Infinity KAPPA PERFECT 6-1 User Manual

®

KAPPASERIES

6.1

6.5" Component System

INSTRUCTIONS

Thank youfor purchasing an Infinity Kappa Perfect compo-

nent system. The Kappa Perfect6.1 has been engineered to provide
the most accurate sonic reproduction possible. Over the years, we
at Infinity have listened to hundreds of automotive speakers and we
think these are the best. We hope you agree.

This manual includes information that will make your installation
as simple and trouble-free as possible. It also provides detailed tech­nical information that will help an experienced installer optimize
speaker placement and crossover adjustment. Please study this
manual before you begin your installation. Remember to send in
your warranty registration card, and keep your sales receipt some­where safe in case you need warranty service.

IMPORTANT

1

2

–

+

SPEAKER PLACEMENT

TWEETER INSTALLATION

Installation of automotive stereo compo­nents can require extensive experience per­forming a variety of mechanical and electri­cal procedures. Although these instructions
explain how to install a Kappa Perfect6.1
component system in a general sense, they
do not show the exact installation method
for your particular car. If you feel you may
not have the necessary tools or experience,
ask your authorized Infinity car-audio dealer
about professional installation options.

WARNING

Playing loud music in your automobile
can permanently damage your hearing as
well as hinder your ability to hear traffic. We
recommend listening at low volume while
driving. Infinity accepts no liability for hear­ing loss, bodily injury or property damage
resulting from use or misuse of this product.

A NOTE ABOUT SYSTEM PERFORMANCE

For the best performance possible, the
Kappa Perfect6.1 should be used with a
two-channel amplifier with output power of
at least 35W RMS per channel. The passive
crossover contains impedance-compensating
circuitry and has been computer-optimized
for the flattest possible frequency response
with the tweeter flush-mounted on axis
with the listener. The combined responses
of the speakers and passive crossover
constitute 4th-order Linquitz-Riley
alignment and cannot be duplicated
any electronic crossover currently available
for car-audio use. Consequently, bi-amping
the Perfect6.1 with an electronic crossover
is not recommended.

acoustic

with

Figures 1–4 show possible speak er place­ments in the order of most desirable to
least desirable. Kick-panel mounting will
provide the best staging and imaging in
most vehicles.

TWEETER
and
WOOFER
on kick panel

Figure 1.
Mounting the woofer and tweeter in
the kick panels

TWEETER

on kick panel

WOOFER
in factory­door location

Figure 2.
Mounting the woofer in the door and
the tweeter in the kick panel

Fig 1

Fig 2

TWEETER
in high/forward
location on door

WOOFER
in factory­door location

Figure 3.
Mounting the woofer and tweeter in
the doors

TWEETER
on dash

WOOFER
in factory­door location

Figure 4.
Mounting the woofer in the door and
the tweeter in the dash

Fig 3

Fig 4

Figure 5.
Surface-mounting the tweeter

1

2

Figure 6.
Flush-mounting the tweeter

WOOFER INSTALLATION

®

TWEETER LEVEL

–4dB

J1 J2

J1

J2

0dB
+5dB

KPX00

J1

J2

Tweeter level
+5dB

Tweeter level

0dB

(default)

To woofer

To tweeter

To amplifier

speaker output

J1

J2

Tweeter level
–4dB

J1

J2

J1

®

ELECTRICAL CONNECTIONS AND CROSSOVER ADJUSTMENTS

SPECIFICATIONS

System

Frequency Response: 75Hz – 23kHz, ±3dB
Power Handling: 100W RMS, 400W Peak
Nominal Impedance: 4 Ohms
Sensitivity: 90dB
Crossover Frequency: 3.5kHz, 24dB/oct.

