Microcontroller
XMC1100 CPU Card
For XMC1000 Family
Board User's Manual
Revision 2.0, 2013-12-18
CPU-11A-V1
XMC1100 CPU Card
Edition 2013-12-18
Published by
Infineon Technologies AG
81726 Munich, Germany
© 2013 Infineon Technologies AG
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of conditions or
characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any
information regarding the application of the device, Infineon Technologies hereby disclaims any and all
warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual
property rights of any third party.
Information
For further information on technology, delivery terms and conditions and prices, please contact the nearest
Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements, components may contain dangerous substances. For information on the types in
question, please contact the nearest Infineon Technologies Office.
Infineon Technologies components may be used in life-support devices or systems only with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the
failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life
support devices or systems are intended to be implanted in the human body or to support and/or maintain and
sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other
persons may be endangered.
CPU-11A-V1
XMC1100 CPU Card
Template: IFX_Template_2011-11-11.dot
Revision History
Page or Item
Subjects (major changes since previous revision)
Revision 2.0, 2013-12-18
16,18
Change C210 to 4.7uF
Trademarks of Infineon Technologies AG
AURIX™, C166™, CanPAK™, CIPOS™, CIPURSE™, EconoPACK™, CoolMOS™, CoolSET™,
CORECONTROL™, CROSSAVE™, DAVE™, DI-POL™, EasyPIM™, EconoBRIDGE™, EconoDUAL™,
EconoPIM™, EconoPACK™, EiceDRIVER™, eupec™, FCOS™, HITFET™, HybridPACK™, I²RF™,
ISOFACE™, IsoPACK™, MIPAQ™, ModSTACK™, my-d™, NovalithIC™, OptiMOS™, ORIGA™,
POWERCODE™, PRIMARION™, PrimePACK™, PrimeSTACK™, PRO-SIL™, PROFET™, RASIC™,
ReverSave™, SatRIC™, SIEGET™, SINDRION™, SIPMOS™, SmartLEWIS™, SOLID FLASH™,
TEMPFET™, thinQ!™, TRENCHSTOP™, TriCore™.
Other Trademarks
Advance Design System™ (ADS) of Agilent Technologies, AMBA™, ARM™, MULTI-ICE™, KEIL™,
PRIMECELL™, REALVIEW™, THUMB™, µVision™ of ARM Limited, UK. AUTOSAR™ is licensed by
AUTOSAR development partnership. Bluetooth™ of Bluetooth SIG Inc. CAT-iq™ of DECT Forum.
COLOSSUS™, FirstGPS™ of Trimble Navigation Ltd. EMV™ of EMVCo, LLC (Visa Holdings Inc.). EPCOS™
of Epcos AG. FLEXGO™ of Microsoft Corporation. FlexRay™ is licensed by FlexRay Consortium.
HYPERTERMINAL™ of Hilgraeve Incorporated. IEC™ of Commission Electrotechnique Internationale. IrDA™
of Infrared Data Association Corporation. ISO™ of INTERNATIONAL ORGANIZATION FOR
STANDARDIZATION. MATLAB™ of MathWorks, Inc. MAXIM™ of Maxim Integrated Products, Inc.
MICROTEC™, NUCLEUS™ of Mentor Graphics Corporation. MIPI™ of MIPI Alliance, Inc. MIPS™ of MIPS
Technologies, Inc., USA. muRata™ of MURATA MANUFACTURING CO., MICROWAVE OFFICE™ (MWO) of
Applied Wave Research Inc., OmniVision™ of OmniVision Technologies, Inc. Openwave™ Openwave Systems
Inc. RED HAT™ Red Hat, Inc. RFMD™ RF Micro Devices, Inc. SIRIUS™ of Sirius Satellite Radio Inc.
SOLARIS™ of Sun Microsystems, Inc. SPANSION™ of Spansion LLC Ltd. Symbian™ of Symbian Software
Limited. TAIYO YUDEN™ of Taiyo Yuden Co. TEAKLITE™ of CEVA, Inc. TEKTRONIX™ of Tektronix Inc.
TOKO™ of TOKO KABUSHIKI KAISHA TA. UNIX™ of X/Open Company Limited. VERILOG™, PALLADIUM™
of Cadence Design Systems, Inc. VLYNQ™ of Texas Instruments Incorporated. VXWORKS™, WIND RIVER™
of WIND RIVER SYSTEMS, INC. ZETEX™ of Diodes Zetex Limited.
