InFocus HW-COMMANDER-2 User Manual

Batteries: The remote uses two (2) AA batteries. Install batteries by removing the cover from the back of the remote, aligning

the + and - ends of the batteries, pushing them into place, and replacing the cover.

Operation: Point the remote at the projector or at the screen (not at the video source or computer). The maximum operating
distance is 30 feet (9.14m).

Buttons and controls: Refer to your projector’s reference guide for details on remote functions.

• Power - turns the projector on and off

• Laser - lights the laser pointer (CAUTION: Do not stare into the laser beam. Beam is emitted from front of remote)

• Help - shows interactive help for common picture and connection problems*

• Previous, Next - moves backwards and forwards through your presentation**

• Mouse control - moves mouse pointer**

• Left, Right - presses mouse buttons**

• Volume - adjusts sound level

• Custom - can be assigned a special function (older projectors may call this Effect instead)

• Source - switches between sources

• Blank - shows a blank screen instead of the source

• Presets - selects stored settings

• Mute - mutes sound

• Auto Image - resynchronizes the projector to the source

• Keystone - adjusts squareness of the image

• Overscan - removes noise around the edges of the image

• Resize - changes the aspect ratio

• Source 1, 2, 3 - directly accesses specific sources

• Menu - shows the projector’s menu system

• - navigate menu items and adjust settings

• Select - confirm menu choices

• Backlight (side of remote) - lights remote buttons

Commander 2 Remote Control

Model: HW-COMMANDER-2

Laser Information

Radiation specification:

• Laser Radiation Class II product; wavelength 650nm; maximum output 1mW

• Remote control complies with applicable requirements of 21 CFR 1040.10

• Remote control complies with applicable requirements of IEC 60825-1:Am 1. 1997

Location of laser beam

warning label on back of
remote:

laser button
(see laser
information)

backlight button
(side of remote)

mouse control

power button

connector for
wired remote
capability
included on some
projectors. Use a

shielded 2.5mm

stereo jumper

cable up to 50

feet long

(15.24m).

Batteries are not
required in the
remote when
cable is
connected.

See other side for warranty and troubleshooting.

*Help, , and keys only function on
supported projectors.

**Presentation and mouse functions

require a USB or DisplayLink

connection between the projector and
computer.

’ ’

’

’

009-1336-00 *009-1336-00*