Linquitz-Riley Acoustic

Figure 7.
Mounting the woofer where
there is no factory speaker location

Figure 8.
Mounting the woofer in
standard 5-1/4" holes (in many
Japanese and American automobiles)

Figure 9.
Mounting the woofer in
165mm holes (in many European
and American automobiles)

Figure 10.
Connecting the speakers and the amplifier
to the crossover

Figure 11.
Adjust the crossover using the jumpers
provided

Thiele and Small Parameters

Revc: 3.45 3.31
Levc: 0.37 0.02
Sd: 0.0113 0.0005
BL: 6.37 1.99
Vas: 11.43 0.0016
Cms: 630.36 44
Mms: 18.94 0.3064
Mmd: 18.25 0.3
Fs: 46.05 1370.65
Qms: 3.44 5.4
Qes: 0.465 2.19
Qts: 0.41 1.56
T op-Plate Thickness: 9/32" (7 .1 15mm) na
Voice-Coil Length: 9/16" (14mm) na
Voice-Coil Diameter: 1-1/2" (38.1mm) 1" (25.4mm)
Xmax: 1/8" (3.44mm) na
Mounting Depth: 2-3/4" (70mm) 1" (25.4mm)
Cut-Out Diameter: 5-1/16" (129mm) 1-3/4"

Woofer Tweeter

(45mm)

SYSTEM RESPONSE CURVES

dB spl

110

100

90

80

70

60

50

40

30

2 re u ncy 100

Figure 12.
System frequency response

dB spl

110

100

90

80

70

60

50

40

30

20 Fre quency 100

Figure 13.
Component frequency response

Sound Pressure Level

1k Hz 5k

500

Kappa Perfect6.1 (flat setting)
Kappa Perfect6.1 (+5dB setting)
Kappa Perfect6.1 (–4dB setting)

Sound Pressure Level

1k Hz 5k

500

Kappa Perfect6.1 Woofer
Kappa Perfect6.1 Tweeter (flat setting)
Kappa Perfect6.1 Tweeter (–4dB setting)
Kappa Perfect6.1 Tweeter (+5dB setting)

Passive Network Transfer Function:dB

Deg

180

135

90

45

0

-45

-90

-135

C

-180

10k

20k0 Fqe

Deg

180

135

90

45

0

-45

-90

-135

C

-180

10k

20k

30.0

10.0

3.0

1.0

0.3

20 Fre quency 100

Figure 14.
System impedance

30.0

10.0

3.0

1.0

0.3

20 Fre quency 100

Figure 15.
Woofer and tweeter impedance

Impedance Measurement Ohms

1kk Hz 5k

500

Kappa Perfect6.1 (flat setting)
Kappa Perfect6.1 (+5dB setting)
Kappa Perfect6.1 (–4dB setting)

Impedance Measurement Ohms

1k Hz 5k

500

Kappa Perfect6.1 Tweeter
Kappa Perfect6.1 Woofer

Deg

180

135

90

45

0

-45

-90

-135

C

-180

10k

20k

Deg

180

135

90

45

0

-45

-90

-135

C

-180

10k

20k

dB

-40

-50

-60

-70

-80

-90

-100

-110

-120

20 Fre quency 100

Figure 16.
Network response (considering speaker
impedances and resistive load)

Kappa Perfect6.1 Woofer
Kappa Perfect6.1 Tweeter (flat setting)
Kappa Perfect6.1 Tweeter (–4dB setting)
Kappa Perfect6.1 Tweeter (+5dB setting)

1k Hz 5K

500

10K

DECLARATION OF CONFORMITY

We, Infinity Systems A/S

Kongevejen 194B
DK-3460 Birkerød

DENMARK

declare in own responsibility, that the product described in this owner’s manual is in compliance with
technical standards:
EN 50081-1:1992
EN 50082-1:1992

®

Infinity Systems, Inc. • 250 Crossways Park Drive
Woodbury, NY 11797 USA • [phone]
FAX [phone] • Part No: KAP6.1OM

Steen Michaelsen
Infinity Systems A/S
Birkerød. DENMARK. 9/99

A Harman International Company

C

20K