Model 600
www.inergyhome.com
www.inergyhome.com
USB ADAPTOR TO FIT INTO
CIGARETTE LIGHTER SOCKET
USB 2.1A Top Connector
USB 1A Bottom Connector
110VAC 600W Max
Power Switch
12VDC 5A Max
Battery Status Indicator
Cigarette lighter
socket with 15A output
Cooling Exhaust
Charge Indicator
Charge Input
INSTRUCTION MANUAL 600W POWER SUPPLY
This power supply is designed for all major brand cellular phones, laptop
computers, digital portables such as video cameras, digital cameras, portable
gaming devices, and other handheld electronics.
Before You Begin:
Only use this device after reading all the instructions.
It’s normal for the power supply to get warm to the touch when
in use, avoid leaving power supply in prolonged sunlight or next
to heat sensitive materials.
Safety Precautions:
Do not use with any appliance with dangerous voltage warning.
Do not use with over 16V DC input.
Do not go over the inverter wattage.
Never block ventilation to the power supply.
Do not use power supply near any open flame, flammable liquid, or gases.
Do not expose to liquid or moisture or humidity.
Do not attempt to dissemble.
Do not handle with wet hands.
Do not put metal fragments (eg. such as wire) inside.
Keep out of reach of children.
Technical Specifications
Output rated power 400W Capacity/600W Inverter
Output voltage and frequency 100-120V/60Hz
Output voltage for USB ports Top: 2.1A Bottom: 1A
Output Cigarette lighter socket 15A
Protections Short circuit, overload, over
temperature, low battery voltage,
over battery voltage
Input voltage range 11-15VDC
Over voltage shutdown DC15V-16V
Low voltage shutdown DC10V-10.5V
Operation Guide:
To charge, plug in charger to charge input
Red charge indicator will light up.
To Use: turn on power switch.
Battery status indicator shows the battery power.
Remove USB adaptor to use cigarette lighter socket.
Connect to 110VAC outlets just as you would in your home.
Use the 12VDC front connector for 5A max power.
Note: DC outlets are live when unit os on or off.