Indesit FIM 88 KGP.A GB Operating Instructions Manual

FIM 88 KGP.A IX GB FIM 88 KGP.A GB

OVEN

Contents

Installation, 2

Positioning

Electrical connection, 3

Description of the appliance, 4

Overall view Control panel Display

Start-up and use, 5

Setting the clock Setting the timer Starting the oven

Cooking modes, 6-8

Cooking modes Technical data Programming cooking Practical cooking advice Cooking advice table

Precautions and tips, 9

General safety Disposal Respecting and conserving the environment

Care and maintenance, 10-11

Switching the appliance off Cleaning the appliance Cleaning the oven door Replacing the light bulb AUTOMATIC CLEANING mode

Guarantee, 12

Assistance, 13

Operating Instructions

English,1

Please phone us on

08448 24 24 24

to activate your

guarantee

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

Ventilation

To ensure adequate ventilation is provided, the back panel of the cabinet must be removed. It is advisable to install the oven so that it rests on two strips of wood, or on a completely flat surface with an opening of at least 45 x 560 mm (

see diagrams

Centring and fixing

Secure the appliance to the cabinet by opening the oven door and inserting 4 screws into the 4 holes on the outer frame.

! All parts which ensure the safe operation of the

appliance must not be removable without the aid of a tool.

! Before operating your new appliance please read

this instruction booklet carefully. It contains important information concerning the safe operation, installation and maintenance of the appliance.

! Please keep these operating instructions for future

reference. Pass them on to any new owners of the appliance.

Positioning

! Keep packaging material out of the reach of

children. It can become a choking or suffocation hazard. (

see

Precautions and tips

! The appliance must be installed by a qualified

professional in accordance with the instructions provided. Incorrect installation may cause harm to people and animals or may damage property.

Built-in appliance

Use a suitable cabinet to ensure that the appliance functions properly.

• The panels adjacent to the oven must be made of heat-resistant material.

• Cabinets with a veneer exterior must be assembled with glues which can withstand temperatures of up to 100°C.

• To install the oven under the counter (

see

diagram

) or in a kitchen unit, the cabinet must

have the following dimensions:

! The appliance must not come into contact with

electrical parts once it has been installed. The indications for consumption given on the data plate have been calculated for this type of installation.

595 mm.

24 mm.

545 mm.

5 mm.

567 mm.

23 mm.

575-585 mm.

45 mm.

560 mm.

547 mm. min.

Installation

560 mm.

45 mm.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

Electrical connection

! Ovens with a three-pole power supply cable are

designed to operate with alternated current at the supply frequency and voltage indicated on the data plate (at the bottom of the oven dashboard). The earthing conductor of the cable is the yellow-green conductor.

Two types of connection are provided:Two types of connection are provided:

Two types of connection are provided:

Connection n° 1

Connecting the power supply cable to the mains.

Fit a normalized plug to the cable, which corresponds to the load indicated on the data plate; if the cooker is connected directly to the mains, an omnipolar circuit-breaker with a minimum opening of 3 mm between the contacts, suitable for the load indicated and complying with current directives, must be installed between the appliance and the mains (the earthing wire must not be interrupted by the circuit-breaker). The power supply cable must be positioned so that it does not exceed room temperature by 50°C at any point of its length. Before making the connection check that:

• the circuit breakers or fuses of the home system can support appliance load (see data plate);

• the power supply system has an efficient earthing connection which complies with the provisions of current regulations and the law;

• there is easy access to the socket or the omnipolar circuit-breaker once the cooker has been installed.

! do not use reducers, adapters or shunts as these could cause heating or burning.

Connection n° 2

Disposing of the plug.

THIS APPLIANCE MUST BE EARTHED.THIS APPLIANCE MUST BE EARTHED.

THIS APPLIANCE MUST BE EARTHED.

Ensure that before disposing of the plug itself, you make the pins unusable so that it cannot be accidentally inserted into a socket. Instructions for connecting cable to an alternative plug: ! the wires in the mains lead are coloured in accordance with the following code: Green & Yellow

-Earth-Earth

-Earth

Blue

-Neutral-Neutral

-Neutral

Brown

-Live-Live

-Live If the colours of the wires in the mains lead do not correspond with the coloured markings identifying the terminals in your plug, proceed as follows. Connect Green & Yellow wire to terminal marked “

E”

6 or coloured Green or Green & Yellow.