Last Trademarks Update 2011-11-11
CPU-11A-V1
XMC1100 CPU Card
Board User's Manual 4 Revision 2.0, 2013-12-18
Table of Contents
1 Overview ........................................................................................................................................ 7
1.1 Key Features .................................................................................................................................. 7
1.2 Block Diagram................................................................................................................................. 7
2 Hardware Description ................................................................................................................... 8
2.1 XMC1100 connector for ARDUINOTM ................................ .............................................................. 8
2.1.1 Digital IO connector ......................................................................................................................... 8
2.1.2 Analog input .................................................................................................................................. 10
2.1.3 Power connector, POWER ............................................................................................................ 10
2.1.4 ICSP (In-Circuit Serial Programming) Header ................................................................................ 11
2.2 LEDs ............................................................................................................................................. 11
2.3 Other connectors .......................................................................................................................... 12
3 Production Data .......................................................................................................................... 14
3.1 Schematics ................................................................................................................................... 14
3.2 Layout and Geometry .................................................................................................................... 17
3.3 Bill of Material ............................................................................................................................... 17
CPU-11A-V1
XMC1100 CPU Card
Board User's Manual 5 Revision 2.0, 2013-12-18
List of Figures
Figure 1 Block Diagram of XMC1100 CPU Card for ArduinoTM ...................................................................... 7
Figure 2 XMC1100 CPU Card for ArduinoTM .................................................................................................. 8
Figure 3 Digital IO connectors IOH, IOL ........................................................................................................ 9
Figure 4 Analog input AD connector ............................................................................................................ 10
Figure 5 POWER connector ........................................................................................................................ 11
Figure 6 ICSP connector ............................................................................................................................. 11
Figure 7 LEDs Circuit .................................................................................................................................. 12
Figure 8 AD_AUX and AUX connector ........................................................................................................ 12
Figure 9 Schematic 1 of 2 XMC1100 CPU Card for ArduinoTM ..................................................................... 15
Figure 10 Schematic 2 of 2 XMC1100 CPU Card for ArduinoTM ..................................................................... 16
Figure 11 XMC1100 CPU Card for ArduinoTM layout and geometry ................................ ............................... 17
CPU-11A-V1
XMC1100 CPU Card
Board User's Manual 6 Revision 2.0, 2013-12-18
List of Tables
Table 1 Digital IO of connector IOH .............................................................................................................. 9
Table 2 Digital IO of connector IOL .............................................................................................................. 9
Table 3 Pinout of the AD connector ............................................................................................................ 10
Table 4 Pinout of the POWER connector ................................ ................................................................ ... 11
Table 5 Signals of ICSP connector ............................................................................................................. 11
Table 6 LEDs Signal Description ................................................................................................................ 12
Table 7 Signals of connector AD_AUX ....................................................................................................... 13
Table 8 Signals of connector AUX.............................................................................................................. 13
Table 9 XMC1100 CPU Card for ArduinoTM ................................................................................................ 17
CPU-11A-V1
XMC1100 CPU Card
Board User's Manual 7 Revision 2.0, 2013-12-18
Introduction
This document describes the features and hardware details of the XMC1100 CPU Card for ArduinoTM. This
board is mounted with ARM® CortexTM-M0 based XMC1100 Microcontroller from Infineon Technologies AG and
part of Infineon’s XMC1000 offering of Kits.
1 Overview
The XMC1100 CPU Card for ArduinoTM has two rows of pin headers which fully compatible with ArduinoTM
shield. Hence, user can buy various Arduino shield boards off-the-shelf to test the capabilities of XMC1100
Microcontroller.
1.1 Key Features
The XMC1100 CPU Card for ArduinoTM is equipped with the following features
XMC1100 (ARM
®
Cortex
TM
-M0 based) Microcontroller, TSSOP38
Headers compatible with ArduinoTM shield
Detachable SEGGER J-Link debugger and UART virtual COM port, with micro USB connector
Power supply concept compatible with ArduinoTM Uno
One LED as required from ArduinoTM board specification and six additonal LEDs
1.2 Block Diagram
Figure 1 shows the block diagram of the XMC1100 CPU Card for ArduinoTM. There are following blocks:
Figure 1 Block Diagram of XMC1100 CPU Card for ArduinoTM
CPU-11A-V1
XMC1100 CPU Card
Board User's Manual 8 Revision 2.0, 2013-12-18
2 Hardware Description
The following sections give a detailed description of the hardware and how it can be used.
