S-AG 100 Series
S-AG 100│Site Sizeable
- Modify length and locate outlet on-site
- Indoor or outdoor use
- 316 Wedge Wire stainless steel grate
- PVC channel
- Works with 2″ clamp down floor drain with 2″ throat (strainer size)
(not included)
- Uses Hot Mop, Lead Pan, PVC Vinyl Liner, Rubber Liner (Chloraloy™)
Copper Pan or Fiberglass waterproofing
- Grate can be removed completely for cleaning
- Flow rate 9 GPM per outlet*
*Flow rate measured at outlet only. Measurement does not account
for water in channel or sheeting on shower floor.
Finishes:
Satin Stainless
_____
Polished Stainless
_____
Installation (S) Site Sizable
Complete Kits:
S-AG 10048 48″ Complete Kit
S-AG 10096 96″ Complete Kit
Longer lengths for indoor
or outdoor installations.
Components:
A 10048 48″ Stainless Steel Grate
G 10048 48″ PVC Channel
G 10096 96″ PVC Channel
E 100 PVC Stop End
S 50 PVC Threaded Outlet
Add Clamp Down Drain:
CDA 22 Clamp Down Drain ABS
CDI 22 Clamp Down Drain Cast Iron
CDP 22 Clamp Down Drain PVC
2” clamp down drain not
included in kit
Optional Components:
F 65 PVC Non-Threaded Outlet
F 100 PVC 4” Non-Treaded Outlet
GJ 100 PVC Straight Joiner Strip
GA 100 PVC 90° Angle Joiner
TNRN-P PVC Threaded Nipple, (extends
2⅜" to the S 50 PVC Threaded Outlet)
UCP 2 Universal 2” Clamping Plate
UCP 4 Universal 4” Clamping Plate
ERB Eccentric Reducer Bushing 4”x2”
Infinity Drain
18 Secatoag Avenue
Port Washington, NY 11050
Phone: 516.767.6786
Fax: 516.740.3066
www.InfinityDrain.com
Dimension are subject to Manufacturers tolerance and change without notice. We can assume no responsibility for use of superseded or void data.
Note: Installer must verify all rough-in
dimensions prior to installation and consult
local and national codes. Conformity and
compliance to local and national codes
are the responsibility of the installer.
Page 1 of 2
REV. 08.01.2013
S-AG 10048 Specifications
AG 10048
48″ Complete Kit Includes:
(47 ¼" l x 4 3/16" w x 13/16” h)
1 - A 10048 Stainless Steel Grate
1 - G 10048 PVC Channel
2 - E 100 End Section
1 - S50 Treaded Outlet
Add Clamp Down Drain:
CDA 22 Clamp Down Drain ABS
CDI 22 Clamp Down Drain Cast Iron
CDP 22 Clamp Down Drain PVC
2” clamp down drain not
included in kit
Infinity Drain
18 Secatoag Avenue
Port Washington, NY 11050
Phone: 516.767.6786
Fax: 516.740.3066
www.InfinityDrain.com
Dimension are subject to Manufacturers tolerance and change without notice. We can assume no responsibility for use of superseded or void data.
Note: Installer must verify all rough-in
dimensions prior to installation and consult
local and national codes. Conformity and
compliance to local and national codes
are the responsibility of the installer.
Page 2 of 2
REV. 08.01.2013
Loading...