Infinity 6030CS User Manual
4-1/4"
110mm
2-1/16"
51mm
4-1/2"
115mm
6-5/16"
159mm
3-9/16"
90mm
1-13/16"
45mm
3-1/4"
84mm
5"
127mm
2-3/8"
60mm
2-1/16"
52mm
1/2"
19mm
7/8"
22mm
11/16"
17mm
1-3/4"
44mm
1-1/8"
30mm
s
car audio retailer can help you determine the length
car audio retailer can help you determine the length
car audio retailer can help you determine the length
car audio retailer can help you determine the length
®
2 Ohms
®
90W
®
2 Ohms
®
2-Way Component
6030cs
Re
f
erence Series speakers are warranted against defects.
2-W
ay Component
6030c
Re
f
erence Series speakers are warranted against defects.
2-W
ay Component
6030cs
TIONS
Reference Series speakers are warranted against defects.
2-Way Component
6030cs
a
t
ion of the speaker’s warranty depends on the laws in the country in which it
a
tion of the speaker’s warranty depends on the laws in the country in which it
RRANTY:
ty (2.83V,1m): 93dB
RRANTY:
of y
our warranty.To register your product,please visit www.infinitysystems.com.
was purchased.Your local Infinity
T
he dur
W
ARRANTY:Reference Series speakers are warranted against defects.
Sensi
tivity (2.83V, 1m): 93dB
Frequency Response: 53Hz – 21kHz
Power Handling,Peak: 270W
Power Handling,RMS: 90W
Impedance:
Type: 6-1/2" (160mm)
SPECIFICATIONS
of your warranty.To register your product,please visit www.infinitysystems.com.
was purchased.Your local Infinity
T
he dur
W
A
Sensi
t
ivi
Frequency Response: 53Hz – 21kHz
Power Handling,Peak: 270W
P
o
w
er Handling,
Impedance: 2 Ohms
Type: 6-1/2" (160mm)
SPECIFICATIONS
of your warranty.To register your product,please visit www.infinitysystems.com.
was purchased.Your local Infinity
The duration of the speaker’s warranty depends on the laws in the country in which it
W
A
Sensi
t
ivity (2.83V,1m): 93dB
Frequency Response: 53Hz – 21kHz
Power Handling,Peak: 270W
Power Handling,RMS: 90W
Impedance:
Type: 6-1/2" (160mm)
SPECIFIC
of your warranty.To register your product,please visit www.infinitysystems.com.
was purchased.Your local Infinity
The duration of the speaker’s warranty depends on the laws in the country in which it
WARRANTY:
Sensitivity (2.83V, 1m): 93dB
Frequency Response: 53Hz – 21kHz
Power Handling,Peak: 270W
Power Handling,RMS: 90W
Impedance: 2 Ohms
Type: 6-1/2" (160mm)
SPECIFICATIONS
s
car audio retailer can help you determine the length
car audio retailer can help you determine the length
car audio retailer can help you determine the length
car audio retailer can help you determine the length
®
2 Ohms
®
90W
®
2 Ohms
®
2-Way Component
6030cs
Re
f
erence Series speakers are warranted against defects.
2-W
ay Component
6030c
Re
f
erence Series speakers are warranted against defects.
2-W
ay Component
6030cs
TIONS
Reference Series speakers are warranted against defects.
2-Way Component
6030cs
RMS:
A
of y
our warranty.To register your product,please visit www.infinitysystems.com.
was purchased.Your local Infinity
T
he dur
a
t
ion of the speaker’s warranty depends on the laws in the country in which it
W
ARRANTY:Reference Series speakers are warranted against defects.
Sensi
tivity (2.83V, 1m): 93dB
car audio retailer can help you determine the length
®
Frequency Response: 53Hz – 21kHz
Power Handling,Peak: 270W
Power Handling,RMS: 90W
Impedance:
2 Ohms
2-Way Component
Type: 6-1/2" (160mm)
6030cs
SPECIFICATIONS
of your warranty.To register your product,please visit www.infinitysystems.com.
was purchased.Your local Infinity
T
he dur
a
tion of the speaker’s warranty depends on the laws in the country in which it
W
A
RRANTY:
Sensi
t
ivi
ty (2.83V,1m): 93dB
car audio retailer can help you determine the length
®
Re
f
erence Series speakers are warranted against defects.
