Indesit I5TMH6AG U, I5GMH6AG, I5TMH5AG.1 U, I5GMH2AG U, I5GMH5AG U Operating Instructions Manual

...

English

Operating Instructions

COOKER AND OVEN Contents

Operating Instructions,1

Description of the appliance-Overall view,5 Description of the appliance-Control Panel,6 Installation,7 Start-up and use,12 Cooking modes,13 Precautions and tips,19 Care and maintenance,20 Assistance,20

Polski

Instrukcja obsługi

KUCHENKA I PIEKARNIK Spis treści

Instrukcja obsługi,1

Opis urządzenia-Widok ogólny,5 Opis urządzenia-Panel sterowania,6 Instalacja,23 Uruchomienie i użytkowanie,29 Użytkowanie piekarnika,30 Zalecenia i środki ostrożności,36 Konserwacja i utrzymanie,37 Serwis Techniczny,37

Lietuviu

Naudojimo instrukcijos

viryklë ir orkaitë

Turinys

Naudojimo instrukcijos,1

Prietaiso aprašymas -Bendras vaizdas,5 Prietaiso aprašymas -Valdymo pultas,6 Montavimas,40 Ájungimas ir naudojimas,45 Orkaitës naudojimas,46 Atsargumo priemonës ir patarimai,52 Techninë prieţiűra,53 Pagalba,53

Latviešu

Lietođanas instrukcija

PLÎTS UN KRASNS Saturs

Lietođanas instrukcija,1

Ierîces apraksts -Vispârîga informâcija,5 Ierîces apraksts - Vadîbas panelis,6 Uzstâdîđana,55 Ieslçgđana un lietođana,60 Cepeđkrâsns lietođana,61 Piesardzîbas pasâkumi un ieteikum,66 Tehniskâ apkope un kopđana,67 Palîdzîba,67

Eesti keeles

Kasutusjuhend

PLIIT JA AHI Sisukord

Kasutusjuhend,1

Seadme kirjeldus - Ülevaade,5 Seadme kirjeldus - Juhtpaneel,6 Paigaldamine,69 Esmakäitamine ja kasutamine, 74 Pliidi kasutamine,75 Ettevaatusabinőud ja soovitused, 81 Hooldus,82 Klienditugi,82

LietuviuLietuviu

Spis treści

Instrukcja obsługi

KUCHENKA I PIEKARNIK

Naudojimo instrukcijos

viryklë ir orkaitë

Turinys

Latviešu

Lietođanas instrukcija

PLÎTS UN KRASNS Saturs

Kasutusjuhend

PLIIT JA AHI Sisukord

English

WARNING

UWAGA

ĮSPĖJIMAS

BR Ī DIN Ā

JUMS

HOIATUS

I5TMH6AG U I5GMH6AG.1 U I5GMH6AG U I5TMH5AG.1 U I5GMH2AG U I5GMH5AG U I5GMHA U

I5GMH1A U I5GMH5AG U I5GMH6AG U

WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements.

Children less than 8 years of age shall be kept away unless continuously supervised.

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in fire.

NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket.

Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in shattering of the glass.

The internal surfaces of the compartment (where present) may become hot.

Never use steam cleaners or pressure cleaners on the appliance.

Remove any liquid from the lid before opening it.

Do not close the glass cover (if present) when the gas burners or electric hotplates are still hot.

WARNING: Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock.

CAUTION: the use of inappropriate hob guards can cause accidents.

WARNINGWARNING

UWAGA: To urządzenie oraz jego dostępne części silnie się rozgrzewają podczas użytkowania.

Należy uważać, aby nie dotknąć elementów grzejnych. Nie pozwalać, aby dzieci poniżej 8 roku życia zbliżały się do urządzenia, jeśli nie są pod stałym nadzorem dorosłych.

Z niniejszego urządzenia mogą korzystać dzieci powyżej 8 roku życia i osoby o ograniczonych zdolnościach  zycznych, zmysłowych bądź umysłowych, jak również osoby nieposiadające doświadczenia lub znajomości urządzenia, jeśli znajdują się one pod nadzorem innych osób lub jeśli zostały pouczone na temat bezpiecznego sposobu użycia urządzenia oraz zdają sobie sprawę ze związanych z nim zagrożeń. Dzieci nie powinny bawić się urządzeniem. Prace związane z czyszczeniem i konserwacją nie mogą być wykonywane przez dzieci, jeśli nie są one nadzorowane.

UWAGA: Pozostawienie bez nadzoru na kuchence tłuszczów i olejów może być niebezpieczne i może spowodować pożar.

Nie należy NIGDY próbować ugasić płomieni/pożaru wodą; należy wyłączyć urządzenie i przykryć płomień np. pokrywką lub ognioodpornym kocem.

UWAGAUWAGA

! When you place the rack inside, make sure that the stop is directed upwards and in the back of the cavity.

Nie stosować środków ściernych ani ostrych łopatek metalowych do czyszczenia szklanych drzwiczek piekarnika, ponieważ mogłyby porysować powierzchnię i spowodować pęknięcie szyby. Wewnętrzne powierzchnie szu ady (jeśli

jest w danym modelu) mogą się nagrzewać. Nie stosować nigdy oczyszczaczy parowych

lub ciśnieniowych do czyszczenia urządzenia. Usunąć ewentualne płyny na pokrywie przed jej otwarciem. Nie zamykać szklanej pokrywy (jeśli jest częścią wyposażenia), jeśli palniki gazowe lub płyta elektryczna są jeszcze rozgrzane.

UWAGA: Przed wymianą żarówki, należy się upewnić, że urządzenie jest wyłączone, aby uniknąć ryzyka porażenia prądem.

UWAGA: użycie niewłaściwych zabezpieczeń płyty może być przyczyną wypadków.

ĮSPĖJIMAS! Naudojamo prietaiso paviršiai ir pasiekiamos dalys įkaista.

Būkite atsargūs ir neprisilieskite prie įkaitusių prietaiso dalių.

Jaunesni nei 8 metų vaikai gali būti prileidžiami prie prietaiso tik prižiūrimi suaugusiųjų.

Vyresni nei 8 metų vaikai ir asmenys, turintys ﬁ zinių, jutimo ar psichinių sutrikimų arba nepakankamai žinių ar patirties, šiuo prietaisu gali naudotis tik tuo atveju, jei jie yra prižiūrimi arba instruktuojami, kaip saugiai naudoti prietaisą, taip pat supranta kylančias grėsmes. Vaikams turi būti draudžiama žaisti su prietaisu. Neprižiūrimi vaikai taip pat negali valyti prietaiso ar atlikti jo priežiūros darbų.

ĮSPĖJIMAS! Ant įjungtos viryklės palikti indai su riebalais ar aliejumi gali sukelti gaisrą.

NIEKADA nebandykite liepsnos gesinti vandeniu – išjunkite prietaisą ir kuo nors uždenkite liepsną, pavyzdžiui, dangčiu arba priešgaisriniu apklotu.

Orkait

ės durelių stiklo nevalykite šiur-

kščiomis valymo priemonėmis arba

aštriais metaliniais šveistukais, priešingu atveju kyla grėsmė subraižyti sti-

klo paviršių, o dėl to stiklas paprastai sutrūkinė

ja.

Vidiniai stalčiaus (kur yra) paviršiai gali

kaisti. Niekuomet nevalykite prietaiso gariniais ar slė

giniais valikliais.

Prieš atidarydami gaubtą nuo jo nuvalykite skysčius.

Neuždarykite stiklinio dangčio (jei sumontuotas), kol dujiniai degikliai arba elektrinės kaitlentės neatvėso.

ĮSPĖJIMAS

SPĖJIMAS! prieš keisdami lemputę

elektros prietaisą atjunkite nuo elektros maitinimo tinklo – nepatirsite elektros smūgio.

ATSARGIAI! Netinkamų viryklės apsaugų naudojimas gali sukelti nelaimingą atsitikimą

BRĪDINĀJUMS! Ierīce lietošanas laikā stipri sakarst.

Nepieskarieties sakarsušajām ierīces daļām. Bērni, kuri ir jaunāki par astoņiem gadiem, drīkst atrasties ierīces tuvumā tikai stingrā pieaugušo uzraudzībā.

Ierīci drīkst lietot bērni, kuri ir sasnieguši astoņu gadu vecumu, bet personas ar ierobežotām ﬁ ziskajām, maņu vai garīgajām spējām un personas, kurām nav ierīces lietošanas pieredzes vai nepieciešamo zināšanu, tikai tad,

BRĪDINĀJUMSBRĪDINĀJUMS

ĮSPĖJIMAS

! Wsuwając ruszt, naleĪy siĊ upewniü, Īe ogranicznik jest skierowany ku górze i znajduje siĊ on w tylnej czĊĞci

komory.

! Padơklą Ƴstumdami Ƴ orkaitĊ Ƴsitikinkite, kad stabdiklis nukreiptas Ƴ viršǐ, ir Ƴsistumtǐ iki angos galo.

rotaļāties ar ierīci. Bērni nedrī

kst bez

uzraudzības tīrīt ierīci un veikt tās apko

pi.

BRĪDINĀJUMS! Atstājot uz ieslēgtas plīts virsmas pannu ar taukiem vai eļļu, radīsit ugunsgrēka risku.

NEKĀDĀ GADĪJUMĀ nemēģiniet dzēst uguni ar ūdeni, bet izslēdziet plīti un nosedziet liesmu ar vāku vai nedegošu pārsegu.

un iespējamajiem riskiem. Bērni nedrīkst

Cepeškrāsns durvju stiklu nedrīkst tīrīt ar abrazīviem tīrīšanas līdzekļiem vai asiem metāla skrāpjiem, jo tie bojā durvju virsmu un cepeškrāsns stikls var saplīst.

