Infiniti QX80, QX70, QX60 Hybrid, QX60, QX50 Owner's Manual

For your safety, read carefully and keep in this vehicle.

2014 Infiniti

Navigation System Owner’s Manual

INFINITI NAVIGATION SYSTEM
HELPDESK CONTACT INFORMATION

For assistance or inquiries about the
INFINITI Navigation System, or to order
updated map data, contact the INFINITI
NAVIGATION SYSTEM HELPDESK at:

. ADDRESS: P.O. Box 1588 Orem, UT

84059-992

. E-MAIL: [e-mail]

. WEB SITE: www.InfinitiNavigation.com

or www.infiniti.ca.

. PHONES: 1-800-777-0325

. HOURS: 6:00 AM to 5:00 PM (Pacific

Time)

INFINITI CONSUMER AFFAIRS DE­PARTMENT

For assistance or inquiries about the
INFINITI warranty, service or general ques­tions, contact the INFINITI Consumer Affairs
Department at:

For U.S. customers
1-800-662-6200
For Canadian customers
1-800-361-4792

FOREWORD

Thank you for purchasing an INFINITI
vehicle.

This user’s manual is for the navigation
system only. This manual contains operat­ing instructions for the INFINITI Navigation
System offered in your INFINITI vehicle.

Please read this manual carefully to ensure
safe operation of the navigation system.

. Because of possible specification

changes and optional equipment, sec­tions of this manual may not apply to
your vehicle.

. All information, specifications and il-

lustrations in this manual are those in
effect at the time of printing. INFINITI
reserves the right to change specifica­tions or design at any time without
notice.

. Do not remove this manual from the

vehicle when selling this vehicle. The
next user of this navigation system may
need the manual.