Frequency Response: 53Hz – 21kHz
Power Handling,Peak: 270W
RMS:
er Handling,
90W
RMS:
P
o
w
Impedance: 2 Ohms
2-W
ay Component
Type: 6-1/2" (160mm)
6030c
s
SPECIFICATIONS
of your warranty.To register your product,please visit www.infinitysystems.com.
was purchased.Your local Infinity
The duration of the speaker’s warranty depends on the laws in the country in which it
W
A
RRANTY:
Sensi
t
ivity (2.83V,1m): 93dB
car audio retailer can help you determine the length
®
Re
f
erence Series speakers are warranted against defects.
Frequency Response: 53Hz – 21kHz
Power Handling,Peak: 270W
Power Handling,RMS: 90W
Impedance:
2 Ohms
2-W
ay Component
Type: 6-1/2" (160mm)
6030cs
A
SPECIFIC
A
TIONS
of your warranty.To register your product,please visit www.infinitysystems.com.
was purchased.Your local Infinity
The duration of the speaker’s warranty depends on the laws in the country in which it
WARRANTY:
car audio retailer can help you determine the length
®
Reference Series speakers are warranted against defects.
Sensitivity (2.83V, 1m): 93dB
Frequency Response: 53Hz – 21kHz
Power Handling,Peak: 270W
Power Handling,RMS: 90W
Impedance: 2 Ohms
2-Way Component
Type: 6-1/2" (160mm)
6030cs
SPECIFICATIONS
a
t
ion of the speaker’s warranty depends on the laws in the country in which it
a
tion of the speaker’s warranty depends on the laws in the country in which it
RRANTY:
ty (2.83V,1m): 93dB
RRANTY:
of y
our warranty.To register your product,please visit www.infinitysystems.com.
was purchased.Your local Infinity
T
he dur
W
ARRANTY:Reference Series speakers are warranted against defects.
Sensi
tivity (2.83V, 1m): 93dB
Frequency Response: 53Hz – 21kHz
Power Handling,Peak: 270W
Power Handling,RMS: 90W
Impedance:
Type: 6-1/2" (160mm)
SPECIFICATIONS
of your warranty.To register your product,please visit www.infinitysystems.com.
was purchased.Your local Infinity
T
he dur
W
A
Sensi
t
ivi
Frequency Response: 53Hz – 21kHz
Power Handling,Peak: 270W
P
o
w
er Handling,
Impedance: 2 Ohms
Type: 6-1/2" (160mm)
SPECIFICATIONS
of your warranty.To register your product,please visit www.infinitysystems.com.
was purchased.Your local Infinity
The duration of the speaker’s warranty depends on the laws in the country in which it
W
A
Sensi
t
ivity (2.83V,1m): 93dB
Frequency Response: 53Hz – 21kHz
Power Handling,Peak: 270W
Power Handling,RMS: 90W
Impedance:
Type: 6-1/2" (160mm)
SPECIFIC
of your warranty.To register your product,please visit www.infinitysystems.com.
was purchased.Your local Infinity
The duration of the speaker’s warranty depends on the laws in the country in which it
WARRANTY:
Sensitivity (2.83V, 1m): 93dB
Frequency Response: 53Hz – 21kHz
Power Handling,Peak: 270W
Power Handling,RMS: 90W
Impedance: 2 Ohms
Type: 6-1/2" (160mm)
SPECIFICATIONS
car audio retailer can help you determine the length
®
was purchased.Your local Infinity
T
he dur
a
tion of the speaker’s warranty depends on the laws in the country in which it
W
ARRANTY:Reference Series speakers are warranted against defects.
Sensi
tivity (2.83V, 1m): 93dB
of y
our w
arr
anty
.
T
o r
egist
er your product,please visit www.infinitysystems.com.