Papildu nodalījuma (ja cepeškrāsns ar to ir aprīkota) iekšpuse lietošanas laikā var sakarst.

Ierīci nedrīkst tīrīt ar tvaika vai augstspiediena tīrītājiem.

Pirms pārsega atvēršanas notīriet no tā visu šķidrumu.

Ja gāzes degļi vai elektriskās sildīšanas virsmas joprojām ir karstas, stikla pārsegu (ja tāds ir) nedrīkst aizvērt.

BRĪDINĀJUMS! Pirms cepeškrāsns lampiņas nomaiņas pārbaudiet, vai ierīce ir izslēgta, lai nomaiņas laikā novērstu elektriskās strāvas trieciena

risku. UZMANĪBU! Neatbilstošu plīts virsmas

aizsargu lietošana var izraisīt nelaimes gadījumus.

HOIATUS: sisselülitatud seade ja selle juurdepääsetavad osad muutuvad kasutamise ajal kuumaks.

Olge ettevaatlik ja vältige kontakti kütteelementidega.

Alla 8-aastased lapsed tuleb hoida seadmest eemal, v.a. juhul, kui nendele on tagatud pidev järelevalve. Vanemad kui 8-aastased lapsed ja isikud, kellel on vähenenud füüsilised, meelelised või vaimsed võimed või vähesed kogemused ja oskused, võivad seda seadet kasutada juhul, kui on tagatud nende järeelvalve ning neile on antud juhised seadme ohutuks kasutamiseks ja nad mõistavad seadme kasutamisest tulenevaid ohte.

Lapsed ei tohi seadmega mängida. Lapsed võivad seadet puhastada ja hooldada ainult siis, kui on tagatud nende järelevalve.

HOIATUS: rasvas või õlis küpseva toidu jätmine keeduplaadile järelevalveta on ohtlik ja võib põhjustada tulekahju.

Tulekahju kustutamiseks ÄRGE kasutage vett, vaid lülitage seade välja ja seejärel katke leek näiteks kaane või tuletekiga.

Ärge kasutage ahju klaasukse puhastamiseks tugevatoimelisi abrasiivseid puhastusvahendeid, sest need võivad kriimustada pinda ja klaas võib praguneda.

Panipaiga (kui on) sisepinnad võivad muutuda kuumaks.

Ärge kasutage seadme puhastamiseks auru- ega survepuhastusseadmeid.

Enne kaane avamist eemaldage sellele kogunenud vedelik.

Ärge sulgege klaaskaant (kui on olemas), kui gaasipõletid või elektrilised keeduplaadid on veel kuumad.

HOIATUS: enne lambi väljavahetamist veenduge, et seade on välja lülitatud – elektrilöögioht!

TÄHELEPANU: valede keeduplaadipiirete kasutamine võib põhjustada õnnetusi.

HOIATUSHOIATUS

ja tās tiek uzraudzītas vai ir atbilstoši

informētas par ierīces drošu lietošanu

! Ievietojot režƧi, pƗrliecinieties, ka apturƝtƗjs ir vƝrsts augšup un atrodas dobuma aizmugurƝ.

! Kui lükkate resti ahju, siis jälgige, et piiraja jääb ülespoole, õõnsuse taha.

1.Hob burner

2.Hob Grid

3.Control panel

4.Sliding grill rack

5.DRIPPING pan

6..Adjustable foot

7.Containment surface for spills

8.GUIDE RAILS for the sliding racks

9.position 5

10.position 4

11.position 3

12.position 2

13.position 1

14.Glass Cover *

Description of the appliance

Overall view

1.Palnik gazowy

2. Ruszta płyty podpalnikowej

3.Panel kontrolny

4.Półka ruszt

5.Półka brytfanna

6.Nóżki regulowane

7. Płyta podpalnikowa

8.Prowadnice półek

9.pozycja 5

10.pozycja 4

11.pozycja 3

12.pozycja 2

13.pozycja 1

14.Szklana pokrywa*

Opis urządzenia

Widok ogólny

1. Dujų degiklis

2.Kaitlentès tinklelis

3.Valdymo pultas

4.KEPSNINÈ

5.SURINKIMO INDAS

6. Reguliuojamoji kojelè

7.TIškalų sulaikymo paviršius

8.Slankiųjų grotelių TAKELIAI

9.padètis 5

10.padètis 4

11.padètis 3

12.padètis 2

13.padètis 1

14.Stiklinis gaubtas* *Yra tik tam tikruose modeliuose

Prietaiso aprađymas

Bendras vaizdas

1.Gćzes deglis

2.Plīts virsmas režģisģ

3.Vadības panelis

4.GRILĒŠANA

5.CEPE TAUKU PANNA

6. Regulējama kāja

7.Norobe˛ota virsma traipiem

8.VADOTNES slīdošo pamatņu ievietošanai un izņemšanai

9.pozīcija 5

10.pozīcija 4

11.pozīcija 3

12.pozīcija 2

13.pozīcija 1

14.Stikla pārsegs* *Pieejams tikai noteiktiem modeļiem

Ierîces apraksts

Vispariga informacija

1.Gaasipõleti

2.Rest

3.Juhtpaneel

4.GRILL

5.TILGAPANN

6. Reguleerimisjalg

7.Tilgaalus

8.SIINID restide sisestamiseks

9.tasand 5

10.tasand 4

11.tasand 3

12.tasand 2

13. tasand 1

14.Klaaskate* *Ainult mőnedel mudelitel

Seadme kirjeldus

Ülevaade

1 2

4 5

8 9 10 11 12 13 6

*Tylko w niektórych modelach

*Available only on certain models

Description of the appliance

Control panel

Opis urządzenia

Panel kontrolny

Ierîces apraksts

Vispariga informacija

Seadme kirjeldus

Juhtpaneel

Prietaiso aprađymas

Valdymo pultas

1.TIMER knob*

2.Electronic cooking programmer*

3.TIMER button*

4.COOKING TIME button*

5.COOKING END TIME button*

6.THERMOSTAT knob

7.SELECTOR knob

8.THERMOSTAT indicator light

9.Hob BURNER control knob

1.Pokrętło MINUTNIKA*

2.Programator elektroniczny*

3.Przycisk MINUTNIKA*

4.Przycisk CZASU PIECZENIA*

5.Przycisk KOŃCA CZASU PIECZENIA*

6.Pokrętło TERMOSTATU

7.Pokrętło PROGRAMÓW PIEKARNIKA

8.Lampka kontrolna TERMOSTATU

9.Pokr ętło PALNIKÓW PŁYTY GRZEJNEJ

1.LAIKMAČIO rankenčlč *

2.Elektroninč virimo programa*

3.LAIKMAČIO mygtukas*

4.VIRIMO LAIKO mygtukas*

5.VIRIMO PABAIGOS LAIKO mygtukas*

6.TERMOSTATO rankenčlč

7.PARINKIMO rankenčlč

8.Indikacinč TERMOSTATO lemputč

9.Kaitlent čs dujř degikilř valdymo rankenčlčs

*Yra tik tam tikruose modeliuose

1.TAIMERA slēdzis*

2.ELEKTRONISKAIS GATAVOŠANAS PROGRAMMĒTĀJS*

3.TAIMERA poga*

4.GATAVOŠANAS LAIKA poga*

5.GATAVOŠANAS BEIGU LAIKA poga*

6.TERMOSTATA slēdzis

7.TERMOSTATA indikatora gaisma

8.SELEKTORA slēdzis

9.DEG ĻA vadības slēdzi *Pieejams tikai noteiktiem modeļiem

1.TAIMERI nupp*

2.Elektrooniline küpsetusprogrammeerija*

3.TAIMERI nupp*

4.KÜPSETUSAJA nupp*

5.KÜPSETUSE LOPUAJA nupp

6.TERMOSTAADI nupp

7.VALIKUlüliti

8.TERMOSTAADI näidikutuli

9.POLETITE reguleernupp

*Ainult mőnedel mudelitel

*Available only on certain models

Tylko w niektórych modelach

! Before operating your new appliance please read this instruction booklet carefully. It contains important information concerning the safe installation and operation of the appliance.

! Please keep these operating instructions for future reference. Make sure that the instructions are kept with the appliance if it is sold, given away or moved.

! The appliance must be installed by a qualified professional according to the instructions provided.

! Any necessary adjustment or maintenance must be performed after the cooker has been disconnected from the electricity supply.

Room ventilation

The appliance may only be installed in permanentlyventilated rooms, according to current national legislation. The room in which the appliance is installed must be ventilated adequately so as to provide as much air as is needed by the normal gas combustion process (the flow of air must not be lower than 2 m

/h per kW of installed power). The air inlets, protected by grilles, should have a duct with an inner cross section of at least 100 cm

and should be positioned so that they are not liable to even partial obstruction (see  gure A). These inlets should be enlarged by 100% - with a minimum of 200 cm

- whenever the surface of the hob is not equipped with a flame failure safety device. When the flow of air is provided in an indirect manner from adjacent rooms (see  gure B), provided that these are not communal parts of a building, areas with increased fire hazards or bedrooms, the inlets should be fitted with a ventilation duct leading outside as described above.

! After prolonged use of the appliance, it is advisable to open a window or increase the speed of any fans used.

Disposing of combustion fumes

The disposal of combustion fumes should be guaranteed using a hood connected to a safe and efficient natural suction chimney, or using an electric fan that begins to operate automatically every time the appliance is switched on (see  gure).