Table of Contents

1 Introduction

How to use this manual ................... 1-2

Safety information ........................... 1-2

Laser product................................... 1-3

2 Getting started

Control buttons and functions .......... 2-2

Starting system .............................. 2-8

Navigation system status screen ..... 2-9

Functions disabled while driving .... 2-10

Menu screen and

operation method .......................... 2-11

Touch panel operation ................... 2-15

How to input letters

and numbers ................................. 2-16

Map menu screen .......................... 2-18

Storing home location/address ...... 2-20

Setting destination ........................ 2-21

Operating maps ............................. 2-24

Setting voice guidance ................... 2-25

INFINITI voice recognition ............... 2-27

3 Map settings

Map types ....................................... 3-2

Displaying current vehicle location ... 3-4

Moving map..................................... 3-5

Changing scale of map .................... 3-8

Changing map view ....................... 3-11

Map view settings.......................... 3-13

Looking at information on map ...... 3-18

4 Setting destination

Destination screen ........................... 4-2

Delete destination .......................... 4-24

5 Route guidance

Procedures after

setting destination ........................... 5-2

About route guidance ...................... 5-7

Route screen.................................. 5-13

Route guidance settings................. 5-27

6 Storing location/route

Storing location ............................... 6-2

Storing route .................................. 6-5

Storing tracked route ...................... 6-6

Storing avoid area ........................... 6-7

Editing address book ...................... 6-8

Deleting stored item ...................... 6-19

Transferring information to/from

address book ................................. 6-22

7 Viewing technical information

Information screen ........................... 7-2

Infiniti Connection

so equipped) ................................... 7-3

Viewing information about current

vehicle location.............................. 7-15

Viewing available

traffic information .......................... 7-16

Viewing available

weather information ....................... 7-21

Map update ................................... 7-30

TM

(if

Viewing navigation system

unit identification .......................... 7-31

Viewing navigation system

version information ........................ 7-31

Viewing GPS current

location information ....................... 7-32

8 Other settings

Settings screen ................................ 8-2

Display settings ............................... 8-3

Navigation setting ........................... 8-5

Volume adjustment ........................ 8-11

Clock settings ................................ 8-12

Language and unit settings............ 8-13

9 Voice recognition

INFINITI Voice Recognition ................ 9-2

Standard mode ................................ 9-2

Alternate command mode ................9-9

Command lists (Standard mode) .... 9-21

Command Lists (Alternate

command mode) ............................ 9-24

10 General system information

Features of this

navigation system .......................... 10-2

Current vehicle location ................. 10-4

Route calculation ........................... 10-8

Route guidance ............................ 10-10

Notes on NavTraffic information ... 10-14
Notes on

NavWeatherXM information .......... 10-15

Map data ..................................... 10-16

How to handle display ................. 10-20

11 Troubleshooting guide

Customer assistance ...................... 11-2

Basic operations ............................ 11-3

Vehicle icon ................................... 11-4

Route calculation and

visual guidance.............................. 11-6

Voice guidance .............................. 11-8

Infiniti Connection

so equipped) ................................. 11-9

TM

(if

Voice recognition ......................... 11-10

Traffic information........................ 11-11

1 Introduction

How to use this manual....................................... 1-2

For safe operation ........................................... 1-2

Reference symbols .......................................... 1-2

Safety information............................................... 1-2

Laser product ...................................................... 1-3

1. Introduction

HOW TO USE THIS MANUAL

This manual uses special words, symbols
and icons that are organized by function.

Please refer to the following items to
understand how to use this manual prop­erly.

FOR SAFE OPERATION

WARNING!

Indicates the presence of a hazard that could
cause death or serious personal injury. To
avoid or reduce the risk, the procedures must
be followed precisely.

CAUTION!

Indicates the presence of a hazard that could
cause minor or moderate personal injury or
damage to your vehicle. To avoid or reduce
the risk, the procedures must be followed
carefully.

NOTE:

Indicates items that help you understand and
maximize the performance of your vehicle. If
ignored, they may lead to a malfunction or poor
performance.

REFERENCE SYMBOLS

INFO:

Indicates information that is necessary for
efficient use of your vehicle or accessories.

Reference page:

Indicates the title and page that you
should refer to.

<>:
Indicates a button on the control panel and

steering wheel.
[]:
Indicates a key/item displayed on the

screen.

Voice Command:

Indicates an operation by voice command.
Variable commands, such as numbers, are

indicated in

italics

in angle brackets < >.

SAFETY INFORMATION

This system is primarily designed to help
you reach your destination, and it also
performs other functions as outlined in this
manual. However, you, the driver, must use
the system safely and properly. Informa­tion concerning road conditions, traffic
signs and the availability of services may
not always be up to date. The system is not
a substitute for safe, proper and legal
driving.

Before using the navigation system, please
read the following safety information. Al­ways use the system as outlined in this
manual.

WARNING!

. To operate the navigation system or use

the INFINITI controller, first park the
vehicle in a safe location and set the
parking brake. Operating the system
while driving can distract the driver and
may result in a serious accident.

. Do not rely on route guidance alone.

Always be sure that all driving maneu­vers are legal and safe in order to avoid
accidents.

1-2

1. Introduction

. Do not disassemble or modify this

system. If you do, it may result in
accidents, fire or electrical shock.

. If you notice any foreign objects in the

system hardware, spill liquid on the
system or notice smoke or a smell
coming from it, stop using the system
immediately and contact an INFINITI
retailer. Ignoring such conditions may
lead to accidents, fire or electrical shock.

CAUTION!

. Do not use this system if you notice any

malfunctions such as a frozen screen or
the lack of sound. Continued use of the
system may result in accidents, fire or
electrical shock.

. Some states/provinces may have laws

limiting the use of video screens while
driving. Use this system only where it is
legal to do so.

. Extreme temperature conditions [below

−48F(−208C) and above 1588F (708C)]
could affect the performance of the
system.

. The glass display screen may break if it

is hit with a hard or sharp object. If the
glass screen breaks, do not touch it.
Doing so could result in an injury.

NOTE:

Do not keep the navigation system running with
the engine or the hybrid system stopped. Doing
so may discharge the vehicle battery (12V
battery). When you use the navigation system,
always keep the engine or the hybrid system
running.

LASER PRODUCT

This navigation system is certified as a
Class 1 laser product.

The navigation system complies with DHHS
Rules 21 CFR Chapter 1, Subchapter J.

WARNING!

. Do not disassemble or modify this

system. There are no user ser viceable
parts in this navigation system.