Frequency Response: 53Hz – 21kHz
Power Handling,Peak: 270W
P
o
w
90W
RMS:
er Handling,
Impedance: 2 Ohms
2-Way Component
T
6-1/2" (160mm)
6030c
s
ype:
SPECIFICATIONS
of your warranty.To register your product,please visit www.infinitysystems.com.
car audio retailer can help you determine the length
®
Re
f
erence Series speakers are warranted against defects.
was purchased.Your local Infinity
The duration of the speaker’s warranty depends on the laws in the country in which it
W
A
RRANTY:
Sensi
t
ivity (2.83V,1m): 93dB
Frequency Response: 53Hz – 21kHz
Power Handling,Peak: 270W
Power Handling,RMS: 90W
Impedance: 2 Ohms
2-Way Component
Type: 6-1/2" (160mm)
6030cs
A
TIONS
SPECIFIC
Qt 0.74
Qms 6.61
Qes 0.83
Fs (Hz) 84.3
Vas (l) 5.84
Cms (µm/N) 236
Sd (sq cm) 132.7
Mms (g) 15.10
DCR (ohms) 2.30
BL (T-m) 4.70
6030cs
Designed and engineered in the USA. Conception et design aux É.U.A.
alid serial number is r
A v
Features,specifications and appearance are subject to change without notice.
Les disposi
Harman Consumer Group, Inc.,8500 Balboa Blvd., Northridge,CA 91329 11797 USA
www.infinitysystems.com
© 2009 Harman International Industries,Incorporated. All rights reserved. Tous droits réservés.• Part No.REF6030CSOM4/09
Infinity is a trademark of Harman International Industries,Incorporated, registered in the United States and/or other countries.
I-Mount is a trademark of Harman International Industries,Incorporated.
Infini
I-Mount est une marque commerciale de Harman International Industries,Incorporated.
les car
ifs,
t
ty est une mar
or warranty coverage.Un numéro de série valable est exigé pour la couverture de la garantie.
ed f
equir
t l’aspect sont sujets au changement sans communication préalable.
iques e
térist
ac
que commerciale de Harman International Industries,Incorporated, déposée aux États-Unis et/ou dans d’autres pays.
Declaration of Conformity
Inc.
eau du Loir
oup,
Klaus Lebherz
Harman Consumer Gr
Château du Loir,France 4/09
Harman Consumer Gr
e,
W
2, route de Tours
72500 Chât
ance
r
F
e in own responsibility that the product described in this owner’s
declar
manual is in compliance with technical standards:
EN 61000-6-3:2001
EN 61000-6-1:2001
REFERENCE
6030cs
Inc.
oup,
1x
1
2x 4x 4x 4x 2x 2x 8x
2x2x 2x 2x 2x
1
2
4
3
1
2
3
1
2
3
2x2x2x 2x2x2x
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
eeter-level switch.The normal setting for
tw
h is the “0dB” position,which pro-
tc
this swi
vides an apparently “flat”response.Tweeter
output may be increased according to the
s pr
user’
axis placement (where the speaker does not
directly face the listening position), by setting the switch to the “+3dB”position.
TWEETER-LEVEL
CONTROL
his speaker syst
T
-le
er
t
ee
tw
this switch is the “0dB” position, which provides an apparently “flat”response.Tweeter
output may be increased according to the
user’s preference,or to compensate for offaxis placement (w
ectly face the listening position), by set-
dir
ting the switch to the “+3dB”position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
tch is the “0dB” position, which pro-
this swi
vides an apparently “flat”response.Tweeter
t ma
tpu
ou
s pr
user’
axis placement (where the speaker does not
directly face the listening position), by setting the switch to the “+3dB”position.
TWEETER-LEVEL
CONTROL
his speaker syst
T
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which provides an apparently “flat”response.Tweeter
output may be increased according to the
user’s preference,or to compensate for offaxis placement (where the speaker does not
directly face the listening position), by set-
ing the swi
t
or to compensate for off-
ence,
er
f
e
em is equipped wi
el switch.The normal setting for
v
here the speaker does not
y be increased according to the
erence,or to compensate for off-
f
e
em is equipped wi
h to the “+3dB” position.
tc
th a
th a
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
eeter-level switch.The normal setting for
tw
h is the “0dB” position,which pro-
tc
this swi
vides an apparently “flat”response.Tweeter
output may be increased according to the
s pr
user’
axis placement (where the speaker does not
directly face the listening position), by setting the switch to the “+3dB”position.
