INDESIT FIS 53 K C.A (BK) User Manual
FIS 53 K C.A (BK)
FIS 53 K C.A IX
English
Operating Instructions
OVEN
Operating Instructions,1
Warnings,2
Assistance,3
Description of the appliance,4
Description of the appliance,5
Installation,6
Start-up and use,8
Cooking modes,8
The electronic programmer,10
Precautions and tips,11
Maintenance and care,12
Français
Contents
Mode d’emploi
FOUR
Sommaire
Mode d’emploi,1
Avertissements,2
Assistance,3
Description de l’appareil,4
Description de l’appareil,5
Installation,13
Mise en marche et utilisation,15
Programmes,15
Le programmateur électronique,17
Précautions et conseils,18
Nettoyage et entretien,19
Warnings
Avertissements
WARNING: The appliance and its accessible parts
become hot during use. Care should be taken to
avoid touching heating elements. Children less than 8
years of age shall be kept away unless continuously
supervised. This appliance can be used by children
aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been
given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made
by children without supervision.
Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the oven door glass since they can
scratch the surface, which may result in shattering
of the glass.
Never use steam cleaners or pressure cleaners on
the appliance.
WARNING: Ensure that the appliance is switched
off before replacing the lamp to avoid the possibility
of electric shock.
ATTENTION : Cet appareil ainsi que ses parties
accessibles deviennent très chauds pendant leur
fonctionnement. Il faut faire attention à ne pas toucher
les éléments chauffants. Ne pas faire approcher les
enfants de moins de 8 ans à moins qu’ils ne soient
sous surveillance constante. Le présent appareil peut
être utilisé par des enfants de plus de 8 ans et par
des personnes présentant des capacités physiques,
sensorielles ou mentales réduites ou n’ayant pas
l’expérience ou les connaissances indispensables,
à condition qu’ils soient sous bonne surveillance ou
qu’ils aient reçu les instructions nécessaires pour une
utilisation de l’appareil en toute sécurité et à condition
qu’ils se rendent compte des dangers encourus. Les
enfants ne doivent pas jouer avec l’appareil. Les
opérations de nettoyage et d’entretien ne doivent
pas être effectuées par des enfants non surveillés.
Ne pas utiliser de produits abrasifs ni de spatules
métalliques coupantes pour nettoyer la porte du
four en verre, sous peine d’éraer la surface et de
briser le verre.
Ne jamais nettoyer l’appareil avec des nettoyeurs
vapeur ou haute pression.
! When you place the rack inside, make sure that the
stop is directed upwards and in the back of the cavity.
2
ATTENTION : s’assurer que l’appareil est éteint
avant de procéder au remplacement de l’ampoule,
an d’éviter tout risque d’électrocution.
! Lors de l’introduction de la grille, s’assurer que
l’arrêt est bien tourné vers le haut et se trouve dans
la partie arrière de l’enceinte.
Assistance
! Never use the services of an unauthorised technician.
Please have the following information to hand:
• The type of problem encountered.
• The appliance model (Mod.).
• The serial number (S/N).
The latter two pieces of information can be found on the data plate located
on the appliance.
Assistance
! Ne jamais faire appel à des techniciens non agréés.
Lui indiquer :
• le type d’anomalie;
• le modèle de l’appareil (Mod.)
• son numéro de série (S/N)
Ces informations gurent sur la plaque signalétique apposée sur l’appareil
3
Description of the appliance
7
12345
Overall view
1 POSITION 1
2 POSITION 2
3 POSITION 3
4 POSITION 4
5 POSITION 5
6 GUIDES for the sliding racks
7 DRIPPING PAN
8 GRILL
9 Control panel
Description de l’appareil
Vue d’ensemble
1 NIVEAU 1
2 NIVEAU 2
3 NIVEAU 3
4 NIVEAU 4
5 NIVEAU 5
6 GLISSIERES de coulissement
7 Support LECHEFRITE
8 Support GRILLE
9 Tableau de bord
9 6
8
4
Description of the appliance
Control panel
1 SELECTOR knob
2 ELECTRONIC programmer
3 THERMOSTAT knob
4 THERMOSTAT indicator light
Description de l’appareil
Tableau de bord
1 Bouton PROGRAMMES
2 Programmateur ELECTRONIQUE
3 Bouton THERMOSTAT
4 Voyant THERMOSTAT
2 3 41
5
Installation
595 mm.
25 mm.
GB
! Please keep this instruction booklet in a safe place for future reference. If
the appliance is sold, given away or moved, please make sure the booklet is
also passed on to the new owners so that they may benet from the advice
contained within it.
! Please read this instruction manual carefully: it contains important information
concerning the safe operation, installation and maintenance of the appliance.
Positioning
! Do not let children play with the packaging material; it should be disposed
of in accordance with local separated waste collection standards (see
Precautions and tips).
Centring and xing
Secure the appliance to the cabinet by opening the oven door and inserting
4 screws into the 4 holes on the outer frame.
! The appliance must be installed by a qualied professional in accordance
with the instructions provided. Incorrect installation may damage property or
! All parts which ensure the safe operation of the appliance must not be
removable without the aid of a tool.
cause harm to people or animals.
Electrical connection
Built-in appliances
Use an appropriate cabinet to ensure that the appliance operates properly:
• The panels adjacent to the oven must be made of heat-resistant material.
• Cabinets with a veneer exterior must be assembled with glues which can
withstand temperatures of up to 100°C.
• To install the oven under the counter (see diagram) or in a kitchen unit,
the cabinet must have the following dimensions:
547 mm. min.
23 mm.
5 mm.
595 mm.
545 mm.
45 mm.
560 mm.
575-585 mm.
567 mm.
! The appliance must not come into contact with electrical parts once it has
been installed. The indications for consumption given on the data plate have
been calculated for this type of installation.
Ventilation
To ensure adequate ventilation, the back panel of the cabinet must be
removed. It is advisable to install the oven so that it rests on two strips of
wood, or on a completely at surface with an opening of at least 45 x 560
mm (see diagrams).
45 mm.
560 mm.
Ovens equipped with a three-pole power supply cable are designed to operate
with alternating current at the voltage and frequency indicated on the data
plate located on the appliance (see below).
Fitting the power supply cable
N
L
Connecting the supply cable to the mains
Install a standardised plug corresponding to the load indicated on the data
plate (see table).
The appliance must be directly connected to the mains using an omnipolar
switch with a minimum contact opening of 3 mm installed between the
appliance and the mains. The switch must be suitable for the charge indicated
and must comply with current electrical regulations (the earthing wire must not
be interrupted by the switch). The supply cable must be positioned so that it
does not come into contact with temperatures higher than 50°C at any point
(the back panel of the oven, for example).
1. Open the terminal board by
inserting a screwdriver into the side
tabs of the cover. Use the screwdriver
as a lever by pushing it down to open
the cover (see diagram).
2. Install the power supply cable by
loosening the cable clamp screw
and the three wire contact screws
L-N- .
Connect the wires to the
corresponding terminals: the Blue
N
wire to the terminal marked (N), the
Brown wire to the terminal marked
(L) and the Yellow/Green wire to the
terminal marked (see diagram).
L
3. Secure the cable by fastening the
clamp screw.
4. Close the cover of the terminal
board.
6
! The installer must ensure that the correct electrical connection has been
performed and that it is fully compliant with safety regulations.
Loading...