Figure 2 XMC1100 CPU Card for ArduinoTM
2.1 XMC1100 connector for ARDUINOTM
2.1.1 Digital IO connector
XMC1100 CPU Card for ArduinoTM have 10 pin connector mounting holes and 8 pin connector mounting holes
at IOH and IOL respectively. Sixteen of those pins are digital input or output pins. The pinouts are listed in Table
1 and Table 2.
CPU-11A-V1
XMC1100 CPU Card
Board User's Manual 9 Revision 2.0, 2013-12-18
Figure 3 Digital IO connectors IOH, IOL
Table 1 Digital IO of connector IOH
Pin No.
ArduinoTM Signal Name
XMC1100 Signal Name
Description
10
SCL
P2.0
I2C Clock
9
SDA
P2.1
I2C Data / Address
8
AREF
P2.3
Analog reference voltage
7
GND
GND
Ground
6
13 - SCK
P0.7
SPI-SCK / LED output
5
12 - MISO
P1.0
SPI-MISO
4
~11 - MOSI
P1.1
SPI-MOSI / PWM output
3
~10 - SS
P0.9
SPI-SS / PWM output
2
~9 -
P0.8
PWM output
1 8 P0.12
GPIO
Table 2 Digital IO of connector IOL
Pin No.
ArduinoTM Signal Name
XMC1100 Signal Name
Description
8 7 P0.4
GPIO
7
~6
P0.3
PWM output
6
~5
P0.2
PWM output
5 4 P0.1
GPIO
4
~3
P0.0
External interrupt / PWM output
3 2 P1.4
External interrupt
2
1 - TX(IN)
P1.3
Device received UART signal
1
0 - RX(OUT)
P1.2
Device transmit UART signal
CPU-11A-V1
XMC1100 CPU Card
Board User's Manual 10 Revision 2.0, 2013-12-18
2.1.2 Analog input
XMC1100 CPU Card for ArduinoTM has six analog inputs at connector AD.
Figure 4 Analog input AD connector
Table 3 Pinout of the AD connector
Pin No.
ArduinoTM Signal Name
XMC1100 Signal Name
Description
1
A0
P2.6
ADC Input
2
A1
P2.8
ADC Input
3
A2
P2.9
ADC Input
4
A3
P2.10
ADC Input
5
A4
P2.11
ADC Input
6
A5
P2.2
ADC Input
2.1.3 Power connector, POWER
XMC1100 CPU Card for ArduinoTM can be powered from the micro USB connector or with an external power
supply via the DC power jack. However, the DC power jack is not mounted.
The XMC1100 device can operate by power supply of 1.8V till 5.5Vdc. On this board, 5Vdc is used to power the
XMC1100 device. However, if user wants to power the XMC1100 device with 3.3Vdc, then, please remove
R102 and solder 0 ohm resistor R101.
CPU-11A-V1
XMC1100 CPU Card
Board User's Manual 11 Revision 2.0, 2013-12-18
Figure 5 POWER connector
Table 4 Pinout of the POWER connector
Pin No.
ArduinoTM Signal Name
XMC1100 Signal Name
Description
1 - - - 2
IOREF
VDDP
VDDP connect to 5V via R102
3
AREF
P2.4
ADC input to sense Analog reference voltage
4
3.3V
+3V3
3.3V is generated by a 3.3V regulator IC101
from +5V
5
5V
+5V
+5V is generated by the 5V regulator IC102
from VIN input. If VIN is not powered, +5V is
supply by micro-USB connector.
6
GND
GND
Ground
7
GND
GND
Ground
8
VIN
VIN
DC jack (not mounted), 7-12V
2.1.4 ICSP (In-Circuit Serial Programming) Header
The SPI connector (not mounted) is used to program the XMC1100 microcontroller via the SPI interface.
Figure 6 ICSP connector
Table 5 Signals of ICSP connector
Pin No.
ArduinoTM Signal Name
XMC1100 Signal Name
Description
1
MISO
P1.0
Data transmit
2
+5V
VDDP
5Vdc
3
SCK
P0.7
Clock input
4
MOSI
P1.1
Data received
5
SS
P2.4
Chip select
6
GND
GND
ground
2.2 LEDs
ArdurinoTM pinout signal ‘13-SCK’ is connected to yellow LED102 via a buffer. Furthermore, six surface mount
LEDs are available for user signaling. Table 6 shows the LEDs driving signals.
