Industrial Computers FS-A76 User Manual
FS-A76
PICMG1.3 Full-size CPU Card
User’s Manual
Edition 1.0
2013/01/14
FS-A76 User’s Manual
-1-
Copyright
Copyright 2013, all rights reserved. This document is copyrighted and all rights are
reserved. The information in this document is subject to change without prior notice to
make improvements to the products.
This document contains proprietary informat ion and protected by copyright. No part of
this document may be reproduced, copied, or translated in any form or any means
without prior written permission of the manufacturer.
All trademarks and/or registered trademarks contains in this docume nt are property of
their respective owners.
Disclaimer
The company shall not be liable for any incidental or consequential dam ages resulting
from the performance or use of this product.
The company does not issue a warranty of any kind, express or implied, including
without limitation implied warranties of merchantability or fitness for a particular purpose.
The company has the right to revise the manual or include changes in the specifications
of the product described within it at any time without notice and without obligation to
notify any person of such revision or changes.
Trademark
All trademarks are the property of their respective holders.
FS-A76 User’s Manual
-2-
Packing List:
Please check the package content before you starting using the board.
Hardware:
FS-A76 PICMG1.3 Full-size CPU Card motherboard x 1
Cable Kit:
SATA Cable x 2
(OALSATA-L)
Printed Matters:
Driver CD (Including User’s Manual) x 1
USB Cable x 1
(OALUSBA-1)
4-pin to 3-pin ATX cable x 1
(OAL-A TX-C)
PS/2 Keyboard & Mouse Cable x 1
(OALPS2/MK)
Audio Port Cable x 1
(OAPJ-HD)
DB25 & DB9 cable x 1
(FS-A76TDG/ FS-A76FTDG Only)
(
OAL1S1P
)
DB25 cable x 2 & DB9 cable x 1
(FS-A76TDG2/ FS-A76FTDG2 Only)
(
OAL2S1P
)
DVI module with bracket x 1
(ADPDVI & OALDVI-DF13)
FS-A76 User’s Manual
-3-
Index
Chapter 1 <Introduction>.............................................................6
1.1 <Product Overview>.....................................................................................6
1.2 <Product Specification>................................................................................7
1.3 <Mechanical Drawing>.................................................................................9
1.4 <Block Diagram>........................................................................................10
Chapter 2 <Hardware Setup>..................................................11
2.1 <Connector Location>................................................................................ 11
2.2 <Jumper Location & Reference>................................................................12
2.3 <Connector Reference>.............................................................................13
2.3.1 <Internal Connectors>.............................................................. 13
2.3.2 <External Connectors>.............................................................13
2.4 <CPU and Memory Setup>........................................................................14
2.4.1 <CPU Setup>.............................................................................14
2.4.2 <Memory installation>...............................................................15
2.5 <CMOS Setup>..........................................................................................15
2.6 <Serial ATA Interface>................................................................................16
2.7 <Ethernet Interface>...................................................................................17
2.8 <Onboard Display Interface> .....................................................................18
2.8.1 <Analog Display>.......................................................................18
2.8.2 <DVI Display >...........................................................................19
2.9 <Integrated Audio Interface>...................................................................... 20
2.10 <USB Interface>.......................................................................................22
2.11 <Serial Port>.............................................................................................24
2.12 <GPIO and SMBUS Interface>.................................................................26
2.13 <Power Supply and Fan Interface >.........................................................27
2.14 <Switch and Indicator>.............................................................................28
Chapter 3 <System Setup>.......................................................29
3.1 <Audio Configuration>................................................................................ 29
3.2 <Display Properties Setting>......................................................................30
FS-A76 User’s Manual
-4-
Chapter 4 <BIOS Setup>.............................................................32
Appendix A <I/O Port Pin Assignment>..........................34
A.1 <Serial ATA Port>.......................................................................................34
A.2 <IrDA Port>.................................................................................................34
A.3 <VGA Port>................................................................................................34
A.4 <LAN Port>.................................................................................................34
A.5 <LAN LED Port>.........................................................................................35
A.6 <Parallel Port>............................................................................................35
Appendix B <Programming GPIO’s>.................................36
Appendix C <Programming Watchdog Timer >.........37
Appendix D <TPM Setup>..........................................................38
Contact Information.......................................................................39
FS-A76 User’s Manual
-5-
(This page is left for blank)
FS-A76 User’s Manual
-6-
Chapter 1 <Introduction>
1.1 <Product Overview>
FS-A76 the 3rd Generation Intel of the PICMG1.3 Full-size CPU Card motherboard,
supports 3
rd
Generation Intel® Core™ i7, Core™ i5, Core™ i3 and Pentium ® Desktop
Processor and features Intel Q77 chipset, integrated HD Graphics, DDR3 memory,
REALTEK High Definition Audio, Serial ATA and Intel Gigabit LAN.
Intel® FCLGA1155 processor
The Intel® I3/I5/I7/Pentium ® processor now comes with a new form factor with
1155-pi n FCLGA package, for 1066/1333MHz front-side-bus, 12MB L2 cache, for 65nm
and 45nm manufacturing technology, the PLGA processor without pin header on so lder
side can make user installing the processor on the socket easier.
Intel® Q77 PCH chipset
The Intel Q77 integrates DDR3 1066/1333MHz for memory, and HD Graphic technology
for new graphic engine. The Q77 integrates with up to 4 USB2.0 interfaces, and serial
ATA II interface with RAID function.
FS-A76 User’s Manual
-
7-
1.2 <Product Specification>
General Specification
Form Factor PICMG1.3 Full-size CPU Card
CPU 3rd Generation Intel® Core™ I3/I5/I7/Pentium® processor
With LGA1155 socket
Package type: FCLGA 1155
Memory 2 x 240-pin DDR3 1066/1333MHz SDRAM up to 16GB
Unbufferred, none-ECC memory supported only
Chipset Intel® BD82Q77 PCH
BIOS Phoenix 64Mb SPI flash BIOS
Green Function Power saving mode includes doze, standby and suspend modes.
