InFocus IF-9029 Quick Start Guide

Charging the Battery

Before using the phone, it is recommended to fully charge the
battery first.

1. Connect the smaller end of the USB
cable to the USB port of the device.

2. Connect the other end of the cable to
the AC adapter or other USB port with
power source (for example, laptop).

3. Plug the AC adapter to a wall outlet to
start charging.

SAR Information
This mobile device meets guidelines for exposure to radio

waves. Your mobile device is a radio transmitter and receiver.
It is designed not to exceed the limits for exposure to radio
waves recommended by international guidelines. These
guidelines were developed by the independent scientific
organization ICNIRP and include safety margins designed to
assure the protection of all persons, regardless of age and
health.
The exposure guidelines for mobile devices employ a unit of
measurement known as the Specific Absorption Rate or SAR.

The SAR limit stated in the ICNIRP guidelines is 1.6 W/kg

averaged over 1 grams of tissue. Tests for SAR are conducted
using standard operating positions with the device transmitting
at its highest certified power level in all tested frequency
bands.The actual SAR level of an operating device can be
below the maximum value because the device is designed to
use only the power required to reach the network. That
amount changes depending on a number of factors such as
how close you are to a network base station. The highest SAR
value under the ICNIRP guidelines for use of the device at the
head is 0.245 W/kg and at the body is 1.034 W/kg (The
measure distance of 5mm).Use of device accessories and
enhancements may result in different SAR values. SAR

values may vary depending on national reporting and testing

requirements and the network band.
Important Safety Information
Use a wireless hands-free system (headphone, headset) with

a low power Bluetooth emitter.

• Make sure the cell phone has a low SAR.

• Keep your calls short or send a text message (SMS)

instead.This advice applies especially to children,
adolescents and pregnant women.

• Use cell-phone when the signal quality is good.

• People having active medical implants should

preferably keep the cell phone at least 15 cm away from
the implant.

RoHS Compliance
This product is in compliance with DIRECTIVE 2011/65/EU

OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
of 8 June 2011,on the restriction of the use of certain
hazardous substances in electrical and electronic
equipment and its amendments.

E-Waste

Products are in conformity with the requirements of the
reduction of hazardous substances of the E-Waste rules

2016.
For the purpose of recycling to facilitate effective utilization of
resources, please return this product to a nearby authorized
Collection Centre, registered Dismantler or Recycler, or
Service Centre for disposing of this product.

To know more about safe and secure recycling and proper
disposal of end-of-life electrical and Electronic Products
Customer can contact our recycling partner on toll-free
numbers region wise at:

North India-1800-102-8632

South India- 1800-843-3303

East India- 1800-843-3301
West India-1800-843-3302

Email – [e-mail]

For more detailed information, see the User Guide.
www.infocusindia.co.in

Warning

• Charge only indoors and in dry environments.

• For safety, the overheat protection will be active during

charging. If the system temperature reaches above the
maximum level, the device will automatically stop charging.

The device will only resume charging when normal operating

temperature is reached.

• If there is no response after you press the power button or
touch the panel, press and hold the ‘power button and volume
(+) key’ for 10 seconds, phone will restart, and if you hold the
‘power button’ for 10 seconds, it will restart too.

• InFocus standard for water ingression criteria.

(1) Water ingression label become red color or contaminated.
(2) Water marks or corrosions on device PCB or components.

• Please make sure the temperature for adapter will not
be higher than 40Ċ

• Do not store your phone in temperatures higher than 60Ċ

• The operating temperature for this device is from -10Ċ to 50Ċ

WEEE Notice
The WEEE logo on the product or on its box indicates that this

product must not be disposed of or dumped with your other
household waste. You are liable to dispose of all your
electronic or electrical waste equipment by relocating over to
the specified collection point for recycling of such hazardous
waste. Isolated collection and proper recovery of your
electronic and electrical waste equipment at the time of

disposal will allow us to help conserve natural resources.

Moreover, proper recycling of the electronic and electrical
waste equipment will ensure safety of human health and
environment. For more information about electronic and
electrical waste equipment disposal, recovery, and collection
points, please contact your local city center, household waste
disposal service, shop from where you purchased the
equipment, or manufacturer of the equipment.
Do dispose according to the local laws and regulations of your
region.

Languages & Input

Click on Settings—Languages & Input—Keyboard (Virtual)---

Manage Keyboards (Choose the keyboard Mkey) --- Open

New message window --- Select keyboard and choose the
Mkey --- Click on Globe icon to choose preferred language for
Input.

Mobile phone supports all the below mentioned Indian Official
Languages for readability test as per IS 16333(Part-3):2017
ASSAMESE, BANGLA, BODO, DOGRI, GUJARATI, HINDI,
KANNADA, KASHMIRI, KONKANI, MAITHILI, MALAYALAM,
MANIPURI (BENGALI), MANIPURI (MEETEI MAYEK),
MARATHI, NEPALI, ODIA(ORIYA), PANJABI(PUNJABI),
SANTHALI (OI CHIKI), SANTHALI (DEVANAGRI), SANSKRIT,
SINDHI(DEVANAGARI), TAMIL, TELUGU, URDU, ENGLISH

This mobile supports inputting for below mentioned Indian

Official Language as per IS 16333(Part-3):2017

HINDI , ENGLISH , BANGLA

For Product Support

Customer Care No: 1800 2588 110

(Timing: Monday to Saturday between 10:00AM- 7:00PM)
Customer care Email ID:
[e-mail]
Website: www.infocusindia.co.in

Installing SIM Card and Memory Card

1. Put the thimble tool into the hole near SIM card tray,
then push until card tray pop up, and then pull out the
card with hand.

2. Put the SIM1/SD into the card slot or put the
SIM1/SIM2 into the card slot as below picture:
Then push the tray into the phone card slot.