CPU-11A-V1
XMC1100 CPU Card
Board User's Manual 12 Revision 2.0, 2013-12-18
Figure 7 LEDs Circuit
Table 6 LEDs Signal Description
LED Designation
Signal Name
Description
LED102
P0.7
Output ‘High’ to on LED
LED103
P0.5
Output ‘Low’ to on LED
LED104
P0.6
Output ‘Low’ to on LED
LED105
P1.2
Output ‘Low’ to on LED
LED106
P1.3
Output ‘Low’ to on LED
LED107
P1.4
Output ‘Low’ to on LED
LED108
P1.5
Output ‘Low’ to on LED
2.3 Other connectors
XMC1100 microcontroller has more pins than is required ArduinoTM board’s pinouts, those extra pins are group
into connector AD_AUX (not mount) and AUX (not mount).
Figure 8 AD_AUX and AUX connector
CPU-11A-V1
XMC1100 CPU Card
Board User's Manual 13 Revision 2.0, 2013-12-18
Table 7 Signals of connector AD_AUX
Pin No.
Signal Name
Description
1
P2.7
ADC input
2
P2.5
ADC input
3
GND
ADC input
Table 8 Signals of connector AUX
Pin No.
Signal Name
Description
1
P0.5
GPIO
2
P0.6
GPIO
3
P0.10
GPIO
4
P0.11
GPIO
5
P0.13
GPIO
CPU-11A-V1
XMC1100 CPU Card
Board User's Manual 14 Revision 2.0, 2013-12-18
3 Production Data
3.1 Schematics
This chapter contains the schematics for the XMC1100 CPU Card for ArduinoTM:
Figure 9: CPU, Pin Headers, LED, Power Supply
Figure 10: On-board Debugger, Power
CPU-11A-V1
XMC1100 CPU Card
Board User's Manual 15 Revision 2.0, 2013-12-18
Figure 9 Schematic 1 of 2 XMC1100 CPU Card for ArduinoTM
CPU-11A-V1
XMC1100 CPU Card
Board User's Manual 16 Revision 2.0, 2013-12-18
Figure 10 Schematic 2 of 2 XMC1100 CPU Card for ArduinoTM
CPU-11A-V1
XMC1100 CPU Card
Board User's Manual 17 Revision 2.0, 2013-12-18
3.2 Layout and Geometry
Figure 11 XMC1100 CPU Card for ArduinoTM layout and geometry
3.3 Bill of Material
Table 9 XMC1100 CPU Card for ArduinoTM
No.
Qty
Value
Device
Reference
Designator
1
1
100uF/16V/10%/SMC_D
Capacitor
C101
2
1
100n/16/10%/0603
Capacitor
C102
3
1
22u/10V/10%/1206
Capacitor
C103
4
1
10u/10V/10%/1206
Capacitor
C104
5
1
100n10V/10%/0603
Capacitor
C105
6
1
100n/10V/10%/0402
Capacitor
C106
7
1
100n/10V/10%/0603
Capacitor
C107
8
1
220nF/10V/10%/0603
Capacitor
C108
9
1
100nF/10V/10%/0603
Capacitor
C109
10
1
220nF/10V/10%/0603
Capacitor
C110
11
1
22uF/10V/10%/0805
Capacitor
C201
12
1
10uF/10V/10%/0805
Capacitor
C202
13
1
100nF/10V/10%/0603
Capacitor
C203
14
1
100nF/10V/10%/0402
Capacitor
C204
15
1
15pF/10V/10%/0402
Capacitor
C205
16
1
15pF/10V/10%/0402
Capacitor
C206
17
1
100nF/10V/10%/0402
Capacitor
C207
18
1
100nF/10V/10%/0402
Capacitor
C208
CPU-11A-V1
XMC1100 CPU Card
Board User's Manual 18 Revision 2.0, 2013-12-18
No.