! The liquefied petroleum gases are heavier than air and collect by the floor, therefore all rooms containing LPG cylinders must have openings leading outside so that any leaked gas can escape easily. LPG cylinders, therefore, whether partially or completely full, must not be installed or stored in rooms or storage areas that are below ground level (cellars, etc.). Only the cylinder being used should be stored in the room; this should also be kept well away from sources of heat (ovens, chimneys, stoves) that may cause the temperature of the cylinder to rise above 50°C.

Positioning and levelling

! It is possible to install the appliance alongside cupboards whose height does not exceed that of the hob surface.

! Make sure that the wall in contact with the back of the appliance is made from a non-flammable, heatresistant material (T 90°C).

To install the appliance correctly:

• Place it in the kitchen, dining room or the bed-sit (not in the bathroom).

• If the top of the hob is higher than the cupboards, the appliance must be installed at least 200 mm away from them.

• If the cooker is installed underneath a wall cabinet, there must be a minimum distance of 420 mm between this cabinet and the top of the hob.

Installation

Adjacent room Room requiring

ventilation

Ventilation opening for comburent air

Increase in the gap between the door and the flooring

Fumes channelled straight outside

Fumes channelled through a chimney or a branched flue system (reserved for cooking appliances)

• If the cooker is installed underneath a wall cabinet, there must be a minimum distance of 420 mm between this cabinet and the top of the hob. This distance should be increased to 700 mm if the wall cabinets are flammable (see  gure).

• Do not position blinds behind the cooker or less than 200 mm away from its sides.

• Any hoods must be installed according to the instructions listed in the relevant operating manual.

Levelling

If it is necessary to level the appliance, screw the adjustable feet into the places provided on each corner of the base of the cooker (see  gure).

The legs* fit into the slots on the underside of the base of the cooker.

Electrical connection

Install a standardised plug corresponding to the load indicated on the appliance data plate (see Technical data table). The appliance must be directly connected to the mains using an omnipolar circuit-breaker with a minimum contact opening of 3 mm installed between the appliance and the mains. The circuit-breaker must be suitable for the charge indicated and must comply with NFC 15-100 regulations (the earthing wire must not be interrupted by the circuit-breaker). The supply cable must be positioned so that it does not come into contact with temperatures higher than 50°C at any point.

Before connecting the appliance to the power supply, make sure that:

• The appliance is earthed and the plug is compliant with the law.

• The socket can withstand the maximum power of the appliance, which is indicated by the data plate.

HOOD

420

Min.

min.

650

mm. with hood

min.

700

mm. without hood

mm.

600

Min. mm.

420

Min. mm.

• The voltage is in the range between the values indicated on the data plate.

• The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it. Do not use extension cords or multiple sockets.

! Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced

by authorised technicians only.

! The manufacturer declines any liability should these safety measures not be observed.

Gas connection

Connection to the gas network or to the gas cylinder may be carried out using a flexible rubber or steel hose, in accordance with current national legislation and after making sure that the appliance is suited to the type of gas with which it will be supplied (see the rating sticker on the cover: if this is not the case see below). When using liquid gas from a cylinder, install a pressure regulator which complies with current national regulations. To make connection easier, the gas supply may be turned sideways*: reverse the position of the hose holder with that of the cap and replace the gasket that is supplied with the appliance.

! Check that the pressure of the gas supply is consistent with the values indicated in the Table of burner and nozzle specifications (see below). This will ensure the safe operation and durability of your appliance while maintaining efficient energy consumption.

Gas connection using a flexible rubber hose

Make sure that the hose complies with current national legislation. The internal diameter of the hose must measure: 8 mm for liquid gas supply; 13 mm for methane gas supply.

Once the connection has been performed, make sure that the hose:

• Does not come into contact with any parts that reach temperatures of over 50°C.

• Is not subject to any pulling or twisting forces and that it is not kinked or bent.

• Does not come into contact with blades, sharp corners or moving parts and that it is not compressed.

• Is easy to inspect along its whole length so that its condition may be checked.

• Is shorter than 1500 mm.

• Fits firmly into place at both ends, where it will be fixed using clamps that comply with current regulations.

! If one or more of these conditions is not fulfilled or if the cooker must be installed according to the conditions listed for class 2 - subclass 1 appliances (installed between two cupboards), the flexible steel hose must be used instead (see below).

Connecting a flexible jointless stainless steel pipe to a threaded attachment

Make sure that the hose and gaskets comply with current national legislation. To begin using the hose, remove the hose holder on the appliance (the gas supply inlet on the appliance is a cylindrical threaded 1/2 gas male attachment).

! Perform the connection in such a way that the hose length does not exceed a maximum of 2 metres, making sure that the hose is not compressed and does not come into contact with moving parts.

Checking the tightness of the connection

When the installation process is complete, check the hose fittings for leaks using a soapy solution. Never use a flame.

Adapting to different types of gas

It is possible to adapt the appliance to a type of gas other than the default type (this is indicated on the rating label on the cover).

Adapting the hob

Replacing the nozzles for the hob burners:

1. Remove the hob grids and slide the burners off their

seats.

2. Unscrew the nozzles using a 7 mm socket spanner (see  gure), and replace them with nozzles suited to the new type of gas (see Burner and nozzle speci cations table).

3. Replace all the components by following the above

instructions in reverse.

Adjusting the hob burners’ minimum setting:

1. Turn the tap to the minimum position.

2. Remove the knob and adjust the regulatory screw, which is positioned inside or next to the tap pin, until the flame is small but steady. ! If the appliance is connected to a liquid gas supply, the regulatory screw must be fastened as tightly as possible.

3. While the burner is alight, quickly change the position of the knob from minimum to maximum and vice versa several times, checking that the flame is not extinguished.

! The hob burners do not require primary air adjustment.

! After adjusting the appliance so it may be used with a different type of gas, replace the old rating label with a new one that corresponds to the new type of gas (these labels are available from Authorised Technical Assistance Centres).

! Should the gas pressure used be different (or vary slightly) from the recommended pressure, a suitable pressure regulator must be fitted to the inlet hose in accordance with current national regulations relating to “regulators for channelled gas”.

Safety Chain

! In order to prevent accidental tipping of the appliance, for example by a child climbing onto the oven door, the supplied safety chain MUST be installed!

The cooker is fitted with a safety chain to be fixed by means of a screw (not supplied with the cooker) to the wall behind the appliance, at the same height as the chain is attached to the appliance.

Choose the screw and the screw anchor according to the type of material of the wall behind the appliance. If the head of the screw has a diameter smaller than 9mm, a washer should be used. Concrete wall requires the screw of at least 8mm of diameter, and 60mm of length. Ensure that the chain is fixed to the rear wall of the cooker and to the wall, as shown in figure, so that after installation it is tensioned and parallel to the

ground level.

Replacing the Triple ring burner nozzles

1. Remove the pan supports and lift the burners out of their housing. The burner consists of two separate parts (see pictures).

2. Unscrew the nozzles using a 7 mm socket spanner. Replace the nozzles with models that are configured for use with the new type of gas (see Table 1). The two nozzles have the same hole diameter.

3. Replace all the components by completing the above operations in reverse order.

• Adjusting the burners’ primary air :

Does not require adjusting.

• Setting the burners to minimum:

1. Turn the tap to the low flame position.

2. Remove the knob and adjust the adjustment screw, which is positioned in or next to the tap pin, until the flame is small but steady.

setting, while the burner is alight, quickly change

the position of the knob from minimum to maximum and vice versa several times, checking that the flame does not go out. (thermocouple) fitted. If the device fails to work

when the burners are set to the low flame setting, increase this low flame setting using the adjusting screw. seals on the by-passes using sealing wax

! Should the gas pressure used be different (or vary slightly) from the recommended pressure, a suitable

pressure regulator must be fitted to the inlet pipe (in order to comply with current national regulations).

5. Once the adjustment has been made, replace the

! If the appliance is connected to liquid gas, the regulation screw must be fastened as tightly as possible.

! Once this procedure is finished, replace the old rating sticker with one indicating the new type of gas used. Stickers are available from any of our Service Centres.

ground level.

Only available in certain models.

TABLE OF CHARACTERISTSICS

Dimensions

Volume

(with drawn guide rails)

Dimensions of the lower compartment

width 42 cm height 23 cm depth 44 cm

Burners

may be adapted for use with any type of gas shown on the data plate, which is located inside the flap or, after the oven compartment has been opened, on the left-hand wall inside the oven.

Voltage and frequency

see data plate

ENERGY LABEL

Directive 2002/40/EC on the label of electric ovens. Standard EN 50304

Energy consumption for Natural convection – heating mode: Convection;

Declared energy consumption for Forced convection Class – heating mode: Baking

This appliance conforms to the

following European Economic Community directives: 2006/95/EC dated 12/12/06 (Low Voltage) and subsequent amendments 2004/108/EC dated 15/12/04 (Electromagnetic Compatibility) and subsequent amendments - 93/68/EEC dated 22/07/93 and subsequent amendments. 2002/96/EC 2009/142 of 30/11/09 (Gas) 1275/2008 (Stand-by/ Off mode)

Data plate, is located inside the flap or, after the oven compartment has been opened, on the left-hand wall inside the oven.

