inbody R20 User Manual

Thank you for purchasing InBody R20

Ⓑ

.

Please read this manual carefully and use it with proper operation.

Keep it handy for future reference.

✽This product is medical equipment.

ⓒ 1996- Biospace Co., Ltd. All rights reserved.

Notice

This user’s manual cannot be copied, translated or transformed into different media without a prior

written consent from Biospace Co., Ltd, according to the copyright laws. This user’s manual and

product pertinent to this manual may have misprints or technical flaws, which can be modified

without prior notice to the readers. Biospace is not liable for any damage caused by a failure to meet

the requirements in this user’s manual.

Biospace Co., Ltd. [Head office]

518-10, Dogok 2-Dong, Gangnam-gu, Seoul 135-784, Korea

TEL : [phone]

FAX : [phone]

Homepage: http://www.inbody.com

E-mail: [e-mail]

Acknowledgements

Biospace, InBody, Lookin’ Body are the registered trademarks of Biospace Co., Ltd.

The names of the companies and products in this manual other than those of Biospace Co., Ltd. are

the trademarks of the companies. Stating the products of other companies is strictly for the purpose

of providing information, and not to guarantee or recommend the products. Biospace is not

responsible for the performance or the use of these products.

Biospace reserves the right to modify the dimensions or exterior of InBody R20Ⓑ to improve the

quality of the products, without consent of the customer.

BM-ENG1C-A5-B-120829

Introduction

Body Composition consists of 4 major components: Water, Protein, Minerals and Fat. These four

elements are the fundamental ingredients the body is comprised of, and it is important for them to be

in balance. Body composition analysis is expected to quantify and measure these ingredients.

Until recently, diagnosing obesity has focused on appearance, without considering a balanced body

composition. For more reasonable healthcare, accurate body composition analysis must be

performed first, to achieve the balance of the four major body components.

Biospace has earned international recognition for technical expertise demonstrated through the

InBody series. Based on the experience and technology over the last 15 years, Biospace has

released the body composition analyzer, the InBody R20Ⓑ.

InBody is highly recognized for its world-best technological excellence by many customers in more

than 40 different markets including the US, European countries, Japan, and more. The strong brand

is well-known among medical professionals as well as academic communities, and now it is the time

for you to meet InBody at your place. Enjoy healthy lifestyle with InBody!

Kichul Cha, CEO

Contents

How to use this manual Ⅰ

Safety Information Ⅱ

Indicators & Safety Symbols Ⅵ

Workplace Requirements Ⅶ

Notice Ⅷ

1. Product Package 1

2. How to Insert the Batteries and Get Started 2

3. Installation PC program 3

4. Connecting InBody R20Ⓑ and PC 10

5. Configuration 14

6. InBody Test mode 16

7. Weight Measurement mode 21

8. Maintenance 22

9. Understanding of Results 23

10. Error messages 31

11. One-minute check before calling for service 32

Appendix 34

✽ More about the InBody R20Ⓑ

✽ Specifications

✽ Customer Service Information

I

How to use this manual

This user’s manual explains the functions of the InBody R20

Ⓑ

.

Follow the instructions below for effective use this manual.

1. Please read all the instructions in this manual thoroughly before operation.

2. Fully utilize the helpful materials, such as the diagrams and illustrations, to get a clear

understanding of the product.

3. Before calling Biospace for assistance,

please refer to “ Chapter 11. One-minute check before calling for service ”.

4. If you have clinical issues while using the InBody R20Ⓑ, please contact us using the e-mail

address as shown below.

E-mail : [e-mail] TEL: [phone]

5. Most importantly, please read the instructions and become familiar with the following notations:

Information

1. This product has been designed, manufactured, and inspected under the full quality assurance

system of Biospace. Biospace fulfills European MDD(Medical Device Directive), and InBody R20Ⓑ

has acquired the CE conformity marking.

2. This equipment may cause the above mentioned medical devices to malfunction.

3. This equipment may cause harmful interference to other devices in the vicinity if not installed and

used in accordance with the installation specifications. However, there is no guarantee that the

interference will not occur for a particular installation.

4. The InBody R20Ⓑ has been designed, manufactured, and inspected under the full quality

assurance system of Biospace. Biospace fulfills the international standardization system, ISO 90001

and ISO 13485.