TWEETER-LEVEL
CONTROL
his speaker syst
T
-le
er
t
ee
tw
this switch is the “0dB” position, which provides an apparently “flat”response.Tweeter
output may be increased according to the
user’s preference,or to compensate for offaxis placement (w
ectly face the listening position), by set-
dir
ting the switch to the “+3dB”position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
tch is the “0dB” position, which pro-
this swi
vides an apparently “flat”response.Tweeter
t ma
tpu
ou
s pr
user’
axis placement (where the speaker does not
directly face the listening position), by setting the switch to the “+3dB”position.
TWEETER-LEVEL
CONTROL
his speaker syst
T
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which provides an apparently “flat”response.Tweeter
output may be increased according to the
user’s preference,or to compensate for offaxis placement (where the speaker does not
directly face the listening position), by set-
ing the swi
t
or to compensate for off-
ence,
er
f
e
em is equipped wi
el switch.The normal setting for
v
here the speaker does not
y be increased according to the
erence,or to compensate for off-
f
e
em is equipped wi
h to the “+3dB” position.
tc
th a
th a
TWEETER-LEVEL
CONTROL
his speaker syst
T
tweeter-level switch.The normal setting for
this swi
vides an appar
output may be increased according to the
user’s preference,or to compensate for offaxis placement (where the speaker does not
y face the listening position),by set-
tl
ec
dir
ting the switch to the “+3dB”position.
TWEETER-LEVEL
CONTROL
his speaker system is equipped with a
T
tweeter-level switch.The normal setting for
this swi
vides an appar
output may be increased according to the
user’s preference,or to compensate for offaxis placement (where the speaker does not
directly face the listening position), by setting the switch to the “+3dB”position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this swi
vides an apparently “flat”response.Tweeter
output may be increased according to the
s pr
user’
axis placement (where the speaker does not
directly face the listening position), by setting the switch to the “+3dB”position.
TWEETER-LEVEL
CONTROL
his speaker syst
T
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which provides an apparently “flat”response.Tweeter
output may be increased according to the
user’s preference,or to compensate for offaxis placement (where the speaker does not
directly face the listening position), by setting the switch to the “+3dB”position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which provides an appar
t ma
tpu
ou
s pr
user’
axis placement (where the speaker does not
directly face the listening position), by set-
ing the swi
t
TWEETER-LEVEL
CONTROL
his speaker syst
T
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which provides an appar
output may be increased according to the
user’s preference,or to compensate for offaxis placement (where the speaker does not
directly face the listening position), by set-
ing the swi
t
em is equipped wi
tch is the “0dB” position, which pro-
tch is the “0dB” position, which pro-
h is the
tc
er
f
e
y be increased according to the
erence,or to compensate for off-
f
e
lat”response.Tweeter
“f
y
entl
ently “flat” response.Tweeter
“0dB”position,which pro-
or to compensate for off-
ence,
em is equipped wi
y “flat” response.Tweeter
entl
“+3dB”
o the
h t
tc
em is equipped wi
t”
la
“f
y
entl
tch to the “+3dB” position.
th a
th a
ion.
t
posi
th a
esponse.Tweeter
r
ROTATING TWEETER
his component syst
T
™
I-Mount
an extremely versatile tweeter-mounting
system,which is designed to allow the
o be aimed t
er t
t
ee
tw
position.Since the tweeter’s output becomes
directional at extremely high frequencies,
aiming the tw
position will improve high-frequency
esponse and st
r
the mount
mounted in the proper location,rock the
tweeter element in the slot and rotate the
entire assembly to aim the tweeter toward
the listening position.Secure the small nut
to lock the angle,then tighten the large
hand nut to lock the rotational position.
RO
TATING TWEETER
This component system includes the
™
I-Mount
tweeter-mounting system, which is designed
to allow the tweeter to be aimed toward the
listening position.Since the tweeter’s output
becomes directional at extremely high
equencies, aiming the tweeter toward the
fr
ening posi
list
response and stereo imaging.Refer to
the mounting diagrams.With the tweeter
mounted in the proper location,rock the
er element in the slo
t
ee
tw
entire assembly to aim the tweeter toward
the listening position.Secure the small nut
o lock the angle, then tighten the large hand
t
nut to lock the rotational position.