Table of burner and nozzle specifications

Table 1 G30 (GPB-B) G20 (GZ50) G2.350 (GZ35)

Burner Diameter

(mm)

Thermal

power

(p.c.s.*)

Thermal

power

(p.c.s.*)

By-pass

1/100

Nozzle

1/100

Flow*

g/h

Thermal

power

(p.c.s.*)

Nozzle

1/100

Flow*

l/h

Thermal

power

(p.c.s.*)

Nozzle

1/100

Flow*

l/h

Reduc. Nominal (mm) (mm) Nominal (mm) Nominal (mm)

Fast (Large)(R) 100 0,70 3,40 41 87 247 3,00 128 286 3,00 158 397 Semi Fast

(Medium) (S)

75 0,40 2,20 30 70 160 1,90 104 181 1,9 143 X 251

Auxiliary (Small) (A)

51 0,40 1,30 30 52 95 1,00 76 95 1,00 106 132

Supply Pressures

Minimum (mbar)

Nominal (mbar)

Maximum (mbar)

29 37 44

16 20 25

10 13 16

( )

Tripple

Crown (TC)

130 3.25 1.5 63

2x65

G2.350 (GZ35) p.c.s. 27.20 MJ/m

* A 15°C e 1013 mbar-dry gas

G20 (GZ50) p.c.s. 37,78 MJ/m G30 (GPB-B) p.c.s. 49,47 MJ/Kg

262 3,25

2x99 309

I5TMH6AG U

I5GMH6AG.1 U I5GMH6AG U I5TMH5AG.1 U

I5GMH2AG U

60l

I5GMH5AG U

I5GMHA U

I5GMH1A U

I5GMH5AG U

I5GMH6AG U

57l

I5TMH6AG U

I5GMH6AG.1 U I5GMH6AG U

I5TMH5AG.1 U

I5GMH2AG U

I5GMH5AG U

I5GMHA U I5GMH1A U

I5GMH5AG U I5GMH6AG U

340

410

424

391

340

424

width height depth

mm mm

width height depth

Start-up and use

Using the hob

Lighting the burners

For each BURNER knob there is a full ring showing the strength of the flame for the relevant burner. To light one of the burners on the hob:

1. Bring a flame or gas lighter close to the burner.

2. Press the BURNER knob and turn it in an anticlockwise direction so that it is pointing to the maximum flame setting .

3. Adjust the intensity of the flame to the desired level by turning the BURNER knob in an anticlockwise direction. This may be the minimum setting , the maximum setting  or any position in between the two.

If the appliance is fitted with an electronic lighting

device* (C), press the BURNER knob and turn it in an anticlockwise direction, towards the minimum flame setting, until the burner is lit. The burner may be extinguished when the knob

is released. If this occurs, repeat the operation, holding the knob down for a longer period of time. f the appliance is equipped with a flame failure safety device (X), press and hold the BURNER knob for approximately 3-7 seconds to keep the flame alight and to activate the device.

! If the flame is accidentally extinguished, switch off the burner and wait for at least 1 minute before attempting to relight it.

To switch the burner off, turn the knob until it reaches the stop position •.

Practical advice on using the burners

For the burners to work in the most efficient way possible and to save on the amount of gas consumed, it is recommended that only pans that have a lid and a flat base are used. They should also be suited to the size of the burner:

To identify the type of burner, please refer to the diagrams contained in the “Burner and nozzle specifications”.

Using the oven

! The first time you use your appliance, heat the empty oven with its door closed at its maximum temperature for at least half an hour. Ensure that the room is well ventilated before switching the oven off and opening the oven door. The appliance may emit a slightly unpleasant odour caused by protective substances used during the manufacturing process burning away.

! Before operating the product, remove all plastic film from the sides of the appliance.

! Never put objects directly on the bottom of the oven; this will avoid the enamel coating being damaged.

! Should the appliance be equipped with an electronic programmer*, to use the electric oven, just press buttons

and at the same time (the symbol will appear on the display) before selecting the desired cooking function.

1. Select the desired cooking mode by turning the SELECTOR knob.

2. Select the recommended temperature for the cooking mode or the desired temperature by turning the THERMOSTAT knob. A list detailing cooking modes and suggested cooking temperatures can be found in the relevant table (see Oven cooking advice table).

During cooking it is always possible to:

• Change the cooking mode by turning the

SELECTOR knob.

• Change the temperature by turning the

THERMOSTAT knob.

Only available in certain models.

Burner ř Cookware diameter (cm)

Fast (R) 24 - 26

Semi Fast (S) 16 - 20 Auxiliary (A) 10 - 14

(TC)

results are achieved when preparing veal or beefbased dishes as well (braised meats, stew, goulash, wild game, ham etc.) which need to cook slowly and require basting or the addition of liquid. It nonetheless remains the best system for baking cakes as well as

fruit and cooking using covered casserole dishes for oven baking. When cooking in convection mode, only use one dripping pan or cooking rack at a time, otherwise the heat distribution will be uneven. Using the different rack heights available, you can balance the amount of heat between the top and the bottom of the oven. Select from among the various rack heights based on whether the dish needs more or less heat from the top.

FAN ASSISTED mode Temperature: any temperature between 50°C and Max. The heating elements, as well as the fan, will come on. Since the heat remains constant and uniform throughout the oven, the air cooks and browns food uniformly over its entire surface. With this mode, you can also cook various dishes at the same time, as long as their respective cooking temperatures are the same. A maximum of 2 racks can be used at the same time, following the instructions in the section entitled: “Cooking On More Than One Rack”. This fan assisted mode is particularly recommended for dishes requiring a gratin finish or for those requiring considerably prolonged cooking times, such as for example: lasagne, pasta bakes, roast chicken and potatoes, etc… Moreover, the excellent heat distribution makes it possible to use lower temperatures when cooking roasts. This results in less loss of juices, meat which is more tender and a decrease in the loss of weight for the roast. The fan assisted mode is especially suited for cooking fish, which can be prepared with the addition of a limited amount of condiments, thus maintaining their flavour and appearance. Desserts: the fan assisted mode is also perfect for baking leavened cakes. Moreover, this mode can also be used to thaw quickly white or red meat and bread by setting the temperature to 80 °C. To thaw more delicate foods, set the thermostat to 60°C or use only the cold air circulation feature by setting the thermostat to 0°C.

• Stop cooking by turning the SELECTOR knob to the “0” position.

! Always place cookware on the rack(s) provided.

THERMOSTAT indicator light

When this is illuminated, the oven is generating heat. It switches off when the inside of the oven reaches the selected temperature. At this point the light illuminates and switches off alternately, indicating that the thermostat is working and is maintaining the temperature at a constant level.

Oven light

This is switched on by turning the SELECTOR knob to any position other than “0”. It remains lit as long as the

oven is operating. By selecting



with the knob, the

light is switched on without any of the heating elements being activated.

Timer*

To activate the Timer proceed as follows:

1. Turn the TIMER knob in a clockwise direction  for

almost one complete revolution to set the buzzer.

2. Turn the TIMER knob in an anticlockwise direction



to set the desired length of time.

Cooking modes

BAKING mode Temperature: any temperature between 50°C and Max. The rear heating element and the fan come on, guaranteeing delicate heat distributed uniformly throughout the oven. This mode is ideal for baking and cooking delicate foods - especially cakes that need to rise - and for the preparation of certain tartlets on 3 shelves at the same

time. Here are a few examples: cream puffs, sweet and savoury biscuits, savoury puffs, Swiss rolls and small

portions of vegetables au gratin, etc…..

CONVECTION mode

Temperature: any temperature between 50°C and Max. On this setting, the top and bottom heating elements

come on. This is the classic, traditional type of oven which has been perfected, with exceptional heat distribution and reduced energy consumption. The convection oven is still unequalled when it comes to cooking dishes made up of several ingredients, e.g. cabbage with ribs, Spanish style cod, Ancona style stockfish, tender veal strips with rice, etc. Excellent

PIZZA

modemode

mode

The circular heating elements and the elements at the bottom of the oven are switched on and the fan is activated. This combination heats the oven rapidly by

VEN VEN

VEN

OPOP

mode

The central part of the top heating element is switched on. The high and direct temperature of the grill is recommended for food that requires a high surface temperature (veal and beef steaks, fillet steak and entrecôte). This cooking mode uses a limited amount of energy and is ideal for grilling small dishes. Place the food in the centre of the rack, as it will not be cooked properly if it is placed in the corners.

Only available in certain models.

DOUBLE GRILL mode

The top heating element and the rotisserie spit will be activated. This provides a larger grill than the normal grill setting and has an innovative design that improves cooking efficiency by 50% and eliminates the cooler corner areas. Use this grilling mode to achieve a uniform browning on top of the food.

F FAN

ASSISTED DOUBLE GRILL mode

The top heating element and the turnspit are activated and the fan begins to operate. This combination of features increases the effectiveness of the unidirectional thermal radiation of the heating elements through forced circulation of the air throughout the oven. This prevents the food from burning on top by enabling heat to penetrate into the food more effectively; it is therefore an ideal way of cooking food quickly under the grill or for grilling large pieces of meat without having to use the turnspit.

! The GRILL, DOUBLE GRILL and FAN-ASSISTED DOUBLE GRILL cooking modes must be performed with the oven door shut.

! When using the GRILL and DOUBLE GRILL cooking modes, place the rack in position 5 and the dripping pan in position 1 to collect cooking residues (fat and/or grease). When using the FAN-ASSISTED DOUBLE GRILL cooking mode, place the rack in position 2 or 3 and the dripping pan in position 1 to collect cooking residues.

DEFROSTING mode

The fan located on the bottom of the oven makes the air circulate at room temperature around the food. This is recommended for the defrosting of all types of food, but in

particular for delicate types of food which do not require heat, such as for example: ice cream cakes, cream or custard desserts, fruit cakes. By using the fan, the defrosting time is approximately halved. In the case of

meat, fish and bread, it is possible to accelerate the

process using the “multi-cooking” mode and setting

the temperature to 80° - 100°C.

BOTTOM VENTILATED mode

The bottom heating element and the fan is activated, which allows for the heat distribution within the whole cavity of the oven. This combination is useful for light cooking of vegetables and fish.