. If maintenance, adjustments and opera-

tions other than those specified in this
manual are attempted, injury due to laser
radiation and exposure could occur.

Required SiriusXM Satellite Radio and
NavTraffic monthly subscriptions are sold
separately. NavTraffic are only available in
select markets. For more information,

see www.siriusxm.com/navtraffic.

1-3

1. Introduction

Required SiriusXM Satellite Radio and
NavWeatherXM monthly subscriptions are
sold separately. NavWeatherXM is only
available in select markets. For more
information,

see www.siriusxm.com/navweather.

1-4

2 Getting started

Control buttons and functions ............................. 2-2

Control panel (Type A) ..................................... 2-2

Control panel (Type B) ..................................... 2-3

Control Panel (Type C) ..................................... 2-5

INFINITI controller ............................................ 2-6

Steering wheel switches.................................. 2-7

Starting system ................................................... 2-8

Navigation system status screen .......................... 2-9

Functions disabled while driving........................ 2-10

Touch screen operation ................................. 2-11

Menu screen and operation method .................. 2-11

Menu screens and their purposes ................. 2-11

Using controls to adjust values, levels, etc. .... 2-12

Start menu.................................................... 2-13

List screen .................................................... 2-14

Touch panel operation ....................................... 2-15

Example of touch panel operation ................. 2-15

How to input letters and numbers ..................... 2-16

Character (letters and numbers)

input screen .................................................. 2-16

Number input screen..................................... 2-17

Map menu screen ............................................. 2-18

Current location map screen ........................ 2-18

Scrolled location map screen ....................... 2-19

Storing home location/address ......................... 2-20

How to store home location......................... 2-20

Setting destination............................................ 2-21

Searching for destinations ........................... 2-21

Starting route guidance ............................... 2-22

Canceling route............................................ 2-23

Operating maps ................................................ 2-24

How to view map screen.............................. 2-24

Setting voice guidance...................................... 2-25

Turning voice guidance ON/OFF.................... 2-25

Adjusting voice guidance volume ................. 2-25

INFINITI voice recognition .................................. 2-27

Using voice recognition system.................... 2-27

Before starting............................................. 2-27

Giving voice commands ............................... 2-28

Voice command examples............................ 2-29

Command lists ............................................. 2-34

2. Getting started

CONTROL BUTTONS AND FUNCTIONS

Designs and button layout may vary
depending on the specifications and the
model.

CONTROL PANEL (Type A)

1

<DEST>

*

Push to enter a destination. Various
methods for entering a destination are
available.

“4. Setting destination”

2

<ROUTE>:

*

Push to access the guidance control
functions (guidance cancellation, route
priority, waypoint setting on the route,
etc.).

“5. Route guidance”

3

INFINITI controller:

*

Turn to highlight an item on the
screen, and push <ENTER> to select
the highlighted item.

On the map screen, turn to adjust the
map scale.

To scroll the map, push the controller
in the direction you want to scroll.

“INFINITI controller” (page 2-6)

4

<INFO>:

*

Push to display the vehicle, traffic,
weather or voice recognition informa­tion.

“7. Viewing technical informa­tion”

5

<STATUS>:

*

Push multiple times to display audio
information with either the air condi­tioner status, fuel economy or naviga­tion directions.

6

<DAY/NIGHT OFF >:

*

Push to switch between the day screen
(bright) and the night screen (dark).
Push and hold to turn off the display.
Push again to turn on the display.

2-2

7

<ZOOM IN>, <ZOOM OUT>:

*

Push to adjust the map scale.

8

<MAP>:

*

Push to display the map. While follow­ing a programmed route, push multi­ple times to change the type of route
information displayed.

9

<BACK>:

*

Push to return to the previous screen.
In a settings screen, this button is also
used to apply the setting.

In a character input screen, this button
is also used to delete the characters
that have been entered.

10

<VOICE>:

*

Push to hear the current guidance for a
programmed route.

11

<SETTING>:

*

Push to access the system settings.

“8. Other settings”

INFO:

If <BACK> needs to be pushed to apply the

.

setting on a settings screen, this manual
will explicitly include a step for this
procedure. Otherwise, pushing <BACK> re-

turns the display to the previous screen.

