Infiniti TSS-1100 User Manual
TSS-1100
Owner’s Guide
(120V)
TOTAL SPEAKER SOLUTIONS
ii
TSS-1100
Read First!
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings.Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as
radiators,heat registers,stoves or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug.A polarized
plug has two blades with one wider than the other.
A grounding-type plug has two blades
and a third grounding prong.The wide blade or
the third prong are provided for your safety.If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on
or pinched,particularly at plugs,convenience
receptacles and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by
the manufacturer.
12. Use only with the cart,stand,
tripod,bracket or table specified
by the manufacturer or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
14. Refer all servicing to qualified service
personnel.Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged,liquid
has been spilled or objects have fallen into the
apparatus,the apparatus has been exposed to rain
or moisture,does not operate normally,or has
been dropped.
15. Do not use attachments not recommended by
the product manufacturer,as they may cause
hazards.
16.This product should be operated only from the
type of power source indicated on the marking
label.If you are not sure of the type of power
supply to your home,consult your product dealer
or local power company.For products intended to
operate from battery power, or other sources,
refer to the operating instructions.
17. If an outside antenna or cable system is
connected to the product,be sure the antenna or
cable system is grounded so as to provide some
protection against voltage surges and built-up
static charges. Article 810 of the National
Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of
the mast and supporting structure,grounding of
the lead-in wire to an antenna discharge unit,size
of grounding conductors,location of antennadischarge unit,connection to grounding
electrodes,and requirements for the grounding
electrode.See Figure A.
18.An outside antenna system should not be
located in the vicinity of overhead power lines or
other electric light or power circuits,or where it
can fall into such power lines or circuits.When
installing an outside antenna system,extreme care
should be taken to keep from touching such power
lines or circuits,as contact with them might be
fatal.
19. Do not overload wall outlets,extension cords,
or integral convenience receptacles,as this can
result in a risk of fire or electric shock.
20. Never push objects of any kind into this
product through openings,as they may touch
dangerous voltage points or short-out parts that
could result in a fire or electric shock.Never
spill liquid of any kind on the product.
21. Do not attempt to service this product
yourself,as opening or removing covers may
expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
22.When replacement parts are required,be sure
the service tech-nician has used replacement
parts specified by the manufacturer or that have
the same characteristics as the original part.
Unauthorized substitutions may result in fire,
electric shock or other hazards.
23. Upon completion of any service or repairs
to this product,ask the service technician to
perform safety checks to determine that the
product is in proper operating condition.
24.The product should be mounted to a wall or
ceiling only as recommended by the manufacturer.
Figure A.
Example of Antenna Grounding as per
National Electrical Code ANSI/NFPA 70
I
MPORTANTSAFETYPRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: To reduce the risk of electric shock,
do not remove cover (or back).
No user-serviceable parts inside.
Refer servicing to qualified service personnel.
CAUTION: To prevent electric shock,
do not use this (polarized) plug with
an extension cord, receptacle or other outlet
unless the blades can be fully inserted to
prevent blade exposure.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
alert the user to the presence of uninsulated
Antenna Lead-In Wire
Ground Clamp
Antenna Discharge Unit (NEC Section 810-20)
Grounding Conductors (NEC Section 810-21)
Electric Service Equipment
Ground Clamps
Power Service Grounding Electrode System
(NEC Art. 250, Part H)
iii
TSS-1100
ii Important Safety Precautions
1 Introduction
1 Planning Your System
2 Placement
2 Wall-Mounting the Satellites
3 Center and Satellite Speaker Connections
4 Subwoofer Controls
5 Subwoofer Connections
6 Operation
6 Maintenance and Service
7 Specifications
Table of Contents
TSS-1100 OWNER’S GUIDE
Infinity T o tal Solutions
™
Infinity Total Solutions continues Infinity’s longstanding commitment to
accurate sound reproduction.Our proprietary Metal Matrix Diaphragm
™
(MMD™) drivers,precision dividing networks and rigid,well-braced
enclosures combine to deliver uncompromised performance in any
stereo or multichannel home theater system.In addition,these
speakers,except for the powered subwoofer, are magnetically shielded
for safe placement adjacent to a television.
Unpacking the System
Carefully unpack the system.If you suspect damage from
transit,report it immediately to your dealer and/or delivery service.
Keep the shipping carton and packing materials for future use.Open
the package and verify the following contents:
• Warranty statement
I
NTRODUCTION
1
TSS-1100
Before deciding where to best place your speakers, survey your room and
study Figures 1 and 2.
Figure 1.In this overhead view of a typical installation,satellite speakers
are used to reproduce sound for the front and surround channels.The
center channel reproduces sound and dialogue.The powered subwoofer
provides bass for effects and music.
Figure 2.This figure shows an alternative layout,which may be more
suitable for some rooms.
P
LANNINGYOURSYSTEM
(1) Sub
(1) Center with base
(4) Satellite speakers
(4) Wall brackets for satellites
• Wire package
Contains:
2 x 40' Speaker wire
3 x 20' Speaker wire
1 x 15' Subwoofer cable
Subwoofer
Left
Surround
Channel
Left
Front
Channel
Center
Channel
Couch
Right
Front
Channel
Right
Surround
Channel
Loading...