5. The InBody R20Ⓑ fulfills the Standards of IEC60601-1(EN60601-1), Safety of Electric Medical

Equipment. In addition, the InBody R20Ⓑ complies not only with Level A for Noise Immunity, but also

with Level A for Noise Emission by the Standard IEC60601-1-2(EN60601-1-2), Electromagnetic

Compatibility Requirements.

II

Safety Information

The important information to warn you of situations which might cause major injury and/or damage to property if

instructions are not carefully followed.

The important information to warn you of situations which might cause minor injury and/or damage to property if

instructions are not carefully followed.

The important and helpful information for operation.

Make sure not to use this equipment with medical electrical devices, such as a pacemaker.

NO USAR USARLO CON EQUIPO MEDICO ELECTRONICO ASI COMO CON MARCAPASOS.

Keep this equipment away from liquid.

MANTENER USARLO LEJOS DEL AGUA.

Do not aggressively grab the hand electrode/bar.

NO AGARRAR LOS ELECTRODOS DE MANO FUERTEMENTE.

III

1. Do not use this equipment in combination with the following electronic medical devices.

- Medical devices, such as a pacemaker

- Electronic life support systems, such as an artificial heart/lung

- Portable electronic medical devices, such as an electrocardiograph.

2. Physically disabled persons or children should not attempt to take measurements alone, but

instead should get help by having manager or guardian hold them from the side or the back not to

slip or to measure incorrectly.

3. Do not dismantle the equipment or open the back cover. Internal parts are not for customer use. If

the equipment is dismantled, the warranty is void, and service costs will be charged. If service is

required, contact Biospace or the supplying agency.

4. When connecting peripherals (optional devices) to the InBody R20Ⓑ, turn on the power of the

peripherals before turning on the InBody R20Ⓑ. When turning the power off, turn off the InBody

R20Ⓑ before turning off the peripherals. This process will minimize the harm to the equipment

caused by electrical shock.

5. You may slip off the device if you step on it with wet feet.

6. The arm consists of a hand electrode. Do not force the arm in the wrong direction. The resulting

damage may affect the functioning of the internal cable and circuit board.

7. Individuals with any kind of contagious disease or any kind of injury on the palm of their hand or

sole of their foot should not come in contact with this product.

8. Never start weight reduction or exercise therapy without instruction from a physician or a specialist.

Self-diagnosis may damage your health. Consult with your physician first.

9. This equipment is specifically designed to analyze body composition. Use the equipment only for

its intended use as described in this manual.

10. Follow local governing ordinances and recycling plans regarding the disposal or recycling of

device components.

IV

1. Cross Contamination

Individuals with any kind of contagious disease or infection must not use or come in contact with

the platform or this product. Please be sure to clean the platform with appropriate disinfectant after

each use. Never pour any liquid directly on the platform, as it may leak and cause internal damage.

Use a soft cloth and appropriate ethyl alcohol to wipe off the platform. Do not wipe the platform with

strong chemicals.

2. While moving, installing or using this product, be sure to protect it against any physical shock or

damage. Always use the packing material and the original shipping box when moving or

transporting this product.

3. Always operate this product within prescribed ranges of temperature, humidity, and pressure.

Operating in ranges outside of those specified may affect the operation of this product and may

cause malfunctions.

4. Be careful not to spill or drop any residues of food or beverages on this product. It may cause

serious damage to the electronic components.

5. Cleaning

Keep the platform and control panel clean by wiping them with disinfectant. Never pour any liquid

directly on the platform, Use a soft cloth and appropriate ethyl alcohol to wipe off the platform. Do

not wipe the platform with strong chemicals.

6. Wipe up gently the platform and control panel of the product with a soft cloth for disinfectant.

7. Install or locate equipment only in accordance with the provided installation instructions.

8. This equipment should be serviced only by qualified personnel. Contact Biospace for any

Customer Service issues.

9. Please use your hands to operate buttons. Using feet may lead to malfunction of buttons.

V

1. This equipment may cause the above mentioned medical devices to malfunction.

This equipment may cause harmful interference to other devices in the vicinity, if not installed and

used in accordance with the installation specifications. However, there is no guarantee that the

interference will not occur for a particular installation.

2. Do not dismantle the product. Internal parts are not for customer use. If the unit is dismantled, the

warranty is void, and service costs will be charged to you. If service is required, contact Biospace

or the supplying agency.