TATING TWEETER
RO
his component syst
T
™
I-Mount
tweeter-mounting system, which is designed
to allow the tweeter to be aimed toward the
listening position.Since the tweeter’s output
becomes dir
equencies,
fr
listening position will improve high-frequency
response and stereo imaging.Refer to
the mount
mounted in the proper location,rock the
tweeter element in the slot and rotate the
entire assembly to aim the tweeter toward
the listening position.Secure the small nut
k the angle, then tighten the large hand
o loc
t
k the rotational position.
o loc
t t
nu
em includes the
5,859,917) f
ent no.
t
(pa
o
eeter toward the listening
ereo imaging.Refer to
ams.
ing diagr
feature,an extremely versatile
ion will improve high-frequency
t
em includes the
feature,an extremely versatile
ectional at extremely high
aiming the tw
ams.
ing diagr
ard the list
w
th the tweeter
i
W
t and r
eeter toward the
th the tw
i
W
eature,
ening
te the
a
t
o
ee
ter
ROTATING TWEETER
his component syst
T
™
I-Mount
tweeter-mounting system, which is designed
to allow the tweeter to be aimed toward the
ening posi
list
becomes directional at extremely high
frequencies,aiming the tweeter toward the
ening position will improve high-frequency
list
response and stereo imaging.Refer to
the mount
ed in the pr
mount
tweeter element in the slot and rotate the
entire assembly to aim the tweeter toward
the listening position.Secure the small nut
to lock the angle,then tighten the large hand
nut to lock the rotational position.
ROTATING TWEETER
This component system includes the
I-Mount™feature,an extremely versatile
tweeter-mounting system, which is designed
to allow the tweeter to be aimed toward the
listening position.Since the tweeter’s output
becomes directional at extremely high
frequencies,aiming the tweeter toward the
ening position will improve high-frequency
list
esponse and st
r
the mounting diagrams.With the tweeter
mounted in the proper location,rock the
tweeter element in the slot and rotate the
e assembl
ir
ent
the listening position.Secure the small nut
to lock the angle,then tighten the large hand
t to lock the rotational position.
nu
ROTATING TWEETER
This component system includes the
™
I-Mount
tweeter-mounting system, which is designed
to allow the tweeter to be aimed toward the
listening position.Since the tweeter’s output
becomes directional at extremely high
equencies, aiming the tweeter toward the
fr
ening posi
list
response and stereo imaging.Refer to
the mounting diagrams.With the tweeter
ed in the pr
mount
tweeter element in the slot and rotate the
entire assembly to aim the tweeter toward
the listening position.Secure the small nut
to lock the angle,then tighten the large hand
o lock the rotational position.
t t
nu
em includes the
e, an extremely versatile
ur
t
ea
f
Since the tw
ion.
t
ams.With the tweeter
ing diagr
er
y t
e,
ur
t
ea
f
ion will improve high-frequency
t
ion,
t
oper loca
eo imaging. Refer to
emel
t
ee
ion,
o aim the tw
an extr
oper loca
s output
er’
t
ee
rock the
oward
er t
t
y versatile
k the
oc
r
ROTATING TWEETER
This component system includes the
™
ur
t
ea
f
I-Mount
tweeter-mounting system, which is designed
to allow the tweeter to be aimed toward the
list
becomes directional at extremely high
equencies,
fr
listening position will improve high-frequency
esponse and stereo imaging.Refer to
r
the mount
mounted in the proper location,rock the
tweeter element in the slot and rotate the
entire assembly to aim the tweeter toward
the list
o lock the angle, then tighten the large hand
t
ut to lock the rotational position.
n
ROTATING TWEETER
his component syst
T
I-Mount
tweeter-mounting system, which is designed
o allo
t
listening position.Since the tweeter’s output
becomes directional at extremely high
frequencies,aiming the tweeter toward the
list
response and stereo imaging.Refer to
the mounting diagrams.With the tweeter
mount
tweeter element in the slot and rotate the
ent
the list
to lock the angle,then tighten the large hand
nut to lock the rotational position.
RO
This component system includes the
I-Mount
tw
to allow the tweeter to be aimed toward the
listening position.Since the tweeter’s output
becomes directional at extremely high
frequencies,aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging.Refer to
the mounting diagrams.With the tweeter
mount
tw
entire assembly to aim the tweeter toward
the listening position.Secure the small nut
to lock the angle,then tighten the large hand
nut to lock the rotational position.