Qty
Value
Device
Reference
Designator
19
1
100nF/10V/10%/0402
Capacitor
C209
20
1
4.7uF/10V/10%/0805
Capacitor
C210
21
1
100nF/10V/10%/0402
Capacitor
C211
22
1
100nF/10V/10%/0402
Capacitor
C212
23
1
100nF/10V/10%/0402
Capacitor
C213
24
1
100nF/10V/10%/0402
Capacitor
C215
25
1
SS13B (Multicomp)
Diode
L101
26
1
LMV358MM
Op-Amp
IC103
27
1
SN74LVC2T45DCT
Resistor
IC202
28
1
SN74LVC1T45DCK
Resistor
IC203
29
1
SN74LVC1T45DCK
Resistor
IC204
30
1
SN74LVC2T45DCT
Resistor
IC205
31
1
SN74LVC1T45DCK
Resistor
IC206
32
1
BLM18PG600
Ferrite Bead
L201
33
1
Green LED/0603
ChipLED
LED101
34
1
Yellow LED/0603
ChipLED
LED102
35
1
LED-RED/D/0603
Red ChipLED
LED103
36
1
LED-RED/D/0603
R Red ChipLED
LED104
37
1
LED-RED/D/0603
Red ChipLED
LED105
38
1
LED-RED/D/0603
Red ChipLED
LED106
39
1
LED-RED/D/0603
Red ChipLED
LED107
40
1
LED-RED/D/0603
Red ChipLED
LED108
41
1
12MHZ/S/3.2X2.5
Quarz
Q201
42
1
0R/0603
Resistor
R102
43
1
1k/0603
Resistor
R103
44
1
10k/0402
Resistor
R104
45
1
10k0402
Resistor
R105
46
1
0R/0603
Resistor
R106
47
1
0R/0603
Resistor
R107
48
1
0R/0603
Resistor
R108
49
1
1k/0603
Resistor
R109
50
1
4K7/0603
Resistor
R110
51
1
4K7/0603
Resistor
R111
52
1
4K7/0603
Resistor
R112
53
1
4K7/0603
Resistor
R113
54
1
4K7/0603
Resistor
R114
55
1
4K7/0603
Resistor
R115
56
1
680R/0603
Resistor
R201
57
1
680R/0603
Resistor
R202
58
1
33R/0402
Resistor
R204
59
1
510R/0603
Resistor
R205
60
1
33R/0402
Resistor
R206
61
1
4k7/0402
Resistor
R207
CPU-11A-V1
XMC1100 CPU Card
Board User's Manual 19 Revision 2.0, 2013-12-18
No.
Qty
Value
Device
Reference
Designator
62
1
10k/0402
Resistor
R208
63
1
1M/0402
Resistor
R209
64
1
5K10/1%/0603
Resistor
R210
65
1
10k/0402
Resistor
R211
66
1
5K10/1%/0603
Resistor
R212
67
1
10k/0402
Resistor
R214
68
1
10k/0402
Resistor
R215
69
1
10k/0402
Resistor
R216
70
1
10k/0402
Resistor
R217
71
1
LED-GN/D/0603
ChipLED
V201
72
1
LED-R/D/0603
ChipLED
V202
73
1
ESD8V0L2B-03L
ChipLED
V204
74
1
ZX62-AB-5PA
Micro-USB
X202
75
1
IFX25001MEV33
3V3 regulator,
Infineon
IC101
76
1
IFX25001TFV50
5V regulator, Infineon
IC102
77
1
XMC1000-T038
Microcontroller,
Infineon
IC104
78
1
IFX25001MEV33
3V3 regulator,
Infineon
IC201
79
1
XMC4200_QFN48
Microcontroller,
Infineon
U201
80
1
BAT60A
Diode
V203
81
1
BSL307SP
P Mosfet
Q101
82
1
n.m.
1x6 pin header
AD
83
1
n.m.
1x3 pin header
AD_AUX
84
1
n.m.
1x5 pin header
AUX
85
1
BRIDGE10X10
BRIDGE10
BR101
86
1
BRIDGE10X10
BRIDGE10
BR102
87
1
BRIDGE10X10
BRIDGE10
BR201
88
1
BRIDGE10X10
BRIDGE10
BR202
89
1
n.m.
1x10 pin header
IOH
90
1
n.m.
1x8 pin header
IOL
91
1
n.m
1x5 pin header
JP202
92
1
POWER
1x8 pin header
POWER
93
1
ICSP
2x3 pin header
SPI
94
1
DC21MMX
DC Power Jack
X101
95
1
MA04-2 Debug
2x4 pin header
X102
96
1
MA04-2 DEBUG
2x4 pin header
X201
97
1
RESET
1x1 pin header
X203
98
1
no ass./10nF/0402
Capacitor
C214
99
1
n.m.
Resistor
R101
100
1
n.m./0603
Resistor
R213
w w w . i n f i n e o n . c o m
Published by Infineon Technologies AG
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Infineon:
KIT_XMC11_BOOT_001
Loading...