Infinity Drain FXAS 12536 User Manual

Page 1
FXAS 125 Series
FXAS 125│Fixed Length
- 12 gauge 316 Stainless Steel grate and channel
- Pre-pitched channel with “Fixed” lengths and “Fixed” center outlet
- Not site sizeable
- Indoor or outdoor use
- 4″ clamp down floor drain with 3″ throat (strainer size)
Copper Pan or Fiberglass waterproofing
- Grate can be removed completely for cleaning
- Flow rate 21 GPM per outlet*
*Flow rate measured at outlet only. Measurement does not account for water in channel or sheeting on shower floor.
Finishes:
Satin Stainless
_____
Polished Stainless
_____
Installation (FX) Fixed
Complete Kits:
FXAS 12532 32″ Complete Kit FXAS 12536 36″ Complete Kit FXAS 12542 42″ Complete Kit FXAS 12548 48″ Complete Kit FXAS 12560 60″ Complete Kit
Components:
SA 12532 32″ Stainless Steel Grate SA 12536 36″ Stainless Steel Grate SA 12542 42″ Stainless Steel Grate SA 12548 48″ Stainless Steel Grate SA 12560 60″ Stainless Steel Grate
XC 12532 32″ Stainless Steel Fixed Channel XC 12536 36″ Stainless Steel Fixed Channel XC 12542 42″ Stainless Steel Fixed Channel XC 12548 48″ Stainless Steel Fixed Channel XC 12560 60″ Stainless Steel Fixed Channel
TN4A Stainless Steel Threaded Nipple CDI 43 Cast Iron Drain Body
Additional Clamp Down Drains:
CDA 43 Clamp Down Drain ABS CDP 43 Clamp Down Drain PVC CDIT 43 Clamp Down Drain Cast Iron (Threaded Outlet) CDIC 43 Clamp Down Drain Cast Iron (Inside Caulk Outlet)
Optional Components:
UCP 4 Universal 4” Clamping Plate
Infinity Drain
18 Secatoag Avenue Port Washington, NY 11050 Phone: 516.767.6786 Fax: 516.740.3066 www.InfinityDrain.com
Dimension are subject to Manufacturers tolerance and change without notice. We can assume no responsibility for use of superseded or void data.
Note: Installer must verify all rough-in
dimensions prior to installation and consult local and national codes. Conformity and compliance to local and national codes are the responsibility of the installer.
Page 1 of 2
REV. 08.01.2013
Page 2
FXAS 12536 Specifications
FXAS 12536 36″ Complete Kit Includes:
(36 ⅛" l x 5 ⅜" w x 1" h) 1 - SA 12536 Stainless Steel Grate 1 - XC 12536 Fixed Channel 1 - TN4A Threaded Nipple
1- CDI 43 Cast Iron Drain Body
Infinity Drain
18 Secatoag Avenue Port Washington, NY 11050 Phone: 516.767.6786 Fax: 516.740.3066 www.InfinityDrain.com
Dimension are subject to Manufacturers tolerance and change without notice. We can assume no responsibility for use of superseded or void data.
Note: Installer must verify all rough-in
dimensions prior to installation and consult local and national codes. Conformity and compliance to local and national codes are the responsibility of the installer.
Page 2 of 2
REV. 08.01.2013
Loading...