infaco Powercoup PW2 SC160 Assembly Instructions Manual

Assembly instructions SC160

SAFETY INSTRUCTIONS ______________________________________________ 5

PERSONAL PROTECTIVE EQUIPMENT __________________________________ 5

ENVIRONMENTAL PROTECTION ______________________________________ 5

GENERAL OVERVIEW ________________________________________________ 6

CHARACTERISTICS __________________________________________________ 6

VIEWS OF ACCESSORIES _____________________________________________ 6

USER’S MANUAL ____________________________________________________ 7

INSTALLATION AND POWER CONNECTION ___________________________________________ 7

USING THE MACHINE _______________________________________________________ 7-8

USING WITH EXTENSION POLE _________________________________________________________ 9

CLEARANCE ADJUSTMENT _________________________________________________________ 10

WEEKLY GREASING ________________________________________________________________ 10

SAFETY PRECAUTIONS ______________________________________________________________ 11

CARE AND MAINTENANCE __________________________________________ 12

CARE – CHANGING THE BLADE ___________________________________________________ 13-14

CARE - BLADE ADJUSTMENT _________________________________________________________ 15

CARE – CLEANING AND GREASING ____________________________________________________ 16

SAFETY INSTRUCTIONS ____________________________________________ 17

WARRANTY CONDITIONS __________________________________________17

RECOMMANDATIONS ______________________________________________ 18

TROUBLESHOOTING ________________________________________________ 19

WARRANTY CARD _________________________________________________20

EQUIPMENT MANUFACTURED IN FRANCE ____________________________25

DECLARATION OF CONFORMITY (CE) ________________________________ 26

Contents

3

Reference Description

PW2 Universal handle for the POWERCOUP PW2 range.

THD600 Double hedge trimmer, length of the cutting bar 600 mm (23,5’’).

THD700 Double hedge trimmer, length of the cutting bar 700 mm (27,5’’).

THS700 Single hedge trimmer, length of the cutting bar 700 mm (27,5’’).

TR8 Reciprocating saw, max cutting capacity max. Ø150 (5,9’’).

SC160 Reciprocating saw, max cutting capacity Ø100 (3’’).

PW930 Carbon extension pole, length 930 mm (3 ft ).

PW1830 Carbon extension pole, length 1830 mm (6 ft ).

PWT1650 Carbon extension pole, length 1650 mm (5,4 ft ).

EC1700 Flower Thinner, telescopic pole 1,5m à 1,9m (59’’ to 74,5’’).

EP1700 Desuckering tool, telescopic pole 1,2m à 1,6m (47’’ to 63’’).

OT2650 Olive harvester, telescopic pole 2,2 à 2,8m (86,5’’ to 110’’).

OF1830 Olive harvester, ﬁxed pole 2,5m (98,5‘‘).

OF1530

Olive harvester, ﬁxed pole 2,2m (86,5‘‘).

4

Keep all safety warnings and instructions so that you can refer to them at a later date.

The term “tool” in the warnings refers to your electrical tool run off the main supply (with supply power cord) or your electrical battery-operated tool (without a supply power cord).

WARNING. Read all safety warnings and all instructions. Failure to abide by warnings and instructions could lead to an electric shock, ﬁre and/or serious injury.

PERSONAL PROTECTIVE EQUIPMENT

ENVIRONMENTAL PROTECTION

Follow the speciﬁc instructions for waste elimination in your country. Electrical appliances should not be thrown in the garbage.

The device, accessories and packaging should be recycled. Ask your specialist INFACO retailer for the latest information on

eco-compatible waste elimination.

SAFETY SAFETY INSTRUCTIONS

Read the user manual carefully, especially the safety instructions.

You MUST wear a helmet, eye protection and hearing protection.

Hand protection, for work gloves.

Foot protection by closed toed shoes.

Face protection, or visor.

Note: The extensions poles are made of carbon, which conducts electricity. Do not use the extensions poles near electricity supply points or electrical wires.

Note: Do not place any part of your body close to the blade. Do not remove cut material or hold the material you wish to cut while the blades are moving

10 m

5

GENERAL OVERVIEW

CHARACTERISTICS

VIEWS OF ACCESSORIES

Référence

SC160

Alimentation 48VCC

Power 1000W Max

Weight 820g

Size

(L x l x H) in mm

420mm x 70mm x 140mm

Cutting capacity Ø100 mm maximum

Blade speed

3100 in and out movement /min

These speciﬁcations are given as an indication only. Under no circumstances may they be considered as contractually binding. They are subject to modiﬁcation

without prior notice in the interests of product development. Patented equipment

Blade cover

Removable cover

Saw head

Removable cover screw

Saw blade

Hook

Handle nozzle

Battery 500Wh

10,4 Amp.

Réf : L810B

Power cord

Réf : PW225S

PW2 handle

Réf : PW2

Battery 150Wh

3,1 Amp.

