SAFETY INSTRUCTIONS IMPORTANT TO BE READ AND OBSERVED
Before using the appliance, read these safety
instructions. Keep them nearby for future reference.
These instructions and the appliance itself provide
important safety warnings, to be observed at all
times. The manufacturer declines any liability for
failure to observe these safety instructions, for
inappropriate use of the appliance or incorrect
setting of controls.
Very young children (0-3 years) should be kept
away from the appliance. Young children (3-8years)
should be kept away from the appliance unless
continuously supervised. Children from 8years old
and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge can use this appliance only if they
are supervised or have been given instructions on
safe use and understand the hazards involved.
Children must not play with the appliance. Cleaning
and user maintenance must not be carried out by
children without supervision.
Never open the door forcibly or use it as a step.
PERMITTED USE
CAUTION: The appliance is not intended to be
operated by means of an external switching device,
such as a timer, or separate remote controlled system.
This appliance is intended to be used in household
and similar applications such as: sta kitchen areas in
shops, oces and other working environments; farm
houses; by clients in hotels, motels, bed & breakfast
and other residential environments.
Do not load the machine above the maximum
capacity (kg of dry cloth) indicated in the programme
table.
This appliance is not for professional use. Do not
use the appliance outdoors.
Do not use any solvents (e.g. turpentine, benzene),
detergents containing solvents, scouring powder,
glass or general purpose cleaners, or ammable
uids; do not machine wash fabrics that have been
treated with solvents or ammable liquids.
INSTALLATION
The appliance must be handled and installed by
two or more persons- risk of injury. Use protective
gloves to unpack and install- risk of cuts.
If you want to stack a dryer on top of your washing
machine, rst contact our After-Sales Service or your
specialist dealer to verify whether this is possible.
This is only possible if the dryer is attached to the
washing machine by means of appropriate stacking
kit available through our After- Sales Service or your
specialist dealer.
Move the appliance without lifting it by the
worktop or top lid.
Installation, including water supply (if any) and
electrical connections and repairs must be carried
out by a qualied technician. Do not repair or replace
any part of the appliance unless specically stated in
the user manual. Keep children away from the
installation site. After unpacking the appliance,
make sure that it has not been damaged during
transport. In the event of problems, contact the
dealer or your nearest After-sales Service. Once
installed, packaging waste (plastic, styrofoam parts
etc.) must be stored out of reach of children- risk of
suocation. The appliance must be disconnected
from the power supply before any installation
operation- risk of electric shock. During installation,
make sure the appliance does not damage the
power cable - risk of re or electric shock. Only
activate the appliance when the installation has
been completed.
Do not install your appliance where it may be
exposed to extreme conditions, such as: poor
ventilation, temperatures below 5°C or above 35°C.
When installing the appliance make sure that the
four feet are stable and resting on the oor, adjusting
them as required, and check that the appliance is
perfectly to level using a spirit level.
If the appliance is being installed on wood or
“oating” oors (certain parquet and laminate
materials), secure a 60x60x3cm (at least) sheet of
plywood to the oor then place the appliance on
top of this.
Connect the water inlet hose(s) to the water
supply in accordance with the regulations of your
local water company.
For cold ll only models: do not connect to the
hot water supply.
For models with hot ll: the hot water inlet
temperature must not exceed 60°C.
The washing machine is tted with transport
bolts to prevent any possible damage to the interior
during transport. Before using the machine, it is
imperative that the transport bolts are removed.
After their removal, cover the openings with the 4
enclosed plastic caps.
After installation of the device, wait a few hours
before starting it so that it acclimates to the
environmental conditions of the room.
Make sure that the ventilation openings in the
base of your washing machine (if available on your
model) are not obstructed by a carpet or other
material.
3
Health & Safety guide
Use only new hoses to connect the appliance to
the water supply. The old hose-sets should not be
reused.
The supply water pressure must be in the
01-1Mpa range.
ELECTRICAL WARNINGS
It must be possible to disconnect the appliance
from the power supply by unplugging it if plug is
accessible, or by a multi-pole switch installed
upstream of the socket in accordance with the
wiring rules and the appliance must be earthed in
conformity with national electrical safety standards.
Do not use extension leads, multiple sockets or
adapters. The electrical components must not be
accessible to the user after installation. Do not use
the appliance when you are wet or barefoot. Do not
operate this appliance if it has a damaged power
cable or plug, if it is not working properly, or if it has
been damaged or dropped.
If the supply cord is damaged, it must be replaced
with an identical one by the manufacturer, its service
agent or similarly qualied persons in order to avoid
a hazard- risk of electric shock.
CLEANING AND MAINTENANCE
WARNING: Ensure that the appliance is switched
o and disconnected from the power supply before
performing any maintenance operation; never use
steam cleaning equipment- risk of electric shock.
