Infinity 9613i, 6412cf, 6812cf, 9612i, 6012si User Manual

...
0 (0)
Infinity 9613i, 6412cf, 6812cf, 9612i, 6012si User Manual

4012i,5012i,6012i,6012si,9612i,

9613i,3012cf,6412cf,6412cfp,6812cf

 

s

n

i

 

t

r

u

ctio n

s

reference series

THANK YOU for purchasing Infinity’s Reference Series multielement automotive loudspeakers. We’ve organized this manual to make their installation as simple and trouble-free as possible. Please read it thoroughly before proceeding.

Remember to keep your sales receipt with this manual in a safe place so both are available for future reference.

IMPORTANT: Installation of automotive stereo components can require extensive experience with a variety of mechanical and electrical procedures. Although these instructions explain how to install Reference Series speakers in a general sense, they do not show the exact installation methods for your particular vehicle. If you do not feel you have the experience, do

not attempt the installation yourself; instead, ask your authorized Infinity car audio dealer about professional installation options.

WARNING: Playing loud music in an automobile can permanently damage your hearing, as well as hinder your ability to hear traffic.The maximum volume levels achievable with Infinity speakers, combined with high power amplification, may exceed safe levels for extended listening. We recommend using low volume levels when driving. Infinity accepts no liability for hearing loss, bodily injury, or property damage as a result of use or misuse of this product.

INSTALLATION WARNINGS AND TIPS

Always wear protective eyewear when using any tools.

Turn off all audio components and other electrical devices before you start. Disconnect the (–) negative lead from your vehicle’s battery.

Keep speakers in their package until final installation. When moving a speaker, always rest it with the cone or dome facing up. Never use force to install any speaker.

Check clearances on both sides of a planned mounting surface before drilling any holes or installing any screws. Remember that the screws can extend behind the surface.

At the installation sites, locate and make a note of all fuel lines, hydraulic brake lines, vacuum lines and electrical wiring. Use extreme caution when cutting or drilling in and around these areas.

CAUTION: In some cars, fuel tanks may be located directly beneath the rear deck. Check for adequate speaker basket clearance before considering this location!

Before drilling or cutting holes, use a utility knife to remove unwanted fabric or vinyl, to keep material from snagging in a drill bit or saw.

For door installations, check the clearance with the windows throughout the range of the window’s travel, and verify that a mounted speaker will not interfere with the window crank or power window mechanism.

If mounting speakers elsewhere, check for clearance around rear deck torsion bars, glove box or other structural elements.

Do not mount speakers where they will get wet.

INSTALLATION

Figure 1. Mounting the Reference Series speakers using supplied grille.

Note:The 3012cf, 6412cf, 6412cfp and 6812cf speakers are designed to be installed under factory grilles. Consequently, no grilles are packaged with these models.

Figure 2. Modifying the 4012i to be installed in locations requiring fewer than 4 mounting “ears”.

Note: Bend tab back and forth to detach it from the speaker.

Note:The 6812cf is intended to replace 5" x 7" and 6" x 8" speakers.

Loading...
+ 2 hidden pages