.

The layout of the control panel switches may
vary depending on the vehicle model and
equipment.

CONTROL PANEL (Type B)

1

<DISP> (without Around View Monitor):

*

Push to access the display settings.

<CAMERA> (with Around View Moni­tor):

Push to operate the Around View
Monitor.

2. Getting started

2

<DEST>:

*

Push to enter a destination. Various
methods for entering a destination are
available.

“4. Setting destination”

2-3

2. Getting started

3

INFINITI controller:

*

Slide or rotate to highlight an item on
the screen, and push <ENTER> to select
the highlighted item.

On the map screen, turn to adjust the
map scale.

To scroll the map, slide the controller
in the direction you want to scroll.

“INFINITI controller” (page 2-6)

4

<INFO>:

*

Push to display the vehicle, traffic,
weather or voice recognition informa­tion.

“7. Viewing technical informa­tion”

5

<SETTING>:

*

Push to access the system settings.

“8. Other settings”

6

<ROUTE>:

*

Push to access the guidance control
functions (guidance cancellation, route
priority, waypoint setting on the route,
etc.).

“5. Route guidance”

7

<MAP>:

*

Push to display the map. While follow­ing a programmed route, push multi-

2-4

ple times to change the type of route
information displayed.

8

<BACK>:

*

Push to return to the previous screen.
In a settings screen, this button is also
used to apply the setting.

In a character input screen, this button
is also used to delete the characters
that have been entered.

9

<VOICE>:

*

Push to hear the current guidance for a
programmed route.

10

<STATUS>:

*

Push multiple times to display audio
information with either the air condi­tioner status, fuel economy or naviga­tion directions.

11

<DAY/NIGHT OFF >:

*

Push to switch between the day screen
(bright) and the night screen (dark).
Push and hold to turn off the display.
Push again to turn on the display.

INFO:

If <BACK> needs to be pushed to apply the

.

setting on a settings screen, this manual
will explicitly include a step for this
procedure. Otherwise, pushing <BACK> re­turns the display to the previous screen.

.

The layout of the control panel switches may
vary depending on the vehicle model and
equipment.

CONTROL PANEL (Type C)

1

<DEST>:

*

Push to enter a destination. Various
methods for entering a destination are
available.

“4. Setting destination”

2

INFINITI controller:

*

Slide or rotate to highlight an item on
the screen, and push <ENTER> to select
the highlighted item.

On the map screen, turn to adjust the
map scale.

To scroll the map, slide the INFINITI
controller in the direction you want to
scroll.

“INFINITI controller” (page 2-6)

3

<INFO>:

*

Push to display the vehicle, traffic,
weather or voice recognition informa­tion.

“7. Viewing technical informa­tion”

2. Getting started

4

<SETTING>:

*

Push to access the system settings.

“8. Other settings”

5

<ROUTE>:

*

Push to access the guidance control
functions (guidance cancellation, route
priority, waypoint setting on the route,
etc.).

“5. Route guidance”

6

<MAP>:

*

Push to display the map. While follow­ing a programmed route, push multi­ple times to change the type of route
information displayed.

7

<BACK>:

*

Push to return to the previous screen.
In a settings screen, this button is also
used to apply the setting.

In a character input screen, this button
is also used to delete the characters
that have been entered.

8

<VOICE>:

*

Push to hear the current guidance for a
programmed route.

9

<STATUS>:

*

Push multiple times to display audio
information with either the air condi-

2-5

2. Getting started

tioner status, fuel economy or naviga­tion directions.

10

<DAY/NIGHT OFF >:

*

Push to switch between the day screen
(bright) and the night screen (dark).
Push and hold to turn off the display.
Push again to turn on the display.

INFO:

If <BACK> needs to be pushed to apply the

.

setting on a settings screen, this manual
will explicitly include a step for this
procedure. Otherwise, pushing <BACK> re­turns the display to the previous screen.

.

The layout of the control panel switches may
vary depending on the vehicle model and
equipment.

2-6

INFINITI CONTROLLER

With Directional buttons

1

<ENTER>:

*

Push to select the highlighted item on
the screen.