Réf : 731B

Pole PW930

length : 93cm

Pole PW1830

Length : 183cm

Pole PWT1650

Length : 106 à 164cm

Réf : PW930 - PW1830 -

PWT1650

NOT

L810B

NOT

PW2

NOT

PW2

NOT

F3010

NOT

SC160

6

USER’S MANUAL

Only use INFACO brand batteries with a supply voltage 48 volts.

It is imperative to read the operating instructions for the tools and accessories before handling or connecting the tool.

If it is raining, the battery vest must be worn underneath waterproof clothing so that the battery unit and control box remain dry.

INSTALLATION AND POWER CONNECTION

A

OFF ON

F

USING THE MACHINE

2

1

A /

B/

C/

7

D / E /

H /

J /

I/

F /

G /

1

2

1 Start: : 2 short pulls of the trigger = ON Standby output : 2 short pulls of the trigger = ON Normal operation : 1 long pull of the trigger = ON

Releasing the trigger = OFF

OFF

ON

The tool is ﬁtted with an electronic protection system. As soon as the tool becomes blocked due to meeting strong resistance, the electronic system causes the motor to stop. Restart the tool by carrying out operation "j" in “Using the Tool” on page 8

8

USING WITH EXTENSION POLE

WITH TELESCOPIC POLE

Imperatively unplug the machine.

1

2

3

1

2

9

CLEARANCE ADJUSTMENT

WEEKLY GREASING

The user must be very vigilant in continuously when the tool is situated at the end of the pole, so as to avoid any risk of injury or damage.

Note: The extensions poles are made of carbon, which conducts electricity. Do not use the extensions poles near electricity supply points or electrical wires.

10 m

If no movement = jeu OK If movement = adjust the clearance

Imperatively unplug the machine.

10

SAFETY PRECAUTIONS

Upon starting the tool, if an unusually large vibration is detected, stop the tool

immediately and check the blade adjustment.

If this unusual vibration persists, immediately turn off the tool and contact your

nearest dealer.

For transportation, storage, maintenance, tool maintenance or any other operation outside of using the tool, you must unplug the tool.

Must keep both hands

1

o

2

A /

B /

C/

11

Before starting work

At the end of work daily

Each time the battery is

changed

Monthly

Yearly

If faulty

If damaged

As required

Weekly

CARE AND MAINTENANCE

All maintenance operations must be performed with the tool disconnected from all power sources.

Maintenance of the tool depends on the frequency of tool use.

Occasional use, space out intervals. Intensive use, more frequent intervals. .

X X

X

X X

X

X X

X X X

X X X X

X X X

X X

Complete tool

Visual inspection

Cleaning

Have checked by dealer

Accessories

Cleaning and greasing

Blade adjustment

Check

Adjust

Saw blade

Visual inspection

Cleaning

Change

Saw head

Check the adjustment

Greasing

Have checked by dealer

Power cord Visual inspection

Battery Visual inspection

Vest

Visual inspection

Handle

Visual inspection

12

CARE - CHANGING THE BLADE

Saw blade SCP3 SCP4 SCP4S

New saw blade : SCP3 SCP4 SCP4S

Only use blades POWERCOUP dedicated to the saw.

A /

B /

C/

E/ F/

D/

13

G/

I/ J/

L/

K/

H/

14

CARE - BLADE ADJUSTMENT

A /

B /

C/

E/

F/

D/

2

1

15

CARE - CLEANING AND GREASING

A /

B /

C/

F/

D/

E/

G/

H/

I/ J/

16

BEWARE! In order to reduce the risk of electrical discharge, injury and ﬁre during the use of electrical tools, please observe the following basic safety measures. Read and follow these instructions before using the tool, and keep these safety instructions!

When not in operation, the POWERCOUP PW2 handle and its accessories must be disconnected and stored in their case.

- Servicing.

- Charging the battery

- Maintenance.

- Transport.

- Storage. While the tool is in operation, always remember to keep hands away from the accessory

being used. Do not use the tool if you are tired or feeling unwell.

Wear recommended safety equipment speciﬁc to each accessory. Do not leave the tool within the reach of children or visitors.

SAFETY INSTRUCTIONS

POWERCOUP PW2 handle must always be disconnected from all power sources for to the following:

Do not use the tool if there is any risk of ﬁre or explosion- for example in the presence of ﬂammable liquids or gas.

Never use the tool at night or in poorly lit conditions without setting up extra lighting.

While using the tool, make sure you keep both feet on the ground and stay well-balanced.

Keep the power cord away from heat sources, oil or sharp edges.

BEWARE!, the extension poles and rake are made out of carbon – a conductive material. Do not use near electrical wires or other power sources.

Do not let any part of the body come close to the blade.

Do not remove the cut material or hold the material to be cut while the blades are moving.