BOTTOM mode BOTTOM mode

The lower heating element is activated. This position is recommended for perfecting the cooking of dishes (in baking trays) which are already cooked on the surface but require further cooking in the centre, or for desserts with a covering of fruit or jam, which only require moderate colouring on the surface. It should be noted that this function does not allow the maximum temperature to be reached inside the oven (250°C) and it is therefore not recommended that foods are cooked using only this setting, unless you are baking cakes (which should be baked at a temperature of 180°C or lower).

Practical cooking advice

Cooking on several shelves simultaneously

If it is necessary to use two racks, use the FAN ASSITED mode , as this is the only cooking mode suited to this type of cooking. We also recommend that:

• Positions 1 and 5 are not used. This is because excessive direct heat can burn temperature sensitive foods.

• Positions 2 and 4 are used and that food that requires more heat is placed on the rack in position

• When cooking foods that require different cooking times and temperatures, set a temperature that is halfway between the two recommended

temperatures (see Oven cooking advice table) and place the more delicate food on the rack in position

4. Remove the food that requires a shorter cooking time first.

• When cooking pizzas on several racks with the temperature set to 220°C, the oven is preheated for 15 minutes. Generally speaking, cooking on the rack in position 4 takes longer: we recommend that the pizza cooked on the lowest rack position is removed first, followed by the pizza cooked in position 4 a few minutes later.

• Place the dripping pan on the bottom and the rack on top.

producing a considerable amount of heat, particularly from the element at the bottom. If you use more than one rack at a time, switch the position of the dishes halfway through the cooking process.

Only available in certain models.

Lower oven compartment*

There is a compartment underneath the oven that may be used to storeoven accessories or deep dishes. To open the door pull it downwards (see  gure).

! Do not place flammable materials in the lower oven compartment.

! The internal surfaces of the compartment (where present) may become hot.

WARNING! The oven is provided with a stop system to extract the racks and prevent them from coming out of the oven.(1) As shown in the drawing, to extract them completely, simply lift the racks, holding them on the front

part, and pull (2).

Rotisserie

To operate the rotisserie (see diagram) proceed as follows:

1. Place the dripping pan in position 1.

2. Place the rotisserie support in position 4 and insert the spit in the hole provided on the back panel of the oven.

3. Activate the rotisserie by selecting

with the

SELECTOR knob.

Only available in certain models.

Timer feature

This function may be accessed by pressing the  button, after which the display will show the symbol

. Every time the + button is pressed it corresponds to a time increase of 10 seconds, until it reaches 99 minutes and 50 seconds. After this point, each press of the button represents an increase of one minute, up to a maximum of 10 hours. Pressing the - button reduces the time. After the time period has been set, the timer will begin to count down. When the timer reaches zero, the buzzer will sound (this may be stopped by pressing any button).

The time may be displayed by pressing the



button,

and the  symbol indicates that the timer function has been set. After approximately 7 seconds, the display will automatically revert to the timer.

Cancelling a time that has already been set

Press the - button until the display shows 0:00.

Adjusting the buzzer volume

After selecting and confirming the clock settings, use the - button to adjust the volume of the alarm buzzer.

Planning cooking with the electronic programmer*

Setting the clock

After the appliance has been connected to the power supply, or after a blackout, the display will automatically reset to 0:00 and begin to blink. To set the time:

1. Press the COOKING TIME button

and the

COOKING END TIME simultaneously.

2. Within 4 seconds of having pressed these buttons, set the exact time by pressing the + and - buttons. The + button advances the hours and the



- button decreases the hours. Once the time has been set, the programmer automatically switches to manual mode.

Setting the timer

The timer enables a countdown to be set, when the time has elapsed a buzzer sounds. To set the timer proceed as follows:

1. press the TIMER button

. The display shows:

.

2. Press the + and - buttons to set the desired time.

3. When the buttons are released the timer begins

Electronic timer*

This function displays the time and works as a timer which counts down to zero. ! All functions will be implemented approximately 7 seconds after they have been set.

Resetting the clock

After the appliance has been connected to the power supply, or after a power cut, the clock display will begin to blink, showing the figure: 0:00

• Press button



and then buttons - and + to set the exact time. Press and hold the buttons to quicken the count upwards.

Any necessary modifications can be made by repeating the above process.

counting down and the current time appears on the display.



4. After the time has elapsed a buzzer will sound, and this can be switched off by pressing any button (except

the + and - buttons). The symbol

will switch off.

! The timer does not switch the oven on or off.

Adjusting the volume of the buzzer

After selecting and confirming the clock settings, use the - button to adjust the volume of the alarm buzzer.

Setting the cooking time with a delayed start

First decide which cooking mode you wish to use and set a suitable temperature using the SELECTOR and THERMOSTAT knobs on the oven. At this point it is possible to set the cooking time:

1. Press the COOKING TIME button

2. Within 4 seconds of having pressed this button, set the desired amount of time by pressing the + and buttons. If, for example, you wish to set a cooking time of 30 minutes, the display will show:



3. 4 seconds after the buttons are released, the current time (for example 10.00) reappears on the display with the symbol



and the letter A (AUTO).

Next the desired cooking end time must be set:

4. Press the END COOKING TIME button

5. Within 4 seconds of having pressed this button, adjust the cooking end time by pressing the + and buttons. If, for example, you want cooking to end at

13.00, the display shows:



6. 4 seconds after the buttons are released, the current time (for example 10.00) reappears on the display with the letter A (AUTO).



At this point, the oven is programmed to switch on automatically at 12:30 and switch off after 30 minutes, at 13.00.

Setting the cooking time with an immediate start

Follow the above procedure for setting the cooking time (points 1-3).

! When the letter A appears, this indicates that both the cooking time and the end cooking time have been programmed in AUTO mode. To restore the oven to manual operation, after each AUTO cooking mode

press the COOKING TIME

and END COOKING

TIME buttons simultaneously.

! The symbol



will remain lit, along with the oven, for

the entire duration of the cooking programme.

The set cooking duration can be displayed at any time by pressing the COOKING TIME button

, and the

cooking end time may be displayed by pressing the

END COOKING TIME button . When the cooking time has elapsed a buzzer sounds. To stop it, press any button apart from the + and - buttons.

Cancelling a previously set cooking programme

Press the COOKING TIME button

and the

COOKING END TIME simultaneously.

Correcting or cancelling previously set data

The data entered can be changed at any time by pressing the corresponding button (TIMER, COOKING TIME or COOKING END TIME) and the + or - button. When the cooking time data is cancelled, the cooking end time data is also cancelled automatically, and vice

versa. If the oven has already been programmed, it will not accept cooking end times which are before the start of the programmed cooking process.

End-cooking Timer *

1. To set the buzzer, turn the COOKING TIMER knob clockwise almost one complete revolution.

2. Turn the knob anticlockwise to set the desired time: align the minutes shown on the COOKING TIMER knob with the indicator on the control panel.

3. When the selected time has elapsed, a buzzer sounds and the oven turns off.

4. When the oven is off the cooking timer can be used as a normal timer.

! To use the oven manually, in other words when you do not wish to use the end of cooking timer, turn the COOKING TIMER knob until it reaches the  symbol.

Only available in certain models.

Oven cooking advice table

Selector knob setting

Food to be cooked Weight

(in kg)

Cooking rack position from

bottom

Preheating time

(minutes)

Thermostat

knob

setting

Cooking

time

(minutes)

Baking

Tarts Fruit cakes Plum cake Sponge cake Stuffed pancakes (on 2 racks) Small cakes (on 2 racks) Cheese puffs (on 2 racks) Cream puffs (on 3 racks) Biscuits (on 3 racks) Meringues (on 3 racks)

0.5 1

0.7

0.5

1.2

0.6

0.4

0.7

0.5

2/3

3 3

2-4

2-4 2-4

1-3-5 1-3-5 1-3-5

15 15 15 15 15

15 15

15 15 15

180 180 180 160 200

190 210

180 180

20-30 40-45 40-50 25-30 30-35

20-25 15-20

20-25 20-25

180

Convection

Duck Roast veal or beef Pork roast Biscuits (short pastry)

Tarts

1 1 1

3 3 3 3 3

15 15 15 15 15

200 200 200 180 180

65-75 70-75 70-80 15-20 30-35

Fan assisted

Pizza (on 2 racks) Lasagne Lamb Roast chicken + potatoes Mackerel Plum-cake Cream puffs (on 2 racks) Biscuits (on 2 racks) Sponge cake (on 1 rack) Sponge cake (on 2 racks) Savoury pies

1 1 1 1 1 1

0.5

1.0

1.5

2-4

3 2

2-4

2 2-4 2-4

2 2-4

15 10 10 10 10 10 10 10 10 10

220 200 180 180 180 170 190 180 170 170

200

15-20 30-35 50-60 60-75 30-35 40-50 20-25 10-15 15-20 20-25

25-30

Top Oven

Browning food to perfect cooking

- 3/4 15 220 -

Grill

Soles and cuttlefish Squid and prawn kebabs Cod filet Grilled vegetables

Veal steak Cutlets Hamburgers Mackerels

Toasted sandwiches

1 1 1 1 1 1 1

n.° 4

4 4

3/4

4 4 4 4 4

5 5 5 5 5 5 5 5

Max

Max Max Max Max Max Max Max Max

8-10

6-8

10 10-15 15-20 15-20

7-10

15-20

2-3

Fan assisted grill

Grilled chicken Cuttlefish

1.5

3 3

5 5

200 200

55-60 30-35

cooking times are approximate and may vary according to personal taste. When cooking using the grill or fan

assisted grill, the dripping pan must always be placed on the 1st oven rack from the bottom.

Bottom

Ventilated

Bream

Cod sh  llet

Sea bass in foil Mixed vegetables (Ratatouille type)

Well-done vegetables

0.5

0.8 – 1,0 1,5 – 2,0

3 3 3 3

18 16 24 21

170-180 160-170 200-210 190 -200

180 - 190

25-35 15-20 35-45

50 - 60

55 - 60

Bottom Mode

For perfectioning cooking

Precautions and tips

! This appliance has been designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully.