If this button is pushed while a map is
displayed, the map menu screen is
displayed.

2

Main directional buttons:

*

Use to move across the map, highlight
an item on the screen or adjust a
setting (volume, brightness, etc.).

3

Additional directional buttons:

*

Use to move across the map or high­light an item on the character input
screen.

4

Center dial:

*

Turn to highlight an item on the screen
or adjust a setting.

The center dial can also be used to
adjust the map scale.

Without Directional buttons

1

<ENTER>:

*

Push to select the highlighted item on
the screen.

If this button is pushed while a map is
displayed, the map menu screen is
displayed.

2

Center dial/Slide switch:

*

Center dial
Turn to highlight an item on the screen

or adjust a setting.

The center dial can also be used to
adjust the map scale.

Slide switch
Slide (push upward/downward/left-

ward/rightward) to select an item on
the screen or to adjust a setting
(volume, brightness, etc.).

The map can be scrolled in 8 directions
by sliding this switch.

STEERING WHEEL SWITCHES

Type B

2. Getting started

Type D

Type A

Type C

Type E

1

<ENTER>:

*

Tilt to highlight an item on the screen
or adjust a setting. Push to select the
highlighted item.

If this button is pushed while a map is
displayed, the map menu screen is

2-7

2. Getting started

displayed.

“Map menu screen” (page 2-18)

Push and hold while a map or status
screen is shown to display the Start
Menu.

“Start menu” (page 2-13)

If this button is tilted up while the
audio function is activated and the
map or status screen is displayed, the
audio system can be operated.

2

<− +>:

*

Use to adjust the volume. These
buttons have the same function as
that of the volume control knob. Refer
to the vehicle Owner’s Manual.

3

<BACK >:

*

Push this button during a setting
operation to return to the previous
screen. In a settings screen, this
button can also be used to apply the
setting.

4

<TALK >:

*

Push to start the voice recognition
system. If the voice recognition system
is already activated, pushing this
button cancels the voice guidance
and a voice command can be spoken

immediately.

5

<SOURCE>:

*

Use to switch the audio mode (source).
Refer to the vehicle Owner’s Manual.

6

< >:

*

Push to display the phone mode
screen.

Refer to the vehicle Owner’s Manual.

7

< >:

*

Push to change what is shown on the
vehicle information display.

Refer to the vehicle Owner’s Manual.

STARTING SYSTEM

The navigation system starts when the
ignition switch is turned to the ACC or ON
position.

NOTE:

Do not keep the navigation system on with the
engine or the hybrid system stopped. Doing so
may discharge the vehicle battery (12V bat­tery). When you use the navigation system,
always keep the engine or the hybrid system
running.

2-8

2. Getting started

NAVIGATION SYSTEM STATUS SCREEN

By pushing <STATUS> at any time, a split
screen with audio information that is
always at the top can be displayed.

Each time <STATUS> is pushed, the bottom
part of the screen changes between air
conditioner, fuel economy and navigation
directions.

INFO:

There are different status screens displayed
depending on various factors, such as the
currently active mode, whether a destination
has been set or not, etc.

When a route to the destination is set and the
audio system is on, a screen similar to the one

above appears.

1

Turning direction at the next intersec-

*

tion

2

Name of the next street

*

3

Distance to the next intersection

*

4

Distance remaining to the destination

*

5

Remaining time to the destination

*

When a route to the destination is not set
and the audio system is off, a screen
similar to the one above appears.

2-9

2. Getting started

FUNCTIONS DISABLED WHILE DRIVING

To ensure safe driving, some functions
cannot be operated or have limited opera­tion when the vehicle driving speed is
above 5 MPH (8 km/h).

The on-screen text and keys for these
restricted functions will be "grayed-out" or
muted and cannot be selected while
driving. In some cases, a screen message
will appear indicating a restricted function.

Restricted functions while driving include:

. Character (letter and number) input

screen during destination entry (street
address, phone number, freeway en­trance/exit, intersection, city center)

. Places search by name and city name

. Scrolling and viewing of certain naviga-

tion lists

. Adding/editing address book entries

. Adding/editing home location

. Storing current position, information,

destinations

These functions will become available
again when the vehicle speed is reduced
to 5 MPH (8 km/h).