3. This product should be serviced only by qualified service personnel. Contact Biospace for

examination, repair or adjustment.

4. Do not move the equipment with the power on.

5. Do not jump or shock on the platform, these may cause an incorrect measurement or malfunction.

VI

Indicators & Safety Symbols

Disposal of old Electrical & Electronic Equipment

(Application in the European Union and other European countries with separate collection
system)

This symbol indicates that this product shall not be treated as household waste. Instead, it shall

be handed over to the applicable collection point for the recycling of electrical and electronic

equipment. By ensuring this product is disposed of correctly, you will help prevent potential

negative consequences for the environment and human health, which could otherwise be

caused by inappropriate waste handling of this product. For more detailed information about

recycling this product, please refer to local governing ordinances and recycling plans.

Follow local government ordinances and recycling instructions regarding disposal or recycling of device components,
including batteries.

VII

Workplace Requirements

□ Operation Environment

Temperature range : 10 ~ 40 ℃ (50 ~ 104 )℉

Relative humidity : 30 ~ 75 %

Atmospheric pressure range : 70 ~ 106 kPa

□ Storage Environment

Temperature range : -20 ~ 70 ℃ (-4 ~ 158 )℉

Relative humidity : 10 ~ 95 % (No condensation)

Atmospheric pressure range : 50 ~ 106 kPa

□ Battery

Rating

: AA Type Battery(DC 1.5V X 4EA)

VIII

Notice

Please read thoroughly and follow the instructions.

1. Please do not press or with other object on the platform.

2. Please use your hands to operate buttons. Using feet may lead to malfunction of buttons.

3. Please be sure to avoid keeping or using InBody in wet area, i.e. bathroom. It may cause

malfunction of the device.

4. You may slip off the device if you step on it with wet feet.

5. Please wrap InBody and keep it level while storing for a long period. If you have it stand upright, it

may cause errors later.

6. Please remove the batteries from the device while not in use for a long time. It may cause

corrosion when left in contact with the device.

(Please follow the instruction in reverse order of ‘ Chapter 2. How to Insert the Batteries and Get

Started’ )

1

1. Product Package

When opening the box, check to make sure all the following items are included.

Included Items

① InBody R20

Ⓑ

② Quick Installation Guide

③ Battery (AA 1.5 V X 4 EA)

④ Lookin’Body110_R20 & User’s Manual

⑤ Bluetooth dongle

To prevent physical shock, use Biospace’s packing material when shipping or transporting the equipment.

2

2. How to Insert the Batteries and Get Started

< Rear part>

① ② ③

1) Open the battery cover at the bottom of the device.

2) Insert the batteries AA 1.5 V X 4 EA) in right direction.

3) Close the battery cover until it clicks.

4) Turn the R20 on with or

: Press button for InBody Test, or press button for measuring weight.

Battery is low when is still on after you turn on InBody R20Ⓑ.

Please replace the batteries when is blinking after you turned on InBody R20Ⓑ.

Please remove the batteries from the device while not in use for a long time.

(It may cause corrosion when left in contact with the device.)

3

3. Installation PC program

Lookin’Body110_R20 program CD from product package.

 PC System Requirements

Operating System : Windows XP(SP2) / VISTA Compatible / Windows 7

CPU : Above Intel Pentium4 1Ghz, Compatible with IBM-PC

HDD : Enough space for 200MB or more

Main Memory(RAM) : 512MB or Above Recommended

Graphic Devices : Supporting 1024X768 of Resolution, 32bit Color or Above Recommended

Input Devices : Keyboard, Mouse

Communication Port : Bluetooth

1) Do not connect Bluetooth dongle to computer before the program installation. If other

Bluetooth related driver is already installed, please delete it.

2) Installation program will be automatically running and start installation process when the

Lookin’Body110_R20 is inserted.

If automatic running is failed, please run setup.exe file at CD-ROM.)

3) In case “ .NetFrameWork2.0 “ is not installed in PC,

please install “ .NetFrameWork2.0 “ first. Complete the installation following the guide

message. If “ .NetFrameWork2.0 “ is already installed, please go to 4).

If a message comes up saying that the installation is impossible, it is highly probable due to the virus at PC. Please
install again after virus cure.