General safety

• The appliance was designed for domestic use inside the home and is not intended for commercial or industrial use.

• The appliance must not be installed outdoors, even in covered areas. It is extremely dangerous to leave the appliance exposed to rain and storms.

• Do not touch the appliance with bare feet or with wet or damp hands and feet.

• The appliance must be used by adults only for the preparation of food, in accordance with the instructions provided in this booklet.

• The instruction booklet accompanies a class 1 (insulated) or class 2 - subclass 1 (recessed between 2 cupboards) appliance.

• Keep children away from the oven.

• Make sure that the power supply cables of other electrical appliances do not come into contact with the hot parts of the oven.

• The openings used for the ventilation and dispersion of heat must never be covered.

• Always use oven gloves when placing cookware in the oven or when removing it.

• Do not use flammable liquids (alcohol, petrol, etc...) near the appliance while it is in use.

• Do not place flammable material in the lower storage compartment or in the oven itself. If the appliance is switched on accidentally, it could catch fire.

• Always make sure the knobs are in the “

•

” position

when the appliance is not in use.

• When unplugging the appliance, always pull the plug from the mains socket; do not pull on the cable.

• Never perform any cleaning or maintenance work without having disconnected the appliance from the electricity mains.

• If the appliance breaks down, under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or further malfunctioning of the appliance. Contact Assistance.

• Do not rest heavy objects on the open oven door.

•

The appliance should not be operated by people

(including children) with reduced physical, sensory or mental capacities, by inexperienced individuals or by anyone who is not familiar with the product. These individuals should, at the very least, be supervised by someone who assumes responsibility for their safety or receive preliminary instructions relating to the operation of the appliance.

WARNING! The glass lid can break in if it is heated up. Turn off all the burners and the electric plates before clos-

ing the lid

Disposal

• When disposing of packaging material: observe local legislation so that the packaging may be reused.

• The European Directive 2002/96/EC relating to Waste Electrical and Electronic Equipment (WEEE) states that household appliances should not be disposed of using the normal solid urban waste cycle. Exhausted appliances should be collected separately in order to optimise the cost of re-using and recycling the materials inside the machine, while preventing potential damage to the atmosphere and to public health. The crossed-out dustbin is marked on all products to remind the owner of their obligations regarding separated waste collection. For more information relating to the correct disposal of household appliances, owners should contact their local authorities or appliance dealer.

Respecting and conserving the environment

• You can help to reduce the peak load of the electricity supply network companies by using the oven in the hours between late afternoon and the early hours of the morning.

• Always keep the oven door closed when using the GRILL and FAN-ASSISTED GRILL mode cooking. This will achieve better results while saving energy (approximately 10%).

• Check the door seals regularly and wipe them clean to ensure they are free of debris so that they adhere properly to the door, thus avoiding heat dispersion.

If the cooker is placed on a pedestal, take the necessary precautions to prevent the cooker from sliding off the pedestal itself.

•

Switching the appliance off

Disconnect your appliance from the electricity supply before carrying out any work on it.

Cleaning the appliance

! Never use steam cleaners or pressure cleaners on the appliance.

• The stainless steel or enamel-coated external parts and the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and neutral soap. Use specialised products for the removal of stubborn stains. After cleaning, rinse well and dry thoroughly. Do not use abrasive powders or corrosive substances.

• The hob grids, burner caps, flame spreader rings and burners may be removed to make cleaning easier; wash them in hot water and non-abrasive detergent, making sure all burnt-on residue is removed before drying them thoroughly.

• For hobs with electronic ignition, the terminal part of the electronic lighting devices should be cleaned frequently and the gas outlet holes should be checked for blockages.

• The inside of the oven should ideally be cleaned after each use, while it is still lukewarm. Use hot water and detergent, then rinse well and dry with a soft cloth. Do not use abrasive products.

•

Clean the glass part of the oven door using a

sponge and a non-abrasive cleaning product, then dry thoroughly with a soft cloth. Do not use rough abrasive material or sharp metal scrapers as these could scratch the surface and cause the glass to crack.

• The accessories can be washed like everyday crockery, and are even dishwasher safe.

The cover*

If the cooker is fitted with a glass cover, this cover should be cleaned using lukewarm water. Do not use abrasive products. It is possible to remove the cover in order to make cleaning the area behind the hob easier. Open the cover fully and pull it upwards (see  gure).

! Do not close the cover when the burners are alight or when they are still hot.

! Remove any liquid from the lid before opening it.

Inspecting the oven seals

Check the door seals around the oven regularly. If the seals are damaged, please contact your nearest Authorised After-sales Service Centre. We recommend that the oven is not used until the seals have been replaced.

Replacing the oven light bulb

1. After disconnecting the oven from the electricity mains, remove the glass lid covering the lamp socket (see  gure).

2. Remove the light bulb and replace it with a similar one: voltage 230 V, wattage 25 W, cap E 14.

3. Replace the lid and reconnect the oven to the electricity supply.

Gas tap maintenance

Over time, the taps may become jammed or difficult to turn. If this occurs, the tap must be replaced.

! This procedure must be performed by a qualified technician who has been authorised by the manufacturer.

Assistance

Please have the following information to hand:

• The appliance model (Mod.).

• The serial number (S/N). This information can be found on the data plate located on the appliance and/or on the packaging.

Care and maintenance

Only available in certain models.

! Do not use the oven lamp as/for ambient lighting.

40°

Removing and fitting the oven door:

1.Open the door

2.Make the hinge clamps of the oven door rotate backwards completely (see photo)

3.Close the door until the clamps stop (the door will remain open for 40° approx.) (see photo)

4.Press the two buttons on the upper profile and

extract the profile (see photo)

5.Remove the glass sheet and do the cleaning as indicated in chapter: “Care and maintenance”.

6.Replace the glass.

WARNING! Oven must not be operated with inner door glass removed!

WARNING! When reassembling the inner door glass insert the glass panel correctly so that the text written on the panel is not reversed and

can be easily legible.

7.Replace the profile, a click will indicate that the part is positioned correctly.

8.Open the door completely.

9.Close the supports (see photo).

10.Now the door can be completely closed and the oven can be started for normal use.

Steam-Assisted Oven Cleaning

This method of cleaning is recommended especially after cooking very fatty (roasted)meats.

This cleaning process allows to facilitate the removal of dirt of the walls of the oven by the generation of steam that is created inside the oven cavity for easier cleaning.

! Important! Before you start steam -cleaning:

-Remove any food residue and grease from the bottom of the oven.

- Remove any oven accessories (grids and drip pans).

Perform the above operations according to the following procedure:

1. pour 300ml of water into the baking tray in the oven, placing it in the bottom shelf. In the models where the drip pan is not present, use a baking sheet and place it on the grill at the bottom shelf;

2. select the function of the oven and set the temperature to 100 ° C;

3. keep it in the oven for 15min;

4. turn off the oven;

5. Once cooled the oven, you can open the door to complete the cleaning with water and a damp cloth;

6. eliminate any residual water from the cavity after finishing cleaning

When the steam –cleaning is done, after cooking especially fatty foods, or when grease is difficult to remove, you may need to complete the cleaning with the traditional method, described in the previous paragraph.

! Perform cleaning only in the cold oven!

BOTTOM

Instalacja

! Przed przystàpieniem do u˝ytkowania urzàdzenia, nale˝y starannie zapoznaç si´ z podr´cznikiem u˝ytkownika. Zawiera on wa˝ne zalecenia dotyczàce bezpieczeƒstwa instalacji, obs∏ugi oraz konserwacji kuchenki. Podr´cznik nale˝y zachowaç do póêniejszego u˝ytku.

! Instrukcj´ nale˝y zachowaç na przysz∏oÊç. Instrukcja musi byç do∏àczona do urzàdzenia w przypadku sprzeda˝y, przekazywania innym osobom lub przeprowadzki.

! Poni˝sze instrukcje przeznaczone sà dla wykwalifikowanego specjalisty instalujàcego urzàdzenie. Instrukcje te majà na celu zapewnienie mo˝liwie najbardziej profesjonalnego i doÊwiadczonego wykonania czynnoÊci zwiàzanych z instalacjà i konserwacjà urzàdzenia.

! Wszelkie prace regulacyjne lub konserwacyjne nale˝y przeprowadzaç po od∏àczeniu kuchenki od zasilania.

Wentylacja pomieszczenia

Wymagania dla pomieszczeƒ kuchennych

Przed przystàpieniem do instalowania kuchni gazowej w pomieszczeniu kuchennym itp., nale˝y upewniç si´, czy spe∏nia ono stawiane mu wymagania. Podstawa prawna, w oparciu, o którà oceniamy przydatnoÊç pomieszczenia do zainstalowania w nim kuchni gazowej, jest Rozporzàdzenie Ministra Gospodarki Przestrzennej i Budownictwa z dnia 14 grudnia 1994 r. w sprawie warunków technicznych, jakim powinny odpowiadaç budynki i ich usytuowanie, b´dàce aktem wykonawczym do Prawa budowlanego (Dz.U. nr 75 z dnia 16-12-2002 poz. 690).

