INDESIT ZIS6 1 W Daily Reference Guide

Quick guide
high temp.
med-high temp.
medium temp.
med-low temp.
low temp.
high temp.
med-high temp.
medium temp.
med-low temp.
low temp.
on - o
EN
THANK YOU FOR BUYING AN INDESIT PRODUCT
In order to receive a more complete assistance, please register your product on www . indesit . com/ register
PRODUCT DESCRIPTION
Wait at least two hours, after the installation, before connecting the appliance to the power supply. Connect the appliance to the power supply and turn the thermostat knob to switch on the appliance.
CONTROL PANEL
3.
Before using the appliance carefully read the Safety Instruction.
After turning the appliance on, you must wait for 4‑6 hours for the correct storage temperature to be reached for a normally lled appliance. Position the antibacterial anti‑odour lter in the fan as demonstrated in the lter packaging (if available).
1. Temperature button
2. Fast Cooling button
3. Indicator LEDs
1.
2.
TEMPERATURE BUTTON
Press the Temperature button on the control panel to adjust the temperature from the warmest through the lower to the coldest level. Pressing the Temperature button, the temperature setting will change cyclically. At rst plug‑in of appliance temperature setpoint is present at medium position (factory setting). Following table shows temperature setpoints::
High temp.
Med‑high temp.
Medium temp.
Med‑low temp.
Low temp.
Led ON Led OFF
Note: Displayed set points correspond to the average temperature throughout the whole refrigerator.
FAST COOLING BUTTON
The use of the Fast Cooling function is recommended:
to increase the cooling speed of the refrigerator compartment when placing a very high quantity of food within it,
To activate the Fast Cooling function, press and hold for 3seconds the Temperature button on the control panel till all the 3 LEDs will turn on.
INDICATOR LEDS
To display the current temperature setpoint or the Fast Cooling function.
REFRIGERATOR LIGHT
The light system inside the refrigerator compartment uses LEDs light, allowing a better lightning as well as a very low energy consumption. If the LED light system does not work, please contact the Service to replace it.
Important: The refrigerator compartment light switches on when the refrigerator door is opened. If the door is kept open for more then 8 minutes the light will be automatically switched o.
FAN
The fan improves temperature distribution inside the refrigerator compartment, allowing better preservation of stored food. By default, the fan is switched on. It is advisable to keep the fan switched on, so that the “6
th
Sense” function can work properly and also when the ambient air temperature is above 27 ‑ 28°C or if you notice drops of water on the glass shelves or in sever humidity conditions. To turn o the fan press the button of fan. Please note that when the fan is switched on it will not continuously work. The fan will start/stop working depending on the temperature and/or humidity level inside the fridge. It is therefore absolutely normal if the fan does not move even if the fan is switched on.
The function is automatically deactivated after 6 hours and return to previous selected set point. The function can be manually deactivated by pressing and holding for 3 seconds the Temperature button on the control panel.
HOW TO STORE FRESH FOOD AND BEVERAGE
Legend
FREEZER ZONE
TEMPERATE ZONE
Suggested for the storage of tropical fruit, cans, drinks, eggs, sauces, pickles, butter, jam
COOL ZONE
Suggested for the storage of cheese, milk, daily food, delicatessen, yogurt
COOLEST ZONE
meat
FRUIT & VEGETABLE DRAWER
Legend
FREEZER ZONE
Legend
FREEZER ZONE
TEMPERATE ZONE
Suggested for the storage of tropical fruit, cans, drinks, eggs, sauces, pickles, butter, jam
Legend
FREEZER ZONE
TEMPERATE ZONE
Suggested for the storage of tropical fruit, cans, drinks, eggs, sauces, pickles, butter, jam
COOL ZONE
Suggested for the storage of cheese, milk, daily food, delicatessen, yogurt
Legend
FREEZER ZONE
TEMPERATE ZONE
Suggested for the storage of tropical fruit, cans, drinks, eggs, sauces, pickles, butter, jam
COOL ZONE
Suggested for the storage of cheese, milk, daily food, delicatessen, yogurt
COOLEST ZONE
meat
Legend
FREEZER ZONE
TEMPERATE ZONE
Suggested for the storage of tropical fruit, cans, drinks, eggs, sauces, pickles, butter, jam
COOL ZONE
Suggested for the storage of cheese, milk, daily food, delicatessen, yogurt
COOLEST ZONE
meat
FRUIT & VEGETABLE DRAWER
Legend
X X
TROUBLESHOOTING
What to do if... Possible reasons Solutions
FREEZER ZONE
TEMPERATE ZONE
Suggested for the storage of tropical fruit, cans, drinks, eggs, sauces, pickles, butter, jam
COOL ZONE
Suggested for the storage of cheese, milk, daily food, delicatessen, yogurt
COOLEST ZONE
Suggested for the storage of cold cuts, desserts, sh and meat
FRUIT & VEGETABLE DRAWER
The appliance doesn’t work. There may be an appliance power
The inside light does not work.
The internal temperature of the compartments is not cold enough.
There is water on the bottom of the refrigerator compartment.
The front edge of the appliance that the door gaskets seal against is hot.
The temperature of the refrigerator compartment is too cold.
supply problem.
It may be necessary to replace the light bulb.
The reasons could vary (see “Solution”) column.
The defrost water drain is blocked. Clean the defrosting water drain (see section “Cleaning and
This is not a problem. It prevents condensation from forming.
The set temperature is too cold. Try to set a less cold temperature.
Make sure:
there is not a power failure;
the plug is properly inserted in the power socket and the double‑ pole switch (if present) is in the correct position (on);
the household electrical system protection devices function;
the power cable is not broken.
Disconnect the appliance from the power supply and contact the Technical Assistance Service if you need a replacement.
Check that:
the doors are closed properly;
the appliance is not installed near a heat source;
the temperature is appropriately set;
the circulation of air through the ventilation grilles on the base of the appliance is not obstructed.
Maintenance").
A solution is not needed.
Turn o the fan (if present) described in the paragraph “FAN”.
You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:
Visiting our website docs . indesit . eu
Using QR Code
Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After‑sales Service, please state the codes provided on your product's identication plate.
19515454600
Loading...