Destination functions available while driv­ing include:

2-10

2. Getting started

. Home

. Address Book

. Previous Destinations

. Nearby places

. My places

. Map input

TOUCH SCREEN OPERATION

The same operations described for the
scrolling dial are possible using touch
screen operation.

MENU SCREEN AND OPERATION METHOD

MENU SCREENS AND THEIR PURPOSES

Push <DEST>, <ROUTE>, <INFO> or
<SETTING> to display the corresponding
menu screen.

How to select menu item

Example: <DEST> screen

1. Highlight the preferred menu item
using the INFINITI controller.

2. To select the highlighted menu item,

push <ENTER>. The next screen is
displayed.

3. Push <BACK> to return to the previous

screen.
Push <MAP> to return to the current

location map screen.

2-11

2. Getting started

INFO:

An item can also be selected by tilting <ENTER>
on the steering wheel up and down, and then
pushing <ENTER>.

USING CONTROLS TO ADJUST VALUES, LEVELS, ETC.

With directional buttons

2-12

2. Getting started

.

These same adjustments can also be
performed using the touch panel operation.

“Adjusting volume and others”
(page 2-15)

START MENU

The start menu can be displayed using the
switches on the steering wheel.

Without directional buttons

There are five main methods to control the
navigation system: the center dial, the
main directional buttons, the slide switch,
the touch panel and the switches on the
steering wheel. Use these controls to
adjust the volume of the phone and voice
guidance, the display brightness, etc.

How to adjust

1. Highlight the preferred setting item and

push <ENTER>. The color of the corre­sponding adjustment item changes.

2. Adjust the value or level indicating bar
using the INFINITI controller.

3. Push <ENTER> or <BACK> to apply the
setting.

INFO:

The volume of phone and voice guidance,

.

the display brightness, etc. can be adjusted
by tilting <ENTER> on the steering wheel up
and down.

1. Push and hold <ENTER> on the steering

wheel.

2. Highlight the preferred item and push

<ENTER>.

INFO:

<ENTER> on the steering wheel can be used to

display the start menu only when the map or
status screen is displayed.

2-13

2. Getting started

Available setting items

. [Destination]:

Displays the destination screen. It is
the same screen that appears when
<DEST> is pushed.

“4. Setting destination”

. [Route]:

Displays the route screen. It is the
same screen that appears when
<ROUTE> is pushed.

“5. Route guidance”

. [Info]:

Displays the information screen. It is
the same screen that appears when
<INFO> is pushed.

“7. Viewing technical information”

. [Settings]:

Displays the settings screen. It is the
same screen that appears when
<SETTING> is pushed.

“8. Other settings”

LIST SCREEN

After searching for a point of interest, a list
screen is displayed.

Depending on the list displayed, it can be
sorted.

Items displayed in list

1

Highlight the preferred item from the

*

list and push <ENTER> to select it. If a
location or facility name is not com­pletely displayed (due to length), high­light the item to display the hidden

part of the name.

2

Distance from the current location

*

3

Direction to the point of interest

*

4

If the entire list cannot be displayed on

*

the screen, the system displays the
total number of items in the list and
the entry number of the selected item.
Scroll the list using the INFINITI con­troller.

2-14

5

The list will automatically scroll to the

*

section of the list that begins with the
letter selected.

INFO:

This feature is only available when the list is
sorted by name and is not active for all lists.

6

Highlight and push <ENTER> to select

*

the other sort options.

7

When the list is sorted by the shortest

*

distance, the selected location can be
confirmed in the preview displayed on
the right side of the screen.

8

Highlight and push <ENTER> to modify

*

the search conditions.

TOUCH PANEL OPERATION

With this system, it is possible to use the
INFINITI controller and touch panel opera­tion to perform the same operations.

This manual describes the operations
using the INFINITI controller.

For the operations that differ from those of
the INFINITI controller and for useful
methods for using the touch panel opera­tion, refer to each section.

EXAMPLE OF TOUCH PANEL OPERA­TION

Examples of operations performed using
the touch panel operation are described
here.