Wa˝ne: niniejsze urzàdzenie mo˝e byç instalowane i wykorzystywane wy∏àcznie w pomieszczeniach z trwa∏à wentylacjà, zgodnie z obowiàzujàcymi przepisami

Pomieszczenie powinno umo˝liwiaç dop∏yw powietrza, które niezb´dne jest do w∏aÊciwego spalania gazu. Dop∏yw powietrza powinien byç nie mniejszy ni˝ 2 m

/h na jeden kW mocy palników. Powietrze mo˝e byç dostarczane w wyniku bezpoÊredniego przep∏ywu z zewnàtrz przez kana∏ o przekroju, co najmniej 100 cm

, którego konstrukcja musi uniemo˝liwiaç przypadkowe zablokowanie (Rysunek A). Otwór ten nale˝y powi´kszyç o 100%, je˝eli instalacja kominowa nie zosta∏a wyposa˝ona w urzàdzenie bezpieczeƒstwa, wykrywajàce ogieƒ. Ewentualnie dop∏yw powietrza mo˝e odbywaç si´ poÊrednio z sàsiednich pomieszczeƒ, które wyposa˝one sà w kana∏y wentylacyjne wychodzàce na zewnàtrz, spe∏niajàce wymagania dla kana∏ów opisane powy˝ej. Wszystko to przy za∏o˝eniu, ˝e sàsiednie pomieszczenia nie sà pomieszczeniami wspólnymi, sypialniami ani nie wyst´puje w nich zagro˝enie po˝arowe (Rysunek B).

! JeÊli kuchnia jest wykorzystywana intensywnie I d∏ugo, to mo˝e okazaç si´ konieczne otworzenie okna dla poprawienia wentylacji.

Odprowadzanie spalin

Pomieszczenie, w którym ma byç zainstalowana kuchnia powinno byç wyposa˝one w system wentylacji odprowadzajàcy na zewnàtrz spaliny powstajàce podczas spalania. Instalacja ta powinna sk∏adaç si´ z okapu lub wentylatora elektrycznego, który w∏àcza si´ automatycznie za ka˝dym razem, gdy uruchamiana jest kuchnia.

! Gaz p∏ynny jest ci´˝szy od powietrza i w zwiàzku z tym ma tendencje do gromadzenia si´ na dolnych poziomach. Pokoje, w których zainstalowano butle z gazem p∏ynnym, powinny byç wyposa˝one w kana∏y wentylacyjne wyprowadzone z pomieszczenia na zewnàtrz, umo˝liwiajàce wydostawanie si´ gazu w przypadku nieszczelnoÊci. Z tego samego powodu butle z gazem, zarówno puste jak i cz´Êciowo nape∏nione, nie powinny byç ani instalowane, ani przechowywane w pomieszczeniach usytuowanych pod powierzchnià ziemi (piwnice, itp.). Dobrà praktykà jest przechowywanie w pomieszczeniu kuchennym jedynie tego zbiornika, który jest aktualnie wykorzystywany, pod warunkiem, ˝e nie znajduje si´ on zbyt blisko êróde∏ ciep∏a (piecyki, kominki, piekarniki, itp.), które mog∏yby zwi´kszyç temperatur´ we wn´trzu zbiornika powy˝ej 50°C.

Ustawianie i poziomowanie kuchni

Kuchnia gazowa pod wzgl´dem ochrony przed przegrzaniem otaczajàcych powierzchni jest przyrzàdem klasy X i jako taka mo˝e byç zabudowana w ciàgu meblowym tylko do wysokoÊci p∏yty roboczej tj. 850 mm od posadzki. Zabudowa powy˝ej tego poziomu jest zabroniona.

Rysunek A Przyk∏ady otworów wentylacyjnych

pomieszczenie sàsiednie

pomieszczenie, które ma byç wentylowane

Rysunek B Powi´kszenie szczeliny wentylacyjnej pomi´dzy oknem i pod∏ogà

komin lub rozga∏´ziony

kana∏ dymowy

bezpoÊrednio na zewnàtrz

(w przypadku kuchenek)

Uwaga: Kuchnia w klasie X nie mo˝e byç zabudowana wysokim meblem. Jednak w ka˝dym przypadku meble do zabudowy muszà mieç ok∏adzin´ oraz klej do jej przyklejenia odporny na temperatur´ 100°C. Niespe∏nienie tego warunku mo˝e spowodowaç zdeformowanie powierzchni lub odklejenia ok∏adziny. Je˝eli nie mamy pewnoÊci, co do odpornoÊci termicznej mebli, kuchni´ nale˝y zabudowaç meblami zachowujàc odst´p ok. 2 cm.

! Âciana znajdujàca si´ za kuchnià powinna byç uodporniona na wysokie temperatury. Podczas korzystania z kuchni, jej tylna Êciana mo˝e rozgrzaç si´ do temperatury oko∏o 90°C.

W∏aÊciwa instalacja kuchni wymaga uwzgl´dnienia poni˝szych kwestii:

• Kuchni´ mo˝na zainstalowaç w kuchni, kuchnio-jadalni lub pokoju spe∏niajàcym warunki techniczne wynikajàce z przytoczonych przepisów; nie wolno jej instalowaç w ∏azience ani w pomieszczeniu z prysznicem.

• Meble znajdujàce si´ obok kuchni, które wystajà powy˝ej powierzchni kuchni, powinny znajdowaç si´ w odleg∏oÊci, co najmniej 200 mm od kraw´dzi p∏yty z palnikami.

• Szafki sàsiadujàce z okapem powinny znajdowaç si´ w odleg∏oÊci, co najmniej 420 mm od powierzchni kuchni. Minimalna odleg∏oÊç nad poziomem palników, w jakiej mogà byç mocowane elementy umeblowania kuchni wykonane z materia∏ów niezabezpieczonych termicznie wynosi 700 mm.

• Nie stosowaç zas∏on z ty∏u kuchni i w odleg∏oÊci nie mniejszej ni˝ 200 mm od jej boków.

• Okapy nale˝y montowaç zgodnie z instrukcjami podanymi w do∏àczonych do nich instrukcjach obs∏ugi, ale nie ni˝ej ni˝ 650 mm.

Kuchnia ma nast´pujàcà technicznà specyfikacj´: Kat. II2ELs3B/P

Poziomowanie kuchni

Kuchenka wyposa˝ona jest w nó˝ki o zmiennej wysokoÊci umo˝liwiajàce odpowiednie wypoziomowanie urzàdzania. JeÊli jest to konieczne nale˝y wkr´ciç lub wykr´ciç nó˝ki znajdujàce si´ w naro˝nikach podstawy kuchenki a˝ do uzyskania w∏aÊciwego wypoziomowania.

Monta˝ nó˝ek (niektóre modele)

Przyrzàd do montowania nó˝ek w podstawie kuchni

Pod∏àczenie do instalacji elektrycznej

Kuchenki, które wyposa˝one sà w trójbiegunowy kabel zasilajàcy przystosowane sà do zasilania pràdem zmiennym o parametrach podanych na tabliczce znamionowej (umieszczonej we wn´ce pod piekarnikiem).

Uwaga: Do zasilania kuchni nie nale˝y stosowaç transformatorów, przejÊciówek ani boczników, gdy˝ mogà si´ one nadmiernie nagrzewaç lub zapaliç.

Na kablu zasilajàcym nale˝y zamontowaç standardowà wtyczk´, odpowiadajàcà maksymalnemu obcià˝eniu, które podano na tabliczce znamionowej. Ewentualnie, pod∏àczyç urzàdzenie bezpoÊrednio do instalacji elektrycznej. W tym przypadku nale˝y dodatkowo zamontowaç jednobiegunowy wy∏àcznik sieciowy o odleg∏oÊci styków, co najmniej 3 mm i odpowiadajàcy obowiàzujàcym przepisom bezpieczeƒstwa (przewód uziemiajàcy nie mo˝e byç roz∏àczany przez wy∏àcznik). Wy∏àcznik ten b´dzie odcina∏ kuchenk´ od zasilania. Kabel zasilajàcy powinien byç u∏o˝ony w taki sposób, aby temperatura w ˝adnym punkcie jego powierzchni nie mog∏a przekroczyç temperatury pokojowej powi´kszonej o 50°C.

Przed wykonaniem po∏àczenia nale˝y sprawdziç czy:

• Urzàdzenie posiada obwód ochronny i wtyczk´ zgodnà z obowiàzujàcymi przepisami.

• Bezpiecznik oraz instalacja elektryczna wytrzymajà obcià˝enie kuchenki.

• Instalacja elektryczna wyposa˝ona jest w skuteczny system uziemiajàcy spe∏niajàcy wymagania aktualnych standardów i przepisów.

! Wtyczka lub wy∏àcznik sieciowy muszà byç ∏atwo dost´pne po zainstalowaniu kuchenki.

! Przewód zasilajàcy nie mo˝e byç zagi´ty lub przygnieciony. ! Przewód zasilajàcy musi byç regularnie sprawdzany i w ra-

zie usterki wymieniony przez autoryzowanego technika.

! Producent nie ponosi ˝adnej odpowiedzialnoÊci za

ewentualne szkody wynik∏e z niew∏aÊciwego zainstalowania urzàdzenia.

Pod∏àczenie gazu do kuchni

Uwaga: CzynnoÊç ta mo˝e byç wykonana jedynie przez technika z odpowiednimi uprawnieniami, autoryzowanego przez producenta.

Pod∏àczyç kuchni´ do butli gazowej lub rury instalacji gazowej, przestrzegajàc obowiàzujàcych przepisów, wy∏àcznie po uprzednim ustaleniu, czy kuchnia mo˝e byç zasilana gazem wyst´pujàcym w danej instalacji. JeÊli jest inaczej, nale˝y wy-

HOOD

420

Min.

min.

650

mm. with hood

min.

700

mm. without hood

mm.

600

Min. mm.

420

Min. mm.

