Infinity Drain S-AS 6560 User Manual

Download

S-AS 65 Series

S-AS 65│Site Sizeable

- Modify length and locate outlet on-site

- Indoor or outdoor use

- 316 Wedge Wire stainless steel grate

- Stainless Steel channel

- Works with 2″ clamp down floor drain with 2″ throat (strainer size)

(not included)

- Uses Hot Mop, Lead Pan, PVC Vinyl Liner, Rubber Liner (Chloraloy™)

Copper Pan or Fiberglass waterproofing

- Grate can be removed completely for cleaning

- Flow rate 21 GPM per outlet*

*Flow rate measured at outlet only. Measurement does not account

for water in channel or sheeting on shower floor.

Finishes:

Satin Stainless

_____

Polished Stainless

_____

Complete Kits:

S-AS 6536 36″ Complete Kit S-AS 6548 48″ Complete Kit S-AS 6560 60″ Complete Kit S-AS 6572 72″ Complete Kit S-AS 6596 96″ Complete Kit

Longer lengths for indoor or outdoor installations.

Components:

SA 6536 36″ Stainless Steel Grate SA 6548 48″ Stainless Steel Grate SA 6560 60″ Stainless Steel Grate SC 6548 48″ Stainless Open Ended Channel SC 6596 96″ Stainless Open Ended Channel LC 6528 28″ Stainless Closed Ended Channel LC 6540 40″ Stainless Closed Ended Channel LC 6552 52″ Stainless Closed Ended Channel LC 6564 64″ Stainless Closed Ended Channel LC 6588 88″ Stainless Closed Ended Channel LF 65 8″ Stainless Steel Outlet Section GJS 65 Stainless Steel Joiner Strip TNAS Threaded Nipple Sikaflex 1a Construction Sealant

Installation (S) Site Sizable

Add Clamp Down Drain:

CDA 22 Clamp Down Drain ABS CDI 22 Clamp Down Drain Cast Iron CDP 22 Clamp Down Drain PVC

2” clamp down drain not

included in kit

Optional Components:

SLA 65 Stainless Steel 90° Angle Joiner TNRN Stainless Steel Threaded Nipple (3"

extension) UCP 2 Universal 2” Clamping Plate UCP 4 Universal 4” Clamping Plate ERB Eccentric Reducer Bushing 4”x2” SE 65 Stainless Steel End Section

Infinity Drain

18 Secatoag Avenue Port Washington, NY 11050 Phone: 516.767.6786 Fax: 516.740.3066 www.InfinityDrain.com

Dimension are subject to Manufacturers tolerance and change without notice. We can assume no responsibility for use of superseded or void data.

Note: Installer must verify all rough-in

dimensions prior to installation and consult local and national codes. Conformity and compliance to local and national codes are the responsibility of the installer.

Page 1 of 2

REV. 08.01.2013

S-AS 6560 Specifications

AS 6560 60″ Complete Kit Includes:

(60 ⅛" l x 2 ⅞" w x 1" h) 1 - SA 6560 Stainless Steel Grate 1 - LC 6552 Stainless Steel Channel 1 - LF 65 8" Outlet Section Stainless Steel 2 - GJS 65 All Stainless Joiner Strip 1 - TNAS Threaded Nipple 1 - Sikaflex 1a Construction Sealant