The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits,
descriptions and charts stated herein.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon
Technologies Office (www.infineon.com).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in question
please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of
Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support
device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended
to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is
reasonable to assume that the health of the user or other persons may be endangered.
P
Uni- and Bipolar Hall IC Switches for
Magnetic Field Applications
TLE4905L, TLE4935L,
TLE4945L, TLE4945-2L
Features
• Digital output signal
• For unipolar and alternating magnetic fields
• Large temperature range
• Temperature compensated magnetic performance
• Protection against reversed polarity
• Output protection against electrical disturbances
PG-SSO-3-2
-SSO-3-2
TypeMarkingPackage
TLE4905L05 LPG-SSO-3-2
TLE4935L35 LPG-SSO-3-2
TLE4935-2L35 2PG-SSO-3-2
TLE4945L45 LPG-SSO-3-2
TLE4945-2L45 2PG-SSO-3-2
TLE4905/35/45/45-2 L (Unipolar/Bipolar Magnetic Field Switches) have been designed
specifically for automotive and industrial applications. Reverse polarity protection is included onchip as is output protection against negative voltage transients.
Typical applications are position/proximity indicators, brushless DC motor commutation,
rotational indexing etc.
Data Sheet12007-05
AEP01364
1.35
Center of
a
Pin Configuration
(view on branded side of component)
TLE4905L, TLE4935L, TLE4945L, TLE4945-2L
±0.1
Figure 1
Pin Definitions and Functions
Pin No.SymbolFunction
1V
S
Supply voltage
2GNDGround
3
Q
Output
2.08
V
231
GND
sensitive are
Q
±0.1
S
Data Sheet2V1.5, 2007-11
TLE4905L, TLE4935L, TLE4945L, TLE4945-2L
Circuit Description
The circuit includes Hall generator, amplifier and Schmitt-Trigger on one chip. The internal
reference provides the supply voltage for the components. A magnetic field perpendicular to the
chip surface induces a voltage at the hall probe. This voltage is amplified and switches a Schmitttrigger with open-collector output. A protection diode against reverse power supply is integrated.
The output is protected against electrical disturbances.
Threshold
Generator
1
V
S
V
S
V
Ref
Hall-
Generator
3
Q
Amplifier
2
GND
Schmitt-
Trigger
Output
Stage
AEB01243
Figure 2Block Diagram
Data Sheet3V1.5, 2007-11
TLE4905L, TLE4935L, TLE4945L, TLE4945-2L
Functional Description Unipolar Type TLE4905 (Figure 3 and 4)
When a positive magnetic field is applied in the indicated direction (Figure 3) and the turn-on
magnetic induction B
When the current is reduced, the output of the IC turns off (Release Point; Figure
Figure 3Sensor/Magnetic-Field Configuration
is exceeded, the output of the Hall-effect IC will conduct (Operate Point).
OP
+
Branded Side
Ι
S
V
N
+
V
S
B
Q
-
AES01231
4).
B
OP
t
t
AED01420
Induction
Output Voltage
B
RP
0
V
Q
V
QH
V
QL
Figure 4Switching Characteristics Unipolar Type
Data Sheet4V1.5, 2007-11
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.