
S-TIF 65 Series
S-TIF 65│Site Sizeable
- Modify length and locate outlet on-site
- Indoor or outdoor use
- Incorporates tile or solid surface material up to 3/4” thick within the
grate frame
- 316 stainless steel grate
- PVC channel
- Works with 2″ clamp down floor drain with 2″ throat (strainer size)
- Uses Hot Mop, Lead Pan, PVC Vinyl Liner, Rubber Liner (Chloraloy™)
Copper Pan or Fiberglass waterproofing
- Grate can be removed completely for cleaning
- Flow rate 9 GPM per outlet*
Finishes:
Satin Stainless
_____
Polished Stainless
_____
Installation (S) Site Sizable
Complete Kits:
S-TIF 6540 40″ Complete Kit
S-TIF 6548 48″ Complete Kit
S-TIF 6560 60″ Complete Kit
S-TIF 6572 72″ Complete Kit
S-TIF 6596 96″ Complete Kit
Longer lengths for indoor
or outdoor installations.
Components:
TA 6540 40″ Stainless Steel Grate
TA 6548 48″ Stainless Steel Grate
TA 6560 60″ Stainless Steel Grate
G 6536 36″ PVC Channel
G 6540 40″ PVC Channel
G 6548 48″ PVC Channel
G 6560 60″ PVC Channel
G 6580 80″ PVC Channel
G 6596 96″ PVC Channel
G 65108 108″ PVC Channel
E 65 PVC Stop End
S 50 PVC Threaded Nipple
TIF PL TIF Plates
TKEY Lift Out Key
Add Clamp Down Drain:
CDI 22 Clamp Down Drain Cast Iron
CDA 22 Clamp Down Drain ABS
CDP 22 Clamp Down Drain PVC
2” clamp down drain not
included in kit
Optional Components:
F65 Non Treaded PVC Outlet
GJC 65 PVC Straight Joiner Strip
GAM 65 PVC 90° Angle Joiner
TNRN-P PVC Threaded Nipple, (extends
2⅜" to the S 50 PVC Threaded Outlet)
UCP 2 Universal 2” Clamping Plate
UCP 4 Universal 4” Clamping Plate
ERB Eccentric Reducer Bushing 4”x2”
Infinity Drain
18 Secatoag Avenue
Port Washington, NY 11050
Phone: 516.767.6786
Fax: 516.740.3066
www.InfinityDrain.com
Dimension are subject to Manufacturers tolerance and change without notice. We can assume no responsibility for use of superseded or void data.
Note: Installer must verify all rough-in
dimensions prior to installation and consult
local and national codes. Conformity and
compliance to local and national codes
are the responsibility of the installer.
Page 1 of 2
REV. 08.01.2013

S-TIF 6596 Specifications
S-TIF 6596 SS
96″ Complete Kit Includes:
(96 ⅛" l x 2 ⅞" w x 1⅝" h)
2 - TA 6548 Tile Insert Frame
1 - G 6596 PVC Channel
2 - E 65 PVC End Stop
2 - S 50 PVC Threaded Outlet
1- TKEY Lift Out Key
Infinity Drain
18 Secatoag Avenue
Port Washington, NY 11050
Phone: 516.767.6786
Fax: 516.740.3066
www.InfinityDrain.com
Dimension are subject to Manufacturers tolerance and change without notice. We can assume no responsibility for use of superseded or void data.
Note: Installer must verify all rough-in
dimensions prior to installation and consult
local and national codes. Conformity and
compliance to local and national codes
are the responsibility of the installer.
Page 2 of 2
REV. 11.07.2013