Klasa 2 podklasa 1

Klasa 1

konaç zalecania podane w cz´Êci „Dostosowywanie kuchenki do ró˝nych rodzajów gazów”. Niektóre modele kuchenki umo˝liwiajà pod∏àczenie instalacji gazowej z lewej lub prawej strony kuchenki – aby zmieniç stron´ zasilania nale˝y zamieniç po∏o˝enie uchwytu w´˝a i korka zamykajàcego oraz wymieniç uszczelk´ (do∏àczonà do kuchni). W przypadku pod∏àczenia do butli z gazem p∏ynnym nale˝y zastosowaç regulator ciÊnienia, spe∏niajàcy obowiàzujàce przepisy.

Wa˝ne: nale˝y sprawdziç czy ciÊnienie gazu w instalacji zgodne jest z zaleceniami podanymi w tabeli 1 zatytu∏owanej „Parametry dysz i palników”. Zapewni to bezpiecznà prac´ kuchni, w∏aÊciwe zu˝ycie gazu oraz przed∏u˝y czas bezawaryjnej pracy kuchni.

Pod∏àczenie do sztywnej instalacji rurowej (miedzianej lub stalowej)

Pod∏àczenie do instalacji gazowej powinno byç wykonane w taki sposób, który nie wywo∏uje napr´˝eƒ w ˝adnym punkcie instalacji ani na ˝adnej cz´Êci urzàdzenia. Urzàdzenie wyposa˝one jest w regulowanà z∏àczk´ w kszta∏cie litery “L” oraz uszczelk´, które umo˝liwiajà pod∏àczenie do instalacji gazowej. Je˝eli zajdzie potrzeba przekr´cenia z∏àczki to wymagana b´dzie równie˝ wymiana uszczelki (do∏àczonej do urzàdzenia). Z∏àcze doprowadzajàce gaz do kuchenki to m´ski cylinder z gwintem 1/2.

Pod∏àczenie do elastycznego przewodu metalowego

Z∏àcze doprowadzajàce gaz do kuchenki to z∏àcze m´skie z gwintem 1/2 do rur gazowych o przekroju okràg∏ym. Do pod∏àczenia nale˝y stosowaç wy∏àcznie rury i uszczelki odpowiadajàce aktualnie obowiàzujàcym normom. Maksymalna d∏ugoÊç przewodu elastycznego nie mo˝e przekraczaç 2000 mm. Po wykonaniu po∏àczenia nale˝y sprawdziç czy elastyczny przewód metalowy nie styka si´ z ˝adnymi cz´Êciami ruchomymi ani czy nie jest niczym przyciÊni´ty.

Pod∏àczenie w´˝em elastycznym

Kuchni´ gazowà pod∏àczamy w´˝em elastycznym tylko

w przypadku zasilania gazem p∏ynnym z butli gazowej. Do pod∏àczenia nale˝y zastosowaç wà˝ gazowy odpowiadajàcy wymaganiom okreÊlonym przez krajowe normy. JeÊli kuchenka zasilana jest gazem p∏ynnym nale˝y zastosowaç regulatory ciÊnienia, które spe∏niajà krajowe przepisy techniczne. Wewn´trzna Êrednica w´˝a powinna wynosiç:

• 8 mm, w przypadku zasilania gazem p∏ynnym Sprawdziç czy wà˝ jest ÊciÊle dopasowany na obu koƒcach. Do zamocowania w´˝a u˝yç standardowych zacisków, G∏ównymi postanowienia obowiàzujàcych norm technicznych przewidujà, ˝e:

• wà˝ nie powinien w ˝adnym punkcie stykaç si´ z „goràcy-

mi” elementami kuchenki;

• wà˝ nie powinien byç d∏u˝szy ni˝ 1,5 metra

• wà˝ nie powinien byç w ˝adnym miejscu zgi´ty ani naciàgni´ty, na ca∏ej swojej d∏ugoÊci nie powinien równie˝ posiadaç ciasnych zakr´tów ani zw´˝eƒ

• na ca∏ej swojej d∏ugoÊci wà˝ powinien byç dost´pny, tak, aby mo˝liwa by∏a kontrola jego zu˝ycia

• w przypadku wykrycia nieszczelnoÊci wà˝ powinien byç ca∏kowicie wymieniony; naprawianie nieszczelnego w´˝a jest zabronione

Sprawdzanie szczelnoÊci

Wa˝ne: Po zakoƒczeniu instalacji kuchenki nale˝y sprawdziç szczelnoÊç wszystkich po∏àczeƒ stosujàc do tego wod´ z myd∏em. Do sprawdzania szczelnoÊci nie wolno w ˝adnym wypadku stosowaç ognia!

Dostosowywanie kuchenki do ró˝nych rodzajów gazów

Aby dostosowaç kuchenk´ do gazu innego rodzaju, ni˝ rodzaj, dla którego zaprojektowano kuchenk´ (patrz naklejka na spodzie kuchenki lub na opakowaniu), nale˝y wymieniç dysze palników, zgodnie z poni˝szà procedurà:

1. Zdemontowaç krat´ podpierajàcà garnki i wysunàç palniki z kuchenki

2. Za pomocà klucza nasadowego 7mm odkr´ciç dysze i wymieniç je na nowe dysze, odpowiednie do gazu danego typu (patrz Tabela 1, „Parametry dysz i palników”).

3. Ponownie zmontowaç razem cz´Êci, wykonujàc wy˝ej opisane czynnoÊci w odwrotnej kolejnoÊci

Regulacja dop∏ywu powietrza do palnika

Palniki nie wymagajà takiej regulacji. Regulacja minimalnej wielkoÊci p∏omienia

1. Ustawiç zawór gazu w po∏o˝eniu najmniejszego p∏omienia

2. Zdemontowaç pokr´t∏o i przekr´ciç Êrub´ regulacyjnà (znajdujàcà si´ bàdê po jednej ze stron trzonka lub w jego Êrodku). Przekr´ciç Êrub´ w kierunku zgodnym z ruchem wskazówek zegara do po∏o˝enia, w którym p∏omieƒ b´dzie ma∏y i stabilny.

3. Sprawdziç czy p∏omieƒ nie gaÊnie podczas szybkiego

kr´cenia zaworem

4. W przypadku niew∏aÊciwego dzia∏ania kuchenek wypo-

sa˝onych w urzàdzenie zabezpieczajàce (termoelement) przy ustawieniu najmniejszego p∏omienia, nale˝y zwi´kszyç wielkoÊç p∏omienia za pomocà Êruby.

W przypadku zasilania gazem p∏ynnym, Êruba regulacyj-

na powinna byç ca∏kowicie wkr´cona do samego koƒca.

Po zakoƒczonej regulacji, nale˝y zmieniç nalepk´ z opi-

sem rodzaju gazu, do jakiego kuchnia jest przystosowana.

JeÊli ciÊnienie gazu w instalacji ró˝ni si´ od wartoÊci, podanych w niniejszej instrukcji, nale˝y zastosowaç regulator ciÊnienia.

GORĄCA

POWIERZCHNIA

Kurek zamykający

Położenie węża

Punkt przyłączenia

* Dost´pne w niektórych modelach.

:\PLDQDG\V]ZSDOQLNX3RWUoMQD.RURQD

=GHPRQWXMUXV]W\LZ\VXÇSDOQLN]S¦\W\3DOQLN VN¦DGDVL¿]RGU¿EQ\FKF]¿ÑFLSDWU]U\VXQHN SRQLÝHM  =D SRPRFºVSHFMDOQHJRNOXF]D QDVDGRZHJR PP Z\NU¿²G\V]H:\PLHÇG\V]HQDQRZHRGSRZLHGQLH GODJD]XQRZHJRW\SXSDWU]7DEHOD2ELHG\V]H PDMºRWZRU\RMHGQDNRZHMÑUHGQLF\ =¦oÝSDOQLN]SRZURWHPZ\NRQXMºFSRZ\ÝV]H F]\QQRÑFLZ RGZUoFRQHMNROHMQRÑFL

5HJXODFMDSRZLHWU]DSLHUZRWQHJRSDOQLNQLH Z\PDJDUHJXODFML SRZLHWU]D

5HJXODFMDPLQLPDOQHMZLHONRÒFLS¦RPLHQLD

8VWDZ]DZoUJD]XZSR]\FMLQDMPQLHMV]HJR S¦RPLHQLD

=GHPRQWXMSRNU¿W¦RL SU]HNU¿FDM ÑUXE¿UHJXODF\MQº ]QDMGXMºFºVL¿SRMHGQHM]HVWURQWU]RQNDOXEZMHJR ÑURGNXDÝGRPRPHQWXJG\S¦RPLHÇE¿G]LHPD¦\DOH UoZQ\ 3R]DNRÇF]HQLXUHJXODFMLSU]\]DSDORQ\PSDOQLNX SU]HVWDZNLONXNURWQLHV]\ENLPUXFKHPSRNU¿W¦R]SR]\FML PLQLPXPGR PDNVLPXPL RGZURWQLH VSUDZG]DMºF F]\

S¦RPLHÇQLH JDÑQLH 1LHNWoUHPRGHOHNXFKQLZ\SRVDÝRQHVºZXU]ºG]HQLD ]DEH]SLHF]DMºFHWHUPRSDU\-HÝHOL]DEH]SLHF]HQLHQLH E¿G]LHG]LD¦D² QDPLQLPDOQ\P XVWDZLHQLX SDOQLND ]ZL¿NV]S¦RPLHÇSU]HNU¿FDMºF ÑUXE¿ UHJXODF\MQº 3R]DNRÇF]HQLXUHJXODFMLQDOHÝ\Z\PLHQL²XV]F]HONL QDSU]HZRGDFKLXV]F]HOQL²

+ 58 hidden pages

Indesit I5TMH6AG U, I5GMH6AG, I5TMH5AG.1 U, I5GMH2AG U, I5GMH5AG U Operating Instructions Manual

Specifications and Main Features

Frequently Asked Questions

User Manual