Make sure the switch is closed when removing jammed material. When working, one second of distraction can cause an accident leading to serious injuries.

Carry the machine by its handle, with the cutting blade stopped. Always cover the cutting system with its protective casing during transport or storage. The correct handling of the saw will reduce the risk of injury from the cutting blades.

Keep the cord away from the cutting zone. When in use, the cord can be hidden in the shrubs and accidentally cut by the blade.

Never carry the charger by its power cord, and so not pull on the power cord to unplug it.

17

The POWERCOUP PW2 SC160 saw has a warranty for a period of two years against all manufacturing faults and defects.

This warranty corresponds to normal use of the tool and excludes:

- Damage due to poor maintenance or a lack of maintenance,

- Damage due to inappropriate usage,

- Damage due to normal wear and tear,

- Tools which have been dismantled by unauthorized repairers,

- External forces (ﬁre, ﬂooding, lightning, etc.),

- Damage from tool being dropped or from other impact,

- Tools with warranty cards not returned at the time of purchase,

- Tools used with a battery or charger other than those manufactured by INFACO.

INFACO shall not remit payment for any monetary loss incurred for the time the tool is unavailable during repairs.

All repairs made by a person other than an approved INFACO authorized service provider (ASP) will invalidate the equipment warranty.

In case of any breakdown, we strongly recommend that users of INFACO equipment either contact the retailer from whom they purchased the tool, or our after-sales service on (+33) 05 63 33 91 49 (France).

Please note our after-sales service shipping policy:

- For equipment submitted to us within the scope of the warranty, you pay to send it to us and we pay the return postage.

- For equipment which is not within its warranty period, you pay to send it to us and the return will be made at your cost, cash on delivery. We will send you an

estimate if the cost of the repair is more than 80 € ex-VAT.

WARRANTY CONDITIONS

18

RECOMMANDATIONS

Keep your work area tidy. Untidiness in the work area increases the risk of accidents

Take the work area environment into account. Don’t expose electrical tools to the rain. Don’t use electrical tools in a humid or wet environment. Make sure the work area is well lit. Don’t use electrical tools if there are ﬂammable liquids or gases in the vicinity.

Protect yourself against electrical discharge. Avoid bodily contact with grounded surfaces, such as, for example: battery charger, multiway electrical sockets, etc.

Keep children away! Don’t allow other people to touch either the tool or the power cord. Keep others well away from your work area.

Store your tools in a safe place. Tools not in use should be stored in a dry, enclosed place, in their original packaging and out of the reach of children.

Wear suitable working gear. Do not wear ﬂowing clothes or jewelry. These could get caught up by moving parts. When working outdoors, it is recommended that you wear rubber gloves and shoes with non-slip soles. Use a hairnet if you have long hair.

Wear protective goggles. Use a mask as well if the work you are doing produces dust or debris.

Take care of the power cord. Never carry the charger by its power cord and so not pull on the power cord to unplug it. Keep the power cord away from heat sources, oil or sharp edges.

Take good care of your tools. Regularly check the condition of the power cord and plug, and have them changed by an Authorized Service Provider (ASP) if they show any signs of damage. Keep the POWERCOUP PW2 material dry and free of oil and grease.

Remove the tool keys. Remove any adjustment keys before switching on the tool.

Check whether your tool is damaged. Before using the tool again, carefully check that the safety features are in perfect working order and whether any parts have been even slightly damaged.

Have your tool repaired by a specialist. This tool is compliant with the safety regulations in force. All repairs must be carried out by an Authorized Service Provider (ASP) or by INFACO and exclusively using original parts. Parts which are not original may seriously risk the safety to the user.

19

TROUBLESHOOTING

Problem Cause Solution

Abnormal heavy vibrations

Improper mounting of the blade

Disassemble and reassemble the blade following the procedure

Blade adjustment too important

Set the blade adjustment following the procedure and contact your dealer if necessary

Bad cuts

Blade wear

Change the worn blade following the procedure.

Noise in the pole

Deteriorated pole guide Contact your dealer

Tool does not start

Battery drained Recharge the battery

No power to the tool Reconnect to power source

Others Contact your dealer

Tool suddenly stops

Too much pressure on the branches. Do not force on the tool

Battery drained Recharge the battery

Diameter of branches too large

Cut branches with a diameter smaller

20

Notes :

................................................................................................................................................................................

21

Notes :

................................................................................................................................................................................

22

Notes :

................................................................................................................................................................................

23

Notes :

................................................................................................................................................................................

24

RETAILER SECTION

The retailer to keep this section

WARRANTY CARD

RETURN this form IMMEDIATELY, ﬁlled in with CAPITAL LETTERS to ensure full warranty coverage..

Month / year of manufacture : ......................................

Last name : ......................................................................................................................................

First name : .....................................................................................................................................