Selecting item

2. Getting started

Adjusting volume and others

Touch [+] or [−] located on the right and left
of the bar graph to perform the adjust­ment.

Scrolling a list or message

Touch [ ]or[ ] to scroll the list or
message.

Touch [

]or[ ] to skip to the next page.

When the item is touched, the next screen
is displayed.

2-15

2. Getting started

Inputting letters and numbers

1. Touch the letter or number.

2. Touch [Delete] to delete a character.
Push and hold [Delete] to delete all of
the characters.

HOW TO INPUT LETTERS AND NUMBERS

CHARACTER (letters and numbers)
INPUT SCREEN

Alphanumeric characters are entered to set
a destination, search for a facility, edit
stored locations, etc.

1. Use the INFINITI controller to highlight a
character on the displayed keyboard.

2. Push <ENTER>. The highlighted charac­ter is entered.

INFO:

Inputting letters can also be done with the
touch panel operation.

3. Push <BACK>, or highlight [Delete] and
push <ENTER> to delete the last char­acter entered.

Push and hold <BACK> to delete all the
characters entered.

Highlight [Space] and push <ENTER> to
enter a space.

2-16

2. Getting started

4. After finishing the entry, highlight [List]

and push <ENTER>.

INFO:

Push <BACK> on the control panel to return

.

to the previous screen, but only after
deleting all the characters entered.

.

Touch [BACK] on the screen to return to the
previous screen even when characters have
been entered.

.

The list screen appears automatically when
text has been entered and the matching list
items have been narrowed down to a
number that will fit on the screen.

Symbol input screen

.

Symbol keys are displayed by highlighting
[Symbols] and pushing <ENTER>. Alphabet
keys are displayed by highlighting [A-Z] and
pushing <ENTER>.

NUMBER INPUT SCREEN

A phone number or a street number can
also be entered as a search method to look
for a destination. Perform the following
procedure to enter a number.

INFO:

Only the locations included in the map data
database can be searched for by a phone
number.

1. Use the INFINITI controller to highlight a
number on the displayed keyboard.

2. Push <ENTER>. The highlighted number

is entered.

INFO:

Inputting numbers can also be done with
the touch panel operation.

3. Push <BACK>, or highlight [Delete] and
push <ENTER> to delete the last number
entered.

Push and hold <BACK> to delete all the
numbers entered.

2-17

2. Getting started

4. After finishing the entry, highlight [List]

and push <ENTER>.

INFO:

Push <BACK> on the control panel to return

.

to the previous screen, but only after
deleting all the numbers entered.

.

Touch [BACK] on the screen to return to the
previous screen even when numbers have
been entered.

MAP MENU SCREEN

Push <ENTER> while the current location
map screen or a scrolled map screen is
displayed to display the menu correspond­ing to that screen.

This menu can be used to access helpful
functions quickly, such as setting a desti­nation and searching for points of interest
nearby.

There are various methods used to select a
menu item. Use a method described earlier
in this manual.

“Menu screen and operation method”
(page 2-11)

INFO:

With the touch panel operation, the same
screen can be displayed by touching [Map
Menu] located on the map screen.

CURRENT LOCATION MAP SCREEN

If <ENTER> is pushed while the current
location map screen is displayed, the
following options are available.

. [Store Location]:

Stores the current vehicle location in
the Address Book. The stored location
can be retrieved as necessary to set it
as a destination (waypoint).

“Storing location” (page 6-2)

. [Nearby Places]:

Searches for points of interest near the
current vehicle location, such as res­taurants and gas stations, etc.

“Finding nearby place” (page 4-6)

. [Map View]:

Performs map operations such as the
switching of map type and the setting
of map orientation and scale.

2-18

2. Getting started

“3. Map settings”

. [Map Icons]:

Displays map icons of certain points of
interest (such as restaurants and gas
stations, etc.) on the map around the
current vehicle location.

“Displaying map icons”
(page 3-18)

. [Store Tracking]:

Stores in the Address Book the route
travelled from the starting point to the
current location.

“Storing tracked route” (page 6-6)

SCROLLED LOCATION MAP SCREEN

If <ENTER> is pushed while a scrolled map
screen is displayed, the following options
are available.

