker will be muted when the AUDIO OUT jack is connected.

The final connection path should be like that shown in the followin g diagram:

Notebook or desktop computer

Speakers

VGA cable

Audio cable

Many notebooks do not turn on their external video ports when connected to a projector. Usually a key combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate a function key labeled CRT/LCD or a function key with a monitor symbol on the notebook. Press FN and the labeled function key simultaneously. Refer to your notebook's documentation to find your notebook's key combination.

Audio cable

Connection14

Connecting a monitor

If you want to view your presentation close-up on a monitor as well as on the screen, you can connect the MONITOR OUT signal output s o cket on the projector to an external monitor with a VGA cable following the instructions below:

To connect the projector to a monitor:

1. Connect the projector to a computer as described in "Connecting a computer"

on page 14.

2. Take a suitable VGA cable (only one supplied) and connect one end of the cable to the D-Sub input socket of the video monitor. Or if your monitor is equipped with a DVI input socket, take a VGA to DVI-A cable and connect the DVI end of the cable to the DVI input socket of the video monitor.

3. Connect the other end of the cable to the MONITOR OUT socket on the projector.

The final connection path should be like that shown in the followin g diagram:

Monitor

(VGA) (DVI-A)or

(VGA)

• The D-Sub output only works when an appropriate D-Sub input

is made to the COMPUTER IN1 jack.

• If you wish to use this connection method when the projector is in standby mode, make

sure the VGA Out function is turned on in the SYSTEM SETUP: Advanced menu. Se e "VGA

Out" on page 43 for details.

Connection 15

Connecting video source devices

You can connect your projector to various video source devices that provide any one of the following output sockets:

• Component video

• S-Video

• Video (composite)

You only need to connect the projector to a single video sou rce device; however each provides a different level of video quality. The method you choose will most likely depend upon the availability of matchi ng terminals on both the projector and the video source device as described below:

Best video quality

The best available video connection method is Component video (not to be confused with composite video). Digital TV tuner and DVD players output Component video natively, so if available on your devices, this sh ould be your connection method of choice in preference to (composite) video.

See "Connecting a Componen t video source device" on page 17 for ho w to connect the projector to a component video device.

Better video quality

The S-Video method provides a better quality analog video than standard composite video. If you have both composite video a nd S-Video output terminals on your video source device, you should elect to use the S-Video option.

See "Connecting an S-Video source device" on page 18 for how to connect the projector to an S-Video device.

Good video quality

Composite video is analog video and will result in a perfectly acceptable, but less than optimal result from your projector. The other methods described above provide better video quality.

See "Connecting a composite video source device" on page 19 for how to connect the projector to a composite video device.

Connecting audio

The projector has one built-in mono speaker which is designed to prov ide basic audio functionality accompanying data presentations for busi ness purposes only. It is not designed for, nor intended for stereo audio reproduction use as might be expected in home theater or home cinema applications. Any stereo audio input (if provided), is mixed into a common mono audio output through the projector speaker.

If you have a separate sound system, you will most likely wa nt to connect the audi o output of your video source device to that sound system, instead of to the mono audio projector. The audio connections are provided for informational purposes only. You need not connect audio to the projector if there is an alternate sound system available, or if audio is not required.

Connection16

Connecting a Component video source device

Examine your video source device to determine if it has a set of unused Component video output sockets available:

• If so, you can continue with this procedure.

• If not, you will need to reassess which method you can use to connect to the

device.

To connect the projector to a Component video source device:

1. Take a Component video to VGA (D-Sub) adaptor cable and connect the end with 3 RCA type connectors to the Component video output sockets of the video source device. Match the color of the plugs to the color of the sockets; green to green, blue to blue, and red to red.

2. Connect the other end of the Component vide o to VGA (D-Sub) adapt or cable (with a D-Sub type connector) to the COMPUTER IN1/COMPUTER IN2 socket on the projector.

4. If you wish, you can use another suitable audio cable and c onnec t on e end of the cable to the AUDIO OUT jack of the projector, and the other end to your external speakers (not supplied). Once connected, the audio can be controlled by the projector On-Screen Display (OSD) menus. See "Adjusting the sound" on page 35 for details.

The built-in speaker will be muted when the AUDIO OUT jack is connected.

The final connection path should be like that shown in the followin g diagram:

AV device

Speakers

RS-232

MONITOR OUT COMPUTER IN1 COMPUTER IN2 VIDEO S -VIDEO AUDIO IN AUDIO OUT

Component video to VGA (D-Sub) adaptor cable

Audio cable

• The projector is only capable of playing mixed mono audio, even if a stereo audio input is

connected. See "Connecting audio" on page 16 for details.

• If the selected video image is not displayed after the projector is turned on and the correct

video source has been selected, check that the video source device is turned on and operating correctly . Also check that the signal cables have been connected correctly.

Audio cable

Connection 17

+ 38 hidden pages