InCarTec ICT-A500B User Manual

CAR AUDIO DSP AMPLIFIER

ICT-A500B

Thank you for purchasing the ICT-A500B

To maximize the performance of this DSP amplifier and your complete car audio system
installation, we recommend that you acquaint yourself thoroughly with all technical
features and controlling options of this DSP amplifier. Please read this manual carefully
before attempting the installation. If, after reading this manual, you still have questions
regarding functions or the installation of the DSP amplifier, we recommend that you
consult your dealer.

Safety information

Do not turn on any function which may distract you while driving the vehicle.

Functions requiring sustained attention must only be used when the vehicle is at

a complete standstill. Make sure to always stop your vehicle in a safe place
before operating these functions. There is a risk of causing an accident.

Keep the volume at a low level to be able to hear exterior noises while driving
the vehicle. There is a risk of causing an accident.

Do not open the DSP amplifier or undertake any modification of the product.
There is a risk of accident, fire or electric shock.

Only use this DSP amplifier with 12V mobile applications. Any other use other
than the use for which this product has been designed may lead to fire, electric

shock or injury.

Use fuses of the correct amperage. There is a risk of fire or electrocution.

Do not obstruct radiators and/or vents. Internal overheating may occur and
cause a fire.

Ensure all connections are properly made. Check the section of cable and the
type of cable if it does not correspond with the use. There is a risk of fire, injury
and/ or damage to the product.

Do not use nuts or fasteners part of the steering or braking systems for ground
connection. The fasteners and nuts used for the brake and steering systems (or
any other security system) as well as various tanks must never be used for

grounding.

Use of these parts as ground may deactivate the vehicle’s control system and
cause a fire or other technical problem.

Keep all small objects which could be swallowed, such as the fasteners and
screws, out of the reach of children. Swallowing such objects may cause
serious injuries. In the event of swallowing any of these objects, immediately
seek medical advice.

Before starting the installation, disconnect the negative terminal of the
battery to avoid any risk of injury, fire or damage to the equipment.

Features

● 5-channel Car DSP Amplifier with IOS or Android App tuning audio DSP

functions

● Bluetooth Streaming for HD music

● 7 band parametric EQ for each channel (20Hz-20KHz)

● Q factor change for each band of parametric EQ

● 3 way active crossover, selectable from By-pass, Low-pass, Hi-pass and

Band-pass

● Time alignment in "cm” for 4 channel output from 0 to 230 cm

● Dynamic Bass setting

● Phase, Mute setting for all speakers

● Gain setting for each channel

● 5 user favorite memory for sound setting

● The Sound setting can be saved to the amplifier or the phone

● Line out for Front speakers, Rear speakers and Subwoofer

Specifications

This DSP amplifier play a music from high level input or from Bluetooth
Streaming.

● Output power(MAX): 4 x 54Watts & 1 x 300Watts

● Frequency response: 20 Hz ~ 20 kHz

● Audio sampling frequency: 192 kHz

● Distortion: 1 KHz <0.01%

● Supply voltage range: 9 V – 15 V

● Signal to noise ratio: > 120 dB

● Dynamic range: > 100 dB

● Standby current: 0 mA

● Dimensions (LxWxH): 182( 207 ) x 134 x 48.5mm