Infinity Drain TD 50 User Manual

TD 50 Series

TD 50│Tile Drain Series

- 12 gauge 316 Stainless Steel Frame and Body

- Incorporates tile or solid surface material within the grate frame

- ¾” depth inside frame for material

- ¼” drainage gap

- Indoor or outdoor use

- Works with 2″ clamp down floor drain with 2″ throat (strainer size)

- Uses Hot Mop, Lead Pan, PVC Vinyl Liner, Rubber Liner (Chloraloy™)

Copper Pan or Fiberglass waterproofing

- Grate can be removed completely for cleaning

- Flow rate 9 GPM per outlet*

Finishes:

Satin Stainless

_____

Polished Stainless

_____

Installation (TD) Center Drain

Complete Kits:

TD 50-2I SS Clamp Down Drain Cast Iron
TD 50-2I PS Clamp Down Drain Cast Iron
TD 50-2A SS Clamp Down Drain ABS
TD 50-2A PS Clamp Down Drain ABS
TD 50-2P SS Clamp Down Drain PVC
TD 50-2P PS Clamp Down Drain PVC

Components:

TA 6520 20” Stainless Steel Grate
IC 6520 20” Stainless Steel Channel
TNAS Stainless Steel Threaded Nipple
CDI 22 Clamp Down Drain Cast Iron
CDP 22 Clamp Down Drain PVC
CDA 22 Clamp Down Drain ABS
TKEY Lift Out Key

Optional Components:

TNRN Stainless Steel Threaded Nipple,
(3" extension)

UCP 2 Universal 2” Clamping Plate
UCP 4 Universal 4” Clamping Plate
ERB Eccentric Reducer Bushing 4” x 2”

Infinity Drain

18 Secatoag Avenue
Port Washington, NY 11050
Phone: [phone]
Fax: [phone]
www.InfinityDrain.com

Dimension are subject to Manufacturers tolerance and change without notice. We can assume no responsibility for use of superseded or void data.

Note: Installer must verify all rough-in

dimensions prior to installation and consult
local and national codes. Conformity and
compliance to local and national codes
are the responsibility of the installer.

Page 1 of 2

REV. 08.01.2013

TD 50-2 Specifications

TD 50-2I
20” x 3” Kit with Cast Iron Drain Body
No Hub Outlet

(20” L x 3” W x 1 11/16” H)
1 - TA 6520 Grate
1 - IC 6520 Channel
1 - CDI 22 Clamp Down Drain Cast Iron

TD 50-2A
20” x 3” Kit with ABS Drain Body
No Hub Outlet

(20” L x 3” W x 1 11/16” H)
1 - TA 6520 Grate
1 - IC 6520 Channel
1 - CDA 22 Clamp Down Drain ABS

TD 50-2P
20” x 3” Kit with PVC Drain Body
No Hub Outlet

(20” L x 3” W x 1 11/16” H)
1 - TA 6520 Grate
1 - IC 6520 Channel
1 - CDP 22 Clamp Down Drain PVC

Infinity Drain

18 Secatoag Avenue
Port Washington, NY 11050
Phone: [phone]
Fax: [phone]
www.InfinityDrain.com

Dimension are subject to Manufacturers tolerance and change without notice. We can assume no responsibility for use of superseded or void data.

Note: Installer must verify all rough-in

dimensions prior to installation and consult
local and national codes. Conformity and
compliance to local and national codes
are the responsibility of the installer.

Page 2 of 2

REV. 08.01.2013