Company name : ..............................................................................................................................

Street address : ...........................................................................................................................

............................................................................................................................................................

City : ............................................................................................................................................

Zip code : .................................................

Phone : ...................................................

Purchase date : ........./........./.........

Do you already own an ELECTROCOUP pruning shear ? :

If yes, serial # ............................

Observation : ....................................................................................................................................

Month / year of manufacture : .................................................................

Last name : .............................................. First name : ................................................................

Company name : ............................................................................................................................

Street address : ...........................................................................................................................

............................................................................................................................................................

City: : ................................................. Zip code : .........................................................................

Phone : .................................... Fax : .................................. E-mail : .........................................

Purchase date : ........./........./.........

Yes

SC160Model:

Modèle SC160

Oui

Fruit growing

Pruning

Wine growing

Landscaping

No

Non

CUSTOMER SIGNATURE

RETAILER STAMP

Do you already own an ELECTROCOUP pruning shear ? :

Observation : ..............................................

If yes, serial # ...................

INFACO S.A.S

Bois de Roziès

81140 CAHUZAC SUR VERE

(France)

RETAILER

TO BE KEPT

BY THE RETAILER FOR THE

INFACO

Technical information or After-Sales:

INFACO S.A.S. Bois de Roziès

81140 CAHUZAC-SUR-VÈRE (FRANCE)

Tél. : (+33)05 63 33 91 49 - Fax : (+33)05 63 33 95 57

E-mail : electrocoup@infaco.fr

Vidéos techniques disponibles sur le site internet : www.infaco.com

EQUIPMENT MANUFACTURED IN FRANCE

Manufacturer: : INFACO S.A.S. - 81140 CAHUZAC-SUR-VÈRE (FRANCE)

Type: : Saw SC160

Weight of POWERCOUP PW2 Saw : Modèle SC160 2100g

Max. power : 1000 W

Battery voltage : 48 Volts

This information is being given for informational purposes only. It is under no circumstances contractual, and is subject to modiﬁcation for reasons of improvement, without prior notice.

Patented equipment..

The following pictograms are used in this user’s manual:

Indicates a risk of bodily harm, danger of death or a risk of damage to the tool if the instructions given in this user’s manual are not followed.

Indicates the presence of electrical voltage.

Read this user’s manual carefully before using the tool. Make sure that you have understood how the tool works and is operated. Take good care of the tool in compliance with these instructions, so that it will always function correctly. Keep this user’s manual and the attached documentation close to the tool.

27

Déclaration d'incorporation

Declaration of Incorporation

INFACO s.a.s. déclare que la quasi-machine neuve désignée ci-après :

INFACO S.A.S. declares that the new partly-completed machine designated below:

Scie électroportative

Electronic saw

De marque – Brand name : INFACO Modèle - Model : SC160 N° de série – Serial no : Année de fabrication – Year of manufacture :

Est conforme aux dispositifs des directives :

Complies with the provisions of the directives for:

- “Machines” (directive 2006/42/CEE).

“Appliances” (directive 2006/42/CEE)

- “Emissions sonores machines utilisées en extérieur” directive 2000/14/CE (arrêté du 18 mars 2002) modiﬁée par la 2005/88/CE (arrêté du 22 mai 2006).

Directive 200/14/EC « on the noise emission by equipment for use outdoors » (order of 18 march 2002) modiﬁed by the directive 2005/88/EC (order of 22 may 2006).

- La personne autorisée à constituer le dossier technique au sein d’INFACO est M.ALVAREZ Grégory.

The person authorized to compile the technical ﬁle within the company INFACO is Mr. Gregory ALVAREZ.

INFACO s’engage à fournir aux autorités nationales les informations pertinentes concernant la machine.

Fait à - Signed in : CAHUZAC SUR VÈRE Le – Date : 19/06/2017 M. DELMAS Daniel, Président de la Société INFACO - INFACO President

Signature – Signature :

INFACO undertakes to provide national authorities with all relevant information concerning the machine.

NOT PW2 SC160 - EN - 2017 - IND 01

28

La quasi-machine ne doit pas être mise en service avant que la machine ﬁnale dans laquelle elle doit être incorporée ait été déclarée conforme aux dispositions pertinentes de la présente directive.

The partly-completed machine must not be put into service until the ﬁnal machine into which it is to be incorporated has been declared in conformity with the relevant provisions of this Directive.

POWERCOUP PW2 - SC160

Niveau de pression acoustique pondéré A au poste de travail, LpA (NF EN 60745-2-11 : 2009) 87 dB(A)

Sound pressure level LpA

Valeur mesurée d'émission vibratoire, ah (EN12096) 11.1 m/s

2

Measured value of vibratory emission, ah

infaco Powercoup PW2 SC160 Assembly Instructions Manual

Specifications and Main Features

Frequently Asked Questions

User Manual