. [New Dest.]:

Sets the destination to the map loca­tion where <ENTER> was pushed. If a
destination is already set, the location
will be set as the new destination.

“Setting point on map”
(page 4-23)

. [Add to Route]:

Sets the map location where <ENTER>
was pushed as the destination or a
waypoint. This is available only when a
suggested route is already set.

“Setting destination or waypoint”
(page 5-15)

. [Nearby Places]:

Searches for points of interest near the
map location where <ENTER> was
pushed and sets them as a destination
or waypoint.

Use the same search method as the
one for [Places].

“Finding nearby place” (page 4-6)

. [Store Location]:

Store the map location where <ENTER>
was pushed in the Address Book. The
stored location can be retrieved to set it
as a destination or waypoint.

“Storing location” (page 6-2)

. [Delete]:

Deletes a stored location. Available
only when the cross pointer is placed
over a stored location icon.

. [Incident Detail]:

This function can be selected only when
the traffic information icon is dis­played. Displays the details of the
traffic information icon. Place the cross
pointer over the icon to be checked.

INFO:

Incident details are a feature of Traffic Informa­tion, and a NavTraffic subscription is required in
order to receive Traffic Information.

2-19

2. Getting started

STORING HOME LOCATION/ADDRESS

HOW TO STORE HOME LOCATION

If a home location is already stored in the
Address Book, it can be easily retrieved to
set the route to the stored home location.

The procedure to store the home location is
the same as for storing any other location.

“4. Setting destination”

As an example, the procedure for storing
the home location by searching for a
destination by address is described here.

1. Push <DEST>.

2. Highlight [Home (Add New)] and push

<ENTER>.

3. A confirmation message is displayed.
Confirm the message, highlight [Yes]
and push <ENTER>.

4. Highlight [Street Address] and push
<ENTER>. A character input screen is
displayed.

5. Enter the address of the home location,

highlight [OK] and push <ENTER>.

“Finding address” (page 4-4)

The map screen is displayed.

6. Adjust the location of your home using
the INFINITI controller, if necessary.

7. After adjusting the location, push
<ENTER>.

2-20

2. Getting started

INFO:

It is recommended to move the home
location for security reasons.

8. A message is displayed and the home
location is stored.

9. Highlight [OK] and push <ENTER>.

10.Push <MAP> to return to the current
location map screen. The home icon is
displayed on the map.

INFO:

The same setting can also be performed by
pushing <SETTING> and highlighting [Naviga­tion].

“Storing location by searching” (page 6-2)

SETTING DESTINATION

SEARCHING FOR DESTINATIONS

As an example, the method for setting a
nearby restaurant as the destination using
[Places] is described here.

1. Push <DEST>.

2. Highlight [Places] and push <ENTER>.

3. Highlight [Nearby RESTAURANT] and

push <ENTER>.

2-21

2. Getting started

INFO:

The search can also be narrowed down by
selecting [All Categories or Name] or [ZAGAT]
on this screen. By selecting [All Categories
or Name], the area, name of facility, etc. can
be specified. By selecting [ZAGAT], restau­rants registered in the ZAGAT database can
be searched and sorted by their rating
regarding food, decor, cost, service, etc.
The Zagat Content displayed may not reflect
the most up-to-date Zagat Content available
to the public.

4. Highlight the preferred restaurant from

the list and push <ENTER>.

INFO:

. The position of the selected location is

displayed in the preview on the right
side of the screen.

. If there is a route already in progress,

only places along the current route will
be listed. Turn off [Show Along Route] at
the top of list to display all nearby
places.

5. The entire route is shown on the map.
Highlight [Start] after confirming the
location of the displayed destination,
and push <ENTER>.

The system sets the destination to the
selected location and starts calculating
a route.

INFO:

Even after setting a destination, the location
of the destination can be adjusted and the
route can be stored, etc., if necessary.

“Procedures after setting destination”
(page 5-2)

STARTING ROUTE GUIDANCE

After the destination is set and route
calculation is performed, the suggested
route is displayed.

1. Highlight [Start] and push <ENTER>.

2. Once route guidance is started, the
system navigates you through the
guide points using visual and voice
guidance.

2-22