INDESIT BI WDIL 75125 EU Daily Reference Guide

Quick Guide

THANK YOU FOR BUYING A INDESIT PRODUCT

In order to receive a more complete assistance, please register your product on

www.indesit.com/register

CONTROL PANEL

1. ON/OFF button

2. START/PAUSE button with indicator light

3. WASH CYCLE PROGRESS indicator lights

4. DOOR LOCKED indicator light

5. FUNCTION buttons with indicator lights

6. DRYING ONLY button with indicator light

7. DRYING LEVELS button

8. TIME DRYING button

9. TEMPERATURE button

10. WASH CYCLE knob

11. PUSH & GO button

WASH CYCLE TABLE

Before using the appliance carefully read the Safety Instruction.

Before using the machine, it is imperative that the transport bolts are removed. For more detailed instructions on how to remove them, see the Installation Guide.

Maximum load 7 kg Power input in o mode 0.5 W / in left-on mode 8 W

Maximum

load for

washing

(Kg)

Duration

(minutes)

Wash cycle

Temperature

Default Range

Maximum

spin

(r.p.m.)

1 Mixed 40°C – 40°C 1000 3,5 59

2 Cotton (2) 40°C

3 Synthetics 40°C

4 White 60°C

5 Coloureds 40°C

6 Eco cotton

(1) 60°C – 60°C 1200 7 215

7 Sport 40°C

8 Dark 30°C

9 Anti Odour 60°C

10 Delicates 30°C

11 Wool 40°C

12 Rapid 30 min 30°C

13 Wash&Dry 45 min 30°C

– 60°C 1200 7 220

– 60°C 1200 3,5 195

- 90°C 1200 7 170

– 40°C 1200 7 100

– 40°C 600 3,5 90

– 30°C 800 3 70

- 60°C 1000 3 100

– 30°C 0 1 80

– 40°C 800 1,5 70

– 30°C 800 3,5 30

– 30°C 1200 1 45

14 AirFresh - - - - 30

Rinse + Spin - - 1200 7 50

Spin + Drain * - - 1200 7 10



Required dosage  Optional dosage

Drying



Maximum

load for

drying (Kg)

3,5

1,5

3,5

Detergents and

Additives

Wash

Fabric

softener

2 3

 

   

 

   

 

   

 

Recommended

Powder Liquid

1 - - - -

5 -



5 - - - -

detergent

–

- -



The cycle duration indicated on the display or instruction manual is an estimate based on standard conditions. The actual duration may vary in relation to several factors, such as the temperature and pressure of the incoming water, ambient temperature, amount of detergent, load quantity and type, load balancing and any additional options selected.

1) Test wash cycle in compliance with regulation EN 50229 (Wash):

This cycle is designed for normally soiled cotton loads and is the most ecient in terms of both electricity and water consumption; it should be used for garments washable at 60°C. The actual washing temperature may dier from the indicated value.

Test wash cycle in compliance with regulation EN 50229 (Drying):

Select the 6 wash programme and set the drying level to for both loads. The rst drying cycle must be carried out with the nominal load.

PRODUCT DESCRIPTION

1. Top

2. Detergent dispenser drawer

3. Control panel

4. Handle

5. Porthole door

6. Drain pump

7. Adjustable feet (4)

For all testing institutes:

2) Long cotton cycle: set cycle 2 at a temperature of 40°C.

* By selecting the cycle and excluding the spin cycle, the washer-dryer will drain only.

DETERGENT DISPENSER DRAWER

Compartment 1:

Do not insert detergent in this compartment.

Compartment 2: Washing detergent (powder or liquid) Compartment 3: Additives (fabric softener, etc.)

The fabric softener must never exceed the

“max” level indicated on the central pin. ! Use powder detergent for white cotton

garments, for pre-washing, and for washing at temperatures over 60°C. ! Follow the instructions given on the detergent

packaging.

WASH CYCLES

40° 60°

Follow the instructions on the symbols of the garment’s wash care label. The value indicated in the symbol is the maximum recommended temperature for washing the garment.

Mixed

For washing lightly to normally soiled resilient garments in cotton, linen, synthetic bres and mixed bres.

Cotton

Suitable for washing towels, underwear, table cloths, etc. made of resistant linen and cotton that are moderately to heavily soiled.

Synthetics

Suitable for washing moderately soiled garments made of synthetic bres (e.g. polyester, polyacrylic, viscose, etc.) or mixed synthetic-cotton bres.

White

For heavily soiled whites and resistant colours.

Coloureds

use this programme to wash bright coloured clothes. The programme is designed to maintain bright colours over time.

Eco cotton

Suitable for washing moderately soiled cotton garments. At 60°C it is the standard cycle for washing cotton garments, and is the most ecient in terms of combined water and electricity consumption.

Sport

A cycle designed for washing lightly soiled sports clothing (tracksuits, shorts, etc.); for best results, we recommend not exceeding the maximum load indicated in the “Wash Cycle Table”. We recommend using liquid detergent and adding the amount suitable for a half-load.

Dark

use programme to wash dark-coloured garments. This programme is designed to maintain dark colours over time. We recommend using a liquid detergent for the best results when washing dark-coloured garments. When you select the drying function, at the end of the washing cycle the machine will automatically perform a delicate drying cycle that preserves the colours of the garments. The display will show the level “ ”. Max. load: 3 kg.