DISPOSAL OF PACKAGING MATERIALS
The packaging material is 100% recyclable and is marked with the recycle
symbol .
The various parts of the packaging must therefore be disposed of
responsibly and in full compliance with local authority regulations
governing waste disposal.
DISPOSAL OF HOUSEHOLD APPLIANCES
This appliance is manufactured with recyclable or reusable materials.
Dispose of it in accordance with local waste disposal regulations.
For further information on the treatment, recovery and recycling of
household electrical appliances, contact your local authority, the
collection service for household waste or the store where you purchased
the appliance. This appliance is marked in compliance with European
Directive 2012/19/EU, Waste Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of correctly, you will help prevent
negative consequences for the environment and human health.
The symbol on the product or on the accompanying documentation
indicates that it should not be treated as domestic waste but must be
taken to an appropriate collection center for the recycling of electrical
and electronic equipment.
4
User manual
PRODUCT DESCRIPTION
EN
1.
2.
7.
8.
3.
4.
5.
6.
DETERGENT DISPENSER DRAWER
Successful washing results also depend on the correct dose
of detergent: adding too much detergent will not necessarily
result in a more ecient wash, and may in fact cause
build up on the inside of your appliance and contribute to
environmental pollution.
1. Worktop
2. Detergent dispenser
3. Control panel
4. Door handle
5. Door
6. Water lter - behind plinth
7. Plinth (removable)
8. Adjustable feet (4)
! Do not use hand washing detergents because these create
too much foam.
! Use powder detergent for white cotton garments, for
prewashing, and for washing at temperatures over 60°C.
! Follow the instructions given on the detergent packaging.
Open the detergent dispenser drawer and pour in the
detergent or washing additive, as follows.
1. Compartment : Washing detergent (powder or liquid)
• If liquid detergent is used, the removable plastic
partition A (supplied) should be used for proper
dosage.
• If powder detergent is used, insert the partition into
slot B.
• The fabric softener must never exceed the “max” level
indicated on the central pin.
TECHNICAL DATA FOR WATER CONNECTION
Water connection
Water supplyCold
Water tap3/4” threaded hose connector
Minimum water supply pressure100 kPa (1 bar)
Maximum water supply pressure1000 kPa (10 bar)
5
User manual
CONTROL PANEL
1 ON/OFF button
2 START/PAUSE button and indicator
light
3 TEMPERATURE button
4 Display
5 CHILD LOCK button
6 OPTION button
7 Delayed Start button
8 SPIN button
9 WASH CYCLE SELECTOR KNOB
10 PUSH & WASH button
10
4
1
9
23
78
5
6
WASH CYCLES
Follow the instructions on the symbols of the garment’s wash care label. The value indicated in the symbol is the maximum
recommended temperature for washing the garment.
DAILY COTTON
A 30°C cycle for cotton garments. It allows for reducing
electricity consumption for heating the water while
guaranteeing good washing performance. Suitable for
lightly soiled garments.
DAILY SYNTHETICS
A 30°C cycle for synthetic garments. It allows for reducing
electricity consumption for heating the water while
guaranteeing good washing results. Suitable for lightly
soiled garments.
COLOUREDS
A 30°C cycle that helps to preserve colours, suitable
for cotton or synthetic coloured garments. It allows for
reducing electricity consumption for heating the water
while guaranteeing good washing results. Suitable for
lightly soiled garments.
DELICATES
Suitable for washing very delicate garments. It is advisable
to turn the garments inside out before washing them. For
best results, use liquid detergent on delicate garments.
RAPID 30MIN
For washing lightly soiled garments in a short time. Not
suitable for wool, silk and garments to be washed by hand.
COTTON
Suitable for washing towels, underwear, table cloths, etc.
made of resistant linen and cotton that are moderately to
heavily soiled.
SYNTHETICS
Suitable for washing moderately soiled garments made of
synthetic bres (e.g. polyester, polyacrylic, viscose, etc.) or
mixed synthetic-cotton bres.
MIXED
A 40°C cycle for washing cotton and synthetic garments
together. Suitable for lightly soiled underwear.
ECO COTTON
Suitable for washing moderately soiled cotton garments.
At 40°C and 60°C it is the standard cycle for washing cotton
garments, and is the most ecient in terms of combined
water and electricity consumption.
WHITE COTTON
For heavily soiled whites and resistant colours.
RAPID
Allows for varying the garment treatment duration from 20’
to 60’.
- 20’: this cycle refreshes your garments in just 20 minutes.
- 45’: a short cycle designed for washing mixed cotton-
synthetic garments.
- 60’: this cycle is designed to wash moderately soiled
resistant cotton garments at 60°C in an hour, with good
washing performance. For synthetic or mixed garments,
the temperature should be lowered to 40°C.
6
Loading...
+ 12 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.