ACPI version 3.0 and APM version 1.2 compliant
Watchdog Timer System reset programmable watchdog timer with 1 ~ 255 sec./min.
of timeout value
Real Time Clock Chipset built-in RTC with lithium battery
Serial ATAII Intel® Q77 PCH integrates 4 Serial ATA II interface& 2 Serial ATA IIl
RAID 0, 1,5,10 Intel Matrix Storage Technology supported
Multi-I/O Port
Chipset Intel® Q77 PCH with Winbond® W83627DHG-P Controller
Serial Port Four RS-232 and one RS232/422/485 serial ports
USB Port Four Hi-Speed USB 2.0 ports with 480Mbps of transfer rate
Four USB3.0 ports with 5Gbps of transfer rate
IrDA Port One IrDA compliant Infrared interface suppo r ts SIR
K/B & Mouse External PS/2 keyboard and mouse ports on rear I/O panel
GPIO One 12-pin Digital I/O connector with 8-bit programmable I/O
Interface
Smart Fan One CPU fan connectors for fan speed controllable
VGA Display Interface
Chipset Intel® Clear Video integrated HD Graphics Technology
Frame Buffer Up to 1.7GB shared with system memory
Display Type CRT, LCD monitor with analog display
Onboard DVI interface
Connector External DB15 female connector on rear I/O panel
Onboard 20-pin DVI Connector
Ethernet Interface
Controller One Intel 82574L Gigabit Ethernet controller
One Intel 82579LM Gigabit Ethernet controller
(FS-A76TDG&FS-A76FTDG Only)
Type Triple speed 10/100/1000Base-T
Auto-switching Fast Ethernet
Full duplex, IEEE802.3U compliant
FS-A76 User’s Manual
-
8-
Connector Two External RJ45 connectors with LED on rear I/O panel
Expansive Interface
PCI-Express One X16 and one X4 or X1 on PICMG 1.3 Interface
PCI Four PCI bus master on PICMG 1.3 Interface
Audio Interface
Chipset Intel® integrated Q77with Realtek ALC888HD Audio
Intel High Definition Audio compliance
Interface 2 channels sound output
Connector Internal 10-pin header for line-out, MIC-in, 4-pin header for CD-IN
Power and Environment
Power
Requirement
+5V, +12 DC input & 5VSB Requirement
Dimension 338 (L) x 126 (W) mm
Temperature Operatin g within 0 ~ 60P
O
p
C (32 ~ 140P
O
p
F)
Storage within –20 ~ 85
P
O
p
C (-4 ~ 185P
O
p
F)
Ordering Code
FS-A76TDG Onboard VGA, DVI, 8 x USB2.0, 6 x serial Port, 6 x SATA, HD Audio,
GPIO, 2 x PCI Express mini card, 4 x PCI Bus master,
1 x Giga LAN (82579LM)
Support Four X1 & One X16 PCI Express interface
FS-A76FTDG Onboard VGA, DVI, 8 x USB2.0, 6 x serial Port, 6 x SATA, HD Audio,
GPIO, 2 x PCI Express mini card, 4 x PCI Bus master,
1 x Giga LAN (82579LM)
Support One X4 & One X16 PCI Express interface
FS-A76TDG2 Onboar d VGA, DVI, 8 x USB2.0, 6 x serial Port, 6 x SATA, HD Audio,
GPIO, 2 x PCI Express mini card, 4 x PCI Bus master, 2 x Giga LAN
Support Four X1 & One X16 PCI Express interface
FS-A76FTDG2 Onboard VGA, DVI, 8 x USB2.0, 6 x serial Port, 6 x SATA, HD Audio,
GPIO, 2 x PCI Express mini card, 4 x PCI Bus master, 2 x Giga LAN
Support One X4 & One X16 PCI Express interface
The specifications may be different as the actual production.
FS-A76 User’s Manual
-
9-
1.3 <Mechanical Drawing>
FS-A76 User’s Manual
-
10-
1.4 <Block Diagram>
SPI BIOS
1 x Intel 82574L & 1 x 82579LM
2 x 240-pin DDR3
1066/1333MHz up to
16GB
4 x SATAII & 2 x SATA III
4 x USB 2.0
4 x USB 3.0
2 x PCI Express mini card
1 x DVI
1 x CRT
4 x RS232
1 x PCI Express x4 or
4 x PCI Express x1
4 x PCI Bus master
Intel Q77
2 x Serial ports
8-bit GPIO
IrDA
Parallel port
25Q64CV
W83627D-P
3rd Generation Intel® Core™
I3/I5/I7/Pentium® processor
TPM
FS-A76 User’s Manual
-
11-
Chapter 2 <Hardware Setup>
2.1 <Connector Location>
SYSFAN
CPUFAN
CN_PS
DC_IN
CN_12V
JFRNT
DDR3_A&B
CN_AUDIO
CN_IR
CN_SMBUS
MINI_CARD1&2
SATA1/2/3/4/5/6
CN_USB1
CN_DIO
COM6/5/4/3/2
CN_DVI
JACT1
CN_LPT
CN_USB3_1
CN_USB3_2
CN_USB2
PS2 COM1 RJ45_1 CRT
FS-A76TDG & FS-A76FTDG
FS-A76TDG2 & FS-A76FTDG2
PS2 RJ45_2 RJ45_1 CRT
JSPD1
(FS-A76TDG & FS-A76FTDG)
JACT2
JSPD2
COM6/5/4/3/2/1
(FS-A76TDG2 & FS-A76FTDG2)
Loading...