Anti Odour

use programme for washing garments with bad odours (e.g. smoke, sweat, fried food). The programme is designed to remove bad odours while preserving the fabric bres. Synthetics fabrics or mixed loads should be washed at 40°, and resistant cotton fabrics at 60°.

Delicates

use programme to wash very delicate garments. It is advisable to turn the garments inside out before washing them. For best results, use liquid detergent on delicate garments. When selecting an exclusively time-based drying function, a drying cycle is performed at the end of the wash cycle that is particularly delicate, thanks to light handling and appropriate temperature control of the water jet. The recommended durations are: 1 kg of synthetic garments --> 150 min 1 kg of synthetic and cotton garments --> 180 min 1 kg of cotton garments --> 180 min The degree of dryness depends on the load and fabric composition.

Wool - Woolmark Apparel Care - Blue:

The “Wool” wash cycle is approved by the Woolmark Company for washing wool garments classied as “hand-washable”, provided that the wash complies with the instructions appearing on the garment’s label and with those provided by the manufacturer of this washing machine (M1126).

Rapid 30 min

For washing lightly soiled garments in a short time. Not suitable for wool, silk and garments to be washed by hand.

Wash&Dry 45 min

select programme for washing and drying lightly soiled garments (Cotton and Synthetic) in a short time. This cycle may be used to wash and dry a laundry load of up to 1 kg in just 45 minutes. To achieve optimum results, use liquid detergent and pre-treat cus, collars and stains.

AirFresh

ideal cycle to refresh garments and remove bad odours, in particular smoke, from cotton and synthetic items in 30’ (max 1 kg) without the washing phase.

Rinse + Spin

Designed for rinsing and spinning.

Spin + Drain

Designed to spin and drain the water.

WASH CYCLE PHASE INDICATOR LIGHTS

Once the desired wash cycle has been selected and has begun, the indicator lights switch on one-by-one to indicate which phase of the cycle

is currently in progress.

Wash

Rinse

Spin/Drain

Drying

END End of Wash Cycle

DOOR LOCKED INDICATOR

When lit, the symbol indicates that the door is locked. To prevent any damage, wait until the symbol turns o before opening the door. To open the door while a cycle is in progress, press the START/PAUSE button; if the indicator light is o, the door can be opened.

FIRSTTIME USE

Once the appliance has been installed, and before it is used for the rst time, run a wash cycle with detergent and no laundry, by setting the “Auto-Clean” cycle.

DAILY USE

Prepare the laundry by following the suggestions appearing under the “TIPS AND SUGGESTIONS” section.

Rapid programming

- Open the door. Load the laundry while making sure not to exceed the maximum load quantity indicated in the cycle table.

- Pull out the detergent dispenser drawer and pour the detergent into the relevant compartments as described in “DETERGENT DISPENSER DRAWER section”.

- Close the door.

- Press the PUSH & GO button to start the wash cycle.

Traditional programming

- Turn the washing machine on by pressing the ON/OFF button. All the indicator lights will light up for a few seconds, then only the lights corresponding to the settings for the selected wash cycle will remain lit; the START/PAUSE indicator light will also ash.

- Open the door. Load the laundry while making sure not to exceed the maximum load quantity indicated in the Wash Cycle Table.

- Pull out the detergent dispenser drawer and pour the detergent into the relevant compartments as described in “DETERGENT DISPENSER DRAWER” section.

- Close the door.

- Set the WASH CYCLE knob to the desired cycle.

- Modify the temperature: pressing the reducing the temperature down to the cold wash level ( ).

- Select the desired wash cycle.

- Select the desired options.

- Press the START/PAUSE button to start the wash cycle; the relative indicator light will light up steady green and the door will lock ( indicator light on).

button allows for gradually

PAUSING A CYCLE

To pause the wash cycle, press the START/PAUSE button again; the indicator light will ash . If the indicator light is not lit, the door may be opened. To start the wash cycle from the point at which it was interrupted, press the START/PAUSE button again.

OPENING THE DOOR, IF NECESSARY

Once a cycle starts, the indicator light turns on to signal that the door cannot be opened. While a wash cycle is running, the door remains locked. To open the door while a cycle is under way, for example, to add or remove garments, press the START/PAUSE button to pause the cycle; the indicator light will ash . If the indicator light is not lit, the door may be opened. Press the START/PAUSE button again to continue the cycle.

CHANGING A RUNNING WASH CYCLE

To change a wash cycle while it is in progress, pause the washing machine using the START/PAUSE button (the relative indicator light will ash ), then select the desired cycle and press the START/PAUSE button again. ! To cancel a cycle that has already begun, press and hold the ON/OFF button. The cycle will be stopped and the machine will switch o.

END OF THE CYCLE

Once the cycle terminates the END indicator light will light up; when the

indicator light switches o, the door may be opened. Open the door, unload the laundry and switch o the machine. If you do not press “ON/ OFF” button, the washing machine will switch o automatically after about a half of an hour. Close the water tap, open the door and unload the washing machine. Leave the door ajar to allow the drum to dry.

+ 2 hidden pages