ROTATING TWEETER
his component syst
T
I-Mount
tweeter-mounting system, which is designed
to allow the tweeter to be aimed toward the
list
becomes directional at extremely high
frequencies,aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging.Refer to
the mount
mount
tweeter element in the slot and rotate the
entire assembly to aim the tweeter toward
the list
to lock the angle,then tighten the large hand
nut to lock the rotational position.
tion.Since the tweeter’s output
ening posi
aiming the tw
ing diagr
ening posi
™
feature,an extremely versatile
w the tw
ening posi
tion will improve high-frequency
ed in the pr
y t
e assembl
ir
ening posi
TING
A
T
™
ture,an extremely versatile
ea
f
er-mounting system, which is designed
t
ee
ed in the pr
er element in the slo
t
ee
™
ure,an extremely versatile
t
ea
f
ion.
t
ening posi
ing diagr
ed in the pr
ening posi
emely versatile
an extr
e,
oward the
er t
t
ee
With the tweeter
ams.
tion.Secure the small nut
em includes the
ter to be aimed toward the
ee
oper location,rock the
o aim the tweeter toward
e the small nut
Secur
ion.
t
TWEETER
oper location,rock the
t and rotate the
em includes the
s output
er’
t
tion,rock the
e the small nu
Secur
ee
Since the tw
ams.With the tweeter
oper loca
ion.
t
t
ROTATING TWEETER
This component system includes the
™
ur
t
ea
f
I-Mount
tweeter-mounting system, which is designed
to allow the tweeter to be aimed toward the
list
becomes directional at extremely high
equencies,
fr
listening position will improve high-frequency
esponse and stereo imaging.Refer to
r
the mount
mounted in the proper location,rock the
tweeter element in the slot and rotate the
entire assembly to aim the tweeter toward
the list
o lock the angle, then tighten the large hand
t
ut to lock the rotational position.
n
ROTATING TWEETER
his component syst
T
I-Mount
tweeter-mounting system, which is designed
o allo
t
listening position.Since the tweeter’s output
becomes directional at extremely high
frequencies,aiming the tweeter toward the
list
response and stereo imaging.Refer to
the mounting diagrams.With the tweeter
mount
tweeter element in the slot and rotate the
ent
the list
to lock the angle,then tighten the large hand
nut to lock the rotational position.
RO
This component system includes the
I-Mount
tw
to allow the tweeter to be aimed toward the
listening position.Since the tweeter’s output
becomes directional at extremely high
frequencies,aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging.Refer to
the mounting diagrams.With the tweeter
mount
tw
entire assembly to aim the tweeter toward
the listening position.Secure the small nut
to lock the angle,then tighten the large hand
nut to lock the rotational position.
ROTATING TWEETER
his component syst
T
I-Mount
tweeter-mounting system, which is designed
to allow the tweeter to be aimed toward the
list
becomes directional at extremely high
frequencies,aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging.Refer to
the mount
mount
tweeter element in the slot and rotate the
entire assembly to aim the tweeter toward
the list
to lock the angle,then tighten the large hand
nut to lock the rotational position.
tion.Since the tweeter’s output
ening posi
aiming the tw
ing diagr
ening posi
™
feature,an extremely versatile
w the tw
ening posi
tion will improve high-frequency
ed in the pr
y t
e assembl
ir
ening posi
TING
A
T
™
ture,an extremely versatile
ea
f
er-mounting system, which is designed
t
ee
ed in the pr
er element in the slo
t
ee
™
ure,an extremely versatile
t
ea
f
ion.
t
ening posi
ing diagr
ed in the pr
ening posi
emely versatile
an extr
e,
oward the
er t
t
ee
With the tweeter
ams.
tion.Secure the small nut
em includes the
ter to be aimed toward the
ee
oper location,rock the
o aim the tweeter toward
e the small nut
Secur
ion.
t
TWEETER
oper location,rock the
t and rotate the
em includes the
s output
er’
t
tion,rock the
e the small nu
Secur
ee
Since the tw
ams.With the tweeter
oper loca
ion.
t
t
Loading...