Incriminator Audio IA20.1 Owner's Manual

OWNER'S MANUAL

IA20.1

"No Chrome, No Carbon Fiber, No BS!! Period...."

http//www.incriminatoraudio.com

Digital Class-D Linkable Mono Block Amplifier

Before operating this unit, please read this manual and keep it for future reference

-1-

Congratulations, and thank you for your purchase of Incriminator Audio amplifiers.

Like all of IA's products, the 20.1 series amplifier was designed with only one thing in mind.....Performance!

The new 20.1 has been completely redesigned, and comes with many performance upgrades.

The first and major upgrade you will notice when you opened the box should be the new case design.

You may be surprised to see that the new amplifier has grown SMALLER in size.

Don t be alarmed, smaller doesn t always mean less performance.

In fact, IA believes smaller can mean bigger! New technology has allowed us to use fewer and smaller

parts on the board and in effect, has allowed the amps to become more efficient using our multi-layering

technology to protect themselves better than ever, bullet proof technology is here to stay.

Once again congratulations, and THANK YOU for being a valued Incriminator Audio customer!

Contact us:

Incriminator Audio

2935 Hwy. 101 N

Rogersville, AL 35652

[phone]

http://www.incriminatoraudio.com

FEATURES & SPECIFICATIONS

-2-

Digital Class-D Linkable Mono Block Amplifier

Exclusive Bullet Proof Technology Layering

Daisy-Chain Through Output RCA for Strapping

1 ohm Stable and 2 ohms Stable when Strapped

Dual MOS-FET PWM Power Supplies

24 dB Low Pass (LPF) Crossover Variable - 35 Hz to 250 Hz

24 dB Subsonic Filter Variable - 10 Hz to 60 Hz

Selectable Switch for Master and Slave Operation

Multi-Layer Protection - Speaker Short, Over Current, Thermal, and DC Protection Circuit

Line Input and Master Output / Slave Input RCA Connectors

Heavy Duty Copper Layer Double Sided Epoxy PCB

0 Gauge Battery Input Connectors

8 Gauge Speaker Output Connectors

100% QC Testing and Warm Up

Efficiency: 86% at 4 ohms, 100 Hz

Tested Voltage & THD : 14.4V and Less Than 1% THD at 4 ohms RMS Watt

Operating Voltage: DC 10V ~ 16V Power Input

Damping Factor: 350+ into 1 ohm

Input Sensitivity 200mV to 6 Volts

Rated Power Output RMS:

3600 watts at 1 ohm Linked

1800 watts at 1 ohm

900 watts at 2 ohms

450 watts at 4 ohms

Dimensions- 7.00 (W) x 2.25 (H) x 17.75 (L)