Infinity Drain RTD 15 User Manual

RTD 15 Series

RTD 15│Tile Drain Series

- Cast Brass Frame and Body– overall dimension 4¾″

- Tile Pan Diameter 3¾″ inside dimension x ⅜″ inside depth

- 3/4” depth inside frame for material

- ¼″ drainage gap

- Indoor or outdoor use

- Commercial grade large drain body (Cast Iron, PVC or ABS)

with 4” throat

- Available with a 2” or 3” outlet

- Uses Hot Mop, Lead Pan, PVC Vinyl Liner, Rubber Liner (Chloraloy™)

Copper Pan or Fiberglass waterproofing

- Grate can be removed completely for cleaning

- Requires traditional 4-way floor pitch

- Flow rate 9 GPM with 2” outlet

- Flow rate 21 GPM with 3’ outlet

Finishes:

_____

Polished Stainless

Installation (TD) Center Drain

Complete Kits:

RTD 15-2I PS Clamp Down Drain Cast Iron
RTD 15-3I PS Clamp Down Drain Cast Iron
RTD 15-2A PS Clamp Down Drain ABS
RTD 15-3A PS Clamp Down Drain ABS
RTD 15-2P PS Clamp Down Drain PVC
RTD 15-3P PS Clamp Down Drain PVC

Components:

R 15A 5” Round Tile Drain Strainer Only

CDI 42 Clamp Down Drain Cast Iron
CDI 43 Clamp Down Drain Cast Iron
CDA 42 Clamp Down Drain ABS
CDA 43 Clamp Down Drain ABS
CDP 42 Clamp Down Drain PVC
CDP 43 Clamp Down Drain PVC

Optional Components:

UCP 4 Universal 4” Clamping Plate

Infinity Drain

18 Secatoag Avenue
Port Washington, NY 11050
Phone: [phone]
Fax: [phone]
www.InfinityDrain.com

Dimension are subject to Manufacturers tolerance and change without notice. We can assume no responsibility for use of superseded or void data.

Note: Installer must verify all rough-in

dimensions prior to installation and consult
local and national codes. Conformity and
compliance to local and national codes
are the responsibility of the installer.

Page 1 of 2

REV. 08.01.2013

RTD 15-2 Specifications

RTD 15-2I

5” diameter with Cast Iron Drain Body
2” Outlet

(4¾″ diameter x ¾” H)
1 - R 15 A Tile Drain Strainer
1 - CDI 42 Clamp Down Drain Cast Iron

RTD 15-2A

5” diameter with ABS Drain Body
2” Outlet

(4¾″ diameter x ¾” H)
1 - R 15 A Tile Drain Strainer
1 - CDA 42 Clamp Down Drain ABS

RTD 15-2P

5” diameter with ABS Drain Body
2” Outlet

(4¾″ diameter x ¾” H))
1 - R 15 A Tile Drain Strainer
1 - CDP 42 Clamp Down Drain PVC

Infinity Drain

18 Secatoag Avenue
Port Washington, NY 11050
Phone: [phone]
Fax: [phone]
www.InfinityDrain.com

Dimension are subject to Manufacturers tolerance and change without notice. We can assume no responsibility for use of superseded or void data.

Note: Installer must verify all rough-in

dimensions prior to installation and consult
local and national codes. Conformity and
compliance to local and national codes
are the responsibility of the installer.

Page 2 of 2

REV. 08.01.2013