Datasheet
10 I/Os Digital Module
CPU ESP32
013002000100
MODEL TYPE
I max.
External power supply
SRAM
Shock resistance
Digital Input
(24Vcc) - (x10)
Digital Isolated
Output (24Vcc) (x10)
Expandability
Input Voltage
Power supply voltage DC power supply
DC power supply
DC power supply
Power supply voltage
Power supply out .cap.
Size
PSRAM
Ambient temperature (operating) 0º to 60ºC
Input rated voltage
Operating voltage range
Clock Speed
Insulation resistance
Communications
Ambient humidity (operating)
10% to 90% (no condensation)
Rated Power
Power consumption
External Flash Memory
Dielectric strength
USB consideration!
Ambient environment (operating)
Power supply holding time
Ambient temperature (storage)
Weight
With no corrosive gas
2ms min.
-20º to 60ºC
350g max.
PLC 10 I/Os Digital Module CPU ESP32
1.5A
24Vdc
4MB
3.3 to 24 Vdc
Input Impedance: 27K
Separated PCB ground
Rated Voltage: 10Vac
220 Vac (3 – 48 Vdc)
Input Impedance: 54K
Rated Voltage: 220 Vac
Imin: 2 to 12 mA
Opto-isolation
Rated Voltage: 24 Vdc
Antipolarity +
Overcurrent (220 Ac)
24 Vdc (23,2 Vdc)
Imax: 300 mA
Optro-isolation
Rated Voltage: 24Vdc
Imax 24Vdc: 1 A
ModbusRTU RS485: 32 elements - USB - Ethernet Wifi - BLE
12 to 24Vdc (Fuse protection (2.5A) Polarity protection)
12 to 24Vdc
Cannot be working in a final application
100x45x115
300mA
2MB
24Vdc
11.4 to 25.4Vdc
8MHz
20MΩ min.at 500Vdc between the AC
terminals and the protective earth terminal.
80m/s2 in the X, Y and Z direction
2 times each.
USB, RS485, Ethernet, WiFi, BLE
30 W
30 W MAX.
4MB
2.300 VAC at 50/60 Hz for one minute with a
leakage current of 10mA max.
Between all the external AC terminals and the
protective ground terminal.
Only for uploading or debugging. NOT connected as a serial
CONECTABLE PLC ARDUINO 24Vcc 10 I/Os
Technical Features
General Features
INPUTS (x10)
OUTPUTS (x10)
DataSheet Rev. 20201007
A ZONE
Pinout
013002000100
Performance Specifications
Arduino Board
Control method
I/O control method
Programming language
Microcontroller
The steps to follow to install our equipment’s to Arduino IDE
are:
•Open the Arduino IDE, versión 1.8.0 or superior. If you don’t have it
yet , you can download here
https://www.arduino.cc/en/Main/Software .
• Press the “Preferences”option to “File” menu and open the
preferences window.
• In the text box “Additional boards manager URLs”, add the direction:
http://apps.industrialshields.com/main/arduino/boards/package_ind
ustrialshields_index.json
• Close the preferences window with the “OK” button.
ESP32 DevKit C (3,3V)
Stored program method
Combination of the cyclic scan and immediate refresh processing methods.
Arduino IDE. Based on wiring (Wiring is an Open Source electronics platform composed of a programming language. “similar to the C”)
ESP32
http://arduino.cc/en/Tutorial/HomePage
013002000100
WarningsInstall Arduino IDE and the Industrial Shields boards
Unused pins should not be connected. Ignoring the directive may damage the
controller.
Before using this product, it is the responsibility of the user to read the
product’s User Guide and all accompanying documentation.
Industrial Shields PLCs must be powered between 12Vdc and 24Vdc. If a
higher voltage is supplied to the equipment can suffer irreversible damage.
Maintenance must be performed by qualified personnel familiarized with the
construction, operation, and hazards involved with the control.
Maintenance should be performed with the control out of operation and
disconnected from all sources of power.
The Industrial Shields Family PLCs are Open Type Controllers. It is required
that you install the M-Duino PLC in a housing, cabinet, or electric control
room. Entry to the housing, cabinet, or electric control room should be limited
to authorized personnel.
• Click on “Tools” menu, and open the “Boards” submenu, and click the
“Boards Manager” option, to open the Boards Manager window.
• Search “industrialshields” to the search filter and select to the list and
click “Install”
• Close the “Boards Manager". Once it is performed that steps, you are
available to select each PLC that you wish to work on “Tools” ->
“Boards” : M-Duino…
To get more information:
https://www.industrialshields.com/first-steps-with-the-industrialarduino-based-plc-s-and-the-panel-pc-s-raspberry-pi-based#boards
Inside the housting, cabinet or electric control room, the Industrial Shields
PLC must be at a minimum distance from the rest of the components of a
minimum of 25 cm, it can be severely damaged.
Failure to follow these installation requirements could result in severe
personal injury and/or property damage. Always follow these requirements
when installing M-Duino family PLCs.
In case of installation or maintenance of the M-Duino please follow the
instructions marked in the Installation and Maintenance section on the User
Guide.
Do not disconnect equipment when a flammable or combustible atmosphere
is present.
Disconnection of equipment when a flammable or combustible atmosphere
is present may cause a fire or explosion which could result in death, serious
injury and/or property damage.
Symbology Technical Support
Indicates that the equipment is suitable for direct current only; to
identify relevant terminals
Indicates that the equipment is suitable for alternating current
only; to identify relevant terminals
You can contact with us using the best channel for you:
support@industrialshields.com
@
www.industrialshields.com
To identify the control by which a pulse is started.
To identify an earth (ground) terminal in cases where neither the
symbol 5018 nor 5019 is explicily required.
To identify the switch by means of which the signal lamp(s) is
(are) switched on or off.
CE marking indicates that a product complies with applicable
European Union regulations
Visit our Blog, Forum orTicketing system
34 644 927 900
Use our chat service
Indicates a potentially hazardous situation which,
if not avoided, could result in death or serious injury
To indicate hazards arising from dangerous voltages
Check the user guides
Visit our Channel
Loading...