Connect Brown wire to terminal marked “

L” or coloured Red. Connect Blue wire to terminal marked “

N” or coloured Black. If a 13 amp plug (BS 1363) is used it must be fitted with a 13 amp fuse. A 15 amp plug must be protected by a 15 amp fuse, either in the plug or adaptor or at the distribution board.If you are in any doubt about the electrical supply to your machine, consult a qualified electrician before use.

How to connect an alternative plug

The wires in this mains lead are coloured in accordance with the following code: BLUEBLUE

BLUEBLUE

BLUE

“NEUTRAL” (N)“NEUTRAL” (N)

“NEUTRAL” (N)

BROWNBROWN

BROWN

“LIVE” (L)“LIVE” (L)

“LIVE” (L)

GREEN AND YELLOWGREEN AND YELLOW

GREEN AND YELLOW “EARTH” (E)“EARTH” (E)

“EARTH” (E)“EARTH” (E)

“EARTH” (E)

Disposing of the appliance

When disposing of the appliance please remove the plug by cutting the mains cable as close as possible to the plug body and dispose of it as described above.

The plug and socket must be easily accessible.The plug and socket must be easily accessible.

The plug and socket must be easily accessible.

GREEN & YELLOW

BROWN

BLUE

13 amp fuse

CROSS-BAR CORD GRIP

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

Control panel

GRILL

DRIPPING PAN

GUIDES for the

sliding racks

position 5

position 4 position 3 position 2 position 1

Description of the appliance

Overall view

Control panel

Display

TEMPERATURE and TIME digits

END OF COOKING

icon

CLOCK

icon

MODE icons

DURATION

icon

TIMER

icon

STOP icon

Preheating

indicator

DOOR LOCK

indicator

TIME SETTING

button

AUTOMATIC CLEANING

button

TIMER

knob

DISPLAY

SELECTOR

knob

THERMOSTAT

knob

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

! The first time you use your appliance, heat the empty oven with its door closed and at its maximum temperature for at least half an hour. Make sure that the room is well ventilated before switching the oven off and opening the oven door. The appliance may emit a slightly unpleasant odour caused by protective substances used during the manufacturing process burning away.

Setting the clock

! The clock may be set when the oven is switched off or when it is switched on, provided that the end time of a cooking cycle has not been programmed previously.

1. Press the

button several times until the icon and the first two numerical digits on the display start to flash.

2. Turn the TIMER KNOB towards “+” and “-” to adjust the hour value.

3. Press the

button again so that the other two numerical digits on the DISPLAY begin to flash.

4. Turn the TIMER KNOB towards “+” and “-” to adjust the minute value.

5. Press the

button again to confirm.

Setting the timer

! This function does not interrupt cooking and does not affect the oven; it is simply used to activate the buzzer when the set amount of time has elapsed.

1. Press the

button several times until the icon and the three digits on the display begin to flash.

2. Turn the TIMER KNOB towards “+” and “-” to adjust the minute value.

3. Press the

button again to confirm. The display will then show the time as it counts down. When this period of time has elapsed the buzzer will be activated.

Starting the oven

1. Select the desired cooking mode by turning the SELECTOR knob.

2. The oven begins its preheating stage and the preheating indicator lights up. The temperature may be changed by turning the THERMOSTAT knob.

3. When the preheating indicator

switches off and a buzzer sounds the preheating process is complete: you may now place the food in the oven.

4. During cooking it is always possible to:

- Change the cooking mode by turning the SELECTOR knob.

- Change the temperature by turning the THERMOSTAT knob.

- Set the cooking duration and the cooking end time (

see Cooking modes

- Stop cooking by turning the SELECTOR knob to the “0” position.

5. If a blackout occurs while the oven is already in operation, an automatic system within the appliance will reactivate the cooking mode from the point at which it was interrupted, provided that the temperature has not dropped below a certain level. Programmed cooking modes which have not started will not be restored and must be reprogrammed.

! There is no preheating stage for the GRILL mode.

! Never put objects directly on the bottom of the

oven; this will prevent the enamel coating from being damaged.

! Always place cookware on the rack(s) provided.

Cooling ventilation

In order to cool down the external temperature of the oven, a cooling fan blows a stream of air between the control panel and the oven door. At the beginning of the AUTOMATIC CLEANING cycle, the cooling fan operates at low speed.

! Once cooking has been completed, the cooling fan continues to operate until the oven has cooled down sufficiently.

Oven light

When the oven is not in operation, the lamp can be switched on at any time by opening the oven door.

Start-up and use

+ 11 hidden pages

Indesit FIM 88 KGP.A GB Operating Instructions Manual

Specifications and Main Features

Frequently Asked Questions

User Manual